Optimal control of sampled-data piecewise affine systems

This paper discusses the optimal continuous-time control problem of a class of piecewise affine (PWA) systems, where the switching action of the discrete state is determined at each sampling time according to a condition on the continuous state. Such a system is called here the sampled-data PWA (SD-PWA) system. First, important remarks on the control design of this system via the continuous-(or discrete-)time PWA model are pointed out, which motivate us to use the SD-PWA model. Next, based on the good properties of the proposed model, an optimal continuous-time controller of the SD-PWA systems is proposed.     

Stability of sampled-data piecewise affine systems: A time-delay approach

This paper addresses the stability analysis of sampled-data piecewise-affine (PWA) systems consisting of a continuous-time plant in feedback connection with a discrete-time emulation of a continuous-time state feedback controller. The sampled-data system is first considered as a continuous-time system with a variable time delay. Conditions under which the trajectories of the sampled-data closed-loop system will converge to an attracting invariant set are then presented. It is also shown that when the sampling period converges to zero, these conditions coincide with sufficient conditions for non-fragility of the stabilizing continuous-time PWA state feedback controller. The results are successfully applied to a helicopter example.     

采样数据系统最优诊断观测器设计

研究采样数据(sampled-data,SD)系统最优诊断观测器的直接设计方法.首先从传递函数角度分析一般离散时间系统诊断观测器的Luenberger条件,由此构造出SD诊断观测器,并推导出其混杂动态关系.然后将SD故障检测问题定义为一个特定的比值型优化问题,并应用互内外分解法和代数方法构制其最优诊断观测器,使得产生的离散时间残差对连续时间未知输入具有鲁棒性,但对故障却是敏感的.仿真结果验证了所提设计方法的有效性.     

Stability of sampled-data piecewise-affine systems under state feedback

This paper addresses stability of sampled-data piecewise-affine (PWA) systems consisting of a continuous-time plant and a discrete-time emulation of a continuous-time state feedback controller. The paper presents conditions under which the trajectories of the sampled-data closed-loop system will exponentially converge to a neighborhood of the origin. Moreover, the size of this neighborhood will be related to bounds on perturbation parameters related to the sampling procedure, in particular, related to the sampling period. Finally, it will be shown that when the sampling period converges to zero the performance of the stabilizing continuous-time PWA state feedback controller can be recovered by the emulated controller.     

2 optimal control for sampled-data systems

This paper considers an ₂ optimal control problem for sampled-data systems. After defining a new ₂ norm for sampled-data systems, we give a state space solution to the optimal controller synthesis problem. We show that the ₂ optimal control problem for a sampled-data system is equivalent to a standard ₂ optimal control problem for a related discrete-time system.     

Norm invariant discretization for sampled-data fault detection

In this paper, the problem of fault detection in sampled-data systems is studied. It is shown that norms of a sampled system are equal to the corresponding norms of a certain discrete time system. Based on this discretization, the sampled-data fault detection problem can be converted to an equivalent discrete-time problem. A framework that unifies the H₂ and H_∞ optimal residual generators in sampled-data systems is then proposed.     

On the 2-induced norm of a sampled-data system

Formulas are given for the norms of SG and GH: G is a linear continuous-time system, S an ideal sampler, and H a zero-order hold; the signal spaces are ₂(−∞, ∞) (continuous-time) and l₂(Z) (discrete-time). These formulas are then applied to problems of uniformly optimal control of sampled-data systems.     

Design of H 2 Controllers for Sampled-Data Systems with Input Time Delays

This paper presents a general framework based on lifting technique for sampled-data systems with input time delays. By analyzing the properties of operator-valued matrices of lifted systems with input time delays, an extended lifting technique is obtained. It is then shown that, with the proposed lifting technique, the complex behavior of the system can be illustrated by two simple lifted systems, which construct the extended lifted system. The extended lifted system has the same induced norm as that of the original system with an input time delay, since the proposed lifting technique is an isometric isomorphism. Through applying the proposed lifting technique to sampled-data systems with input time delays, the time-invariant discrete-time system with infinite-dimensional input and output spaces is obtained. The equivalent discrete-time system, which is derived from the extended lifted system, can satisfy the problem of H ₂ sampled-data control systems with input time delays. Simulation results are given to show that the proposed method can guarantee a more stable system response than the conventional H ₂ sampled-data controller for the sampled-data systems with the various input time delays.     

An efficient algorithm for optimal control of PWA systems with polyhedral performance indices

We present an algorithm for the computation of explicit optimal control laws for piecewise affine (PWA) systems with polyhedral performance indices. The algorithm is based on dynamic programming (DP) and represents an extension of ideas initially proposed in Kerrigan and Mayne [(2003). Optimal control of constrained, piecewise affine systems with bounded disturbances. In Proceedings of the 41st IEEE conference on decision and control, Las Vegas, Nevada, USA, December], and Baoti? et al. [(2003). A new algorithm for constrained finite time optimal control of hybrid systems with a linear performance index. In Proceedings of European control conference, Cambridge, UK, September]. Specifically, we show how to exploit the underlying geometric structure of the optimization problem in order to significantly improve the efficiency of the off-line computations. An extensive case study is provided, which clearly indicates that the algorithm proposed in this paper may be preferable to other schemes published in the literature.     

Sampled-data H ∞ control for networked control systems with digital control inputs

In this article, the problem of sampled-data H _∞ control for networked control systems (NCSs) with digital control inputs is considered, where the physical plant is modelled as a continuous-time one, and the control inputs are discrete-time signals. By exploiting a novel Lyapunov–Krasovskii functional, using the Leibniz–Newton formula and a free-weighting matrix method, sufficient conditions for sampled-data H _∞ performance analysis and H _∞ controller design for such systems are given. Since the obtained conditions of H _∞ controller design are not expressed strictly in term of linear matrix inequalities, the sampled-data H _∞ controller is solved using modified cone complementary linearisation algorithm. In addition, the new sampled-data stability criteria for the NCSs is proved to be less conservative than some existing results. Numerical examples demonstrate the effectiveness of the proposed methods.     

Inversion of sampled-data system approximates the continuous-time counterpart in a noncausal framework

Although correspondence between the poles of a continuous-time and sampled-data system with a piecewise constant input is simple and desirable from the stability viewpoint, the relationship between zeros is intricate. Inversion of a sampled-data system is mostly unstable irrespective of the stability of the continuous-time counterpart. This makes it difficult to apply inversion-based control techniques such as perfect tracking, transient response shaping or iterative learning control to sampled-data systems. Although recently developed noncausal inversion techniques help us to circumvent unboundedness of the inversion caused by unstable zeros, whether the inversion of sampled-data systems approximates the continuous-time counterpart or not as the sample period is shortened is still to be determined. This article gives a positive conclusion to this problem.     

Switching event-triggered control of switched systems with actuator saturation

This paper focuses on switching event-triggered controller design for switched continuous-time systems with actuator saturation. First, we revisit the switching event-triggered sampled-data mechanism (ETSDM) to adapt it to the state feedback control of switched systems with actuator saturation. Then, by thinking of the ETSDM as a switching between periodic sampling and continuous ETSDM, constructing a switching multiple Lyapunov functions to give the analysis and design, and adopting the sector conditions to deal with the saturation, the sufficient conditions and the initial region ensuring the exponential stability of the switched system are proposed. Furthermore, the corresponding solvable conditions for the switching event-triggered controller and the triggering parameter matrices are established. Finally, a circuit example is given to illustrate the validity of the proposed results.     

Event-driven optimization-based control of hybrid systems with integral continuous-time dynamics

In this paper we introduce a class of continuous-time hybrid dynamical systems called integral continuous-time hybrid automata (icHA) for which we propose an event-driven optimization-based control strategy. Events include both external actions applied to the system and changes of continuous dynamics (mode switches). The icHA formalism subsumes a number of hybrid dynamical systems with practical interest, e.g., linear hybrid automata. Different cost functions, including minimum-time and minimum-effort criteria, and constraints are examined in the event-driven optimal control formulation. This is translated into a finite-dimensional mixed-integer optimization problem, in which the event instants and the corresponding values of the control input are the optimization variables. As a consequence, the proposed approach has the advantage of automatically adjusting the attention of the controller to the frequency of event occurrence in the hybrid process. A receding horizon control scheme exploiting the event-based optimal control formulation is proposed as a feedback control strategy and proved to ensure either finite-time or asymptotic convergence of the closed-loop.     

Takagi-Sugeno模糊连续系统的模糊采样控制

研究了T-S模糊连续系统的模糊采样控制问题．利用广义系统的描述方法、Lyapunov-Krasovikii泛函以及线性矩阵不等式(LMI)方法,建立了LMIs形式的依赖于采样时间间隔的模糊采样镇定条件,同时给出了模糊采样控制律的设计方法．所设计的模糊采样控制律可以镇定T-S模糊系统．而且,当连续时间模糊控制律可以镇定T-S模糊系统时,对于足够小的采样时间间隔,带有同样增益矩阵的模糊采样控制律也可以镇定T-S模糊系统．最后,通过两个仿真实例说明了所给方法的有效性．     

A second-order maximum principle for discrete-time bilinear control systems with applications to discrete-time linear switched systems

A powerful approach for analyzing the stability of continuous-time switched systems is based on using optimal control theory to characterize the “most unstable” switching law. This reduces the problem of determining stability under arbitrary switching to analyzing stability for the specific “most unstable” switching law. For discrete-time switched systems, the variational approach received considerably less attention. This approach is based on using a first-order necessary optimality condition in the form of a maximum principle (MP), and typically this is not enough to completely characterize the “most unstable” switching law. In this paper, we provide a simple and self-contained derivation of a second-order necessary optimality condition for discrete-time bilinear control systems. This provides new information that cannot be derived using the first-order MP. We demonstrate several applications of this second-order MP to the stability analysis of discrete-time linear switched systems.     

Continuous-time deadbeat control for sampled-data systems

In this paper, the continuous-time deadbeat control problem for the sampled-data systems is considered. We derived the class of all controllers that achieve the continuous-time deadbeat control     

Asynchronous hybrid systems with jumps – analysis and synthesis methods

In this paper we show that the H_∞ synthesis problem for a class of linear systems with asynchronous jumps can be reduced to a purely discrete-time synthesis problem. The system class considered includes continuous-time systems with discrete jumps, or discontinuities, in the state. New techniques are developed for the analysis of asynchronous time-varying hybrid systems which allow a particularly simple treatment, and provide an elementary proof for the sampled-data H_∞ problem.     

基于混杂系统方法的一类采样数据系统鲁棒故障检测

针对具有连续时间过程噪声和离散时间测量噪声的采样数据系统, 提出了一种新的鲁棒故障检测直接设计方法. 首先利用具有有限跳变的线性系统作为残差产生器, 采样数据系统的鲁棒故障检测设计问题被描述成采样数据滤波问题, 然后给出有限跳变线性系统有界实引理的线性矩阵不等式(LMI)表达形式, 基于此, 推导出采样数据系统鲁棒故障检测滤波器的存在条件及设计参数, 并将所提方法推广到具有结构不确定性的采样数据系统上. 所设计的滤波器能够保证残差与故障之间误差最小, 并对过程噪声、测量噪声、结构不确定性等因素鲁棒. 最后, 通过数值仿真对所提方法的可行性进行了验证.