Fabrication of glycidyl methacrylate-modified silk fibroin/poly(L-lactic acid-co-ε-caprolactone)–polyethylene glycol diacrylate hybrid 3D nanofibrous scaffolds for tissue engineering

In order to provide a biomimetic natural extracellular matrix microenvironment with excellent mechanical capacity for tissue regeneration, a novel porous hybrid glycidyl methacrylate-modified silk fibroin/poly(L-lactic acid-co-ε-caprolactone)–polyethylene glycol diacrylate (SFMA/P(LLA-CL)–PEGDA) hybrid three-dimensional (3D) nanofibrous scaffolds was successfully fabricated through the combination of 3D nanofibrous platforms and divinyl PEGDA based photocrosslinking, and then further improved water resistance by ethanol vapor post-treatment. Scanning electron microscopy and micro-computed tomography results demonstrated significant PEGDA hydrogel-like matrices bonded nanofibers, which formed a 3D structure similar to that of “steel bar (nanofibers)‒cement (PEGDA)”, with proper pore size, high porosity, and high pore connectivity density. Meanwhile, the hybrid 3D nanofibrous scaffolds showed outstanding swelling properties as well as improved compressive and tensile properties. Furthermore, these hybrid 3D nanofibrous scaffolds could provide a biocompatible microenvironment, capable of inducing the material‒cell hybrid and regulating human umbilical vein endothelial cells proliferation. They thus present significant potential in tissue regeneration.     

3D Bioplotting of Gelatin/Alginate Scaffolds for Tissue Engineering:Influence of Crosslinking Degree and Pore Architecture on Physicochemical Properties

Gelatin/Alginate hydrogels were engineered for bioplotting in tissue engineering. One major drawback of hydrogel scaffolds is the lack of adequate mechanical properties. In this study, using a bioplotter, we constructed the scaffolds with different pore architectures by deposition of gelatin/alginate hydrogels layerby-layer. The scaffolds with different crosslinking degree were obtained by post-crosslinking methods.Their physicochemical properties, as well as cell viability, were assessed. Different crosslinking methods had little influence on scaffold architecture, porosity, pore size and distribution. By contrast, the water absorption ability, degradation rate and mechanical properties of the scaffolds were dramatically affected by treatment with various concentrations of crosslinking agent(glutaraldehyde). The crosslinking process using glutaraldehyde markedly improved the stability and mechanical strength of the hydrogel scaffolds. Besides the post-processing methods, the pore architecture can also evidently affect the mechanical properties of the scaffolds. The crosslinked gelatin/alginate scaffolds showed a good potential to encapsulate cells or drugs.     

Fabrication and cell affinity of biomimetic structured PLGA/articular cartilage ECM composite scaffold

An ideal scaffold for cartilage tissue engineering should be biomimetic in not only mechanical property and biochemical composition, but also the morphological structure. In this research, we fabricated a composite scaffold with oriented structure to mimic cartilage physiological morphology, where natural nanofibrous articular cartilage extracellular matrix (ACECM) was used to mimic the biochemical composition, and synthetic PLGA was used to enhance the mechanical strength of ACECM. The composite scaffold has well oriented structure and more than 89% of porosity as well as about 107 μm of average pore diameter. The composite scaffold was compared with ACECM and PLGA scaffolds. Cell proliferation test showed that the number of MSCs in ACECM and composite scaffolds was noticeably bigger than that in PLGA scaffold, which was coincident with results of SEM observation and cell viability staining. The water absorption of ACECM and composite scaffolds were 22.1 and 10.2 times respectively, which was much higher than that of PLGA scaffolds (3.8 times). The compressive modulus of composite scaffold in hydrous status was 1.03 MPa, which was near 10 times higher than that of hydrous ACECM scaffold. The aforementioned results suggested that the composite scaffold has the potential for application in cartilage tissue engineering.     

Influence of pore size on tensile strength, permeability and porosity of hyaluronan-collagen scaffolds

Recent investigations have shown the importance of scaffold pore size on the realisation of tissue engineered cartilage which promotes cell adhesion, proliferation and differentiation. The objective of this study was to investigate the influence of pore size on the mechanical properties, the permeability and the porosity of hyaluronan-collagen scaffolds. Hyaluronan-collagen scaffolds with three different mean pore sizes (302.5, 402.5 and 525 microm) have been produced according to a standardised protocol. The maximum stress at rupture, the Young's Moduli, permeability and porosity of the scaffolds were investigated. The permeability was determined both empirically and mathematically. Increased pore sizes indicated a larger stress at rupture as well as increased Young's Moduli. Porosity and permeability were raised by increasing pore sizes. The mathematically calculated permeability showed the same trend. The results indicate a higher mechanical stability for scaffolds with larger pores. The experimental and mathematical experiments both show increased permeability and fluid mobility for larger pores in scaffolds. Morphological changes resulting from the alteration of pore size led to non-correlation between the calculated and the experimental permeability.     

Novel 3D scaffold with enhanced physical and cell response properties for bone tissue regeneration,fabricated by patterned electrospinning/electrospraying

Developing three dimensional scaffolds mimicking the nanoscale structure of native extracellular matrix is a key parameter in tissue regeneration. In this study, we aimed to introduce a novel 3D structures composed of nanofibers (NF) and micro particles (MP) and compare their efficiency with 2D nanofibrous scaffold. The conventional nanofibrous PCL scaffolds are 2D mats fabricated by the electrospinning technique, whereas the NF/MP and patterned NF/MP PCL scaffolds are three dimensional structures fabricated by a modified electrospinning/electrospraying technique. The mentioned method was carried out by varying the electrospinning solution parameters and use of a metal mesh as the collector. Detailed fabrication process and morphological properties of the fabricated structures is discussed and porosity, pore size and PBS solution absorption value of the prepared structures are reported. Compared with the 2D structure, 3D scaffolds possessed enhanced porosity and pore size which led to the significant increase in their water uptake capacity. In vitro cell experiments were carried out on the prepared structures by the use of MG-63 osteosarcoma cell line. The fabricated 3D structures offered significantly increased cell attachment, spread and diffusion which were confirmed by SEM analysis. In vitro cytocompatibility assessed by MTT colorimetric assay indicated a continuous cell proliferation over 21 days on the innovative 3D structure, while on 2D mat cell proliferation stopped at early time points. Enhanced osteogenic differentiation of the seeded MG-63 cells on 3D scaffold was confirmed by the remarkable ALP activity together with increased and accelerated calcium deposition on this structure compared to 2D mat. Massive and well distributed bone minerals formed on patterned 3D structure were shown by EDX analysis. In comparison between NF/MP quasi-3D and Patterned NF/MP 3D scaffolds, patterned structures proceeded in all of the above properties. As such, the innovative Patterned NF/MP 3D scaffold could be considered as a proper bone graft substitute for bone tissue regeneration.     

介孔生物活性玻璃/脱钙骨复合支架的制备及性能研究

将介孔生物活性玻璃(MBG)与脱钙骨(DB)复合, 利用浸渍法制备出MBG/DB复合支架材料. 采用红外光谱(FTIR), 扫描电镜(SEM), X射线衍射(XRD), 电子万能材料试验机等方法对牛松质骨(CB)、DB、MBG/DB复合支架进行表征. 结果表明, CB经浸酸处理后制备的DB, 孔径大小在200~600μm范围内, 孔隙率约为71%, 抗压性能比CB明显降低(1.10±0.31)MPa, 而采用浸渍法制备的复合支架, 孔隙率降为40%左右, 而压缩强度明显提高(8.49± 2.14)MPa. 体外生物活性测试表明: 复合支架具有良好的生物活性.     

Three dimensional printed macroporous polylactic acid/hydroxyapatite composite scaffolds for promoting bone formation in a critical-size rat calvarial defect model

We have explored the applicability of printed scaffold by comparing osteogenic ability and biodegradation property of three resorbable biomaterials. A polylactic acid/hydroxyapatite (PLA/HA) composite with a pore size of 500 μm and 60% porosity was fabricated by three-dimensional printing. Three-dimensional printed PLA/HA, β-tricalcium phosphate (β-TCP) and partially demineralized bone matrix (DBM) seeded with bone marrow stromal cells (BMSCs) were evaluated by cell adhesion, proliferation, alkaline phosphatase activity and osteogenic gene expression of osteopontin (OPN) and collagen type I (COL-1). Moreover, the biocompatibility, bone repairing capacity and degradation in three different bone substitute materials were estimated using a critical-size rat calvarial defect model in vivo. The defects were evaluated by micro-computed tomography and histological analysis at four and eight weeks after surgery, respectively. The results showed that each of the studied scaffolds had its own specific merits and drawbacks. Three-dimensional printed PLA/HA scaffolds possessed good biocompatibility and stimulated BMSC cell proliferation and differentiation to osteogenic cells. The outcomes in vivo revealed that 3D printed PLA/HA scaffolds had good osteogenic capability and biodegradation activity with no difference in inflammation reaction. Therefore, 3D printed PLA/HA scaffolds have potential applications in bone tissue engineering and may be used as graft substitutes in reconstructive surgery.     

β-CaSiO_3/丝素蛋白复合支架材料结构与性能的研究

利用冷冻干燥法制备了β-CaSiO_3/丝素蛋白复合支架材料,经XRD和FTIR分析表明复合支架中丝素的结构主要以β-折叠为主;SEM分析显示材料孔隙分布均匀,孔连通性较好,孔径尺寸约为100～300μm.对支架的孔隙率和机械强度等性能进行了表征,研究表明复合支架的孔隙率为83%～87%,机械强度有较大提高.应用模拟体液浸泡实验研究了复合支架的体外生物活性,并用XRD、FESEM和EDS对试样表面进行了表征;结果显示,样品经模拟体液浸泡3天后,表面都能沉积出类骨羟基磷灰石(HA)层,β-CaSiO_3的加入能加快复合支架表面沉积类骨HA的速度.研究结果显示β-CaSiO_3/丝素蛋白复合支架材料有望作为强度较好的生物活性硬组织修复材料.     

Evaluating cell proliferation based on internal pore size and 3D scaffold architecture fabricated using solid freeform fabrication technology

The scaffold, as a medical component to regenerate tissues or organs in humans, plays an important role in tissue engineering. Recently, solid freeform fabrication (SFF) technology using computer-assisted methods was applied to address the problems of conventional fabrication methods in which the internal/outer architectures cannot be controlled. In this report, we propose suitable scaffolds for bone tissue regeneration considering the internal pore size and scaffold architecture. Poly(propylene fumarate) was used as the biodegradable photopolymer, and scaffolds were fabricated using microstereolithography (MSTL). We observed the relationship between the internal pores and architecture, and the proliferation of pre-osteoblast cells. To demonstrate the superiority of MSTL, we fabricated conventional and SFF scaffolds, and measured the cell proliferation rates for each. The results showed that cell proliferation on the MSTL scaffold was clearly superior and indicated that MSTL would be a good replacement for current conventional methods.     

Biodegradable polycaprolactone scaffold with controlled porosity obtained by modified particle-leaching technique

Scaffold with controlled porosity constitute a cornerstone in tissue engineering, as a physical support for cell adhesion and growth. In this work, scaffolds of polycaprolactone were synthesized by a modified particle leaching method in order to control porosity and pore interconnectivity; the aim is to observe their influence on the mechanical properties and, in the future, on cell adhesion and proliferation rates. Low molecular weight PEMA beads with an average size of 200 μm were sintered with various compression rates in order to obtain the templates (negatives of the scaffolds). Then the melt polycaprolactone was injected into the porous template under nitrogen pressure in a custom made device. After cooling and solidifying of the melt polymer, the porogen was removed by selective dissolution in ethanol. The porosity and morphology of the scaffold were studied as well as the mechanical properties. Porosities from 60% to 85% were reached; it was found that pore interconnectivity logically increases with increasing porosity, and that mechanical strength decreases with increasing porosity. Because of their interesting properties and interconnected structure, these scaffolds are expected to find useful applications as a cartilage or bone repair material.     

RGD-modified acellular bovine pericardium as a bioprosthetic scaffold for tissue engineering

Acellular biological tissues, including bovine pericardia (BP), have been proposed as natural biomaterials for tissue engineering. However, small pore size, low porosity and lack of extra cellular matrix (ECM) after native cell extraction directly restrict the seed cell adhesion, migration and proliferation and which is a vital problem for ABP’s application in the tissue engineered heart valve (TEHV). In the present study, we treated acellular BP with acetic acid, which increased the scaffold pore size and porosity and conjugated RGD polypeptides to ABP scaffolds. After 10 days of culture in vitro, the human mesenchymal stem cells (hMSCs) attached the best and proliferated the fastest on RGD-modified acellular scaffolds, and the cell has grown deep into the scaffold. In contrast, a low density of cells attached to the unmodified scaffolds, with few infiltrating into the acellular tissues. These findings support the potential use of modified acellular BP as a scaffold for tissue engineered heart valves.     

Fabrication and development of artificial osteochondral constructs based on cancellous bone/hydrogel hybrid scaffold

Using tissue engineering techniques, an artificial osteochondral construct was successfully fabricated to treat large osteochondral defects. In this study, porcine cancellous bones and chitosan/gelatin hydrogel scaffolds were used as substitutes to mimic bone and cartilage, respectively. The porosity and distribution of pore size in porcine bone was measured and the degradation ratio and swelling ratio for chitosan/gelatin hydrogel scaffolds was also determined in vitro. Surface morphology was analyzed with the scanning electron microscope (SEM). The physicochemical properties and the composition were tested by using an infrared instrument. A double layer composite scaffold was constructed via seeding adipose-derived stem cells (ADSCs) induced to chondrocytes and osteoblasts, followed by inoculation in cancellous bones and hydrogel scaffolds. Cell proliferation was assessed through Dead/Live staining and cellular activity was analyzed with IpWin5 software. Cell growth, adhesion and formation of extracellular matrix in composite scaffolds blank cancellous bones or hydrogel scaffolds were also analyzed. SEM analysis revealed a super porous internal structure of cancellous bone scaffolds and pore size was measured at an average of 410 ± 59 μm while porosity was recorded at 70.6 ± 1.7 %. In the hydrogel scaffold, the average pore size was measured at 117 ± 21 μm and the porosity and swelling rate were recorded at 83.4 ± 0.8 % and 362.0 ± 2.4 %, respectively. Furthermore, the remaining hydrogel weighed 80.76 ± 1.6 % of the original dry weight after hydration in PBS for 6 weeks. In summary, the cancellous bone and hydrogel composite scaffold is a promising biomaterial which shows an essential physical performance and strength with excellent osteochondral tissue interaction in situ. ADSCs are a suitable cell source for osteochondral composite reconstruction. Moreover, the bi-layered scaffold significantly enhanced cell proliferation compared to the cells seeded on either single scaffold. Therefore, a bi-layered composite scaffold is an appropriate candidate for fabrication of osteochondral tissue.     

Fabrication and characterization of poly-d-l-lactide/nano-hydroxyapatite composite scaffolds with poly (ethylene glycol) coating and dexamethasone releasing

The control of pore size and structure, drug release capacity, and biodegradation of scaffolds is of importance for bone tissue engineering. In this study, a technique combining polymer coagulation, cold compression molding, salt particulate leaching and drug coating method was developed to fabricate poly (ethylene glycol)/dexamethasone coated porous poly-d-l-lactide/nano-hydroxyapatite (PDLLA/nano-HAp) scaffolds. These scaffolds possess homogenous pore networks with high porosity (66-82%) and controllable pore size (200-300 μm). The compressive moduli and strength of the scaffolds after incorporation of nano-HAp were improved by 50% and 20%, respectively. The surface hydrophilicity of the scaffold was significantly improved by poly (ethylene glycol)/dexamethasone coating and nano-HAp addition, leading to a higher initial drug loading amount. The results showed that the drug release behavior of the scaffolds after 35-day immersion in water could be adjusted by varying the porosity level and by incorporation of 20 wt.% of nano-HAp.     

骨组织工程用硅胶/掺锶β-磷酸三钙/硫酸钙复合多孔支架的制备与性能研究

以掺锶β-磷酸三钙/硫酸钙为原料,利用搅拌喷雾干燥法制备出掺锶β-磷酸三钙/硫酸钙复合小球,再将硅胶与制备的复合小球复合,通过在模具中堆垛聚集的方法,制备出硅胶/掺锶β-磷酸三钙/硫酸钙复合生物支架。采用XRD,SEM,FT-IR等方法分析制得复合多孔支架的成分、形貌以及结构特征,并研究复合生物支架的降解性、孔隙率、力学性能和细胞毒性等。结果表明:该复合多孔生物支架具有一定的不规则孔洞结构,小球与小球之间的孔隙约为0.2~1mm,而每个小球上也有大量的微孔,孔径在50~200μm之间,且平均孔隙率达到62%,基本能满足骨组织工程支架对孔隙率的要求;该复合多孔支架无细胞毒性,其降解周期约为80天,抗压强度约为0.1MPa,因此该支架在非承重骨组织修复方面具有良好的应用前景。     

Hydroxyapatite (HA) bone scaffolds with controlled macrochannel pores

Hydroxyapatite (HA) macrochanneled porous scaffolds, with a controlled pore structure, were fabricated via a combination of the extrusion and lamination processes. The scaffold was architectured by aligning and laminating the extruded HA and carbon filaments. The macrochannel pores were formed by removing the carbon filaments after thermal treatments (binder removal and sintering). The porosity of the scaffolds was varied between 48 and 73% with a controlled pore size of ∼450 μm, by adjusting the fractions of HA and carbon filaments. As the porosity was increased from 48 to 73%, the compressive strength decreased from 11.5 to 3.2 MPa. However, the osteoblast-like cell responses on the scaffold, such as the proliferation rate and alkaline phosphatase (ALP) activity, were significantly enhanced as the porosity was increased.     

Preparation of porous biodegradable poly(lactide-co-glycolide)/ hyaluronic acid blend scaffolds: Characterization, in vitro cells culture and degradation behaviors

A series of poly(lactide-co-glycolide) (PLGA)/ hyaluronic acid (HA) blend with different HA composition were used to fabricate scaffolds successfully. The pores of the three dimensional scaffold were prepared by particle leaching and freeze drying. The pore size was about 50–200 μ m and the porosity was about 85%. The characterizations of the scaffold, such as mechanical properties, hydrophilicity and surface morphologies were determined. Mouse 3T3 fibroblast was directly seeded on the scaffolds. The cell adhesion efficiency, cell morphology observed by scanning electron microscopy (SEM) and the degradation behavior of the blend scaffold were evaluated. In summary, the results show that the adhesion efficiency of cells on the PLGA/HA blend scaffold is higher than that on the PLGA scaffold. Moreover, the incorporation of HA in PLGA not only helps to increase the cell affinity but also tends to lead the water and nutrient into the scaffold easily.     

An ordered electrospun polycaprolactone–collagen–silk fibroin scaffold for hepatocyte culture

Nanofiber scaffolds are widely used as the platform for three-dimensional culture of hepatocytes in vitro. The pore size of scaffolds plays an important role in promoting the infiltration and proliferation of hepatocyte. We show that the average pore size of electrospun scaffold increases from ~ 7.6 to 13.2 μm, while the average fiber diameter decreases from ~ 2.0 to 1.5 μm when collected by probe array collectors. Though increase in pore size decreases the tensile stress of scaffolds, it leads to enhance the proliferation and attachment of hepatocytes. Specifically, a 6 × 6 array scaffold which was prepared by probe collector was orderly arrayed. Compared with the conventional scaffold, the pore size of the arrayed scaffold doubled and the hydrophilicity was improved. When HepG₂ cells were seeded on the arrayed scaffold, cells showed superior adhesion ability, better cell morphology and three-dimensional growth. These results indicated that the ordered 6 × 6 array scaffold has the potential as a suitable substratum for in vitro culture of hepatocytes.     

Manufacture and characterisation of EmDerm—novel hierarchically structured bio-active scaffolds for tissue regeneration

There are significant challenges for using emulsion templating as a method of manufacturing macro-porous protein scaffolds. Issues include protein denaturation by adsorption at hydrophobic interfaces, emulsion instability, oil droplet and surfactant removal after protein gelation, and compatible cross-linking methods. We investigated an oil-in-water macro-emulsion stabilised with a surfactant blend, as a template for manufacturing protein-based nano-structured bio-intelligent scaffolds (EmDerm) with tuneable micro-scale porosity for tissue regeneration. Prototype EmDerm scaffolds were made using either collagen, through thermal gelation, fibrin, through enzymatic coagulation or collagen-fibrin composite. Pore size was controlled via surfactant-to-oil phase ratio. Scaffolds were crosslink-stabilised with EDC/NHS for varying durations. Scaffold micro-architecture and porosity were characterised with SEM, and mechanical properties by tensiometry. Hydrolytic and proteolytic degradation profiles were quantified by mass decrease over time. Human dermal fibroblasts, endothelial cells and bone marrow derived mesenchymal stem cells were used to investigate cytotoxicity and cell proliferation within each scaffold. EmDerm scaffolds showed nano-scale based hierarchical structures, with mean pore diameters ranging from 40–100 microns. The Young’s modulus range was 1.1–2.9?MPa, and ultimate tensile strength was 4–16?MPa. Degradation rate was related to cross-linking duration. Each EmDerm scaffold supported excellent cell ingress and proliferation compared to the reference materials Integra? and Matriderm?. Emulsion templating is a novel rapid method of fabricating nano-structured fibrous protein scaffolds with micro-scale pore dimensions. These scaffolds hold promising clinical potential for regeneration of the dermis and other soft tissues, e.g., for burns or chronic wound therapies.     

A novel bioactive three-dimensional β-tricalcium phosphate/chitosan scaffold for periodontal tissue engineering

The development of suitable bioactive three-dimensional scaffold for the promotion of cellular proliferation and differentiation is critical in periodontal tissue engineering. In this study,porous β-tricalcium phosphate/chitosan composite scaffolds were prepared through a freeze-drying method. These scaffolds were evaluated by analysis of microscopic structure, porosity, and cytocompatibility. The gene expression of bone sialoprotein (BSP) and cementum attachment protein (CAP) was detected with RT-PCR after human periodontal ligament cells (HPLCs) were seeded in these scaffolds. Then cell–scaffold complexes were implanted subcutaneously into athymic mice. The protein expression of alkaline phosphatase (ALP) and osteopontin (OPN) was detected in vivo. Results indicated that composite scaffolds displayed a homogeneous three-dimensional microstructure; suitable pore size (120 μm) and high porosity (91.07%). The composite scaffold showed higher proliferation rate than the pure chitosan scaffold, and up-regulated the gene expression of BSP and CAP. In vivo, HPLCs in the composite scaffold not only proliferated but also recruited vascular tissue ingrowth. The protein expression of ALP and OPN was up-regulated in the composite scaffold. Therefore, it was suggested that the composite scaffold could promote the differentiation of HPLCs towards osteoblast and cementoblast phenotypes.