Synthesis and electrochemical characterization of PEO-based polymer electrolytes with room temperature ionic liquids

New gel polymer electrolytes containing 1-butyl-4-methylpyridinium bis(trifluoromethanesulfonyl)imide (BMPyTFSI) ionic liquid are prepared by solution casting method. Thermal and electrochemical properties have been determined for these gel polymer electrolytes. The addition of BMPyTFSI to the P(EO)₂₀LiTFSI electrolyte results in an increase of the ionic conductivity, and at high BMPyTFSI concentration (BMPy⁺/Li⁺ = 1.0), the ionic conductivity reaches the value of 6.9 × 10⁻⁴ S/cm at 40 °C. The lithium ion transference numbers obtained from polarization measurements at 40 °C were found to decrease as the amount of BMPyTFSI increased. However, the lithium ionic conductivity increased with the content of BMPyTFSI. The electrochemical stability and interfacial stability for these gel polymer electrolytes were significantly improved due to the incorporation of BMPyTFSI.     

Characterization of poly(vinylidenefluoride-co-hexafluoropropylene)-based polymer electrolyte filled with TiO2 nanoparticles

Nanoscale TiO₂ particle filled poly(vinylidenefluoride-co-hexafluoropropylene) film is characterized by investigating some properties such as surface morphology, thermal and crystalline properties, swelling behavior after absorbing electrolyte solution, chemical and electrochemical stabilities, ionic conductivity, and compatibility with lithium electrode. Decent self-supporting polymer electrolyte film can be obtained at the range of <50 wt% TiO₂. Different optimal TiO₂ contents showing maximum liquid uptake may exist by adopting other electrolyte solution. Room temperature ionic conductivity of the polymer electrolyte placed surely on the region of >10⁻³ S/cm, and thus the film is very applicable to rechargeable lithium batteries. An emphasis is also be paid on that much lower interfacial resistance between the polymer electrolyte and lithium metal electrode can be obtained by the solid-solvent role of nanoscale TiO₂ filler.     

Rechargeable lithium/sulfur battery with suitable mixed liquid electrolytes

The suitability of some single/binary liquid electrolytes and polymer electrolytes with a 1 M solution of LiCF₃SO₃ was evaluated for discharge capacity and cycle performance of Li/S cells at room temperature. The liquid electrolyte content in the cell was found to have a profound influence on the first discharge capacity and cycle property. The optimum, stable cycle performance at about 450 mAh g⁻¹ was obtained with a medium content (12 μl) of electrolyte. Comparison of cycle performance of cells with tetra(ethylene glycol)dimethyl ether (TEGDME), TEGDME/1,3-dioxolane (DIOX) (1:1, v/v) and 1,2-dimethoxyethane (DME)/di(ethylene glycol)dimethyl ether (DEGDME) (1:1, v/v) showed better results with the mixed electrolytes based on TEGDME. The addition of 5 vol.% of toluene in TEGDME had a remarkable effect of increasing the initial discharge capacity from 386 to 736 mAh g⁻¹ (by >90%) and stabilizing the cycle properties, attributed to the reduced lithium metal interfacial resistance obtained for the system. Polymer electrolyte based on microporous poly(vinylidene fluoride) (PVdF) membrane and TEGDME/DIOX was evaluated for ionic conductivity at room temperature, lithium metal interfacial resistance and cycle performance in room-temperature Li/S cells. A comparison of the liquid electrolyte and polymer electrolyte showed a better performance of the former.     

Nano-size LiAlO2 ceramic filler incorporated porous PVDF-co-HFP electrolyte for lithium-ion battery applications

The optimized composition of PVdF-co-HFP-LiAlO₂ based micro-porous nano-composite polymer electrolyte membranes (MPNCPEMs) was prepared with a preferential polymer dissolution process. Nitrogen adsorption isotherms and SEM micrographs showed that the enhanced ionic conductivity of polymer electrolyte was due to increase in pore-size, surface area and pore density, results an increase in the electrolyte uptake. The ac-impedance spectroscopy showed that the room temperature ionic conductivity of PVdF-co-HFP-LiAlO₂ based polymer electrolyte membranes increased with the removal of PVA content and attained the maximum ionic conductivity of 8.12 × 10⁻³ S cm⁻¹. The prepared MPNCPEM of high ionic conductivity was subjected into LSV study. Finally, the electrode/electrolyte interfacial resistance was evaluated by monitoring the impedance response at different time intervals.     

Characterisation of [(1−x)PMMA-xPVdF] polymer blend electrolyte with Li ion

The possible use of polymeric materials in thin-film solid electrolytes for battery systems, fuel cells, sensors and other electrochemical applications has stimulated worldwide interest in metal salt solvating macromolecules. Polymer electrolyte membranes comprising of poly(methyl methacrylate) (PMMA), poly(vinylidene fluoride) (PVdF) and lithium perchlorate are prepared using a solvent casting technique. Polymer blends have been characterised by FTIR and XRD studies to determine the molecular environment for the conducting ions. The role of interaction between polymer hosts on conductivity is discussed using the results of ac impedance studies. The ionic conductivity is presented as a function of temperature and PVdF content. Room temperature conductivity of 3.14×10⁻⁵ S cm⁻¹ has been obtained for the [0.25PMMA/0.75PVdF]-LiClO₄ polymer complex.     

A novel electrospun TPU/PVdF porous fibrous polymer electrolyte for lithium ion batteries

Novel blend-based gel polymer electrolyte (GPE) films of thermoplastic polyurethane (TPU) and poly(vinylidene fluoride) (PVdF) (denoted as TPU/PVdF) have been prepared by electrospinning. The electrospun thermoplastic polyurethane-co-poly (vinylidene fluoride) membranes were activated with a 1M solution of LiClO₄ in EC/PC and showed a high ionic conductivity about 1.6 mS cm⁻¹ at room temperature. The electrochemical stability is at 5.0 V versus Li⁺/Li, making them suitable for practical applications in lithium cells. Cycling tests of Li/GPE/LiFePO4 cells showed the suitability of the electrospun membranes made of TPU/PVdF (80/20, w/w) for applications in lithium rechargeable batteries. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and electrochemical properties of lithium methacrylate-based self-doped gel polymer electrolytes

In this study, a strategy for synthesizing lithium methacrylate (LiMA)-based self-doped gel polymer electrolytes was described and the electrochemical properties were investigated by impedance spectroscopy and linear sweep voltammetry. LiMA was found to dissolve in ethylene carbonate (EC)/diethyl carbonate (DEC) (3/7, v/v) solvent after complexing with boron trifluoride (BF₃). This was achieved by lowering the ionic interactions between the methacrylic anion and lithium cation. As a result, gel polymer electrolytes consisting of BF₃-LiMA complexes and poly(ethylene glycol) diacrylate were successfully synthesized by radical polymerization in an EC/DEC liquid electrolyte. The FT-IR and AC impedance measurements revealed that the incorporation of BF₃ into the gel polymer electrolytes increases the solubility of LiMA and the ionic conductivity by enhancing the ion disassociations. Despite the self-doped nature of the LiMA salt, an ionic conductivity value of 3.0 × 10⁻⁵ S cm⁻¹ was achieved at 25 °C in the gel polymer electrolyte with 49 wt% of polymer content. Furthermore, linear sweep voltammetry measurements showed that the electrochemical stability of the gel polymer electrolyte was around 5.0 V at 25 °C.     

A novel polymer electrolyte based on PMAML/PVDF-HFP blend

A gel polymer electrolyte based on the blend of poly(methyl methacrylate-co-acrylonitrile-co-lithium methacrylate) (PMAML) and poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) was prepared and characterized. The synthesized PMAML were characterized by FTIR and NMR, respectively, and the surface morphology of the PMAML and PVDF-HFP blend membrane was also observed by scanning electron microscope (SEM). The electrochemical properties of composite electrolyte membranes were studied. The ionic conductivity of the polymer electrolyte composed of 75 wt.% 1 M LiBF₄ in ethylene carbonate (EC) and dimethyl carbonate (DMC) (EC:DMC=1:1 by weight) was about 2.6×10⁻³ S cm⁻¹ at ambient temperature. The electrochemical window of the polymer electrolyte was about 4.6 V determined from the linear sweep voltammetry plot. The lithium ion polymer batteries were assembled by sandwiching gel polymer electrolyte between LiCoO₂ cathode and mesophase carbon fibre (MPCF) anode. Charge-discharge test results display that lithium ion batteries with these gel polymer electrolytes have good electrochemical performance.     

Physical and electrochemical characterizations of poly(vinylidene fluoride‐co‐hexafluoropropylene)/SiO2‐based polymer electrolytes prepared by the phase‐inversion technique

Highly porous poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVdF–HFP)‐based polymer membranes filled with fumed silica (SiO₂) were prepared by a phase‐inversion technique, and films were also cast by a conventional casting method for comparison. N‐Methyl‐2‐pyrrolidone as a solvent was used to dissolve the polymer and to make the slurry with SiO₂. Phase inversion occurred just after the impregnation of the applied slurry on a glass plate into flowing water as a nonsolvent, and then a highly porous structure developed by mutual diffusion between the solvent and nonsolvent components. The PVdF–HFP/SiO₂ cast films and phase‐inversion membranes were then characterized by an examination of the morphology, thermal and crystalline properties, absorption ability of an electrolyte solution, ionic conductivity, electrochemical stability, and interfacial resistance with a lithium electrode. LiPF₆ (1M) dissolved in a liquid mixture of ethylene carbonate and dimethyl carbonate (1:1 w/w) was used as the electrolyte solution. Through these characterizations, the phase‐inversion polymer electrolytes were proved to be superior to the cast‐film electrolytes for application to rechargeable lithium batteries. In particular, phase‐inversion PVdF–HFP/SiO₂ (30–40 wt %) electrolytes could be recommended to have optimum properties for the application. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 140–148, 2006     

Crystallinity, morphology, mechanical properties and conductivity study of in situ formed PVdF/LiClO4/TiO2 nanocomposite polymer electrolytes

Nanocomposite polymer electrolytes composed of poly(vinylidene fluoride) (PVdF), lithium perchlorate (LiClO₄) and TiO₂ nanoparticles were prepared by a solution-cast method. The nanosized ceramic filler, TiO₂, was synthesized in situ by a sol-gel process. Differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD) analysis revealed that the crystalline phase and crystallinity were slightly decreased with the addition of TiO₂ to the PVdF/LiClO₄ system. Scanning electron microscopy (SEM) micrographs showed that the PVdF/LiClO₄/TiO₂ solid polymer electrolyte (SPE) membranes had a porous structure to a certain extent, and that the pore size decreased with increasing TiO₂ content. The overfull nanoparticles tended to aggregate on the surface and inside the pores at TiO₂ content above 15 wt.% so that the porosity decreased. Regarding mechanical properties, the strength of the PVdF/LiClO₄/TiO₂ electrolytes decreased after the uptake of EC/PC solution. In contrast to the conductive behavior of wet PVdF/LiClO₄/TiO₂ membranes relative to the uptake of EC/PC solution, the conductive mechanism of the solid membranes, after the lithium ion of LiClO₄ had already been installed in the PVdF solid polymer network, was mainly influenced by the TiO₂ nanoparticles. At a TiO₂ content of 10 wt.%, the solid and wet PVdF/LiClO₄/TiO₂ systems had the maximum conductivity values of 7.1 × 10⁻⁴ and 1.8 × 10⁻³ S/cm, respectively.     

The conductivity and characterization of the plasticized polymer electrolyte based on the P(AN-co-GMA-IDA) copolymer with chelating group (II): The effect of free ion in the plasticized polymer electrolyte

A new gel-type polymer electrolyte (GPE) was made by the copolymerizing acrylonitrile (AN) and (2-methylacrylic acid 3-(bis-carboxymethylamino)-2-hydroxy-propyl ester) (GMA-IDA). The copolymer mixed with a plasticizer—propylene carbonate (PC) and lithium salt to form GPE. The lithium salts are LiCF₃SO₃, LiBr and LiClO₄. FT-IR spectra show that the lithium ion in the LiClO₄ system has the strongest interaction with the group based on the plasticized polymer. FT-IR spectra also indicate that CF₃SO₃⁻ prefers producing anion-cation association. Moreover, the ¹³C solid state NMR spectra for the carbons attached to the PC of GPE exhibited different level of chemical shift (158.5 ppm) when the different lithium salts were added to the electrolyte. The results of differential scanning calorimeter (DSC) also indicate that the LiClO₄ system has more free lithium ions; therefore, it has the maximum conductivity. In this study, the highest conductivity 2.98 × 10⁻³ S cm⁻¹ exists in AG2/PC = 20/80 wt.% system which contain 3 mmole (g-polymer)⁻¹ LiClO₄. Additionally, the polymer electrolytes, which contain GMA-IDA have better interfacial resistance stability with lithium electrode.     

Effect of surface modified porous inorganic-organic hybrid polyphosphazene nanotubes on the properties of polyethylene oxide based solid polymer electrolytes

2-(2-methyloxyethoxy)ethanol modified poly (cyclotriphosphazene-co-4,4′-sufonyldiphenol) (PZS) nanotubes were synthesized and solid composite polymer electrolytes based on the surface modified polyphosphazene nanotubes added to PEO/LiClO₄ model system were prepared. Differential Scanning Calorimetry (DSC) and Scanning Electron Microscopy (SEM) were used to investigate the characteristics of the composite polymer electrolytes (CPE). The ionic conductivity, lithium ion transference number and electrochemical stability window can be enhanced after the addition of surface modified PZS nanotubes. The electrochemical investigation shows that the solid composite polymer electrolytes incorporated with PZS nanotubes have higher ionic conductivity and lithium ion transference number than the filler SiO₂. Maximum ionic conductivity values of 4.95 × 10⁻⁵ S cm⁻¹ at ambient temperature and 1.64 × 10⁻³ S cm⁻¹ at 80 °C with 10 wt % content of surface modified PZS nanotubes were obtained and the lithium ion transference number was 0.41. The good chemical properties of the solid state composite polymer electrolytes suggested that the inorganic-organic hybrid polyphosphazene nanotubes had a promising use as fillers in solid composite polymer electrolytes and the PEO₁₀-LiClO₄-PZS nanotubes solid composite polymer electrolyte can be used as a candidate material for lithium polymer batteries.     

Effect of Al2O3 nanoparticles on the electrochemical characteristics of P(VDF-HFP)-based polymer electrolyte

Alumina (Al₂O₃) nanoparticles have been used as fillers in the preparation of poly(vinylidenefluoride-co-hexafluorpropylene) (P(VDF-HFP))-based porous polymer electrolyte. The degree of crystallization of polymer film filled with Al₂O₃ nanoparticles decreases with increase of the mass fraction of Al₂O₃ nanoparticles and the amorphous phases of polymer film expand accordingly. The Al₂O₃ nanoparticles play the role of solid plasticizer for polymer matrix. Nevertheless that excessive Al₂O₃ nanoparticles existing in polymer matrix leads to micro-phase separation between polymer matrix and fillers. As a result, both ionic conductivity and lithium ions transference number reduces whereas the activation energy for ions transport increases. When the polymer film is filled with 10% of the mass fraction of Al₂O₃ nanoparticles, polymer electrolyte possesses the ionic conductivity up to 1.95 × 10⁻³ S cm⁻¹ and the lithium ions transference number to 0.73 while the activation energy for ions transport of them falls to 5.6 kJ mol⁻¹. Effect of Al₂O₃ on the electrochemical properties of polymer electrolyte has been investigated in this paper. Analysis of FTIR spectra shows that there is the interaction between Al₂O₃ nanoparticles and polymer chains.     

Increasing ionic conductivity and mechanical strength of a plastic electrolyte by inclusion of a polymer

In this contribution we present a soft matter solid electrolyte which was obtained by inclusion of a polymer (polyacrylonitrile, PAN) in LiClO₄/LiTFSI-succinonitrile (SN), a semi-solid organic plastic electrolyte. Addition of the polymer resulted in considerable enhancement in ionic conductivity as well as mechanical strength of LiX-SN (X = ClO₄, TFSI) plastic electrolyte. Ionic conductivity of 92.5%-[1 M LiClO₄-SN]:7.5%-PAN (PAN amount as per SN weight) composite at 25 °C recorded a remarkably high value of 7 × 10⁻³ Ω⁻¹ cm⁻¹, higher by few tens of order in magnitude compared to 1 M LiClO₄-SN. Composite conductivity at sub-ambient temperature is also quite high. At −20 °C, the ionic conductivity of (100 − x)%-[1 M LiClO₄-SN]:x%-PAN composites are in the range 3 × 10⁻⁵-4.5 × 10⁻⁴ Ω⁻¹ cm⁻¹, approximately one to two orders of magnitude higher with respect to 1 M LiClO₄-SN electrolyte conductivity. Addition of PAN resulted in an increase of the Young's modulus (Y) from Y → 0 for LiClO₄-SN to a maximum of 0.4 MPa for the composites. Microstructural studies based on X-ray diffraction, differential scanning calorimetry and Fourier transform infrared spectroscopy suggest that enhancement in composite ionic conductivity is a combined effect of decrease in crystallinity and enhanced trans conformer concentration.     

Composite polymer electrolyte incorporating WO3 nanofillers with enhanced performance for dendrite-free solid-state lithium battery

All solid-state lithium batteries (ASS-LBs) with polymer-based solid electrolytes are a prospective contender for the next-generation batteries because of their high energy density, flexibility, and safety. Among all-polymer electrolytes, PEO-based solid polymer electrolytes received huge consideration as they can dissolve various Li salts. However, the development of an ideal PEO-based solid polymer electrolyte is hindered by its insufficient tensile strength and lower ionic conductivity due to its semi-crystalline and soft chain structure. In order to lower the crystallization and improve the performance of PEO-based solid polymer electrolyte, tungsten trioxide (WO₃) nanofillers were introduced into PEO matrix. Herein, a PEO₂₀/LiTFSI/x-WO₃ (PELI-xW) (x = 0%, 2.5%, 5%, 10%) solid composite polymer electrolyte was prepared by the tape casting method. The solid composite polymer electrolyte containing 5 wt% WO₃ nanofillers achieved the highest ionic conductivity of 7.4 × 10^-4 S cm^-1 at 60 °C. It also confirms a higher Li-ion transference number of 0.42, good electrochemical stability of 4.3V, and higher tensile strength than a PEO/LiTFSI (PELI-0W) fillers-free electrolyte. Meanwhile, the LiFePO₄│PELI-xW│Li ASS-LBs demonstrated high performance and cyclability. Based on these findings, it can be considered a feasible strategy for the construction of efficient and flexible PEO-based solid polymer electrolytes for next-generation solid-state batteries.     

Compatibility of quaternary ammonium-based ionic liquid electrolytes with electrodes in lithium ion batteries

Electrochemical intercalation/deintercalation behavior of lithium into/from electrodes of lithium ion batteries was comparatively investigated in 1 mol/L LiClO₄ ethylene carbonate-diethyl carbonate (EC-DEC) electrolyte and a quaternary ammonium-based ionic liquid electrolyte. The natural graphite anode exhibited satisfactory electrochemical performance in the ionic liquid electrolyte containing 20 vol.% chloroethylenene carbonate (Cl-EC). This is attributed to the mild reduction of solvated Cl-EC molecules at the graphite/ionic electrolyte interface resulting in the formation of a thin and homogenous SEI on the graphite surface. However, rate capability of the graphite anode is poor due to the higher interfacial resistance than that obtained in 1 mol/L LiClO₄/EC-DEC organic electrolyte. Spinel LiMn₂O₄ cathode was also electrochemically cycled in the ionic electrolyte showing satisfactory capacity and reversibility. The ionic electrolyte system is thus promising for 4 V lithium ion batteries based on the concept of “greenness and safety”.     

Review on composite polymer electrolytes for lithium batteries

This paper reviews the state of the art of composite polymer electrolytes (CPE) in view of their electrochemical and physical properties for the applications in lithium batteries. This review mainly encompasses on composite polymer electrolyte hosts namely poly(ethylene oxide) (PEO), poly(acrylonitrile) (PAN), poly(methyl methacrylate) (PMMA) and poly(vinylidene fluoride) (PVdF) studied so far. Also the ionic conductivity, transference number, compatibility and the cycling behavior of poly(vinylidene fluoride-hexafluoro propylene) (PVdF-HFP)-[AlO(OH)]_n-LiPF₆/LiClO₄ composite electrolytes have been studied and the results are discussed.     

Characteristics of PVdF‐HFP/TiO2 Composite Electrolytes Prepared by a Phase Inversion Technique Using Dimethyl Acetamide Solvent and Water Non‐Solvent

Summary: Highly porous poly[(vinylidene fluoride)‐co‐hexafluoropropylene] (PVdF‐HFP)/TiO₂ membranes were prepared by a phase inversion technique, using dimethyl acetamide (DMAc) as a solvent and water as a non‐solvent. Their physical and electrochemical properties were then characterized in terms of thermal and crystalline behavior, as well as ionic conductivity after absorbing an electrolyte solution of 1 M LiPF₆ dissolved in an equal weight mixture of ethylene carbonate (EC) and dimethyl carbonate (DMC). For comparison, cast films and their electrolytes were also made by a conventional casting method without using the water non‐solvent. In contrast to the case of using N‐methyl‐2‐pyrrolidone (NMP) as a solvent, the PVdF‐HFP/TiO₂ composite electrolytes, obtained using DMAc, exhibited superior properties of electrochemical stability and interfacial resistance with a lithium electrode but had lower ionic conductivities. It was also demonstrated that the phase inversion membrane was more effective than the cast film as the polymer electrolyte of a lithium rechargeable battery. As a result, a phase inversion membrane with 50 wt.‐% TiO₂ was demonstrated to be the optimal choice for application in a lithium rechargeable battery.

Time evolutions of interfacial resistance between polymer electrolyte and lithium electrodes.     

Effect of zwitterionic salt on the electrochemical properties of a solid polymer electrolyte with high temperature stability for lithium ion batteries

In this study, we prepare a kind of solid polymer electrolyte (SPE) based on N-ethyl-N′-methyl imidazolium tetrafluoroborate (EMIBF₄), LiBF₄ and poly(vinylidene difluoride-co-hexafluoropropylene) [P(VdF-HFP)] copolymer. The resultant SPE displays high thermal stability above 300 °C and high room temperature ionic conductivity near to 10⁻³ S cm⁻¹. Its electrochemical properties are improved with incorporation of a zwitterionic salt 1-(1-methyl-3-imidazolium)propane-3-sulfonate (MIm3S). When the SPE contains 1.0 wt% of the MIm3S, it has a high ionic conductivity of 1.57 × 10⁻³ S cm⁻¹ at room temperature, the maximum lithium ions transference number of 0.36 and the minimum apparent activation energy for ions transportation of 30.9 kJ mol⁻¹. The charge-discharge performance of a Li₄Ti₅O₁₂/SPE/LiCoO₂ cell indicates the potential application of the as-prepared SPE in lithium ion batteries.     

Ternary polymer electrolytes with 1-methylimidazole based ionic liquids and aprotic solvents

New polymer gel electrolytes containing ionic liquids were developed for modern chemical power sources—supercapacitors and lithium-ion batteries. Ternary systems polymer-ionic liquid-aprotic solvent as well as materials containing also lithium salts (LiClO₄ or LiPF₆) were prepared by direct, thermally initiated polymerisation. Poly(2-ethoxyethyl methacrylate) PEOEMA was combined with various ionic liquids based on 1-methylimidazole. Only 1-butyl-3-methylimidazolium hexafluorophosphate BMIPF₆ formed a homogenous and slightly translucent polymer electrolyte, where aprotic solvents—propylene carbonate and ethylene carbonates were used as plasticisers. Materials were studied using the electrochemical and thermogravimetric methods and exhibit high ionic conductivity up to 0.94 mS cm⁻¹ at 25 °C together with high electrochemical stability: the accessible potential window on the glassy carbon was found ca. 4.3 V. Prepared non-volatile materials are long-term and thermally stable up to 150 °C.