Effect of excimer laser surface melting on the microstructure and corrosion performance of the die cast AZ91D magnesium alloy

Excimer laser surface melting (LSM) of the die cast AZ91D alloy has been investigated in terms of microstructure and corrosion behaviour. Excimer LSM of the alloy resulted in a highly homogeneous and refined melted microstructure, which improved the corrosion resistance of the alloy. The latter was associated with the large dissolution of intermetallic phases and the enrichment of aluminium within the melted layer. An increased number of laser pulses resulted in thicker melted layers, but also in enhanced porosity and the formation of micro-cracks at the overlapping area. Both factors diminished the corrosion resistance of the laser-treated alloy.     

Corrosion of heat treated magnesium alloy ZE41

This paper investigates the effect of heat treatment upon the corrosion morphology and mechanism of ZE41 alloy. The results of optical and scanning electron microscopy (SEM) together with potentiodynamic polarisation reveal the importance of the microstructure in the initiation and propagation of corrosion in an aqueous environment. The corrosion of the heat-treated alloy is significantly altered due to changes in the microstructure, specifically the Zr-rich regions and the grain boundary T-phase.     

Effect of tin modification on corrosion of AM70 magnesium alloy

In this study, AM70 magnesium alloys with and without 2 wt.% Sn addition are compared for their corrosion performance. They are found to have similar corrosion rates in the first 70 h in 5 wt.% NaCl solution, but in extended immersion test the Sn modified AM70 exhibits accelerated overall corrosion. Nevertheless, Sn modification significantly decreases the susceptibility of the alloy to localized corrosion attack. Polarization curve measurements further indicate that the Sn modified AM70 is likely to have worse galvanic corrosion than AM70 in terms of the loss of metal, but again the Sn modification makes the galvanic corrosion less localized, which is an improvement aspect of the galvanic corrosion performance. The effect of Sn addition on the corrosion behavior appears to be associated with the presence of Sn-containing particles and the solute Sn in the matrix phase, which may change the electrochemical anodic and cathodic polarization behavior of the alloy.     

Plasma anodized ZE41 magnesium alloy sealed with hybrid epoxy-silane coating

Anodic coatings on magnesium ZE41 alloy were formed by DC plasma electrolytic oxidation (PEO) in spark regime in solution composed of NaOH, Na₂SiO₃ and KF. The positive effect of poly(ethylene oxide) addition into the anodizing electrolyte on PEO process, anodic film porosity and its protective performance was described. Anodic films were sealed with hybrid epoxy-silane formulation. The corrosion behavior of the coated ZE41 was studied through electrochemical impedance spectroscopy (EIS) in 0.6 M NaCl solution. Resulting duplex PEO/epoxy-silane coating provides good protective performance without significant signs of corrosion during 1 month of immersion test.     

Local and global electrochemical impedances applied to the corrosion behaviour of an AZ91 magnesium alloy

The electrochemical behaviour of an AZ91 magnesium alloy was investigated in a low aggressive medium by means of local and global electrochemical impedance measurements. The results were compared to those obtained on a pure magnesium sample. It was possible to show the individual contribution of each phase constituting the alloy, and it was observed that the corrosion mechanism of the two phases was the same, controlled by the Mg dissolution. However, local impedance diagrams clearly indicated that the kinetics dissolution of the β-phase was slower than that of the α-phase, which was in good agreement with SEM observations.     

Effect of grain size and twins on corrosion behaviour of AZ31B magnesium alloy

Grain refining is a promising approach to improve mechanical properties of magnesium alloys, but how grain size and twins affect corrosion behaviour is not well understood. In this work, corrosion resistance of AZ31B alloy with different grain sizes is studied in 3.5% NaCl solution using immersion testing, evolved hydrogen gas measurement and potentiodynamic polarisation measurement. Intra-granular corrosion was predominant and the existence of twins further accelerated the corrosion. The effect of grain size was more pronounced in the corrosion of the untwinned microstructure. The corrosion rate significantly increased as the average grain size increased from 65 to 250 μm.     

Effect of antimony, bismuth and calcium addition on corrosion and electrochemical behaviour of AZ91 magnesium alloy

This study investigated the effect of antimony, bismuth and calcium addition on the corrosion and electrochemical behaviour of AZ91 magnesium alloy in 3.5% NaCl solution. Techniques including constant immersion, electrochemical potentiodynamic polarisation, scanning electron microscopy (SEM), energy dispersed spectroscopy (EDS) and X-ray diffraction (XRD) were used to characterise electrochemical and corrosion properties and surface topography. It was found that corrosion attack occurred preferentially on Mg₃Bi₂ and Mg₃Sb₂ particles while Mg₁₇Al₈Ca_0.5 and Mg₂Ca phases showed no detrimental effect on corrosion. Combined addition of small amounts of bismuth and antimony to the AZ91 alloy resulted in significant increase in corrosion rate.     

Comparison of electrochemical corrosion behaviour of MgO and ZrO2 coatings on AM50 magnesium alloy formed by plasma electrolytic oxidation

Two types of PEO coatings were produced on AM50 magnesium alloy using pulsed DC plasma electrolytic oxidation process in an alkaline phosphate and acidic fluozirconate electrolytes, respectively. The phase composition and microstructure of these PEO coatings were analyzed by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The corrosion behaviour of the coated samples was evaluated by open circuit potential (OCP) measurements, potentiodynamic polarization tests, and electrochemical impedance spectroscopy (EIS) in neutral 0.1 M NaCl solution. The results showed that PEO coating prepared from alkaline phosphate electrolyte consisted of only MgO and on the other hand the one formed in acidic fluozirconate solution was mainly composed of ZrO₂, MgF₂. Electrochemical corrosion tests indicated that the phase composition of PEO coating has a significant effect on the deterioration process of coated magnesium alloy in this corrosive environment. The PEO coating that was composed of only MgO suffered from localized corrosion in the 50 h exposure studies, whereas the PEO coating with ZrO₂ compounds showed a much superior stability during the corrosion tests and provided an efficient corrosion protection. The results showed that the preparation of PEO coating with higher chemical stability compounds offers an opportunity to produce layers that could provide better corrosion protection to magnesium alloys.     

Relationship between microstructure and corrosion performance of AA2050-T8 aluminium alloy after excimer laser surface melting

Surface modification by excimer laser surface melting (LSM) has been performed with the aim to improve the corrosion resistance of the AA2050-T8 alloy. LSM produced melted surfaces, largely free of precipitates, with both microstructure and corrosion behaviour depending upon the number of laser pulses employed. Increased number of laser pulses resulted in thicker melted layers, but also in greater trapped porosity and formation of micro-cracks at the overlapping area. Nevertheless, the LSM-treated specimens exhibited enhanced corrosion resistance compared to the untreated alloy, which was associated with the formation of a relatively uniform melted layer and a diminished presence of precipitates.     

The influence of zirconium additions on the corrosion of magnesium

Sixteen custom binary Mg–Zr alloys and four commercial Zr-containing Mg-alloys were used to investigate the role of Zr on the corrosion of Mg. Mg–Zr alloys were manufactured with a range of different Zr concentrations. It was observed that the Mg–Zr alloys with a smaller mean Zr particle size had more Zr dissolved in solid solution. Both the Zr in solid solution and in metallic particle form were observed to have a deleterious effect on the corrosion rate of Mg. However, this deleterious effect is less pronounced to effect in alloys with multiple alloying additions.     

Corrosion behaviour of thermally sprayed Al and Al/SiCp composite coatings on ZE41 magnesium alloy in chloride medium

Thermally sprayed Al and Al/SiCp composite coatings have been deposited on ZE41 magnesium alloy and mechanical compaction at room temperature was applied to the Al and Al/SiCp coatings to reduce their porosity. Corrosion behaviour of coated samples was evaluated and compared to that of uncoated substrate in 3.5 wt.% NaCl solution using electrochemical measurements. Al and Al/SiCp composite coatings reduced the corrosion current density of Mg-Zn alloys by three and two orders of magnitude, respectively, and reductions up to four orders of magnitude were obtained after mechanical compaction.     

Corrosion of magnesium alloy ZE41 - The role of microstructural features

Magnesium alloy ZE41, used extensively in the aerospace industry, possesses excellent mechanical properties albeit poor corrosion resistance. This paper investigates the mechanism of corrosion and the interaction between the grain boundary intermetallic phases, the Zr-rich regions within the grains and the bulk Mg-rich matrix. The results of optical and scanning electron microscopy (SEM) together with energy-dispersive X-ray (EDX) and atomic force microscopy (AFM) potential map measurements have shown the importance of the microstructure in the initiation and propagation of corrosion in an aqueous environment, indicating that the Zr-rich regions play a distinct role in the early stages of corrosion in this alloy.     

Effect of heat treatment on corrosion behaviour of magnesium alloy AZ91D in simulated body fluid

The research explored ways of improving corrosion behaviour of AZ91D magnesium alloy through heat treatment for degradable biocompatible implant application. Corrosion resistance of heat-treated samples is studied in simulated body fluid at 37 °C using immersion and electrochemical testing. Heat treatment significantly affected microgalvanic corrosion behaviour between cathodic β-Mg₁₇Al₁₂ phase and anodic α-Mg matrix. In T4 microstructure, dissolution of the β-Mg₁₇Al₁₂ phase decreased the cathode-to-anode area ratio, leading to accelerated corrosion of α-Mg matrix. Fine β-Mg₁₇Al₁₂ precipitates in T6 microstructure facilitated intergranular corrosion and pitting, but the rate of corrosion was less than those of as-cast and T4 microstructures.     

Corrosion of hot extrusion AZ91 magnesium alloy: I-relation between the microstructure and corrosion behavior

The effect of hot extrusion on the corrosion behavior of AZ91 magnesiun alloy was investigated by weight loss, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization measurements. The results showed that the extruded alloy had lower corrosion resistance compared to cast alloy. This observation has been explained from point of view of microstructure changes, wherein the increased density of dislocation, twins and grain boundary increased the anodic dissolution of AZ91 alloy and rearrangement of β phase accelerated the rate of both the anodic and cathodic process.     

Effect of second phases on the corrosion behaviour of wrought Mg-Zn-Y-Zr alloy

The corrosion behaviour of wrought Mg-Zn-Y-Zr alloy was investigated by corrosion morphology observation and electrochemical measurement. The results indicate that the corrosion process can be divided into three stages, corresponding to three types of corrosion features. At the initial stage, corrosion occurred surrounding the second phases, which was driven by galvanic couple effect; at the middle stage, filiform corrosion was found in the central regions of α Mg matrix; at the final stage, pitting corrosion presented around the second phases. The second phases have a great effect on the corrosion process of Mg-Zn-Y-Zr alloy.     

Microstructure and corrosion resistance of magnesium alloy ZE41 with laser surface cladding by Al-Si powder

The microstructure and corrosion behavior of commercial alloy ZE41 modified by surface laser cladding with Al-Si powder mixture was studied by SEM, TEM, X-ray diffraction and electrochemical methods. The coating is composed of an Al-Mg matrix and dendrite precipitates of Mg₂Si. In function of the laser speed, the matrix is formed by a Mg solid solution in Al or by the intermetallic phase Mg₁₇Al₁₂. The presence of different matrixes is responsible for galvanic corrosion and decrease of corrosion resistance in interfacial area between coats. Isolated samples of the bulk coatings material showed similar corrosion potentials inspite of different matrix composition. This interpreted in terms of a mechanism involving two steps: (1) an initial dissolution of anodic Mg₂Si particles followed by (2) pitting in the formed crevices. The proposed mechanism corresponds well with the experimental observations and the mechanisms of localized corrosion observed for aluminium alloys in the chloride media described in the literature. Improved corrosion resistance can be achieved by the microstructure homogenization through the optimization of laser parameters and/or following heat treatment.     

The influence of the microstructure on the atmospheric corrosion behaviour of magnesium alloys AZ91D and AM50

Even though magnesium, as a structure metal, is most commonly used in an atmospheric environment, most investigations of magnesium are performed in solution. In the present work the atmospheric corrosion of two commonly used magnesium alloys, AZ91D and AM50, has been investigated from the initial stages up to the most severe forms of corrosion. A detailed investigation of the morphology of a corrosion attack and its development over time shows that the atmospheric corrosion mechanism is similar for the two alloys. Based on these findings a schematic model of the initial atmospheric corrosion attack on AZ91D is presented and discussed.     

The influence of carbon nanotubes on the corrosion behaviour of AZ31B magnesium alloy

Carbon nanotubes (CNTs) are an effective reinforcement for magnesium (Mg) and its alloys due to their excellent mechanical properties. However, due to their quite different electrical properties compared to other carbon allotropes, the influence of CNTs on the corrosion of Mg is expected to be different. For this reason, the corrosion of AZ31B Mg alloy based composite with CNTs (AZ31B/CNT composite) was investigated with immersion tests, polarization tests and surface potential measurements. The galvanic corrosion between the Mg matrix and CNTs played an important role in the corrosion behaviour of the AZ31B/CNT composite.     

Characterization and corrosion studies of ceria thin film based on fluorinated AZ91D magnesium alloy

The CeO₂ thin film was prepared via sol-gel method on fluorinated AZ91D magnesium alloy surfaces. The surface morphology, composition and the corrosion resistance of the film were investigated in details using scanning electron microscope, X-ray photoelectron spectroscopy and electrochemical impedance spectroscopy as well as potentiodynamic polarization tests. It was found that small amount of MgO and MgF₂ were encapsulated in CeO₂ thin film. The electrochemical measurement results demonstrated that the CeO₂ thin film on fluorinated AZ91D magnesium alloy could improve the corrosion resistance approximately by two orders of magnitude compared with that of the bare substrate.     

An investigation on corrosion behaviour of pressure infiltrated Al-Mg alloy/SiCp composites

In this study, effect of Mg alloying addition (2-8 wt.%) on corrosion behaviour of Al matrix composites, in 3.5 wt.% NaCl environment, has been investigated. Composites were produced by pressure infiltration technique at 750 °C and had a SiC particle (SiC_p) volume fraction of ∼60%. Results were evaluated by using potentiodynamic polarisation measurements, immersion tests, SEM, EDS and XRD analysis. Compared to the pure Al matrix, mass loss of the composites decreased with increasing Mg content. Experimental results revealed that intermetallics as a result of reaction between Al-Mg alloy and SiC particle has beneficial effect on corrosion resistance of the composites due to interruption of the continuity of the matrix channels within the pressure infiltrated composites.