Nitrogen‐Doped Cobalt Oxide Nanostructures Derived from Cobalt–Alanine Complexes for High‐Performance Oxygen Evolution Reactions

Taking advantage of the self‐assembling function of amino acids, cobalt–alanine complexes are synthesized by straightforward process of chemical precipitation. Through a controllable calcination of the cobalt–alanine complexes, N‐doped Co₃O₄ nanostructures (N‐Co₃O₄) and N‐doped CoO composites with amorphous carbon (N‐CoO/C) are obtained. These N‐doped cobalt oxide materials with novel porous nanostructures and minimal oxygen vacancies show a high and stable activity for the oxygen evolution reaction. Moreover, the influence of calcination temperature, electrolyte concentration, and electrode substrate to the reaction are compared and analyzed. The results of experiments and density functional theory calculations demonstrate that N‐doping promotes the catalytic activity through improving electronic conductivity, increasing OH^? adsorption strength, and accelerating reaction kinetics. Using a simple synthetic strategy, N‐Co₃O₄ reserves the structural advantages of micro/nanostructured complexes, showing exciting potential as a catalyst for the oxygen evolution reaction with good stability.     

Nickel–Cobalt Layered Double Hydroxide Nanosheets for High‐performance Supercapacitor Electrode Materials

A facile and novel one‐step method of growing nickel‐cobalt layered double hydroxide (Ni‐Co LDH) hybrid films with ultrathin nanosheets and porous nanostructures on nickel foam is presented using cetyltrimethylammonium bromide as nanostructure growth assisting agent but without any adscititious alkali sources and oxidants. As pseudocapacitors, the as‐obtained Ni‐Co LDH hybrid film‐based electrodes display a significantly enhanced specific capacitance (2682 F g^?1 at 3 A g^?1, based on active materials) and energy density (77.3 Wh kg^?1 at 623 W kg^?1), compared to most previously reported electrodes based on nickel‐cobalt oxides/hydroxides. Moreover, the asymmetric supercapacitor, with the Ni‐Co LDH hybrid film as the positive electrode material and porous freeze‐dried reduced graphene oxide (RGO) as the negative electrode material, exhibits an ultrahigh energy density (188 Wh kg^?1) at an average power density of 1499 W kg^?1 based on the mass of active material, which greatly exceeds the energy densities of most previously reported nickel or cobalt oxide/hydroxide‐based asymmetric supercapacitors.     

1D/2D Cobalt‐Based Nanohybrids as Electrocatalysts for Hydrogen Generation

The synergistic effects derived from optimizing the chemical and structural features of electrocatalysts permit them to attain remarkable activity and stability. Herein, 1D/2D cobalt‐based nanohybrid (CoNH) electrodes are developed; the structural design consists of Co₃O₄ electrospun nanoribbons (NRs) deposited onto a carbon fiber paper substrate where Co₃O₄ nanosheets are subsequently grown via an electrodeposition step and UV/ozone treatment. The content of noncovalently functionalized carbon nanotubes within the Co₃O₄ NRs is first tuned to enhance their charge transfer properties and mechanical stability. The electrocatalytic activity of the electrodes is further improved by a phosphorus modification of the 1D NRs, resulting in the formation of NaCoPO₄. The optimized 1D/2D CoNH electrode, i.e., ED‐0.09 wt% fCNTs/P‐CoNHs, displays a similar performance to that of platinum in 0.25 m Na₂S/0.35 m Na₂SO₃ (Tafel slope ≈102 mV dec^?1 for the former and ≈96 mV dec^?1 for the latter) and outstanding stability for up to 48 h. The versatility and high activity of this electrode is also demonstrated according to tests in a conventional water splitting system (cell voltage 1.55V, to produce 10 mA cm^?2) and a solar‐driven electrolyzer (1 m KOH).     

High‐Performing Monometallic Cobalt Layered Double Hydroxide Supercapacitor with Defined Local Structure

Through a topochemical oxidative reaction (TOR) under air, a β‐Co(OH)₂ brucite type structure is converted into a monometallic Co^IICo^III–CO₃ layered double hydroxide (LDH). The structural and morphological characterizations are performed using powder X‐ray diffraction, Fourier‐transformed IR spectroscopy, and scanning and transmission electron microscopy. The local structure is scrutinized using an extended X‐ray absorption fine structure, X‐ray absorption near‐edge structure, and pair distribution function analysis. The chemical composition of pristine material and its derivatives (electrochemically treated) are identified by thermogravimetry analysis for the bulk and X‐ray photoelectron spectroscopy for the surface. The electrochemical behavior is investigated on deposited thin films in aqueous electrolyte (KOH) by cyclic voltammetry and electrochemical impedance spectroscopy, and their capacitive properties are further investigated by Galvanostatic cycling with potential limitation. The charge capacity is found to be as high as 1490 F g^?1 for Co^IICo^III–CO₃ LDH at a current density of 0.5 A g^?1. The performances of these materials are described using Ragone plots, which finally allow us to propose them as promising supercapacitor materials. A surface‐to‐bulk comparison using the above characterization techniques gives insight into the cyclability and reversibility limits of this material.     

Ultrathin Layered Hydroxide Cobalt Acetate Nanoplates Face‐to‐Face Anchored to Graphene Nanosheets for High‐Efficiency Lithium Storage

The dramatically increasing demand of high‐energy lithium‐ion batteries (LIBs) urgently requires advanced substitution for graphite‐based anodes. Herein, inspired from the extra capacity of lithium storage in solid‐electrolyte interface (SEI) films, layered hydroxide cobalt acetates (LHCA, Co(Ac)_0.48(OH)_1.52·0.55H₂O) are introduced as novel and high‐efficiency anode materials. Furthermore, ultrathin LHCA nanoplates are face‐to‐face anchored on the surface of graphene nanosheets (GNS) through a facile solvothermal method to improve the electronic transport and avoid agglomeration during repeated cycles. Profiting from the parallel structure, LHCA//GNS nanosheets exhibit extraordinary long‐term and high‐rate performance. At the current densities of 1000 and 4000 mA g^?1, the reversible capacities maintain ≈1050 mAh g^?1 after 200 cycles and ≈780 mAh g^?1 after 300 cycles, respectively, much higher than the theoretical value of LHCA according to the conversion mechanism. Fourier transform infrared spectroscopy confirms the conversion from acetate to acetaldehyde after lithiation. A reasonable mechanism is proposed to elucidate the lithium storage behaviors referring to the electrocatalytic conversion of OH groups with Co nanocatalysts. This work can help further understand the contribution of SEI components (especially LiOH and LiAc) to lithium storage. It is envisaged that layered transition metal hydroxides can be used as advanced materials for energy storage devices.     

Constructing CoO/Co3S4 Heterostructures Embedded in N‐doped Carbon Frameworks for High‐Performance Sodium‐Ion Batteries

Heterostructures are attractive for advanced energy storage devices due to their rapid charge transfer kinetics, which is of benefit to the rate performance. The rational and facile construction of heterostructures with satisfactory electrochemical performance, however, is still a great challenge. Herein, ultrafine hetero‐CoO/Co₃S₄ nanoparticles embedded in N‐doped carbon frameworks (CoO/Co₃S₄@N‐C) are successfully obtained by employing metal‐organic frameworks as precursors. As anodes for sodium ion batteries, the CoO/Co₃S₄@N‐C electrodes exhibit high specific capacity (1029.5 mA h g^?1 at 100 mA g^?1) and excellent rate capability (428.0 mA h g^?1 at 5 A g^?1), which may be attributed to their enhanced electric conductivity, facilitated Na⁺ transport, and intrinsic structural stability. Density functional theoretical calculations further confirm that the constructed heterostructures induce electric fields and promote fast reaction kinetics in Na⁺ transport. This work provides a feasible approach to construct metal oxide/sulfide heterostructures toward high‐performance metal‐ion batteries.     

Gold‐Cobalt Nanoparticle Alloys Exhibiting Tunable Compositions,Near‐Infrared Emission,and High T2 Relaxivity

We demonstrate the synthesis of discrete, composition‐tunable gold‐cobalt nanoparticle alloys (% Co = 0–100%; diameter = 2–3 nm), in contrast with bulk behavior, which shows immiscibility of Au and Co at room temperature across all composition space. These particles are characterized by transmission electron microscopy and ¹H NMR techniques, as well as inductively coupled plasma mass spectrometry, X‐ray photoelectron spectroscopy, and photoluminescence spectroscopy. In particular, ¹H NMR methods allow the simultaneous evaluation of composition‐tunable magnetic properties as well as molecular characterization of the colloid, including ligand environment and hydrodynamic diameter. These experiments also demonstrate a route to optimize bimodal imaging modalities, where we identify Au_xCo_yNP compositions that exhibit both bright NIR emission (2884 m ^?1cm^?1) as well as some of the highest per‐particle T ₂ relaxivities (12200 mm _NP ^?1s^?1) reported to date for this particle size range.     

A High‐Performance Binary Ni–Co Hydroxide‐based Water Oxidation Electrode with Three‐Dimensional Coaxial Nanotube Array Structure

Developing nanostructured Ni and Co oxides with a small overpotential and fast kinetics of the oxygen evolution reaction (OER) have drawn considerable attention recently because their theoretically high efficiency, high abundance, low cost, and environmental benignity in comparison with precious metal oxides, such as RuO₂ and IrO₂. However, how to increase the specific activity area and improve their poor intrinsic conductivity is still challenging, which significantly limits the overall OER rate and largely prevent their utilization. Thus, developing effective OER electrocatalysts with abundant active sites and high electrical conductivity still remains urgent. In this work, a scrupulous design of OER electrode with a unique sandwich‐like coaxial structure of the three‐dimensional Ni@[Ni^(2+/3+)Co₂(OH)_6–7]_x nanotube arrays (3D NNCNTAs) is reported. A Ni nanotube array with open end is homogeneous coated with Ni and Co co‐hydroxide nanosheets ([Ni^(2+/3+)Co₂(OH)_6–7]_x) and is employed as multifunctional interlayer to provide a large surface area and fast electron transport and support the outermost [Ni^(2+/3+)Co₂(OH)_6–7]_x layer. The remarkable features of high surface area, enhanced electron transport, and synergistic effects have greatly assured excellent OER activity with a small overpotential of 0.46 V at the current density of 10 mA cm^?2 and high stability.     

Lithiation‐Induced Vacancy Engineering of Co3O4 with Improved Faradic Reactivity for High‐Performance Supercapacitor

Transition metal oxides are promising electrode candidates for supercapacitor because of their low cost, high theoretical capacity, and good reversibility. However, intrinsically poor electrical conductivity and sluggish reaction kinetics of these oxides normally lead to low specific capacity and slow rate capability of the devices. Herein, a commonly used cobalt oxide is used as an example to demonstrate that lithiation process as a new strategy to enhance its electrochemical performance for supercapacitor application. Detailed characterization reveals that electrochemical lithiation of Co₃O₄ crystal reduces the coordination of the Co? O band, leading to substantially increased oxygen vacancies (octahedral Co²⁺ sites). These vacancies further trigger the formation of a new electronic state in the bandgap, resulting in remarkably improved electrical conductivity and accelerated faradic reactions. The lithiated Co₃O₄ exhibits a noticeably enhanced specific capacity of 260 mAh g^?1 at 1 A g^?1, approximately fourfold enhancement compared to that of pristine Co₃O₄ (66 mAh g^?1). The hybrid supercapacitor assembled with lithiated Co₃O₄//N‐doped activated carbon achieves high energy densities in a broad range of power densities, e.g., 76.7 Wh kg^?1 at 0.29 kW kg^?1, 46.9 Wh kg^?1 at a high power density of 18.7 kW kg^?1, outperforming most of the reported hybrid supercapacitors.     

Ultrathin Nickel–Cobalt Phosphate 2D Nanosheets for Electrochemical Energy Storage under Aqueous/Solid‐State Electrolyte

2D materials are ideal for constructing flexible electrochemical energy storage devices due to their great advantages of flexibility, thinness, and transparency. Here, a simple one‐step hydrothermal process is proposed for the synthesis of nickel–cobalt phosphate 2D nanosheets, and the structural influence on the pseudocapacitive performance of the obtained nickel–cobalt phosphate is investigated via electrochemical measurement. It is found that the ultrathin nickel–cobalt phosphate 2D nanosheets with an Ni/Co ratio of 4:5 show the best electrochemical performance for energy storage, and the maximum specific capacitance up to 1132.5 F g^?1. More importantly, an aqueous and solid‐state flexible electrochemical energy storage device has been assembled. The aqueous device shows a high energy density of 32.5 Wh kg^?1 at a power density of 0.6 kW kg^?1, and the solid‐state device shows a high energy density of 35.8 Wh kg^?1 at a power density of 0.7 kW kg^?1. These excellent performances confirm that the nickel–cobalt phosphate 2D nanosheets are promising materials for applications in electrochemical energy storage devices.     

A Cobalt‐Based Amorphous Bifunctional Electrocatalysts for Water‐Splitting Evolved from a Single‐Source Lazulite Cobalt Phosphate

Over the years, cobalt phosphates (amorphous or crystalline) have been projected as one of the most significant and promising classes of nonprecious catalysts and studied exclusively for the electrocatalytic and photocatalytic oxygen evolution reaction (OER). However, their successful utilization of hydrogen evolution reaction (HER) and the reaction of overall water‐splitting is rather unexplored. Herein, presented is a crystalline cobalt phosphate, Co₃(OH)₂(HPO₄)₂, structurally related to the mineral lazulite, as an efficient precatalyst for OER, HER, and water electrolysis in alkaline media. During both electrochemical OER and HER, the Co₃(OH)₂(HPO₄)₂ nanostructure was completely transformed in situ into porous amorphous CoO_x (OH) films that mediate efficient OER and HER with extremely low overpotentials of only 182 and 87 mV, respectively, at a current density of 10 mA cm^?2. When assemble as anode and cathode in a two‐electrode alkaline electrolyzer, unceasing durability over 10 days is achieved with a final cell voltage of 1.54 V, which is superior to the recently reported effective bifunctional electrocatalysts. The strategy to achieve more active sites for oxygen and hydrogen generation via in situ oxidation or reduction from a well‐defined inorganic material provides an opportunity to develop cost‐effective and efficient electrocatalysts for renewable energy technologies.     

Cobalt–Cobalt Phosphide Nanoparticles@Nitrogen‐Phosphorus Doped Carbon/Graphene Derived from Cobalt Ions Adsorbed Saccharomycete Yeasts as an Efficient,Stable, and Large‐Current‐Density Electrode for Hydrogen Evolution Reactions

Development of electrocatalysts for hydrogen evolution reaction (HER) with low overpotential and robust stability remains as one of the most serious challenges for energy conversion. Herein, a serviceable and highly active HER electrocatalyst with multilevel porous structure (Co‐Co₂P nanoparticles@N, P doped carbon/reduced graphene oxides (Co‐Co₂P@NPC/rGO)) is synthesized by Saccharomycete cells as template to adsorb metal ions and graphene nanosheets as separating agent to prevent aggregation, which is composed of Co‐Co₂P nanoparticles with size of ≈104.7 nm embedded into carbonized Saccharomycete cells. The Saccharomycete cells provide not only carbon source to produce carbon shells, but also phosphorus source to prepare metal phosphides. In order to realize the practicability and permanent stability, the binderless and 3D electrodes composed of obtained Co‐Co₂P@NPC/rGO powder are constructed, which possess a low overpotential of 61.5 mV (achieve 10 mA cm^?2) and the high current density with extraordinary catalytic stability (1000 mA cm^?2 for 20 h) in 0.5 m H₂SO₄. The preparation process is appropriate for synthesizing various metal or metal phosphide@carbon electrocatalysts. This work may provide a biological template method for rational design and fabrication of various metals or metal compounds@carbon 3D electrodes with promising applications in energy conversion and storage.     

Confined Transformation of Organometal‐Encapsulated MOFs into Spinel CoFe2O4/C Nanocubes for Low‐Temperature Catalytic Oxidation

Development of spinel bimetallic oxides as low‐cost and high‐efficiency catalysts for catalytic oxidation is highly desired. However, rational design of spinel oxides with controlled structure and components still remains a challenge. A general route for large‐scale preparation of spinel CoFe₂O₄/C nanocubes transformed from organometal‐encapsulated metal–organic frameworks (MOFs) via exchange–coordination and pyrolysis combined method is reported. Strong confinement effect between organometallics and MOFs realizes reconstruction of crystal phase and composition, but not simple metallic oxides support by Co²⁺ introduction. Compared with Co₃O₄‐Fe₂O₃/C, MOFs‐derived cubic nano‐CoFe₂O₄/C with higher surface area (115.7 m² g^?1) and favorable surface chemistry exhibits excellent catalytic activity (100% CO conversion at 105 °C) and competitive water‐resisting stability (total conversion at 145 °C for 20 h). Turnover frequency of CoFe₂O₄/C reaches 4.26 × 10^?4 s^?1 at 90 °C, two orders of magnitude higher than commercial Co₃O₄ . Theoretical models show that oxygen vacancies (17.7%) at exposed {112} facet on the carbon interface take superiority in nanocubic spinel phase, which allows reactive species to be strongly adsorbed on nanostructured catalysts' surface and plays key roles in hindering deactivation under moisture rich conditions. The progresses offer a promising way in the development of novel spinel oxides with tailored architecture and properties for vast applications.     

Ultrathin‐Nanosheet‐Induced Synthesis of 3D Transition Metal Oxides Networks for Lithium Ion Battery Anodes

A general ultrathin‐nanosheet‐induced strategy for producing a 3D mesoporous network of Co₃O₄ is reported. The fabrication process introduces a 3D N‐doped carbon network to adsorb metal cobalt ions via dipping process. Then, this carbon matrix serves as the sacrificed template, whose N‐doping effect and ultrathin nanosheet features play critical roles for controlling the formation of Co₃O₄ networks. The obtained material exhibits a 3D interconnected architecture with large specific surface area and abundant mesopores, which is constructed by nanoparticles. Merited by the optimized structure in three length scales of nanoparticles–mesopores–networks, this Co₃O₄ nanostructure possesses superior performance as a LIB anode: high capacity (1033 mAh g^?1 at 0.1 A g^?1) and long‐life stability (700 cycles at 5 A g^?1). Moreover, this strategy is verified to be effective for producing other transition metal oxides, including Fe₂O₃, ZnO, Mn₃O₄, NiCo₂O₄, and CoFe₂O₄.     

3D Hierarchical Co3O4 Twin‐Spheres with an Urchin‐Like Structure: Large‐Scale Synthesis,Multistep‐Splitting Growth,and Electrochemical Pseudocapacitors

Novel, 3D hierarchical Co₃O₄ twin‐spheres with an urchin‐like structure are produced successfully on the large scale for the first time by a solvothermal synthesis of cobalt carbonate hydroxide hydrate, Co(CO₃)_0.5(OH)·0.11H₂O, and its subsequent calcination. The morphology of the precursor, which dominates the structure of the final product, evolves from nanorods to sheaf‐like bundles, to flower‐like structures, to dumbbell‐like particles, and eventually to twin‐spheres, accompanying a prolonged reaction time. A multistep‐splitting growth mechanism is proposed to understand the formation of the 3D hierarchical twin‐spheres of the precursor, based on the time effect on the morphologies of the precursor. The 3D hierarchical Co₃O₄ twin‐spheres are further used as electrode materials to fabricate supercapacitors with high specific capacitances of 781, 754, 700, 670, and 611 F g^?1 at current densities of 0.5, 1, 2, 4, and 8 A g^?1, respectively. The devices also show high charge‐discharge reversibility with an efficiency of 97.8% after cycling 1000 times at a current density of 4 A g^?1.     

Fe3O4‐Decorated Co9S8 Nanoparticles In Situ Grown on Reduced Graphene Oxide: A New and Efficient Electrocatalyst for Oxygen Evolution Reaction

Cobalt sulfide materials have attracted enormous interest as low‐cost alternatives to noble‐metal catalysts capable of catalyzing both oxygen reduction and oxygen evolution reactions. Although recent advances have been achieved in the development of various cobalt sulfide composites to expedite their oxygen reduction reaction properties, to improve their poor oxygen evolution reaction (OER) activity is still challenging, which significantly limits their utilization. Here, the synthesis of Fe₃O₄‐decorated Co₉S₈ nanoparticles in situ grown on a reduced graphene oxide surface (Fe₃O₄@Co₉S₈/rGO) and the use of it as a remarkably active and stable OER catalyst are first reported. Loading of Fe₃O₄ on cobalt sulfide induces the formation of pure phase Co₉S₈ and highly improves the catalytic activity for OER. The composite exhibits superior OER performance with a small overpotential of 0.34 V at the current density of 10 mA cm^?2 and high stability. It is believed that the electron transfer trend from Fe species to Co₉S₈ promotes the breaking of the Co–O bond in the stable configuration (Co–O–O superoxo group), attributing to the excellent catalytic activity. This development offers a new and effective cobalt sulfide‐based oxygen evolution electrocatalysts to replace the expensive commercial catalysts such as RuO₂ or IrO₂.     

Three‐Dimensional Co3O4@MnO2 Hierarchical Nanoneedle Arrays: Morphology Control and Electrochemical Energy Storage

In this paper, a highly ordered three‐dimensional Co₃O₄@MnO₂ hierarchical porous nanoneedle array on nickel foam is fabricated by a facile, stepwise hydrothermal approach. The morphologies evolution of Co₃O₄ and Co₃O₄@MnO₂ nanostructures upon reaction times and growth temperature are investigated in detail. Moreover, the as‐prepared Co₃O₄@MnO₂ hierarchical structures are investigated as anodes for both supercapacitors and Li‐ion batteries. When used for supercapacitors, excellent electrochemical performances such as high specific capacitances of 932.8 F g^?1 at a scan rate of 10 mV s^?1 and 1693.2 F g^?1 at a current density of 1 A g^?1 as well as long‐term cycling stability and high energy density (66.2 W h kg^?1 at a power density of 0.25 kW kg^?1), which are better than that of the individual component of Co₃O₄ nanoneedles and MnO₂ nanosheets, are obtained. The Co₃O₄@MnO₂ NAs are also tested as anode material for LIBs for the first time, which presents an improved performance with high reversible capacity of 1060 mA h g^?1 at a rate of 120 mA g^?1, good cycling stability, and rate capability.     

Local Built‐In Electric Field Enabled in Carbon‐Doped Co3O4 Nanocrystals for Superior Lithium‐Ion Storage

In this work, a novel concept of introducing a local built‐in electric field to facilitate lithium‐ion transport and storage within interstitial carbon (C‐) doped nanoarchitectured Co₃O₄ electrodes for greatly improved lithium‐ion storage properties is demonstrated. The imbalanced charge distribution emerging from the C‐dopant can induce a local electric field, to greatly facilitate charge transfer. Via the mechanism of “surface locking” effect and in situ topotactic conversion, unique sub‐10 nm nanocrystal‐assembled Co₃O₄ hollow nanotubes (HNTs) are formed, exhibiting excellent structural stability. The resulting C‐doped Co₃O₄ HNT‐based electrodes demonstrate an excellent reversible capacity ≈950 mA h g^?1 after 300 cycles at 0.5 A g^?1 and superior rate performance with ≈853 mA h g^?1 at 10 A g^?1.     

Amorphous Cobalt–Iron Hydroxide Nanosheet Electrocatalyst for Efficient Electrochemical and Photo‐Electrochemical Oxygen Evolution

Finding efficient electrocatalysts for oxygen evolution reaction (OER) that can be effectively integrated with semiconductors is significantly challenging for solar‐driven photo‐electrochemical (PEC) water splitting. Herein, amorphous cobalt–iron hydroxide (CoFe? H) nanosheets are synthesized by facile electrodeposition as an efficient catalyst for both electrochemical and PEC water oxidation. As a result of the high electrochemically active surface area and the amorphous nature, the optimized amorphous CoFe? H nanosheets exhibit superior OER catalytic activity in alkaline environment with a small overpotential (280 mV) to achieve significant oxygen evolution (j = 10 mA cm^?2) and a low Tafel slope (28 mV dec^?1). Furthermore, CoFe? H nanosheets are simply integrated with BiVO₄ semiconductor to construct CoFe? H/BiVO₄ photoanodes that exhibit a significantly enhanced photocurrent density of 2.48 mA cm^?2 (at 1.23 V vs reversible hydrogen electrode (RHE)) and a much lower onset potential of 0.23 V (vs RHE) for PEC‐OER. Careful electrochemical and optical studies reveal that the improved OER kinetics and high‐quality interface at the CoFe? H/BiVO₄ junction, as well as the excellent optical transparency of CoFe? H nanosheets, contribute to the high PEC performance. This study establishes amorphous CoFe? H nanosheets as a highly competitive candidate for electrochemical and PEC water oxidation and provides general guidelines for designing efficient PEC systems.     

Synthesis of Self‐Supported Ordered Mesoporous Cobalt and Chromium Nitrides

Herein, we demonstrate an ammonia nitridation approach to synthesize self‐supported ordered mesoporous metal nitrides (CoN and CrN) from mesostructured metal oxide replicas (Co₃O₄ and Cr₂O₃), which were nanocastly prepared by using mesoporous silica SBA‐15 as a hard template. Two synthetic routes are adopted. One route is the direct nitridation of mesoporous metal oxide nanowire replicas templated from SBA‐15 to metal nitrides. By this method, highly ordered mesoporous cobalt nitrides (CoN) can be obtained by the transformation of Co₃O₄ nanowire replica under ammonia atmosphere from 275 to 350 °C, without a distinct lose of the mesostructural regularity. Treating the samples above 375 °C leads to the formation of metallic cobalt and the collapse of the mesostructure due to large volume shrinkage. The other route is to transform mesostructured metal oxides/silica composites to nitrides/silica composites at 750–1000 °C under ammonia. Ordered mesoporous CrN nanowire arrays can be obtained after the silica template removal by NaOH erosion. A slowly temperature‐program‐decrease process can reduce the influence of silica nitridation and improve the purity of final CrN product. Small‐angle XRD patterns and TEM images showed the 2‐D ordered hexagonal structure of the obtained mesoporous CoN and CrN nanowires. Wide‐angle XRD patterns, HRTEM images, and SAED patterns revealed the formation of crystallized metal nitrides. Nitrogen sorption analyses showed that the obtained materials possessed high surface areas (70–90 m² g^?1) and large pore volumes (about 0.2 cm³ g^?1).