Multichemical defense of plant bugHotea gambiae (westwood) (Heteroptera: Scutelleridae)

Chemical defense in larvae of the plant bugHotea gambiae has been investigated. Results of analyses (GC, GC-MS) on the secretions from the three dorsally situated larval abdominal defense (scent) glands are reported. The secretion from the first abdominal gland consists of a mixture of C₁₀ and C₁₅ isoprenoids: (C₁₀) -pinene, -pinene, limonene, -phellandrene; (C₁₅) -caryophyllene, caryophyllene oxide, -humulene, and (the major component) humulene epoxide II. The secretions from the second and third abdominal glands are similar mixtures consisting of (E)-2-decenal, (E)-4-oxohex-2-enal, andn-tridecane together with lesser amounts of (E)-2-hexenal,n-dodecane, and other materials. Isoprenoid defense is now known from four species of plant bugs (Heteroptera) associated with Malvaceae.     

Electrosynthesis of 4,4′-dinitroazobenzene on PbO2 electrodes

Parameters which affect the electrosynthesis of 4,4-dinitroazobenzene from p-nitroaniline on platinum and PbO₂ electrodes were investigated and optimum conditions were determined. Maximum conversion efficiency for electrosynthesis was 95% with a pure -PbO₂ electrode. It was found that the electrocatalytic activity of a PbO₂ electrode depends upon its / ratio and its degree of crystallinity. The effects of the added base and water on the conversion efficiency were also elucidated.     

<Emphasis Type="Italic">Vitex agnus-castus</Emphasis> is a Preferred Host Plant for <Emphasis Type="Italic">Hyalesthes obsoletus</Emphasis>

Hyalesthes obsoletus Signoret (Homoptera: Cixiidae) is a polyphagous planthopper that transmits stolbur phytoplasma (a causative agent of yellows disease) to various weeds, members of the Solanaceae, and wine grapes (Vitis vinifera L.) in Europe and the Middle East. Planthoppers were collected by hand vacuuming eight native plant species. Vitex agnus-castus L., a shrub in the Verbenaceae, hosted the largest number of H. obsoletus, although Olea europaea L. also served as a host for adults. Using a Y-olfactometer, we compared the planthoppers relative preference for V. agnus-castus, Convolvulus arvensis, and V. vinifera. V. agnus-castus was more attractive to both male and female H. obsoletus than the other plants. H. obsoletus antennal response was stronger to volatiles collected from V. agnus-castus than from Cabernet Sauvignon variety of V. vinifera. To determine if V. agnus-castus would serve as a reservoir for the pathogen, H. obsoletus were collected from leaf and stem samples of native V. agnus-castus, and were tested by polymerase chain reaction (PCR) for the presence of phytoplasma DNA. While 14% and 25% (2003 and 2004, respectively) of the insects tested positive for phytoplasma DNA, none of the plant samples tested positive. To determine if V. agnus-castus could serve as a host plant for the development of the planthopper, we placed emergence cages beneath field shrubs and enclosed wild-caught H. obsoletus in a cage with a potted young shrub. We found adult H. obsoletus in the emergence cases and planthopper nymphs in the soil of the potted plant. We concluded that V. agnus-castus is attractive to H. obsoletus, which seems to be refractory to phytoplasma infections and warrants further testing as a trap plant near vineyards.     

Factors governing the electrochemical synthesis of α-nickel (ii) hydroxide

The electrodeposition of -nickel hydroxide is promoted by the simultaneous chemical corrosion of the electrode by an acidic nitrate bath. Chemical corrosion results in the formation of a poorly ordered layered phase which is structurally similar to -nickel hydroxide and provides nucleation sites for the deposition of the latter. Therefore under conditions which enhance corrosion rates such as low current density (<1.3 mA cm–2), high temperature (60 C), high nickel nitrate concentration ( 1M) and the resultant low pH (1.7), -nickel hydroxide electrodeposition is observed, while -nickel hydroxide forms under other conditions. Further, -nickel hydroxide deposition is more facile on an iron electrode compared to nickel or platinum.     

Effects of biotic and abiotic stress on induced accumulation of terpenes and phenolics in red pines inoculated with bark beetle-vectored fungus

This study characterized the chemical response of healthy red pine to artificial inoculation with the bark beetle-vectored fungusLeptographium terebrantis. In addition, we sought to determine whether stress altered this induced response and to understand the implications of these interactions to the study of decline diseases. Twenty-five-year-old trees responded to mechanical wounding or inoculation withL. terebrantis by producing resinous reaction lesions in the phloem. Aseptically wounded and wound-inoculated phloem contained higher concentrations of phenolics than did constitutive tissue. Trees inoculated withL. terebrantis also contained higher concentrations of six monoterpenes,-pinene,-pinene, 3-carene, limonene, camphene, and myrcene, and higher total monoterpenes than did trees that were mechanically wounded or left unwounded. Concentrations of these monoterpenes increased with time after inoculation. Total phenolic concentrations in unwounded stem tissue did not differ between healthy and root-diseased trees. Likewise, constitutive monoterpene concentrations in stem phloem were similar between healthy and root-diseased trees. However, when stem phloem tissue was challenged with fungal inoculations, reaction tissue from root-diseased trees contained lower concentrations of-pinene, the predominant monoterpene in red pine, than did reaction tissue from healthy trees. Seedlings stressed by exposure to low light levels exhibited less extensive induced chemical changes when challenge inoculated withL. terebrantis than did seedlings growing under higher light. Stem phloem tissue in these seedlings contained lower concentrations of-pinene than did nonstressed seedlings also challenge inoculated withL. terebrantis. It is hypothesized that monoterpenes and phenolics play a role in the defensive response of red pine against insect-fungal attack, that stress may predispose red pine to attack by insect-fungal complexes, and that such interactions are involved in red pine decline disease. Implications to plant defense theory and interactions among multiple stress agents in forest decline are discussed.To whom correspondence should be addressed at USDA Forest Service, 2500 Shreveport Hwy., Pineville, Louisiana 71360.     

Synergistic Effect of Ethanol to α-Pinene in Primary Attraction of the Larger Pine Shoot Beetle, Tomicus piniperda

-Pinene and ethanol were released in the approximate proportions 1:0.1, 1:0.9 and 1:9 (at 21°C). Ethanol, released in the range of 3–279 mg/day, generally synergized the attraction of T. piniperda to -pinene (30 mg/day at 21°C), although attraction to the mixtures varied within and between years. The low release rate of ethanol together with -pinene attracted a significantly higher number of beetles than -pinene alone in 1995, April of 1996, and in 1997. Lures with the medium release rate of ethanol were the most attractive only in March of 1996. The high dose of ethanol significantly synergized attraction to -pinene in 1995 and 1997. The variable attraction of T. pinipeda to ethanol and -pinene at various release rates and proportions may be due to the temperature dependent nature of beetle antennal sensitivity. At ambient temperatures of 10–13°C. T. piniperda was most attracted to the lures with -pinene and high release rates of ethanol, at 14–17°C it was most attracted to those with medium release rates of ethanol, and at 18°C and higher it was most attraacted to those with low release rates of ethanol.     

Additional male mediterranean fruitfly (Ceratitis capitata wied.) Attractants from Angelica seed oil (Angelica archangelica L.)

Two sesquiterpene hydrocarbons, -copaene and -ylangene, were isolated from bioactive fractions of angelica seed oil and were shown by field bioassays to be attractive to the male Mediterranean fruit fly. Their relative attractiveness, compared with the(+)-and (–)--copaene enantiomers, are: (+)--copaene>angelica -copaene>angelica -ylangene>(–)--copaene. The enantiomer ratios for the two compounds are: -copaene, 61.4% (+), 38.6% (–); -ylangene, 91.9% (+), 8.1% (–).trans--Bergamotene was also isolated from the same fractions, but in sufficient quantity for bioassay [enantiomer ratio: 95.7% (+), 4.3% (–)].     

Investigation of sex pheromone components of female asian corn borer,Ostrinia furnacalis (Hübner) (Lepidoptera: Pyralidae) in Taiwan

(E)-12-Tetradecenyl acetate (E12–14OAc), (Z)-12-tetradecenyl acetate (Z12–143nOAc), and tetradecanyl acetate (14OAc) were extracted and identified as major chemical components from female tips of the Asian corn borer,Ostrinia furnacalis (Hübner) (Lepidoptera: Pyralidae) in Taiwan, with a combined wash ratio of 483715 and an individual female ratio of 453916. The average amount ofE12-,Z12–14OAc and 14OAc in each female gland was 6.6±4.6, 5.8±3.5, and 2.4±1.7 ng/female, respectively. The mixture of these three synthetic chemicals not only gave strong activities in male antennae but also could catch significantly more males than virgin females in field-trapping tests. The field test also showed no significant difference in trapping ability among the three-component Taiwan formulations, the two-component Taiwan formulation (Z12–14OAc andZ1214OAc, 5347), and the Japan formulation (Z12–14 OAc andE 12–14OAc, 3:2).     

Suppression of the α → β-nickel hydroxide transformation in concentrated alkali: Role of dissolved cations

The presence of dissolved cations such as Al and Zn in alkaline electrolyte (6 M KOH) suppresses the -nickel hydroxide transformation. The uptake of Al (10 mol%) and Zn (30 mol%) exhibited by the active material likely stabilizes the -phase. Dissolved Al is deleterious to the performance of the nickel hydroxide electrode, whereas, dissolved Zn enhances the specific discharge capacity of nickel hydroxide by approximately 25% showing that the mode of metal uptake is different in the two cases.     

Crystal Orientation Dependence of Macropore Formation in n-Si With Backside-Illumination in HF-Electrolyte

The formation of macropores on anodically biased n-type silicon with backside-illumination was investigated as a function of crystal orientation and bias voltage. Specimens were cut from bulk crystals with various orientations from {100} to {111}, polished and subjected to anodic etching in HF. The resulting pores were investigated on cleaved samples by SEM. All pores were found to grow in either a 100 direction or a 113 direction, depending on the misorientation angle. This finding applies also to the branching of a single pore. The results can be understood if the valence for the dissolution reaction is approximately 2.6 in 100 and approximately 4 in the 113 direction, and if all other directions are not allowed for the growth of pores in Si.     

Chiral specificity in responses by the bark beetleDendroctonus valens to host kairomones

The attraction of the red turpentine beetle,Dendroctonus valens, to the resin volatiles of its host,Pinus ponderosa, is elicited by three chiral monoterpenes. In field assays response was greatest to (S)-(–)--pinene; 92% (S)-(–)--pinene found inP ponderosa resin was not attractive. However, 75% (R)-(+)--pinene, which occurs inPinus lambertiana, a sympatric host ofD. valens, was attractive. (S)-(–)--Pinene interrupted response to (R)-(+)--pinene. (S)-(+)-3-Carene from both hosts was attractive at the (R)-(+)--pinene level. Three sympatric coniferous nonhosts each have the same attractive monoterpenes but produce less resin. These studies demonstrate the importance of chirality of host compounds in the host finding behavior of this bark beetle.     

Synthesis and Redox Properties of a π-Conjugated Cyclobutadienecobalt Polymer Containing Ferrocenyl Groups

The reaction of CpCo(PPh₃)₂, in which Cp= ⁵-cyclopentadienyl, with a -conjugated diacetylene, FcCC–o-C₆H₄–CCFc, in which Fc=ferrocenyl, was found to give a cyclobutadienecobalt mononuclear complex, { ⁴-C₄Fc₂(o-FcC₆H₄)₂}CoCp (1), the crystal structure of which was determined by X-ray crystallography. In contrast, the reaction of CpCo(PPh₃)₂ with FcCC–p-C₆H₄–CCFc affords a cyclobutadienecobalt polymer, [p-C₆H₄( ⁴-C₄Fc₂)CoCp] _n (2). The monocobalt complex 1 shows reversible 1e^– and 3e^– redox waves at E ⁰=0.116 and 0.350 V vs Ag/Ag⁺, and the polymer complex 2 shows two chemically reversible redox waves at E ⁰=0.143 and 0.219 V for the oxidation of the ferrocenyl moieties in the cyclic voltammogram. Crystal data are as follows: (1, C₆₅H₄₉CoFe₄), triclinic, space group P\={1} (No. 2), a=13.547(4), b=16.197(4), c=11.763(4) Å, =106.79(2), =97.93(3), =97.12(3), V=2410(1) ų, Z=2.     

Pore Size Distribution and Chord Length Distribution of Porous VYCOR Glass (PVG)

A porous VYCOR-glass of porosity c 30% was analyzed by use of nitrogen adsorption (NA), mercury intrusion (MI) and small-angle scattering (SAS). The distribution density of the pore diameter was determined from the SAS experiment, based on the stereological information for a fixed order range L = 40 nm.A pore can be described by use of two random variables, which depend on each other: The pore diameter d and the chord length l. In a first step, an assumption free data evaluation method yields the second derivative of the SAS correlation function (r). Then, based on the intimate connection between (r) with random chord lengths, an interpretation of the first two mean peaks was performed. These peaks reflect the chord length distributions of pore and wall. The problem of the allocation of the peaks has been solved based on the information of the NA and MI experiments. The transformation of the distribution densities of the pore diameters V _M(d) (obtained by MI a experiment) and V _N(d) (obtained by a MI experiment) into chord length distribution densities A _M(l) and A _N(l) have allowed the clear interpretation of (r). It was possible to separate the chord distributions of the pores from those of the walls. The first (r) peak reflects the chord length distribution density (l) of the pores (first moment l¯ = 10.6 nm) and the second one that of the walls f(m) (first moment m¯ = 21 nm). It follows c 30%. The average mean chord length is d¯ _lm 15 nm. The second moment of (l) is 108 nm².Finally, from the separated function (l), the diameter distribution density of the pores V _SAS(d) has been obtained. V _SAS(d) was calculated, neither assuming a defined mathematical function type of the distribution nor a certain shape or dimension of the pore. The first and second moments of V _SAS(d) are 7 nm and 74 nm². From comparing the three distribution densities V _SAS(d), V _M(d) and V _N(d) it can be concluded that the assumption of cylindrical pores is fulfilled.While the chord length distribution density of the walls is a highly symmetrical function, which can be approximated by a Gauss term, the pores have an unsymmetrical chord distribution density with the PVG.     

Influence of source,rate, and method of applicating controlled release fertilizer on nutrient release and growth of ‘Savannah’ holly

An experiment was conducted to determine the effect of rate of fertilizer application and method of application on the rate of nutrient release and growth of Savannah holly (Ilex ×attenuata Ashe) using three controlled release fertilizers. The controlled release fertilizers used were Osmocote 17N—3P—9.9K, Sierrablen 17N—3P—8.3K, and High-N 24N—1.7P—5.8K, all 12 to 14 month formulations. The three fertilizers had different release rates as determined by leachate nitrate—N and electrical conductivity (EC) measurements. Topdressing of fertilizer had the greatest release rate at seven days after treatment compared to fertilizer incorporation which had the lowest EC readings at 120 days after treatment. Fertilizer source had no effect on the shoot growth of Savannah holly. Growth index and shoot dry weight of Savannah holly increased linearly as N rate increased from 0.9 to 2.1 kg N m^–3. A significant linear relationship (R² = 0.97, Nitrate—N = 409 (EC)) between nitrate—N and EC indicates that nitrate—N concentration can be estimated from EC readings when the pour-through method is used with multicoated controlled release fertilizers. The controlled release fertilizers used in this study provided adequate nutrient release rates for up to four months under outdoor nursery conditions during the months of June through October.     

High-Performance Directional Metallopolyamides. I. Synthesis and Thermal Analysis

High-performance polyamides containing the 4,4-disubstituted-2,2-bipyridyl moiety were synthesized by phosphorylation polycondensation from 2,2-bipyridyl-4,4-dicarboxylic acid and a series of primary aromatic diamines with triphenylphosphite and pyridine as the agents to facilitate condensation. Polyamides exhibiting improved solubility in organic solvents and strong acids, melting transitions at low temperatures, and good thermal properties were prepared by introducing bulking methyl and fluoro groups and flexible ether and propyl linkages and by using monomers with reduced symmetry. Solutions of the polyamides with rigid main chains (III, IV, V, VI, and VIII) showed birefringence (colorful spherulites) at concentrations of 5, 10, and 15% (w/v) polymer/solvent. The chelation of ruthenium(II) ions resulted in the preparation of directional metallopolyamide systems based on the geometrically favorable tris(2,2-bipyridyl)ruthenium(II) complex. The three-dimensional polyamides, which absorbed at a _max of 476 mm and emitted at a _max of 620 nm, exhibited a high thermal stability and improved solubility, making them suitable candidates for compressive strength studies and cyclic voltammetry studies as part of an effort to address the corrosion of graphite fiber-reinforced composites.     

Impact of Structural Factors on Unsteady Combustion Modes of Gasless Systems

Based on the twotemperature, twovelocity timedependent model of gasless combustion, taking into account structural transformations related to the force action of the gas filtering in the pores and vitrification and volume variation of the condensed phase during the chemical transformation, selfoscillatory combustion modes are studied. Structural transformations are shown to have a pronounced effect on the propagation pattern of combustion waves and can either stabilize or destabilize combustion. The major structural parameters appreciably affecting combustionwave stability are the initial porosity, particle size, and pressure.     

Chemistry and Defensive Efficacy of Secretion of Burrowing Bug (Sehirus cinctus cinctus)

Adult Sehirus cinctus cinctus emit a volatile secretion from their metathoracic scent glands when tactually stimulated. We identified the volatile components by gas chromatography, high-performance liquid chromatography, and mass spectrometry. The secretion of both sexes contained (1R)-(+)--pinene, (1S)-(–)--pinene, -myrcene, (R)-(+)-limonene, and -terpinolene. Two additional compounds were found in only female secretions: (E)-2-hexenyl acetate and (E)-2-octenal. We also tested the defensive capability of this insect by offering it to various predators. Anoles, starlings, and a killdeer rejected S. c. cinctus after an initial sampling. These findings suggest that the secretion plays a defensive role.     

Polyimides based on “multiring” flexible diamines

The five benzene rings-containing (hereafter for convenience, referred to as five-ringrd) diamines ad-bis[4-(4-aminophenoxy)phenyl]-1,4 (or 1,3)-diisopropylbenzene (p- or m-3) were prepared by a nucleophilic substitution of ,-bis(4-hydroxyphenyl)-1, 4 (or 1,3)-diisopropylbenzene (p- or m-1) with p-chloronitrobenzene in the presence of K₂CO₃ and then hydro-reduced. The polyimides were synthesized from diamine 3 and various aromatic dianhydrides via the two-stage procedure that include ring-opening polyaddition in DMAc to give poly(amic acid)s, followed by thermal conversion to polyimides. The poly(amic acid)s had inherent viscosities of 0.63–1.54 dL/g depending on the dianhydrides used. Almost all the poly(amic acid)s could be solution-cast and thermally converted into transparent, flexible, and tough polyimide films. These polyimides have glass transition temperatures in the range of 186–290°C and almost no weight loss up to 500°C in air or nitrogen atmosphere. The polyimide obtained from pyromellitic dianhydride and diamine m-3 showed two endothermic peaks of 270 and 300°C on the diagram of differential scanning calorimetry (DSC), and the other polyimides showed no endotherms on their DSC traces.     

Asymmetric structure analysis of active surface-sites by in situ polarized total-reflection fluorescence EXAFS

An in situ polarization-dependent total reflection fluorescence yield EXAFS system has been developed to analyze the asymmetric structures of catalytically active metal sites on single crystal surfaces. This technique separately reveals the bonding feature parallel and perpendicular to the support surface. The systems of Cu ion on -quartz(0001), Co oxide on -alumina(0001), and Pt₄ on -alumina(0001) were investigated as model surfaces of supported catalytic systems. The location of Cu sites on -quartz(0001), the epitaxial growth mode of Co₃O₄ on -alumina(0001), and the Pt raft structure with metal-support interaction in Pt₄ / -alumina(0001) were observed.     

Partial oxidation of methane to synthesis gas

Partial oxidation of methane to synthesis gas has been carried out over a number of transition metal catalysts under a range of conditions. It is found that the metals Ni, Ru, Rh, Pd, Ir and Pt, either supported on alumina or present in mixed metal oxide precursors, will bring the system to equilibrium. The yield of CO and H2 improves with increasing temperature in the range 650–1050 K, and decreases with increasing pressure between 1 and 20 atm. An excellent yield (92%) is obtained with a 421 N₂CH₄O₂ ratio at 1050 K and atmospheric pressure, with a space velocity of 4×10⁴ hour^–1.