Correlative scanning electron and confocal microscopy imaging of labeled cells coated by indium‐tin‐oxide

Confocal microscopy imaging of cells allows to visualize the presence of specific antigens by using fluorescent tags or fluorescent proteins, with resolution of few hundreds of nanometers, providing their localization in a large field‐of‐view and the understanding of their cellular function. Conversely, in scanning electron microscopy (SEM), the surface morphology of cells is imaged down to nanometer scale using secondary electrons. Combining both imaging techniques have brought to the correlative light and electron microscopy, contributing to investigate the existing relationships between biological surface structures and functions. Furthermore, in SEM, backscattered electrons (BSE) can image local compositional differences, like those due to nanosized gold particles labeling cellular surface antigens. To perform SEM imaging of cells, they could be grown on conducting substrates, but obtaining images of limited quality. Alternatively, they could be rendered electrically conductive, coating them with a thin metal layer. However, when BSE are collected to detect gold‐labeled surface antigens, heavy metals cannot be used as coating material, as they would mask the BSE signal produced by the markers. Cell surface could be then coated with a thin layer of chromium, but this results in a loss of conductivity due to the fast chromium oxidation, if the samples come in contact with air. In order to overcome these major limitations, a thin layer of indium‐tin‐oxide was deposited by ion‐sputtering on gold‐decorated HeLa cells and neurons. Indium‐tin‐oxide was able to provide stable electrical conductivity and preservation of the BSE signal coming from the gold‐conjugated markers. Microsc. Res. Tech. 78:433–443, 2015. © 2015 Wiley Periodicals, Inc.     

Correlative fluorescence and electron microscopy in tissues: immunocytochemistry

Correlative microscopy is a collection of procedures that rely upon two or more imaging modalities to examine the same specimen. The imaging modalities employed should each provide unique information and the combined correlative data should be more information rich than that obtained by any of the imaging methods alone. Currently the most common form of correlative microscopy combines fluorescence and electron microscopy. While much of the correlative microscopy in the literature is derived from studies of model cell culture systems we have focused, primarily, on correlative microscopy in tissue samples. The use of tissue, particularly human tissue, may add constraints not encountered in cell culture systems. Ultrathin cryosections, typically used for immunoelectron microscopy, have served as the substrate for correlative fluorescence and electron microscopic immunolocalization in our studies. In this work, we have employed the bifunctional reporter FluoroNanogold. This labeling reagent contains both a fluorochrome and a gold-cluster compound and can be imaged by sequential fluorescence and electron microscopy. This approach permits the examination of exactly the same sub-cellular structures in both fluorescence and electron microscopy with a high level of spatial resolution.     

Correlative light and backscattered electron microscopy of bone--Part I: Specimen preparation methods

A method for preparing nondecalcified bone and tooth specimens for imaging by both light microscopy (LM) and backscattered electron microscopy in the scanning electron microscope (BSE-SEM) is presented. Bone blocks are embedded in a polymethylmethacrylate (PMMA) mixture and mounted on glass slides using components of a light-cured dental adhesive system. This method of slide preparation allows correlative studies to be carried out between different microscopy modes, using the same histologic section. It also represents a large time savings relative to other mounting methods whose media require long cure times.     

Backscattered electron SEM imaging of cells and determination of the information depth

Backscattered electron imaging of HT29 colon carcinoma cells in a scanning electron microscope was studied. Thin cell sections were placed on indium‐tin‐oxide‐coated glass slides, which is a promising substrate material for correlative light and electron microscopy. The ultrastructure of HT29 colon carcinoma cells was imaged without poststaining by exploiting the high chemical sensitivity of backscattered electrons. Optimum primary electron energies for backscattered electron imaging were determined which depend on the section thickness. Charging effects in the vicinity of the SiO₂ nanoparticles contained in cell sections could be clarified by placing cell sections on different substrates. Moreover, a method is presented for information depth determination of backscattered electrons which is based on the imaging of subsurface nanoparticles embedded by the cells.     

Correlative microscopy: a potent tool for the study of rare or unique cellular and tissue events

Biological studies have relied on two complementary microscope technologies – light (fluorescence) microscopy and electron microscopy. Light microscopy is used to study phenomena at a global scale to look for unique or rare events, and it also provides an opportunity for live imaging, whereas the forte of electron microscopy is the high resolution. Traditionally light and electron microscopy observations are carried out in different populations of cells/tissues and a 'correlative' inference is drawn. The advent of true correlative light-electron microscopy has allowed high-resolution imaging by electron microscopy of the same structure observed by light microscopy, and in advanced cases by video microscopy. Thus a rare event captured by low-resolution imaging of a population or transient events captured by live imaging can now also be studied at high resolution by electron microscopy. Here, the potential and difficulties of this approach, along with the most impressive breakthroughs obtained by these methods, are discussed.     

A fluorescence scanning electron microscope

Fluorescence techniques are widely used in biological research to examine molecular localization, while electron microscopy can provide unique ultrastructural information. To date, correlative images from both fluorescence and electron microscopy have been obtained separately using two different instruments, i.e. a fluorescence microscope (FM) and an electron microscope (EM). In the current study, a scanning electron microscope (SEM) (JEOL JXA8600 M) was combined with a fluorescence digital camera microscope unit and this hybrid instrument was named a fluorescence SEM (FL-SEM). In the labeling of FL-SEM samples, both Fluolid, which is an organic EL dye, and Alexa Fluor, were employed. We successfully demonstrated that the FL-SEM is a simple and practical tool for correlative fluorescence and electron microscopy.     

Monte Carlo simulation of secondary electron and backscattered electron images in scanning electron microscopy for specimen with complex geometric structure

A new Monte Carlo technique for the simulation of secondary electron (SE) and backscattered electron (BSE) of scanning electron microscopy (SEM) images for an inhomogeneous specimen with a complex geometric structure has been developed. The simulation is based on structure construction modeling with simple geometric structures, as well as on the ray-tracing technique for correction of electron flight-step-length sampling when an electron trajectory crosses the interface of the inhomogeneous structures. This correction is important for the simulation of nanoscale structures of a size comparable with or even less than the electron scattering mean free paths. The physical model for electron transport in solids combines the use of the Mott cross section for electron elastic scattering and a dielectric function approach for electron inelastic scattering, and the cascade SE production is also included.     

Secondary and backscattered electron imaging of weathered chromian spinel

Secondary (SE) and backscattered electron (BSE) imaging as well as x-ray microanalysis have demonstrated that the weathering of chromian spinel occurs as a progressive form of alteration. Numerous chemical discriminant analysis methods based on the composition of chromian spinel are used to locate valuable deposits of minerals. These methods will be misleading if the correct interpretation of the weathering of chromian spinel and the subsequent pattern of changes in its mineral chemistry are not properly assessed using scanning electron microscopy. This assessment is vital in understanding the geological processes involved and the economic potential of any indicated deposit. Minerals such as chromian spinel, pyrope garnet, and picroilmenite are considered to be highly resistant to weathering and abrasion and are therefore useful in the search for associated valuable deposits of diamond, nickel, platinum, and gold. Known as indicator minerals, they are usually present in relatively large concentrations compared with the target mineral (e.g., diamond) and form large and often subtle dispersion anomalies adjacent to the deposit. Chromian spinel has long been regarded as a stable indicator mineral; however, detailed SE and BSE imaging indicates that many of the chromian spinels that are routinely examined using scanning electron microscopes (SEM) and microprobes are extensively altered. Secondary electron and BSE imaging of weathered chromian spinel in a normal SEM provides valuable data on the form and chemical style of the alteration. Secondary electron imaging of weathered chromian spinel in the environmental SEM (ESEM) not only enhances the difference in atomic number between unaltered and altered areas but also allows high-resolution imaging of these very fine replacement textures.     

Preservation of protein fluorescence in embedded human dendritic cells for targeted 3D light and electron microscopy

In this study, we present a correlative microscopy workflow to combine detailed 3D fluorescence light microscopy data with ultrastructural information gained by 3D focused ion beam assisted scanning electron microscopy. The workflow is based on an optimized high pressure freezing/freeze substitution protocol that preserves good ultrastructural detail along with retaining the fluorescence signal in the resin embedded specimens. Consequently, cellular structures of interest can readily be identified and imaged by state of the art 3D confocal fluorescence microscopy and are precisely referenced with respect to an imprinted coordinate system on the surface of the resin block. This allows precise guidance of the focused ion beam assisted scanning electron microscopy and limits the volume to be imaged to the structure of interest. This, in turn, minimizes the total acquisition time necessary to conduct the time consuming ultrastructural scanning electron microscope imaging while eliminating the risk to miss parts of the target structure. We illustrate the value of this workflow for targeting virus compartments, which are formed in HIV‐pulsed mature human dendritic cells.     

Gridded Aclar: preparation methods and use for correlative light and electron microscopy of cell monolayers,by TEM and FIB–SEM

Aclar, a copolymer film with properties very similar to those of tissue culture plastic, is a versatile substrate to grow cells for light (including fluorescence) and electron microscopic applications in combination with both chemical fixation and cryoimmobilization. In this paper, we describe complete procedures to perform correlative light and electron microscopy using Aclar as substrate for the culture of cell monolayers to be finally embedded in plastic. First, we developed straightforward, efficient and flexible ways to mark the surface of the Aclar to create substrates to locate cells first at the light microscopy and then the electron microscopy level. All the methods enable the user to self‐design gridded Aclar pieces, according to the purpose of the experiments, and create a large number of substrates in a short time. Second, we confirmed that marked Aclar supports the normal growth and morphology of cells. Third, we validated the correlative light and electron microscopy procedure using Aclar. This validation was done for the high‐resolution analysis of endothelial cells using transmission electron microscopy and focused ion beam–scanning electron microscopy in combination with the use of fluorescence, phase contrast and/or bright field microscopy to map areas of interest at low resolution. The methods that we present are diverse, easy to implement and highly reproducible, and emphasize the versatility of Aclar as a cell growth substrate for diverse microscopic applications.     

Correlative high-resolution morphologic analysis of the three-dimensional organization of human chromosomes

A correlative morphologic analysis was carried out on isolated metaphase chromosomes by means of field emission in-lens scanning electron microscopy (FEISEM) and atomic force microscopy (AFM). Whereas FEISEM provides ultra-high resolution power and allows the surface analysis of biological structures free of any conductive coating, the AFM allows imaging of biological specimens in ambient as well as in physiologic conditions. The analysis of the same samples was made possible by the use of electrical conductive and light transparent ITO glass as specimen holder. Further preparation of the specimen specific for the instrumentation was not required. Both techniques show a high correlation of the respective morphologic information, improving their reciprocal biological significance. In particular, the biological coat represents a barrier for surface morphologic analysis of chromosome spreads and it is sensitive to protease treatment. The chemical removal of this layer permits high-resolution imaging of the chromatid fibers but at the same time alters the chromosomal dimension after rehydration. The high-resolution level, necessary to obtain a precise physical mapping of the genome that the new instruments such as FEISEM and AFM could offer, requires homogeneously cleaned samples with a high grade of reproducibility. A correlative microscopical approach that utilizes completely different physical probes provides complementary useful information for the understanding of the biological, chemical, and physical characteristics of the samples and can be applied to optimize the chromosome preparations for further improvement of the knowledge about spatial genome organization.     

A novel approach for correlative light electron microscopy analysis

Correlative light and electron microscopy (CLEM) is a multimodal technique of increasing utilization in functional, biochemical, and molecular biology. CLEM attempts to combine multidimensional information from the complementary fluorescence light microscopy (FLM) and electron microscopy (EM) techniques to bridge the various resolution gaps. Within this approach the very same cell/structure/event observed at level can be analyzed as well by FLM and EM. Unfortunately, these studies turned out to be extremely time consuming and are not suitable for statistical relevant data. Here, we describe a new CLEM method based on a robust specimen preparation protocol, optimized for cryosections (Tokuyasu method) and on an innovative image processing toolbox for a novel type of multimodal analysis. Main advantages obtained using the proposed CLEM method are: (1) hundred times more cells/structures/events that can be correlated in each single microscopy session; (2) three‐dimensional correlation between FLM and EM, obtained by means of ribbons of serial cryosections and electron tomography microscopy (ETM); (3) high rate of success for each CLEM experiment, obtained implementing protection of samples from physical damage and from loss of fluorescence; (4) compatibility with the classical immunogold and immunofluorescence labeling techniques. This method has been successfully validated for the correlative analysis of Russel Bodies subcellular compartments. Microsc. Res. Tech., 2010. © 2009 Wiley‐Liss, Inc.     

Utilization of integrated correlative light and electron microscopy (iCLEM) for imaging sedimentary organic matter

We report here a new microscopic technique for imaging and identifying sedimentary organic matter in geologic materials that combines inverted fluorescence microscopy with scanning electron microscopy and allows for sequential imaging of the same region of interest without transferring the sample between instruments. This integrated correlative light and electron microscopy technique is demonstrated with observations from an immature lacustrine oil shale from the Eocene Green River Mahogany Zone and mid‐oil window paralic shale from the Upper Cretaceous Tuscaloosa Group. This technique has the potential to allow for identification and characterization of organic matter in shale hydrocarbon reservoirs that is not possible using either light or electron microscopy alone, and may be applied to understanding the organic matter type and thermal regime in which organic nanoporosity forms, thereby reducing uncertainty in the estimation of undiscovered hydrocarbon resources.     

Pushing the resolution limits in cryo electron tomography of biological structures

Cryo electron tomography is a three-dimensional imaging technique that is suitable for imaging snapshots of the structural arrangements of biomolecular complexes and macromolecules, both in vitro and in the context of the cell. In terms of attainable resolution, cryo electron tomographic reconstructions now show resolvable details in the 5-10 nm range, connecting optical microscopy with molecular imaging techniques. In view of the current developments in super-resolution light microscopy and correlative light and electron microscopy, cryo electron tomography will be increasingly important in structural biology as a tool to bridge light microscopy with molecular imaging techniques like NMR, X-ray diffraction and single particle electron microscopy. In cell biology, one goal, often referred to as visual proteomics, is the molecular mapping of whole cells. To achieve this goal and link cryo electron tomography to these high-resolution techniques, increasing the attainable resolution to 2-5 nm is vital. Here, we provide an overview of technical factors that limit the resolution in cryo electron tomography and discuss how during data acquisition and image processing these can be optimized to attain the highest possible resolution. Also, existing resolution measurement approaches and current technological developments that potentially increase the resolution in cryo electron tomography are discussed.     

Identification and study of the same cell in monolayer culture by different methods of light microscopy,scanning, and transmission electron microscopy. Application for cryodamaged cells examination

Cells were cultivated on transparent conductive substrates, glass slides coated with indium oxide; individual cells were marked with a diamond indentor. Cell cultures were frozen (–15°C), thawed, and then stained with fluorescent dyes to determine cell damage. The marked cells were examined by phase contrast, fluorescence, and Nomarski DIC microscopy. After aldehyde and osmium tetroxide fixation, the cell preparations were sequentially treated with tannic acid, uranyl acetate, and lead citrate. The same marked cell could be sequentially studied by light microscopy (LM; in water immersion conditions), scanning electron microscopy (SEM; after dehydration and critical point drying), and transmission electron microscopy (TEM; after embedding of cell samples in epoxy resin and laser marking of the cell previously marked with a diamond indentor). The method used ensures good preservation of cell morphology, cell surface relief, and intracellular structures. The treatment used renders the cells conductive and permitted SEM of uncoated culture cells on conductive substrates.     

Capsule-supporting ring: a new device for resin embedding of glass-mounted specimens

The goal of specimen preparation for transmission electron microscopy is to obtain high-quality ultra-thin sections with which we can correlate cellular structure to physiological function. In this study, we newly developed a capsule-supporting ring that can be useful for resin embedding of glass-mounted specimens. The present device allowed us to re-embed a semi-thin section on a microscope slide into a resin block not only for efficient ultra-thin sectioning but also for a correlative light and electron microscopy. Similar to epoxy resins for morphological observations, semi-thin sections of low-viscosity hydrophilic resins, such as Lowicryl series, can be re-embedded into the resin, which can be useful for cytochemical gold labelling. A further application of the present device improved flat embedding of cultured cells on glass cover slips for electron microscopy, preserving in situ sub-cellular structures close to their native state. We practically describe the use of capsule-supporting ring and demonstrate representative micrographs as results.     

A technique for comparative light and scanning electron microscopy of the same deparaffinized microtomed section*

Evaluation of various types of clear plastic support material for light and scanning electron microscopy of the same section was conducted. GelBond was found to be the most satisfactory among seven different types of plastic materials tested. It offers all of the advantages of glass slides for light microscopy while being thin and flexible enough to cut and sputter coat for SEM.     

Integration of a high‐NA light microscope in a scanning electron microscope

We present an integrated light‐electron microscope in which an inverted high‐NA objective lens is positioned inside a scanning electron microscope (SEM). The SEM objective lens and the light objective lens have a common axis and focal plane, allowing high‐resolution optical microscopy and scanning electron microscopy on the same area of a sample simultaneously. Components for light illumination and detection can be mounted outside the vacuum, enabling flexibility in the construction of the light microscope. The light objective lens can be positioned underneath the SEM objective lens during operation for sub‐10 μm alignment of the fields of view of the light and electron microscopes. We demonstrate in situ epifluorescence microscopy in the SEM with a numerical aperture of 1.4 using vacuum‐compatible immersion oil. For a 40‐nm‐diameter fluorescent polymer nanoparticle, an intensity profile with a FWHM of 380 nm is measured whereas the SEM performance is uncompromised. The integrated instrument may offer new possibilities for correlative light and electron microscopy in the life sciences as well as in physics and chemistry.     

Correlation of two‐photon in vivo imaging and FIB/SEM microscopy

Advances in the understanding of brain functions are closely linked to the technical developments in microscopy. In this study, we describe a correlative microscopy technique that offers a possibility of combining two‐photon in vivo imaging with focus ion beam/scanning electron microscope (FIB/SEM) techniques. Long‐term two‐photon in vivo imaging allows the visualization of functional interactions within the brain of a living organism over the time, and therefore, is emerging as a new tool for studying the dynamics of neurodegenerative diseases, such as Alzheimer's disease. However, light microscopy has important limitations in revealing alterations occurring at the synaptic level and when this is required, electron microscopy is mandatory. FIB/SEM microscopy is a novel tool for three‐dimensional high‐resolution reconstructions, since it acquires automated serial images at ultrastructural level. Using FIB/SEM imaging, we observed, at 10 nm isotropic resolution, the same dendrites that were imaged in vivo over 9 days. Thus, we analyzed their ultrastructure and monitored the dynamics of the neuropil around them. We found that stable spines (present during the 9 days of imaging) formed typical asymmetric contacts with axons, whereas transient spines (present only during one day of imaging) did not form a synaptic contact. Our data suggest that the morphological classification that was assigned to a dendritic spine according to the in vivo images did not fit with its ultrastructural morphology. The correlative technique described herein is likely to open opportunities for unravelling the earlier unrecognized complexity of the nervous system.