Structural insights in Dy3+‐doped β‐Tricalcium phosphate and its multimodal imaging characteristics

A series of Dysprosium (Dy³⁺) doped β‐Tricalcium phosphate [β‐TCP, β‐Ca₃(PO₄)₂] were developed for applications in magnetic resonance imaging (MRI) and computed tomography (CT). Characterization studies confirmed the Dy³⁺ occupancy at Ca²⁺(1), Ca²⁺(2), and Ca²⁺(3) lattice sites of β‐Ca₃(PO₄)₂ and its substitution limit was determined as 4.35 mol%. The transitions from the ⁶H_15/2 ground state to various excited energy levels is validated by the characteristic absorption peaks of Dy³⁺. Luminescence studies inferred two intense bands at 480 and 572 nm due to ⁴F_9/2→⁶H_15/2 (blue) and ⁴F_9/2→⁶H_13/2 (yellow) transitions of Dy³⁺. The paramagnetic and nontoxic behavior of Dy³⁺‐doped β‐Ca₃(PO₄)₂ were confirmed from magnetic and MTT tests, respectively. Dy³⁺ in the host induces a high X‐ray absorption ability for X‐ray computed tomography (CT) and showed efficient contrast T₂‐enhancing modality. Thus the proposed system could be used as a promising probe for multimodality with optical imaging, computed tomography and magnetic resonance imaging.     

Preparation,luminescence properties and energy transfer of Ca9Y(PO4)7: Eu2+‐Tb3+ phosphors

Tb³⁺‐doped and Eu²⁺, Tb³⁺ co‐doped Ca₉Y(PO₄)₇ phosphors were synthesized by conventional solid‐state method. Additionally, the luminescence properties, decay behavior and energy transfer mechanism have already been investigated in detail. The green emission intensity of Tb³⁺ ions under NUV excitation is weak due to its spin‐forbidden f‐f transition. While Eu²⁺ can efficiently absorb NUV light and yield broad blue emission, most of which can be absorbed by Tb³⁺ ions. Thus, the emission color can be easily tuned from cyan to green through the energy transfer of Eu²⁺→Tb³⁺ in Ca₉Y(PO₄)₇:Eu²⁺,Tb³⁺ phosphor. In this work, the phenomenon of cross‐relaxation between ⁵D₃ and ⁵D₄ are also mentioned. The energy transfer is confirmed to be resulted from a quadrupole‐quadrupole mechanism.     

Effect of A+ (A = Li,Na and K) co-doping on enhancing the luminescence of Ca5(PO4)2SiO4:Eu3+ red-emitting phosphors as charge compensator

A series of Ca_5-x(PO₄)₂SiO₄:xEu³⁺ red-emitting phosphors were synthesized through solid-state reaction, and alkali metal ions A⁺ (A = Li, Na and K) were co-doped in Ca₅(PO₄)₂SiO₄:Eu³⁺ to improve its luminescence property. The impacts of synthesis temperature, luminescence center Eu³⁺ concentration and charge compensator A⁺ on the structure and luminescence property of samples were studied in detail. X-ray diffraction results indicated that prepared Ca₅(PO₄)₂SiO₄:Eu³⁺, A⁺ had a standard Ca₅(PO₄)₂SiO₄ structure with space group P6₃/m. Under the excitation of 392 nm, Ca₅(PO₄)₂SiO₄:Eu³⁺ phosphors showed a red emission consisting of several emission peaks at 593 nm, 616 nm and 656 nm, relevant to ⁵D₀→⁷F₁, ⁵D₀→⁷F₂ and ⁵D₀→⁷F₄ electron transitions of Eu³⁺ ions, respectively. Luminescence intensity and lifetime of Ca₅(PO₄)₂SiO₄:Eu³⁺ can be significantly enhanced through co-doping alkali metal ion A⁺, which play an important role as charge compensator. The results suggest that Ca₅(PO₄)₂SiO₄:Eu³⁺, A⁺ red phosphors with excellent luminescence property are expectantly served as red component for white light-emitting diodes excited by near-ultraviolet.     

A novel dazzling Eu3+‐doped whitlockite‐type phosphate red‐emitting phosphor for white light‐emitting diodes

A series of novel red‐emitting Ca₈ZnLa_1?xEu_x(PO₄)₇ phosphors were successfully synthesized using the high‐temperature solid‐state reaction method. The crystal structure, photoluminescence spectra, thermal stability, and quantum efficiency of the phosphors were investigated as a function of Eu³⁺ concentration. Detailed analysis of their structural properties revealed that all the phosphors could be assigned as whitlockite‐type β‐Ca₃(PO₄)₂ structures. Both the PL emission spectra and decay curves suggest that emission intensity is largely dependent on Eu³⁺ concentration, with no quenching as the Eu³⁺ concentration approaches 100%. A dominant red emission band centered at 611 nm indicates that Eu³⁺ occupies a low symmetry sites within the Ca₈ZnLa(PO₄)₇ host lattice, which was confirm by Judd‐Ofelt theory. Ca₈ZnLa_1?xEu_x(PO₄)₇ phosphors exhibited good color coordinates (0.6516, 0.3480), high color purity (~96.3%), and high quantum efficiency (~78%). Temperature‐dependent emission spectra showed that the phosphors possessed good thermal stability. A white light‐emitting diode (LED) device were fabricated by integrating a mixture of obtained phosphors, commercial green‐emitting and blue‐emitting phosphors into a near‐ultraviolet LED chip. The fabricated white LED device emits glaring white light with high color rendering index (83.9) and proper correlated color temperature (5570 K). These results demonstrate that the Ca₈ZnLa_1?xEu_x(PO₄)₇ phosphors are a promising candidate for solid‐state lighting.     

Phase Transformation in Ca3(PO4)2:Eu2+ via the Controlled Quenching and Increased Eu2+ Content: Identification of New Cyan‐Emitting α‐Ca3(PO4)2:Eu2+ Phosphor

A case of phosphor is reported where the cooling rate parameter significantly influences the luminescence property. By quenching the sample after the high‐temperature solid‐state reaction at 1250°C, we successfully prepared the Eu²⁺‐doped α form Ca₃(PO₄)₂ (α‐TCP:Eu²⁺) as a new kind of bright cyan‐emitting phosphor. The unusual emission color variation (from cyan to blue) depends on the cooling rate after sintering and Eu²⁺ doping level as it was observed in the TCP‐based phosphors. By the Rietveld analysis, it is revealed that the cyan‐ and blue‐emitting phosphors are two different TCP forms crystallizing in the monoclinic (space group P2₁/a, α‐TCP) and the rhombohedral structure (space group R3c, β‐TCP), respectively. Upon 365 nm UV light excitation, α‐TCP:Eu²⁺ exhibits an asymmetric broad‐band cyan emission peaking at 480 nm, while β‐TCP:Eu²⁺ displays a relatively narrow‐band blue emission peaking at 416 nm. The Eu²⁺‐doping in Ca₃(PO₄)₂ shifts the upper temperature limit of the stable structural range of β form from 1125°C to ≥1250°C. Moreover, the crystal structures of α/β‐TCP:Eu²⁺ were compared in the aspects of compactness and cation site sets. The emission thermal stability of α/β‐TCP:Eu²⁺ was comparatively characterized and the difference was related to the specific host structural features.     

Structural and Optical Properties of Tunable Warm‐White Light‐Emitting ZrO2:Dy3+–Eu3+ Nanocrystals

A series of Dy³⁺–Eu³⁺‐codoped ZrO₂ nanocrystals with tetragonal and cubic symmetry was synthesized via a wet chemical reaction. When the Eu³⁺‐doping content was fixed, the crystal structure could be stabilized from the mixed phase to single cubic phase by simply adjusting the content of Dy³⁺. The cubic ZrO₂:Dy³⁺–Eu³⁺ nanoparticles exhibited spherical and nonagglomerated morphology. The effective phonon energy of cubic ZrO₂:5%Dy³⁺–5%Eu³⁺ was calculated to be 445 cm^?1, which is lower than the previously reported results. Extensive luminescence studies of ZrO₂:Dy³⁺–Eu³⁺ as a function of Dy³⁺ content demonstrated that the dopant concentration and its site symmetry play an important role in the emissive properties. Under 352 nm excitation, the increment of Dy³⁺ concentration in ZrO₂:Dy³⁺–Eu³⁺ led to an increase in orange (590 nm) and red (610 nm) emissions of Eu³⁺ ions, which are attributed to the ⁵D₀→⁷F_J(J = 1, 2) transitions of Eu³⁺ ions. This increment is possibly due to the efficient energy transfer (ET) ⁴F_9/2:Dy³⁺→⁵D₀:Eu³⁺. The phosphors can generates light from yellow through near white and eventually to warm white by properly tuning the concentration of Dy³⁺ ions through the ET and change in site symmetry. These phosphors may be promising as warm‐white‐/yellow‐emitting phosphors.     

Tunable Color of Eu2+/Mn2+ Coactivated Na5Ca2Al(PO4)4 via Energy Transfer

Eu²⁺ and Eu²⁺/Mn²⁺‐activated Na₅Ca₂Al(PO₄)₄ phosphors have been synthesized by the combustion method. X‐ray powder diffraction profiles, luminescence spectra, chromaticity variation, and energy transfer of Na₅Ca₂Al(PO₄)₄:Eu²⁺, Mn²⁺ were investigated as a function of the Eu²⁺ and Mn²⁺ concentrations in Na₅Ca₂Al(PO₄)₄. The Na₅Ca₂Al(PO₄)₄:Eu²⁺,Mn²⁺ phosphors can be effectively excited at wavelength ranging from 300 to 430 nm, which matches well with that for near‐ultraviolet (UV) light‐emitting diode (LED) chips. Under excitation at 354 nm, Na₅Ca₂Al(PO₄)₄:Eu²⁺,Mn²⁺ not only exhibits blue‐green emission band attributed to 4f⁶5d¹→4f⁷ of Eu²⁺ but also gives an orange emission band attributed to ⁴T₁→⁶A₁ of Mn²⁺. The emission color of the phosphor can be systematically tuned from blue‐green through white and eventually to orange by adjusting the relative content of Eu²⁺ and Mn²⁺ through the principle of energy transfer. The results indicated that Na₅Ca₂Al(PO₄)₄:Eu²⁺, Mn²⁺ may serve as a potential color‐tunable phosphor for near UV white‐light LED.     

Preparation and Luminescence Properties of Blue‐emitting Phosphor Ba2Ca(PO4)2:Eu2+

Using the conventional high temperature solid‐state reaction method Ba₂Ca(PO₄)₂:Eu²⁺ phosphors were prepared. The phase structure, photoluminescence (PL) properties, and the PL thermal stability of the samples were investigated, respectively. Under the excitation at 365 nm, the phosphor exhibited an asymmetric broad‐band blue emission with peak at 454 nm, which is ascribed to the 4f–5d transition of Eu²⁺. It was further proved that the dipole–dipole interactions results in the concentration quenching of Eu²⁺ in Ba₂Ca_1?x (PO₄)₂:xEu²⁺ phosphors. When the temperature turned up to 150°C, the emission intensity of Ba₂Ca_0.99(PO₄)₂:0.01Eu²⁺ phosphor was 59.07% of the initial value at room temperature. The activation energy ΔE was calculated to be 0.30 eV, which proved the good thermal stability of the sample. All the properties indicated that the blue‐emitting Ba₂Ca(PO₄)₂:Eu²⁺ phosphor has potential application in white LEDs.     

White‐Emitting Tuning and Energy Transfer in Eu2+/Mn2+‐Substituted Apatite‐Type Fluorophosphate Phosphors

Herein, a series of Eu²⁺&Mn²⁺substituted fluorophosphates Ca₆Gd₂Na₂(PO₄)₆F₂ phosphor with apatite structure have been synthesized and investigated by the powder X‐ray diffraction, photoluminescence spectra, fluorescence decay curves, thermal quenching, and chromaticity properties. Particularly, both Eu²⁺ and Mn²⁺ emissions at the two different lattice sites 4f and 6h in Ca₆Gd₂Na₂(PO₄)₆F₂ matrix have been identified and discussed. The dual energy transfer of Eu²⁺→Mn²⁺ and Gd³⁺→Mn²⁺ in Ca₆Gd₂Na₂(PO₄)₆F₂:Eu²⁺,Mn²⁺ samples have been validated and confirmed by the photoluminescence spectra. The dependence of color‐tunable on the activator concentration of Mn²⁺ was investigated to realize white light emission. By varying the doping concentration of the Mn²⁺ ion, a series of tunable colors including pure white light and candle light are obtained under the excitation of 350 nm. Moreover, the fluorescence decay curves have been fitted and analyzed using the Inokuti–Hirayama theoretical model to estimate the Eu–Mn interaction mechanism. We also investigated temperature‐dependent photoluminescence quenching characteristics according to the Arrhenius equation. Preliminary studies on the properties of the phosphor indicated that the obtained phosphors might have potential application as a single‐component white‐emitting phosphor for UV‐based white LEDs.     

Crystal structure and luminescence properties of a single‐component white‐light‐emitting phosphor Ca8ZnLa(PO4)7:Eu2+,Mn2+

A series of novel green emission Whitlockite‐type Ca₈ZnLa(PO₄)₇:Eu²⁺ and color tunable Ca₈ZnLa(PO₄)₇:Eu²⁺,Mn²⁺ phosphors were prepared by the solid‐state reaction method in a reducing atmosphere. Its crystal structure and phase composition were identified by high‐resolution transmission electron microscopy, selected area electronic diffraction, X‐ray photoelectron spectroscopy, and X‐ray powder diffraction Rietveld refinement, and it was found to be trigonal, belonging to R‐3c(161) space group. The luminescence properties of Eu²⁺ singly doped and Eu²⁺/Mn²⁺ codoped Ca₈ZnLa(PO₄)₇ phosphors were revealed in detail. Ca₈ZnLa(PO₄)₇:Eu²⁺ is excitable over a broad range from 200 to 450 nm with a prominent green emitting. With varied Eu²⁺/Mn²⁺ ratios, fine‐tune emission under 365 nm excitation can be achieved from green (0.221, 0.468) to magenta (0.391, 0.276), especially the warm white light (0.392, 0.352), and CCT 3500 K can be obtained by the process of energy transfer between Eu²⁺ and Mn²⁺. The ET mechanism in this system is managed via the dipole‐dipole interaction with the maximum energy‐transfer efficiency 82.8% based on the decay lifetime data. These results suggest that as‐prepared phosphors can serve as promising candidates of UV‐pumped w‐LEDs.     

Structure and Luminescence of New Red‐Emitting Materials‐Eu3+‐Doped Triple Orthovanadates NaALa(VO4)2 (A = Ca,Sr, Ba)

The new red‐emitting phosphors of Eu³⁺‐doped triple orthovanadates NaALa(VO₄)₂ (A = Ca, Sr, Ba) were prepared by the high‐temperature solid‐state reaction. The formation of single phase compound with isostructural structure of Ba₃(VO₄)₂ was verified through X‐ray diffraction (XRD) studies. The photoluminescence excitation and emission spectra, the fluorescence decay curves and the dependence of luminescence intensity on doping level were investigated. The phosphor can be efficiently excited by near UV and blue light to realize an intense red luminescence (613 nm) corresponding to the electric dipole transition ⁵D₀→⁷F₂ of Eu³⁺ ions. Their potential applications as red‐emitting phosphors for solid‐state lighting were evaluated in comparison with the Eu³⁺‐doped lanthanum orthovanadate LaVO₄ and other reported references. The luminescence was discussed in detail on the base of the crystal structures. The luminescence thermal stability on temperature was investigated and the thermal activated energy was calculated. The phosphors can be suggested to be a potential red‐emitting phosphor for the application on white LEDs under irradiation of near‐UV or blue chips.     

Spectral Properties of Pr3+‐Doped Transparent‐Glass‐Ceramic Containing Ca5(PO4)3F Nanocrystals

A Pr³⁺‐doped transparent oxyfluoride glass‐ceramic containing Ca₅(PO₄)₃F nanocrystals was prepared by melt quenching and subsequent thermal treatment. The crystallization phase and morphology of the Ca₅(PO₄)₃F nanocrystals were investigated by X‐ray diffraction and transmission electron microscope, respectively. The volume fraction of the Ca₅(PO₄)₃F nanocrystals in the glass‐ceramic is about 10% and the fraction of Pr³⁺ ions incorporated into the Ca₅(PO₄)₃F nanocrystals is about 22%. The peak absorption cross sections at 435 and 574 nm increase up to 128% and 132% after crystallization, respectively. The peak stimulated emission cross sections of the ³P₀→³H₄ blue laser channel and ³P₀→³F₂ red laser channel for the glass‐ceramic are 4.95 × 10^?20 and 29.8 × 10^?20 cm², respectively. The spectral properties indicate that the glass‐ceramic is a potential visible laser material.     

Synthesis,structural characterization,and photoluminescence properties of Eu3+‐doped Mg3‐xEux(BO3)2 phosphor

Eu³⁺‐doped Mg_3‐xEu_x(BO₃)₂ (x = 0.000, 0.005, 0.010, 0.020, 0.050, and 0.100) phosphors were synthesized for the first time by solution combustion synthesis method, which is a fast synthesis method for obtaining nano‐sized borate powders. The optimization of the synthesis conditions of phosphor materials was performed by TG/DTA method. These phosphors were characterized by XRD, FTIR, SEM‐EDX, and photoluminescence, PL analysis. The XRD analysis exhibited that all of the prepared ceramic compounds have been crystallized in orthorhombic structure with space group Pnnm. Also, the influence of europium dopant ions on unit cell parameters of host material was analyzed using Jana2006 program and the crystalline size was determined by Debye‐Scherrer's formula. The luminescence properties of all Eu³⁺‐doped samples were investigated by excitation and emission spectra. The excitation spectra of Mg_3‐xEu_x(BO₃)₂ phosphors show characteristic peak at 420 nm in addition to other characteristic peaks of Eu³⁺ under emission at 613 nm. The emission spectra of Eu³⁺‐doped samples indicated most intensive red emission band dominated at 630 nm belonging to ⁵D₀→⁷F₂ magnetic dipole transition. Furthermore, the optimum or quenching concentration of Eu³⁺ ion has been determined as x = 0.010 showed the maximum emission intensity when it was excited at 394 nm.     

Synthesis and photoluminescence enhancement of Ca3Sr3(VO4)4:Eu3+ red phosphors by co-doping with La3+

In this study, a series of red-emitting Ca₃Sr₃(VO₄)₄:Eu³⁺ phosphors co-doped with La³⁺ was prepared using the combustion method. The microstructures, morphologies, and photoluminescence properties of the phosphors were investigated. All Ca₃Sr₃(VO₄)₄:Eu³⁺, La³⁺ samples synthesized at temperatures greater than 700 ℃ exhibited the same standard rhombohedral structure of Ca₃Sr₃(VO₄)₄. Furthermore, the Ca₃Sr₃(VO₄)₄:Eu³⁺, La³⁺ phosphor was effectively excited by near-ultraviolet light of 393 nm and blue light of 464 nm. The strong excitation peak at 464 nm corresponded to the ⁷F₀→⁵D₂ electron transition of Eu³⁺. The strong emission peak observed at 619 nm corresponded to the ⁵D₀→⁷F₂ electron transition of Eu³⁺. Co-doping with La³⁺ significantly improved the emission intensity of Ca₃Sr₃(VO₄)₄:Eu³⁺ red phosphors. The optimum luminescence of the phosphor was observed at Eu³⁺ and La³⁺ concentrations of 5% and 6%, respectively. Moreover, co-doping with La³⁺ also improved the fluorescence lifetime and thermal stability of the Ca₃Sr₃(VO₄)₄:Eu³⁺ phosphor. The CIE chromaticity coordinate of Ca₃Sr₃(VO₄)₄:0.05Eu³⁺, 0.06La³⁺ was closer to the NTSC standard for red phosphors than those of other commercial phosphors; moreover, it had greater color purity than that of all the samples tested. The red emission intensity of Ca₃Sr₃(VO₄)₄:0.05Eu³⁺, 0.06La³⁺ at 619 nm was ~1.53 times that of Ca₃Sr₃(VO₄)₄:0.05Eu³⁺ and 2.63 times that of SrS:Eu²⁺. The introduction of charge compensators could further increase the emission intensity of Ca₃Sr₃(VO₄)₄:Eu³⁺, La³⁺ red phosphors. The phosphors synthesized herein are promising red-emitting phosphors for applications in white light-emitting diodes under irradiation by blue chips.     

A single‐phase full‐color emitting phosphor Na3Sc2(PO4)3:Eu2+/Tb3+/Mn2+ with near‐zero thermal quenching and high quantum yield for near‐UV converted warm w‐LEDs

A single‐phase full‐color emitting phosphor Na₃Sc₂(PO₄)₃:Eu²⁺/Tb³⁺/Mn²⁺ has been synthesized by high‐temperature solid‐state method. The crystal structure is measured by X‐ray diffraction. The emission can be tuned from blue to green/red/white through reasonable adjustment of doping ratio among Eu²⁺/Tb³⁺/Mn²⁺ ions. The photoluminescence, energy‐transfer efficiency and concentration quenching mechanisms in Eu²⁺‐Tb³⁺/Eu²⁺‐Mn²⁺ co‐doped samples were studied in detail. All as‐obtained samples show high quantum yield and robust resistance to thermal quenching at evaluated temperature from 30 to 200°C. Notably, the wide‐gamut emission covering the full visible range of Na₃Sc₂(PO₄)₃:Eu²⁺/Tb³⁺/Mn²⁺ gives an outstanding thermal quenching behavior near‐zero thermal quenching at 150°C/less than 20% emission intensity loss at 200°C, and high quantum yield‐66.0% at 150°C/56.9% at 200°C. Moreover, the chromaticity coordinates of Na₃Sc₂(PO₄)₃:Eu²⁺/Tb³⁺/Mn²⁺ keep stable through the whole evaluated temperature range. Finally, near‐UV w‐LED devices were fabricated, the white LED device (CCT = 4740.4 K, Ra = 80.9) indicates that Na₃Sc₂(PO₄)₃:Eu²⁺/Tb³⁺/Mn²⁺ may be a promising candidate for phosphor‐converted near‐UV w‐LEDs.     

Synthesis and luminescence enhancement of red-emitting Sr9Y(PO4)7:Eu3+ phosphor through Gd3+ co-doping for white light-emitting diodes

A series of Sr₉Y(PO₄)₇:Eu³⁺ and Sr₉Y(PO₄)₇:Eu³⁺, Gd³⁺ red-emitting phosphors were prepared via a high-temperature solid-state method, Gd³⁺ ion was co-doped in Sr₉Y(PO₄)₇:Eu³⁺ as sensitizer to enhance the luminescence property. The X-ray diffraction results verify that the structure of the as-prepared samples is consistent with the standard Sr₉Y(PO₄)₇ phase. All the Sr₉Y(PO₄)₇:Eu³⁺ samples show both characteristic emission peaks at 594 nm and 614 nm under near-ultraviolet excitation of 394 nm. The co-doping of Gd³⁺ significantly improves the luminescence intensity of the Sr₉Y(PO₄)₇:Eu³⁺ phosphors due to the crystal field environment effect and energy transfer of Gd³⁺→Eu³⁺ caused by the introduction of Gd³⁺, especially Sr₉Y(PO₄)₇:0.11Eu³⁺, 0.05Gd³⁺, which emission intensity is higher than that of Sr₉Y(PO₄)₇:0.11Eu³⁺ by 1.21 times. The color purity and lifetime of Sr₉Y(PO₄)₇:0.11Eu³⁺, 0.05Gd³⁺ phosphor are 88.26% and 3.7615 ms, respectively. A w-LED device was packaged via coating the as-prepared phosphor on n-UV chip of 395 nm with commercial phosphors. These results exhibit that the Sr₉Y(PO₄)₇:Eu³⁺, Gd³⁺ red-emitting phosphor can be used as a red component in the w-LEDs application.     

New apatite-type phosphor Ca9La(PO4)5(SiO4)F2:Tb3+,Dy3+ with improved color rendering index

Ca₉La(PO₄)₅(SiO₄)F₂:Tb³⁺,Dy³⁺ (CLPSF:Tb³⁺,Dy³⁺) phosphors were successfully prepared using the traditional solid-state technique. The crystal structure was refined and the luminescence properties have been examined in detail. The band gap and electronic structure of Ca₉La(PO₄)₅(SiO₄)F₂ were performed by the periodic density functional theory (DFT) calculation. The spectral and fluorescence decay dynamics of CLPSF:Tb³⁺,Dy³⁺ show that the energy transfer behavior between Tb³⁺ and Dy³⁺ ions is observed. The CLPSF:Tb³⁺,Dy³⁺ phosphors can be efficiently excitable at the wavelengths range from 300 to 500 nm. The emission spectrum covers the whole visible part of the spectra with the sharp emission bands in red, green, and blue regions. The correlated color temperature (CCT) and color rendering index (CRI) of white light emission could be improved by the fine-tuning of the Tb³⁺ and Dy³⁺ ions ration in accordance with the energy transfer behavior. Thus, the CLPSF:Tb³⁺,Dy³⁺ phosphor could be used as a material for the near-ultraviolet (n-UV) and white light-emitting diodes (w-LEDs).     

Luminescence enhancement of single-component Ca19Zn2(PO4)14:Dy3+ white-emitting phosphor powders through partial substitution of PO43− with SiO44− and BO33-

A series of Ca₁₉Zn₂(PO₄)_14-yAG_y:Dy³⁺ (AG = BO₃^3?, SiO₄^4?) white-emitting phosphors with partial PO₄^3? substitution were synthesized through high-temperature solid-state reaction. The BO₃^3? and SiO₄^4? anionic groups were introduced into Ca₁₉Zn₂(PO₄)₁₄:Dy³⁺ for enhancing the luminescence of Dy³⁺. The X-ray diffraction results exhibited that all samples were assigned to the standard trigonal Ca₁₉Zn₂(PO₄)₁₄ structure with R3c (161) space group. The white emission spectrum of Dy³⁺-doped phosphors was composed of several characteristic peaks located at 484 nm, 575 nm and 665 nm, corresponding to ⁴F_9/2 → ⁶H_15/2, ⁶H_13/2 and ⁶H_11/2 electron transitions, respectively. After partial SiO₄^4? and BO₃^3? substituting PO₄^3?, the luminescence intensity of Ca_18.62Zn₂(PO₄)_13.75(SiO₄)_0.25:0.38Dy³⁺ and Ca_18.62Zn₂(PO₄)_13.65(BO₃)_0.35:0.38Dy³⁺ samples were higher by 1.68 and 1.49 times than that of Ca_18.62Zn₂(PO₄)₁₄:0.38Dy³⁺ sample, respectively, due to the charge compensation and crystal field environment effect. The actual w-LEDs fabricated with as-prepared Ca_18.62Zn₂(PO₄)_13.75(SiO₄)_0.25:0.38Dy³⁺ and Ca_18.62Zn₂(PO₄)_13.65(BO₃)_0.35:0.38Dy³⁺ phosphors showed excellent optical performances. All results indicated that the single component Ca_18.62Zn₂(PO₄)_14-yAG_y:0.38Dy³⁺ white-emitting phosphors could have a potential application in w-LEDs.     

Near white light emission from K+ ion compensated CaSO4:Dy3+,Eu3+ phosphors

Dy³⁺:Eu³⁺ doped calcium sulfate (CaSO₄:Dy³⁺,Eu³⁺) phosphors co-doped with various K⁺ compensator concentrations were synthesized by recrystallization method. These orthorhombic phased phosphors showed intense multi-color near white light. The multi-color aspect ratios and the emission life times were strongly dependent on K⁺-concentration. These results suggest that the rare-earth (Re³⁺) ions are situated at the sites of Ca²⁺ and the site occupancy was being compensated by K⁺ ions. The near white light emission and large lifetimes suggest that present phosphor could be potentially applied as a blue excited white light-emitting phosphor for light emitting diodes.     

A novel pure red phosphor Ca8MgLu(PO4)7:Eu3+ for near ultraviolet white light-emitting diodes

A novel red-emitting phosphor Ca₈MgLu(PO₄)₇:Eu³⁺ was synthesized by a high-temperature solid-state reaction method. Its crystal structure, photoluminescence emission and excitation spectra, and decay time were investigated in detail. X-ray diffraction (XRD) results indicate that Ca₈MgLu(PO₄)₇ crystallizes in single-phase component with a whitlockite-like structure and the space group R3c of β-Ca₃(PO₄)₂. The emission spectrum shows a dominant peak at 612 nm due to the dipole ⁵D₀→⁷F₂ transition of Eu³⁺, and the luminescence intensity keeps increasing with increasing the content of Eu³⁺ to 100%. The excitation spectrum is coupled well with the emission of near ultraviolet (NUV) LED (380–410 nm). The CIE coordinates of Ca₈MgLu(PO₄)₇:Eu³⁺ phosphor is (0.654, 0.346), being close to the standard value of National Television Standard Committee (NTSC) for red phosphor, (0.670, 0.330). The internal quantum efficiency of the phosphor is 69% under the excitation of 394 nm. The results show that Ca₈MgLu(PO₄)₇:Eu³⁺ is a very appropriate red-emitting phosphor with a high ratio of red and orange for NUV-based white LEDs.