Effects of shearing and comonomer content on the crystallization behavior of poly(butylene succinate‐co‐butylene 2‐ethyl‐2‐methyl succinate)

Poly(butylene succinate‐co‐butylene 2‐ethyl‐2‐methyl succinate) (PBSEMS) random copolymers were prepared with different comonomer compositions. The effects of shearing and comonomer content on the crystallization behavior of these copolymers were investigated at 80 °C. The thermal and morphological properties of the resulting samples were also discussed. The copolymers showed a longer induction time and a slower crystallization rate with increasing comonomer content. The promoting effect of shear on the overall crystallization behavior was more notable for those copolymers containing more 2‐ethyl‐2‐methyl succinic acid (EMSA) units. The melting temperature of ‘as‐prepared’ poly(butylene succinate) (PBS) was ca. 115 °C, while that of the copolymers varied from 112 to 102 °C. Higher comonomer contents in the copolymers gave rise to lower melting temperatures and broader melting peaks. In addition, the isothermally crystallized samples showed multiple melting endothermic behavior, the extent of which depended on the comonomer content. The copolymers showed different wide‐angle X‐ray diffraction (WAXD) patterns from that of neat PBS, depending on the comonomer content and shear applied during crystallization. With increasing comonomer content, the copolymers crystallized without shearing, showing the shifting of a diffraction peak to a higher angle, while those crystallized under shear did not show any peak shift. Copyright © 2004 Society of Chemical Industry     

Nanocomposites of PBAT and cellulose nanocrystals modified by in situ polymerization and melt extrusion

Cellulose nanocrystals (CNC) were successfully grafted with a low molecular weight poly(butylene glutarate) through an in situ polymerization procedure. The grafting treatment decreased the CNC hydrophilic character and increased the onset of their thermal degradation by approximately 20°C, thus increasing the possibilities of CNC application. Composites of grafted and nongrafted CNC with a poly(butylene‐adipate‐co‐terephthalate) (PBAT) matrix were prepared by melt extrusion. The CNC addition led to an increase of 50% of the tensile elastic modulus of the PBAT. In addition, dynamic mechanical thermal analysis showed that the composite with CNC retained its high modulus even at temperatures far above the glass transition temperature of PBAT. At 60°C the storage modulus of the composite with CNC was approximately 200% higher than that of the pure PBAT. Thus, in this work, nanocomposites of improved properties were obtained through a combination of in situ polymerization and melt extrusion. POLYM. ENG. SCI., 56:1339–1348, 2016. © 2016 Society of Plastics Engineers     

Synthesis and evaluation of biodegradable segmented multiblock poly(ether ester) copolymers for biomaterial applications

Based on 1,4‐succinic acid, 1,4‐butanediol, poly(ethylene glycol)s and dimethyl terephthalate, biodegradable segmented multiblock copolymers of poly[(butylene terephthalate)‐co‐poly(butylene succinate)‐block‐poly(ethylene glycol)] (PTSG) were synthesized with different poly(butylene succinate) (PBS) molar fractions and varying the poly(ethylene glycol) (PEG) segment length, and were evaluated as biomedical materials. The copolymer extracts showed no in vitro cytotoxicity. However, sterilization of the copolymers by gamma irradiation had some limited effect on the cytotoxicity and mechanical properties. A copolymer consisting of PEG‐1000 and 20 mol% PBS, assigned as 1000PBS20 after SO₂ gas plasma treatment, sustained the adhesion and growth of dog vascular smooth muscle cells. The in vivo biocompatibility of this sample was also measured subcutaneously in rats for 4 weeks. The assessments indicated that these poly(ether ester) copolymers are good candidates for anti‐adhesion barrier and drug controlled‐release applications. Copyright © 2004 Society of Chemical Industry     

In situ polymerized nanocomposites of poly(butylene succinate)/Tio2 nanofibers: molecular weight,morphology, and thermal properties

In this study, the nanocomposites of poly(butylene succinate) (PBS) and TiO₂ nanofibers were first synthesized via in situ polymerization. Molecular weight, morphology, and thermal properties of the nanocomposites were characterized. As the weight percentage of TiO₂ nanofibers increased from 0 to 2%, the molecular weight of PBS in the nanocomposites decreased gradually compared with that of pure PBS. In morphology, the nanocomposites were constituted by free PBS and PBS‐grafted TiO₂ nanofibers (PBS‐g‐TiO₂), which were proved by the Fourier transform infrared, scanning electron microscopy (SEM), and transmission electron microscopy. In addition, the SEM demonstrated the strong interfacial interaction and homogeneous distribution between TiO₂ nanofibers and PBS matrix. The thermal properties determined by differential scanning calorimetry and thermogravimetric analysis included the increasing of cold crystallization temperatures, the melting temperatures, and the thermal stability. Besides, the crystallinity and the rate of crystallization of the nanocomposites were enhanced, which were also observed by the X‐ray diffraction. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Organomodification of montmorillonite and its effects on the properties of poly(butylene succinate) nanocomposites

The pristine sodium montmorillonite (MMT) was organically modified with hexadecyltrimethylammonium bromide (HTAB) at different contents. The organoclay was characterized by X‐ray diffraction (XRD), Fourier transform infrared spectroscopy, energy dispersive X‐ray techniques, and thermogravimetric analysis. Then, poly(butylene succinate) (PBS) nanocomposites were prepared by melt‐mixing process using maleic anhydride‐grafted PBS (PBS‐g‐MA) as compatibilizer. It was found that the mechanical properties of PBS nanocomposites filled with organoclay were apparently higher than that of the nanocomposite filled with MMT. This is attributed to the better filler–matrix interactions between PBS and the organoclay and the better filler dispersion. This is verifiable through the XRD, scanning electron microscopy, and transmission electron microscopy. The addition of PBS‐g‐MA further improved the mechanical properties. It was also found that our laboratory synthesized organoclay modified with HTAB has provided a better reinforcing efficiency when compared with the commercial octadecylamine‐modified organoclay. Besides that the thermal properties of PBS nanocomposites were studied through differential scanning calorimetry. POLYM. ENG. SCI., 2013. © 2013 Society of Plastics Engineers     

Thermal and dynamic mechanical properties of attapulgite reinforced poly(butylene succinate‐co‐1,2‐ octanediol succinate) nanocomposites

Attapulgite (ATP)‐reinforced poly(butylene succinate‐co‐1,2‐octanediol succinate) nanocomposites were fabricated using an in situ two‐step polymerization method. The transmission electron microscopy (TEM) results showed a superior interfacial linkage between ATP and PBS matrix. The isothermal crystallization kinetics results showed that ATP can effectively act as a nucleating agent, resulting in an enhancement on the crystallization temperature and crystallization rate. The incorporation of ATP nanoparticles probably induced heterogeneous nucleation that made the lower activation energy. The equilibrium melting temperature ( ) of the ATP reinforced branched copolymer also had little difference with the homogeneous PBS. The temperature at an initial thermal degradation was improved for the ATP reinforced branched nanocomposites. The dynamic mechanical analysis (DMA) results showed that there was a significant increase of storage modulus (E′) in an overall temperature range of all ATP reinforced nanocomposites. ATP had a strong effect on the elastic properties of the homogeneous PBS matrix. POLYM. COMPOS., 34:1126–1135, 2013. © 2013 Society of Plastics Engineers     

Synthesis and characterization of poly(butylene terephthalate‐co‐triethylene terephthalate) copolyesters

Poly(butylene terephthalate‐co‐triethylene terephthalate) random copolymers of various compositions and molecular weights were synthesized in bulk and characterized in terms of their chemical structure and thermal and rheological properties. At room temperature all the copolymers were partially crystalline and showed good thermal stability. The main effect of copolymerization was a decrease in the melting and glass‐transition temperatures with respect to the poly(butylene tere‐ phthalate) homopolymer. The fusion temperatures were well correlated with the composition by the Baur equation and the equilibrium melting temperature and the heat of fusion extrapolated values for poly(butylene terephthalate) were in good agreement with those reported elsewhere. Triethylene terephthalate units were found to influence the rheological behavior in the melt, the viscosity being significantly higher than that of the poly(butylene terephthalate‐co‐diethylene terephthalate) copolymers investigated previously. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 981–990, 2001     

Synthesis and characterization of poly[(butylene succinate)‐co‐(butylene terephthalate)]‐b‐poly(tetramethylene glycol) segmented block copolymer

Polyester‐polyether segmented block copolymers of poly[(butylene succinate)‐co‐poly(butylene terephthalate)] (PBS–PBT) and poly(tetramethylene glycol) (PTMG) (M_n = 2000) with various compositions were synthesized. PBT content in the PBS was adjusted to ca. 5 mol %. Their thermal and mechanical properties were investigated. In the case of copolymer, the melting point of the PBS–PBT control was 107.8°C, and the melting point of the copolymer containing 70 wt % of PTMG was 70.1°C. Crystallinity of soft segment was 5 ∼ 17%, and that of hard segment was 42 ∼ 59%. The breaking stress of the PBS–PTMG control was 47 MPa but it decreased with increasing PTMG content. In the case of copolymer containing 70 wt % of PTMG, breaking stress was 36 MPa. Contrary to the decreasing breaking stress, breaking strain increased from 300% for PBS–PBT control to 900% for a copolymer containing 70 wt % of PTMG. The shape recovery ratios of the copolymer containing 70 wt % PTMG were almost twice of those of copolymers containing 40 wt % PTMG. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 79: 2067–2075, 2001     

Miscibility,crystallization, and mechanical properties of poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)/ poly(butylene succinate) blends

Naturally amorphous biopolyester poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) (P3/4HB) containing 21 mol % of 4HB was blended with semi‐crystal poly(butylene succinate) (PBS) with an aim to improve the properties of aliphatic polyesters. The effect of PBS contents on miscibility, thermal properties, crystallization kinetics, and mechanical property of the blends was evaluated by DSC, TGA, FTIR, wide‐angle X‐ray diffractometer (WAXD), Scanning Electron Microscope (SEM), and universal material testing machine. The thermal stability of P3/4HB was enhanced by blending with PBS. When PBS content is less than 30 wt %, the two polymers show better miscibility and their crystallization trend was enhanced by each other. The optimum mechanical properties were observed at the 5–10 wt % PBS blends. However, when the PBS content is more than 30 wt %, phase inversion happened. And the two polymers give lower miscibility and poor mechanical properties. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Effect of isocyanate‐modified fumed silica on the properties of poly(butylene succinate) nanocomposites

Using the grafting method on a silica surface with PBS molecules, we prepared novel poly(butylene succinate) (PBS)/silica nanocomposites to enhance dispersibility and interfacial adhesion between silica particles and the PBS matrix, and also investigated the effects of silica‐g‐PBS on the PBS matrix using differential scanning calorimetry, thermogravimetric analysis, transmission electron microscopy, a tensile testing machine, and rheometry. The thermal stability, mechanical properties, and rheological properties of PBS nanocomposites containing silica‐g‐PBS was remarkably improved because of the surface characteristics of the silica grafted with PBS molecules, which provided good compatibility and dispersion. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of biodegradable poly(butylene succinate‐co‐propylene succinate)s

Biodegradable polyesters such as poly(butylene succinate) (PBS), poly(propylene succinate) (PPS), and poly(butylene succinate‐co‐propylene succinate)s (PBSPSs) were synthesized respectively, from 1,4‐succinic acid with 1,4‐butanediol and 1,3‐propanediol through a two‐step process of esterification and polycondensation in this article. The composition and physical properties of both homopolyesters and copolyesters were investigated via ¹H NMR, DSC, TGA, POM, AFM, and WAXD. The copolymer composition was in good agreement with that expected from the feed composition of the reactants. The melting temperature (T_m), crystallization temperature (T_c), crystallinity (X), and thermal decomposition temperature (T_d) of these polyesters decreased gradually as the content of propylene succinate unit increased. PBSPS copolyesters showed the same crystal structure as the PBS homopolyester. Besides the normal extinction crosses under the polarizing optical microscope, the double‐banded extinction patterns with periodic distance along the radial direction were also observed in the spherulites of PBS and PBSPS. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of ethylene ionomers on the properties of crosslinked polyethylene

Most premature failure of underground crosslinked polyethylene (XLPE) cables in service, a matter of great concern, is due to aging induced by water treeing. To improve the water‐tree resistance, sodium‐neutralized poly (ethylene‐co‐acrylic acid) (EAA–Na) ionomers were blended with XLPE; the EAA–Na ionomers were prepared through the neutralization of sodium hydroxide and poly(ethylene‐co‐acrylic acid). A series of XLPE/EAA–Na ionomer blends were investigated through the measurement of the water absorption ratio, water treeing, and mechanical and dielectric testing; the results strongly suggested that EAA–Na ionomers could improve the water‐tree resistance of XLPE, and the XLPE/EAA–Na blends retained excellent mechanical properties and dielectric properties. Moreover, through the characterization of XLPE/EAA–Na blends with Fourier transform infrared spectrometry, dynamic mechanical analysis, and scanning electron microscopy, it was found that the neutralization reaction could be achieved completely; the XLPE and EAA–Na ionomers were partially compatible, so the EAA–Na ionomers could be dispersed well in the matrix with the process examined in this study. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3483–3490, 2007     

Crystallization behaviour of cellulose acetate butylate/poly(butylene succinate)‐co‐(butylene carbonate) blends

The kinetics of the isothermal crystallization process from the melt of pure poly(butylene succinate)‐co‐(butylene carbonate) (PBS‐co‐BC) and its blends with cellulose acetate butylate (CAB) (10–30 wt%) was studied by differential scanning calorimetry (DSC) and the well‐known Avrami equation. In the blends, the overall crystallization rate of PBS‐co‐BC became slower with increasing CAB content. The equilibrium melting temperature ( ) of PBS‐co‐BC decreased with increasing CAB content, which was similar to that with other miscible crystalline/amorphous polymer blends. The slower crystallization kinetics of PBS‐co‐BC in the blends was explicable in terms of a diluent effect of the CAB component. By application of Turnbull–Fisher kinetic theory for polymer–diluent blend systems, the surface free energy (σ_e) of pure PBS‐co‐BC and of the blends was obtained, indicating that the blend with CAB resulted in a decrease in the surface free energy of folding of PBS‐co‐BC lamellar crystals. Copyright © 2006 Society of Chemical Industry     

Enhanced mechanical and thermal properties of biodegradable poly(butylene succinate‐co‐adipate)/graphene oxide nanocomposites via in situ polymerization

Poly(butylene succinate‐co‐butylene adipate) (PBSA)/graphene oxide (GO) nanocomposites were synthesized via in situ polymerization for the first time. Atomic force microscopy demonstrated the achievement of a single layer of GO, and transmission electron microscopy proved the homogeneous distribution of GO in the PBSA matrix. Fourier transform infrared spectroscopy results showed the successful grafting of PBSA chains onto GO. With the incorporation of 1 wt % GO, the tensile strength and flexural modulus of the PBSA were enhanced by 50 and 27%, respectively. The thermal properties characterized by differential scanning calorimetry and thermogravimetric analysis showed increases in the melting temperatures, crystallization temperatures, and thermal stability. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4075–4080, 2013     

Crystallization,morphology, and mechanical properties of poly(butylene succinate)/poly(ethylene oxide)‐polyhedral oligomeric silsesquioxane nanocomposites

The biodegradable poly(butylene succinate) (PBS)/poly(ethylene oxide)‐polyhedral oligomeric silsesquioxane (PEO‐POSS) nanocomposites were prepared by the solution blending and melt‐injection methods. The effect of PEO‐POSS on the non‐isothermal and isothermal crystallization, morphology, as well as mechanical properties of PBS was carefully investigated. The PEO‐POSS nanoparticles dispersed well in the PBS matrix, with the diameters around 30 nm. From isothermal crystallization analysis, the incorporation of PEO‐POSS enhanced the crystallization of PBS due to the heterogeneous nucleation effect while the crystal structure of PBS remained. PBS/PEO‐POSS nanocomposites showed of higher glass transition temperatures than that of neat PBS, attributing to the existence of PEO‐POSS decreasing the flexibility of PBS chains. The elongation at break of the PBS/PEO‐POSS nanocomposites reached the maximum value with PEO‐POSS content of 5 wt%. However, the elastic modulus of PBS decreased after the incorporation of PEO‐POSS. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Poly(Li‐2‐hydroxyethyl methacrylate)‐co‐poly(4‐vinyl pyridine): Molar mass effects on strong electrorheological response

Electrorheological (ER) fluids display remarkable rheological behavior, being able to convert rapidly and repeatedly from a fluid to a solid‐like when an external electric field (E) is applied or removed. In this study, electrical and ER properties of poly(Li‐2‐hydroxyethyl methacrylate)‐co‐poly(4‐vinyl pyridine), poly(Li‐HEMA)‐co‐poly(4‐VP), copolymeric salts (ionomers) were investigated. For this purpose six ionomers were synthesized with different molar masses. They were then ground‐milled for a few hours to obtain micron size ionomers. The particle sizes of the ionomers were determined by dynamic light scattering. Suspensions of ionomers were prepared in silicone oil (SO), at a series of concentrations (c = 5–30%, m/m). The gravitational stability of suspensions against sedimentation was determined at constant temperature (T = 25°C). Flow times of the suspensions were measured under no electric field (E = 0 kV/mm), and under an external applied electric field (E ≠ 0 kV/mm) strengths and a strong ER activities were observed for all the poly(Li‐HEMA)‐co‐poly(4‐VP)/SO suspensions. Further, the effects of suspension concentration, mole ratios of poly(HEMA) and poly(4‐VP), and the overall molar mass of the copolymers, shear rate, electric field strength, frequency, promoter, and temperature onto ER activities of ionomer suspensions were investigated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1065–1074, 2006     

Biodegradable poly(butylene succinate‐co‐butylene adipate)/multiwalled carbon nanotube nanocomposites: Preparation,morphology, and crystallization behavior

Biodegradable poly(butylene succinate‐co‐butylene adipate) (PBSA)/multiwalled carbon nanotubes (MWCNTs) nanocomposites were prepared via a simple melt‐compounding method at low MWCNTs contents. Scanning and transmission electron microscopy observations revealed a relatively nice dispersion of MWCNTs throughout the PBSA matrix. Both the nonisothermal and isothermal melt crystallizations of PBSA were enhanced significantly in the nanocomposites relative to neat PBSA because of the presence of MWCNTs; however, the crystal structure of PBSA remained unchanged. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Poly(butylene succinate)/layered double hydroxide bionanocomposites: Relationships between chemical structure of LDH anion,delamination strategy,and final properties

A series of poly(butylene succinate) (PBS) containing organo‐modified layered double hydroxide (LDH) are prepared by melt compounding and by in situ polymerization of succinic ester and 1,4‐butanediol. Various LDHs intercalated with renewable organic anions are used. More specifically, lauryl sulfate, stearate, succinate, adipate, sebacate, citrate, and ricinoleate ions are used as LDHs organo‐modifiers. The thermal, rheological, and dynamic mechanical properties of the samples are investigated. The results reveal a general mechanical reinforcement imparted by the clays. Significant changes are observed for the in situ polymerized nanocomposites, especially for LDH stearate which improves the properties of PBS nanostructure, whereas very few differences are observed for the other samples. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1931–1940, 2013     

Synthesis of novel biodegradable poly(butylene succinate) copolyesters composing of isosorbide and poly(ethylene glycol)

A series of biodegradable isosorbide‐based copolyesters poly(butylene succinate‐co‐isosorbide succinate‐co‐polyethyleneoxide succinate) (PB_xI_yE_zS) were synthesized via bulk polycondensation in the presence of dimethyl succinate (DMS), 1,4‐butanediol (BDO), poly(ethylene glycol) (PEG) and isosorbide (ISO). The crystallization behaviors, crystal structure and spherulite morphology of the copolyesters were analyzed by differential scanning calorimetry (DSC), wide angle X‐ray diffraction (WAXD) and polarizing optical microscopy (POM), respectively. The results indicate that the crystallization behavior of the copolyesters was influenced by the content of isosorbide succinate (IS) and polyethyleneoxide succinate (PEOS) units, which further tuned the mechanical and biodegradable properties of the copolyesters. The PB_xI_yE_zS copolyesters, compared to pure poly(butylene succinate), showed lower crystallization temperature, melting temperature, degree of crystallinity and degradation rate while a significant increase in glass transition temperature with increasing isosorbide content. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Catalyzed chain extension of poly(butylene adipate) and poly(butylene succinate) with 2,2′‐(1,4‐phenylene)‐bis(2‐oxazoline)

Low‐molecular‐weight HOOC‐terminated poly(butylene adipate) prepolymer (PrePBA) and poly(butylene succinate) prepolymer (PrePBS) were synthesized through melt‐condensation polymerization from adipic acid or succinic acid with butanediol. The catalyzed chain extension of these prepolymers was carried out at 180–220°C with 2,2′‐(1,4‐phenylene)‐bis(2‐oxazoline) as a chain extender and p‐toluenesulfonic acid (p‐TSA) as a catalyst. Higher molecular weight polyesters were obtained from the catalyzed chain extension than from the noncatalyzed one. However, an improperly high amount of p‐TSA and a high temperature caused branching or a crosslinking reaction. Under optimal conditions, chain‐extended poly(butylene adipate) (PBA) with a number‐average molecular weight up to 29,600 and poly(butylene succinate) (PBS) with an intrinsic viscosity of 0.82 dL/g were synthesized. The chain‐extended polyesters were characterized by IR spectroscopy, ¹H‐NMR spectroscopy, differential scanning calorimetry (DSC), thermogravimetric analysis, wide‐angle X‐ray scattering, and tensile testing. DSC, wide‐angle X‐ray scattering, and thermogravimetric analysis characterization showed that the chain‐extended PBA and PBS had lower melting temperatures and crystallinities and slower crystallization rates and were less thermally stable than PrePBA and PrePBS. This deterioration of their properties was not harmful enough to impair their thermal processing properties and should not prevent them from being used as biodegradable thermoplastics. The tensile strength of the chain‐extended PBS was about 31.05 MPa. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010