首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 109 毫秒
1.
水锤对消防系统有很大影响,分别计算出流量区间上的系统工作压力、泄压阀压力以及水锤压力,分析它们之间的关系,可以得知,在流量区间上,水锤压力是一个定值,而系统工作压力和泄压阀压力会随着设计工作压力的变化而变化,因此水锤对系统的影响大小与楼层的高低有很大关系。由于系统正常运行时不会出现超压状态,泄压阀此时是不会打开的,消除水锤要用水锤消除器或防水锤专用止回阀等专用附件。  相似文献   

2.
通过对各标准、规范、技术规程中有关管材"压力"条文的探讨,指出了其中所存在的问题,建议在制定标准、规范、技术规程时应注意术语应用的通用性和准确性.  相似文献   

3.
针对水电站安全运行要求,选取合适的油气比和紧急停机压力对油压装置压力罐的容积进行准确的计算分析,以选取合理的压力罐容积。  相似文献   

4.
本电站引水系统压力钢管偏水,引起流速过大,造成出力不足以及要采取调压阀方案,本文对此作一扼要分析及提出几点建议,供有关领导参考。  相似文献   

5.
2004年10月,德国克拉公司将在德国杜塞尔多夫国际塑胶展会上推出大口径塑料压力管道生产技术和设备。这是在塑料压力管道领域里的新技术,填补了世界大口径压力管的空白。使用克拉塑料大口径压力管道生产线可以制造直径为1 000-4 000 mm的管道系统(简称KPPS),工作压力12 kg。和传统的钢管、PC-  相似文献   

6.
介绍了万家寨引黄工程地面泵站出水压力平洞和竖井的工程主要设计概况、工程主要施工情况、混凝土质量全面复测情况,阐述了混凝土裂缝与渗漏原因分析,最后对缺陷处理措施进行了探讨。  相似文献   

7.
8.
气泡水位计概论   总被引:1,自引:0,他引:1  
气泡水位计是压力式水位计的一种,它也是由早期气囊感压式压力水位计逐步发展演变而来。当今的气泡水位计随着计算机和电子技术的发展,已完全进入可靠实用阶段。它主要用于江河、湖泊、水库及其它水密度比较稳定的天然水体中,特别是那些滩宽淤积河湖地区,以及因其它地形条件限制,不能修建水位测井的地区。虽然它的价格比较贵,对操作使用者技术水平要求高,但由于它与被测水  相似文献   

9.
甄华铎 《小水电》1997,(1):22-23
广东省台山县大隆洞电站是坝后式电站,原有1台2000kW进口机组,设计水头20m,额定流量12m~3/s,为转桨式水轮机。为了充分利用洪水期水能,于1980年在原厂房左岸扩建2台800kW机组,设计水头12.9m,额定流量8m~3/s,水轮机型号ZD661-LH-120。本文就其电站存在的问题提出如下看  相似文献   

10.
在岩缝中脉动压力传播机理探讨   总被引:19,自引:5,他引:14  
刘沛清  冬俊瑞 《水利学报》1994,(12):31-36,54
高坝下游挑跌水流在基岩缝隙内引起较强的压力动是造成基岩破坏的重要因素,本文根据脉动压力波的瞬变特征,利用瞬变流模型,论述了压力波在缝隙中的传播特性和瞬时上举力的成因,并提出计算可能最大上举力的方法。  相似文献   

11.
小浪底地下厂房围岩稳定计算地质模型的研究   总被引:3,自引:0,他引:3  
根据工程勘探资料,在分析小浪底枢纽地下厂房区主要结构面的分布规律及其特征的基础上,建立了几何传真概化地质模型,并采用不连续介质有限元离散化计算模型,模拟计算地下厂房围岩的应力应变。计算结果表明,所建立的概化地质模型符合实际地质状况,计算的应力分布与实测的变形特征相吻合,这与目前按常用的其它模型及连续介质计算的结果有明显不同。  相似文献   

12.
根据哈尔滨水文水资源勘测总站实测水下地图及水文资料,针对桥梁上、下游浅滩变化,分析桥梁对水流的影响。  相似文献   

13.
Conclusions  
1.  The experience of design works on the hydropower equipment of a hydrostation as large of a large number of suppliers requires a technical coordinator of the works with strict obligations on coordinating the designs of equipment with this coordinator before sending to the customer.
2.  At the stage of preparing the tender documents for complete delivery of hydrostation equipment it is necessary to enlist a design organization for a general assessment of the layout of equipment given in the tender drawings, for preparing alternative variants of the layout, and simplifying the process of final coordination of changes in the contract specifications in the case of winning the tender.
Translated from Gidrotekhnicheskoe Stroitel’stvo, No. 3, pp. 52–54, March, 1998.  相似文献   

14.
Conclusions Additional detailed investigations of the foundation of the Khudoni arch dam performed at the detail design stage made it possible to refine the engineering-geological structure of the rock mass in the foundation of the structure, to evaluate its stress state, and to determine the variability of the physical and mechanical properties of the rock under the effect of natural and technogenic factors. These investigations showed that the structure of the investigated mass is characterized by a greater complexity than was assumed at the contract design stage, and the relatively high characteristics of the physical and mechanical properties of the rock in the interior parts of the mass in many respects are due to the effect of natural (tectonic and gravitational) stresses. With considerations of the results presented, it is necessary to maximally preserve the natural state of the interior parts of the mass when correcting the working drawings and selecting the technology of construction works.Translated from Gidrotekhnicheskoe Stroitel'stvo, No. 2, pp. 44–49, February, 1990.  相似文献   

15.
Conclusion The results obtained on estimating the reliability of the Khudoni arch dam on the basis of the strength condition under an unusual load combination indicates on the whole the ability of the structure to withstand strong earthquakes (intensity 7 and 8) without noticeable trouble-free operation of the structure.A decrease of the values of the reliability function at certain points of the dam (at levelsy=550 m andy=680 m of the downstream face and at levely=660 m of the upstream face) indicate the need to take local structural measures (for example, local reinforcement) to increase the strength of the sections and eliminate dangerous zones in the body of the dam.Translated from Gidrotekhnicheskoe Stroitel'stvo, No. 12, pp. 49–52, December, 1988.  相似文献   

16.
稳定河床水位流量关系单值化原理   总被引:2,自引:0,他引:2  
采用数理计算方法建立流量与综合落差、稳定流流量计算公式,从而使受洪水涨落和变动回水影响的非单元值的水位流量关系单值化。为精减测次、简化外业洲验,水文预报、水文及整编工作电算化提供了新的分析手段。  相似文献   

17.
沟后水库溃坝原因初步分析   总被引:1,自引:0,他引:1  
刘杰 《人民黄河》1994,17(7):28-32
沟后水库总库容330万m^3,大坝为钢筋混凝土面板砂砾石坝,坝高71m。1993年8月27日晚溃坝。初步分析溃坝原因是:渗流沿坝体上部施工层面逸出造成管涌破坏,并冲刷坝坡引起坝顶局部滑动,形成初期溃口,然后库水由口门大量下泄,进一步冲刷坝体,最终溃坝,设计时采用的控制砂砾石最大粒径的办法不可能起到控制砂砾石渗透性的作用。混凝土面砂砾石坝渗流控制的成功经验是在坝体中专门设置排水体。  相似文献   

18.
官地水电站右岸导流洞进口渐变段50m断面由方形渐变到标准城门洞形,最大开挖跨度25.6m,高度25.3m,呈弱风化状态,为Ⅳ类玄武岩。在施工过程中该段经历两次塌方,分别两次对塌方段进行相应支护处理。根据隧洞结构和地质资料建立三维有限元数值计算模型,对塌方段各工况进行分析,证明了塌方支护处理的合理性和安全性。  相似文献   

19.
江都三站是南水北调东线工程首级提水泵站之一,为适应大流量,长时间调水运行的需要,对主水泵中位置特殊、作用重要、直接影响机组运行可靠性、连续性的水导轴承装置提出了更高的要求。现结合江都三站主水泵运行环境和机组台数多的特点,提出了水导轴承装置的基本要求,阐述了目前常见的水导轴承运用的情况,并进行了比较分析。重点对水润滑弹性金属塑料水导轴承在江都三站机组环境下运行的可行性进行了分析,有针对性的提出了预防措施,经分析证明,该轴承能够适应江都三站特殊环境的要求,方案经济、可行。  相似文献   

20.
官地水电站右岸导流洞进口渐变段50m断面由方形渐变到标准城门洞形,最大开挖跨度25.6m,高度25.3m,呈弱风化状态,为Ⅳ类玄武岩。在施工过程中该段经历两次塌方,分别两次对塌方段进行相应支护处理。根据隧洞结构和地质资料建立三维有限元数值计算模型,对塌方段各工况进行分析,证明了塌方支护处理的合理性和安全性。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号