The rheological properties of vinyl chloride–vinyl acetate copolymers

Copolymers of vinyl chloride–vinyl acetate have been prepared with different vinyl acetate contents and molecular weights and under different polymerization conditions. A rheological study of these copolymers indicates that they behave in some ways like externally plasticized PVC. For instance, as the vinyl acetate content increases, the melt viscosity decreases, the flow activation energy decreases, and the copolymer becomes more Newtonian. However, the critical shear rate for melt fracture increases, resembling the addition of elastic polymers to PVC. An increase in copolymer molecular weight has a similar effect on the rheological behavior as in PVC, except that the flow activation energy is observed to increase rather than decrease. Decreasing the polymerization temperature affects the flow properties of the copolymer, probably due to changes in degree of branching and crystallinity. A copolymer made by the delayed addition of vinyl chloride, having a more random structure than one made by the conventional batch method, exhibited quite different flow behavior. It had a lower melt viscosity, higher critical shear rate, and lower flow activation energy.     

Synthesis of vinyl phenyl acetate and an evaluation of vinyl chloride/vinyl phenyl acetate copolymers

The synthesis of vinyl phenyl acetate, by an ester interchange reaction between phenyl acetic acid and vinyl acetate and utilizing a catalyst, is described. Copolymerization with vinyl chloride, in a suspension system and using a peroxide catalyst, is described on a laboratory and pilot plant scale. Monomer/copolymer compositions, for an initial charge consisting of vinyl chloride/vinyl phenyl acetate (80/20 by weight) are presented over a range of conversions, as an indication of reactivity ratios. Discs, molded from unstabilized copolymers, show very good clarity and color stability, which improve with increased comonomer loading. Some retention of unpolymerized vinyl phenyl acetate monomer occurred, and some increase in softening points resulted following two reprecipitations from acetone into excess methanol. Compound from a 96/4 vinyl chloride/vinyl phenyl acetate copolymer has better color stability than does an equivalent vinyl chloride/vinylidene chloride copolymer compound. The enhanced color and heat stability of the copolymers is attributed to the aromatic character of the comonomer vinyl phenyl acetate.     

Polyblends of poly(vinyl chloride) with ethylene/vinyl acetate copolymers: Practical properties and morphology

Five to 15 percent of ethylene/vinyl acetate copolymers was compounded into rigid polyvinyl chloride, with the copolymers dispersed as discrete micro-domains, produced very efficient synergistic improvement of impact strength; as the vinyl acetate content of the copolymer increased from 28 to 60 percent, the synergistic peak moved to higher copolymer content and became higher and broader. Copolymer content correlated directly with melt flow and thermal stability, and inversely to modulus, strength, and heat-deflection temperature. The vinyl acetate content of the copolymer correlated directly with elongation, impact strength, and thermal stability, but inversely to modulus, heat-deflection temperature, low-temperature flexibility, and melt flow. When the copolymer content reached 25 percent, it formed a second continuous-phase, interpenetrating the polymer network structure and acting as a polymeric plasticizer, producing thermoplastic elastoplastics.     

Compatibility of Poly(vinyl chloride–vinyl acetate)/Polyester-based Polyurethane Blends

The compatibility of poly(vinyl chloride–vinyl acetate) copolymer (P(VC-VA)) with thermoplastic polyurethane elastomers (TPU) was studied using Fourier transform infrared spectroscopy, optical microscopy and solubility parameters. The Gibbs free energy of mixing for the polymer–solvent system was calculated. The mechanical studies show that decrease in the P(VC-VA)/TPU ratio decreases the tensile strength. © 1997 SCI     

Preparation and characterization of colloidal dispersions of vinyl alcohol–vinyl acetate copolymers: application as stabilizers for vinyl chloride suspension polymerization

Well‐defined colloidal dispersions of vinyl alcohol–vinyl acetate copolymers (PVAs) with different degrees of hydrolysis (DH) were prepared by a coacervation technique. Colloidal particles in the size range 150–250 nm, with an acetate‐rich core and a hydrophilic PVA corona, were obtained using a combination of a hydrophobic PVA (PVA II) having an average DH ( ) value of 43 mol% with a ‘blocky’ hydrophilic PVA (PVA I) with a value of 72 mol%. The core–shell structure of these particles was demonstrated using ¹H NMR and using fluorescence‐labelled PVA I. The stabilization efficiency of PVA I and PVA II and their combination was examined for 1‐chlorobutane–water emulsions, as a ‘model solvent’ for vinyl chloride–water emulsions. Preliminary tests of vinyl chloride suspension polymerization confirmed the beneficial effect of PVA I and PVA II combinations as stabilizers on the granulometry and the porosity specifications of the poly(vinyl chloride) grains. Copyright © 2006 Society of Chemical Industry     

Physical properties of some vinyl tetrahydroabietate and vinyl maleopimarate acid anhydride copolymers

The stress–strain and torsional characteristics of some experimental copolymers of vinyl tetrahydroabietate and vinyl maleopimarate acid anhydride with vinyl chloride and vinyl acetate have been determined. Similar studies were also undertaken on peroxide-cured compositions of a vinyl chloride-vinyl tetrahydroabietate copolymer. Elastie moduli for the uncured copolymers range from 80,200 to 338,000 psi. Cured compositions of vinyl chloride–vinyl tetrahydroabietate copolymer exhibited both lower and higher moduli than that of the uncured copolymer. Some of the cured compositions appear to have an improved impact resistance over that of the uncured polymers.     

Poly(vinyl chloroformate) and derivatives: 2. Copolymerization of vinyl chloroformate and of phenyl vinyl carbonate with vinyl monomers

Vinyl chloroformate and phenyl vinyl carbonate have been copolymerized with vinyl acetate in methylene chloride at 35°C, using dicyclohexylperoxydicarbonate as initiator. The copolymerization parameters obtained show that vinyl chloroformate and vinyl acetate have nearly the same reactivity whereas phenyl vinyl carbonate is slightly less reactive than vinyl acetate.     

Gel permeation chromatography in the study of the molecular weight distribution vinyl chloride–vinyl acetate copolymer. III. Influence of the incompatibility of polymers and some problems of interpretation of experimental data

The influence of incompatibility in the ternary systems gel–polymer–solvent and polymer–polymer–solvent on the results of gel permeation chromatography of the copolymer vinyl chloride–vinyl acetate was investigated. The measurements were performed on styrene–divinylbenzene gels and on porous silica gels. Detection in GPC was made using a differential refractometer together with a UV detector, which permitted evaluation of the extent of interactions of the polymer components in the mixture. Some aspects of the GPC data are discussed for the application of universal calibration, the validity of which for the copolymer vinyl chloride–vinyl acetate has been proved.     

Effects of poly(vinyl acetate) and poly(vinyl chloride‐ co‐vinyl acetate) low‐profile additives on properties of cured unsaturated polyester resins. I. Volume shrinkage characteristics and internal pigmentability

Three series of self‐synthesized poly(vinyl acetate)‐based low‐profile additives (LPAs) with different chemical structures and molecular weights, including poly(vinyl acetate), poly(vinyl chloride‐co‐vinyl acetate), and poly(vinyl chloride‐co‐vinyl acetate‐co‐maleic anhydride), were studied. Their effects on the volume shrinkage characteristics and internal pigmentability for low‐shrink unsaturated polyester (UP) resins during cure were investigated. The experimental results were examined with an integrated approach involving measurements of the static phase characteristics of the ternary styrene/UP/LPA system, the reaction kinetics, the cured sample morphology, and microvoid formation by using differential scanning calorimetry, scanning electron microscopy, optical microscopy, and image analysis. Based on the Takayanagi mechanical model, factors leading to both good volume shrinkage control and acceptable internal pigmentability for the molded parts were explored. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3336–3346, 2003     

Transesterification and crosslinking of poly(vinyl chloride‐co‐vinyl acetate) copolymers in the melt

A new method to obtain hydroxylated poly(vinyl chloride) (PVC‐OH) and its crosslinking in the melt are studied. Starting from a vinyl chloride‐co‐vinyl acetate copolymer, a transesterification reaction in the presence of an alcohol during the processing of plasticized polymer is investigated as a function of the processing temperature and alcohol nature (1‐butanol or 1‐octanol). Reaction evolution is followed by ¹H‐NMR and IR spectroscopies. The best results are obtained for 1‐octanol, and they show the absence of secondary reactions and the progressive appearance of OH groups in the polymer as acetate groups disappear. On the other hand, crosslinking of the thus‐obtained PVC‐OH with hexamethylene diisocyanate (HMDI) during the processing is also studied. The gel content and the mechanical properties at 140°C are studied as a function of three crosslinking variables: number of OH groups present in the polymer, concentration of HMDI added to the polymer, and time of crosslinking. The results show that by optimizing those parameters it is possible to obtain gel contents up to 100% and an increase of 600% in the Young's modulus and 1300% in the ultimate tensile strength with respect to the plasticized PVC. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 621–630, 1999     

Terpolymers. II. Mechanical properties and transition temperatures of terpolymers of vinyl stearate,vinyl acetate,and vinyl chloride

Vinyl stearate was studied as a major internal plasticizer in terpolymers containing vinyl acetate and vinyl chloride. The terpolymers were prepared by systematically replacing vinyl acetate by close increments of vinyl stearate starting with combinations of vinyl acetate and vinyl chloride, in increments, over all compositions. For comparison of properties, a complete range of copolymers of vinyl stearate and vinyl chloride, as well as mixtures of poly(vinyl chloride) and di-2-ethylhexyl phthalate (DOP) were also made. The external plasticizer was more efficient in reducing the glass temperature than was vinyl stearate. The decline in T_g with weight fraction of plasticizer was linear for the copolymers and terpolymers but concave downward with the liquid diluent. The linear decline was shown to involve mere additivity of the free volume contributed by each side-chain methylene (or methyl) group in both vinyl esters to reducing T_g. The mechanism of the diluent system was more complex. However, the magnitude of the reduction of tensile modulus at a given weight fraction of DOP could be equaled or exceeded by the same amount of vinyl stearate, by increasing the vinyl acetate content of the base copolymer to 40 mole-% or more. Unfortunately, the ultimate strengths and elongations of internally plasticized systems were reduced more than those of the mixtures at comparable compositions. Vinyl stearate was found to markedly retard photolytic degradation compared to both vinyl acetate and the external plasticizer in unstabilized samples having nearly the same thermal treatment. The effect was greater than could be ascribed to dilution by the long alkyl group. The production of a stearoyl radical more stable than the radicals initiating dehydrochlorination is suggested as a possible mechanism.     

Nitric acid digestion and crystallinity of ethylene–vinyl acetate copolymers

Nitric acid digestion studies of ethylene–vinyl acetate copolymers indicated that copolymers containing identical amounts of vinyl acetate but varying in melt index differed in crystallinity. These results were confirmed by x-ray analysis. The differences in crystallinity were interpreted as showing a variation in the degree of short-chain branching in the polyethylene segments of the copolymer chain. This variation was correlated with the conditions of synthesis.     

氯乙烯/丙烯酸酯二元及多元共聚物的研究进展

介绍了氯乙烯/丙烯酸酯多元共聚物、聚氯乙烯树脂/丙烯酸酯/顺丁烯二酰亚胺接枝共聚物、聚氯乙烯树脂/N-取代马来酸胺/丙烯酸酯接枝共聚树脂、氯乙烯/乙酸乙烯/丙烯酸羟丙酯共聚物、氯乙烯/乙酸乙烯/丙烯酸丁酯共聚乳液、聚丙烯酸酯-氯乙烯接枝共聚物、氯乙烯/乙烯/丙烯酸羟乙酯共聚涂料树脂、氯乙烯/丙烯酸甲酯共聚乳液的特点、生产工艺及其性能和用途.     

Grafting of vinyl acetate onto poly(vinyl chloride) in solution

Radiation-induced grafting of vinyl acetate (VAc) onto poly(vinyl chloride) (PVC) was performed in solution with dimethylformamide (DMF). Grafting was studied as a function of dose, dose rate, and VAc/PVC ratio. The amount of grafting was measured by IR spectroscopy on the graft copolymer fraction insoluble in hot methanol. The homopolymerization of VAc was also studied in the same conditions, in order to check the influence of the solvent on radiochemical reactions leading to graft copolymers. The results show that the grafting can be easily obtained and the graft copolymer will be tested for the preparation of ultrafiltration membranes.     

乙烯-醋酸乙烯-氯乙烯共聚树脂合成试验研究

介绍了在10L聚合釜中合成乙烯-醋酸乙烯-氯乙烯(EVA-g-VC)共聚树脂的试验情况。分别研究了EVA种类及用量、EVA的溶胀方法、助剂对聚合过程和树脂颗粒性能的影响规律,制得的EVA-g-VC共聚树脂的加工性能基本达到了国外同类产品水平。     

The radiation-induced emulsion copolymerization of vinyl chloride with vinyl acetate in an engineering flow system

A flow reactor system was used to study the radiation-induced emulsion copolymerization of vinyl chloride with vinyl acetate. The emulsion was recirculated from a stirred vessel through transfer lines to a tubular reactor located within a high-intensity Co-60 source. The effects of physical chemical variables such as soap concentration, phase ratio, reaction temperature and residence time distribution on the molecular weight properties were investigated. The rate of copolymerization was found to be proportional to the 0.17 power of the soap concentration. Variation of the monomer-water ratio produced no significant change in rate. The rate increased with an increase in temperature over the range 5–50°C, while the average molecular weights of the copolymer increased with decreasing polymerization temperature. The molecular weight distribution in this engineering system was found to be essentially similar to those produced in a batch system.     

Effects of poly(vinyl acetate) and poly(vinyl chloride‐co‐vinyl acetate) low‐profile additives on properties of cured unsaturated polyester resins. II. glass‐transition temperatures and mechanical properties

Three series of self‐synthesized poly(vinyl acetate)‐based low‐profile additives (LPAs), including poly(vinyl acetate), poly(vinyl chloride‐co‐vinyl acetate), and poly(vinyl chloride‐co‐vinyl acetate‐co‐maleic anhydride), with different chemical structures and molecular weights were studied. Their effects on the glass‐transition temperatures and mechanical properties for thermoset polymer blends made from styrene, unsaturated polyester, and LPAs were investigated by an integrated approach of the static phase characteristics, cured sample morphology, reaction kinetics, and property measurements. Based on Takayanagi mechanical models, the factors that control the glass‐transition temperature in each phase region of the cured samples and the mechanical properties are discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3347–3357, 2003     

Influence of the molecular weight of ethylene vinyl acetate copolymers on the flow and mechanical properties of uncompatibilized polystyrene/ethylene–vinyl acetate copolymer blends

Rubber‐toughened polystyrene (PS) has been extensively studied and is a well‐established material. However, the use of thermoplastic elastomers to toughen PS is new and not well understood. In this study, three types of ethylene vinyl acetate (EVA) copolymers with the same vinyl acetate (VA) content (27.2–28.8 wt %) but with different melt flow indexes (MFI; g (10 min)⁻¹) of 365–440 (Elvax 210), 38.0–48.0 (Elvax 240) and 2.6–3.4 (Elvax 265) were used as impact modifiers for PS. The uncompatibilized blend systems at different compositions were prepared using a twin‐screw extruder and injection moulding to produce the required test pieces. The viscosity of the dispersed phase (EVA) has a significant effect on the mechanical properties of the blends. Rheological studies show that uncompatibilized PS/EVA265 blends exhibit some degree of compatibility when the amount of EVA265 added is below 30 wt %. These results indicate that EVA265 with the lowest melt flow index or highest molecular weight is the most effective impact modifier for PS. The mechanism for such behaviour is still unclear. © 2001 Society of Chemical Industry     

Study of dynamic mechanical properties of poly(vinyl chloride)–ethylene vinyl acetate copolymer and poly(vinyl chloride)–chlorinated ethylene vinyl acetate copolymer mixtures

The compatibility of the mixtures poly(vinyl chloride)—ethylene vinyl acetate copolymer and poly(vinyl chloride)—chlorinated ethylene vinyl acetate copolymer was studied by the method of dynamic mechanical testing. The character of G′ and G″ was confronted with the Takayanagi model. In all cases a limited compatibility of the components was observed.     

Miscibility of poly(vinyl chloride) with ethylene-ethyl acrylate-carbon monoxide terpolyrners

Ethylene/ethyl acrylate/carbon monoxide ter polymers (E/ EA/CO) can exhibit a very high degree of miscibility with poly(vinyl chloride) as determined from dynamic mechanical measurements. The blends yield transparent films and show a large amorphous phase which exhibits only one major glass transition. However, some crystallinity can be detected and has been measured by differential, scanning calorimetry. Residual crystallinity is at least partially due to the somewhat non-uniform nature of the terpolymerization. The acrylate monomer exhibits faster polymerization rates than the other two constituents. By contrast, ethylene/ethyl acrylat copolymers are not miscible with poly(vinyl chloride). The addition of carbon monoxide to the termpolymer structure is believed to yield miscibility with poly(vinyl chloride) via specific interaction of the ketone carbonyl of the terpolymer (proton acceptor) and the tertiary hydrogen of poly(vinyl chloride) (proton donor). This specific interaction allows for a broad range of terpolymer compositions which retain miscibility with polyvinyl chloride. Similar results are also observed with ethylene/vinyl acetate/carbon monoxide (E/VA/CO) as well as ethylene/2-ethylhexyl acrylate/carbon monoxide termpojymers. The vinyl acetate terpolymers (and their blends) display a lower degree of crystallinity than the E/EA/ CO. This is consistent with the more uniform nature of the E/VAJCO terpolymerization.