An Assumed Strain Triangular Solid Element for Efficient Analysis of Plates and Shells with Finite Rotation

A simple triangular solid shell element formulation is developed for efficient analysis of plates and shells undergoing finite rotations. The kinematics of the present solid shell element formulation is purely vectorial with only three translational degrees of freedom per node. Accordingly, the kinematics of deformation is free of the limitation of small angle increments, and thus the formulation allows large load increments in the analysis of finite rotation. An assumed strain field is carefully selected to alleviate the locking effect without triggering undesirable spurious kinematic modes. In addition, the curved surface of shell structures is modeled with flat facet elements to obviate the membrane locking effect. Various numerical examples demonstrate the efficiency and accuracy of the present element formulation for the analysis of plates and shells undergoing finite rotation. The present formulation is attractive in that only three points are needed for numerical integration over an element.     

发展基于CB壳单元的扩展有限元模拟三维任意扩展裂纹

该文提出了一种新的基于连续体壳单元的扩展有限元格式,以用于对曲面上任意形状裂纹的扩展问题进行模拟。扩充形函数的构造和应力强度因子的计算都是基于三维实体单元进行,因此可以模拟复杂的三维断裂情况,壳体厚度的变化也可以得到考虑。三维应力强度因子的计算公式被引入到这种方法中。为模拟裂纹扩展,三维最大能量释放率准则被用作裂纹扩展准则。计算结果显示了曲面上的裂纹扩展路径可以与网格无关,并且由于在裂纹尖端的单元设置了具有奇异性的形函数,裂尖应力场被精确捕捉,从而证明了这种方法的优越性。     

Modeling arbitrary crack propagation in coupled shell/solid structures with X‐FEM

In this paper, the extended finite element method (X‐FEM) formulation for the modeling of arbitrary crack propagation in coupled shell/solid structures is developed based on the large deformation continuum‐based (CB) shell theory. The main features of the new method are as follows: (1) different kinematic equations are derived for different fibers in CB shell elements, including the fibers enriched by shifted jump function or crack tip functions and the fibers cut into two segments by the crack surface or connecting with solid elements. So the crack tip can locate inside the element, and the crack surface is not necessarily perpendicular to the middle surface. (2) The enhanced CB shell element is developed to realize the seamless transition of crack propagation between shell and solid structures. (3) A revised interaction integral is used to calculate the stress intensity factor (SIF) for shells, which avoids that the auxiliary fields for cracks in Mindlin–Reissner plates cannot satisfy exactly the equilibrium equations. Several numerical examples, including the calculation of SIF for the cracked plate under uniform bending and crack propagation between solid and shell structures are presented to demonstrate the performance of the developed method. Copyright © 2015 John Wiley & Sons, Ltd.     

An assumed strain triangular curved solid shell element formulation for analysis of plates and shells undergoing finite rotations

A formulation for 36‐DOF assumed strain triangular solid shell element is developed for efficient analysis of plates and shells undergoing finite rotations. Higher order deformation modes described by the bubble function displacements are added to the assumed displacement field. The assumed strain field is carefully selected to alleviate locking effect. The resulting element shows little effect of membrane locking as well as shear locking, hence, it allows modelling of curved shell structures with curved elements. The kinematics of the present formulation is purely vectorial with only three translational degrees of freedom per node. Accordingly, the present element is free of small angle assumptions, and thus it allows large load increments in the geometrically non‐linear analysis. Various numerical examples demonstrate the validity and effectiveness of the present formulation. Copyright © 2001 John Wiley & Sons, Ltd.     

Ductile damage analysis of elasto‐plastic shells at large inelastic strains

The objective of this contribution is to model ductile damage phenomena under consideration of large inelastic strains, to couple the corresponding constitutive law with a multi‐layer shell kinematics and to give finally an adequate finite element formulation. An elastic–plastic constitutive law is formulated by using a spatial hyperelasto‐plastic formulation based on the multiplicative decomposition of the deformation gradient. To include isotropic ductile damage the continuum damage model of Rousselier is modified so as to consider large strains and additionally extended by various void nucleation and macro‐crack criteria. In order to achieve numerical efficiency, elastic strains are supposed to be sufficiently small providing a numerical effective integration based on the backward Euler rule. Finite element formulation is enriched by means of the enhanced strain concept. Thus the well‐known deficiencies due to incompressible deformations and the inclusion of transverse strains are avoided. Several examples are given to demonstrate the performance of the algorithms developed concerning large inelastic strains of shells and ductile damage phenomena. Copyright © 2000 John Wiley & Sons, Ltd.     

Dynamic crack propagation in elastoplastic thin‐walled structures: Modelling and validation

In this paper, a method to analyse and predict crack propagation in thin‐walled structures subjected to large plastic deformations when loaded at high strain rates—such as impact and/or blast—has been proposed. To represent the crack propagation independently of the finite element discretisation, an extended finite element method based shell formulation has been employed. More precisely, an underlying 7‐parameter shell model formulation with extensible directors has been extended by locally introducing an additional displacement field, representing the displacement discontinuity independently of the mesh. Of special concern in the paper has been to find a proper balance between, level of detail and accuracy when representing the physics of the problem and, on the other hand, computational efficiency and robustness. To promote computational efficiency, an explicit time step scheme has been employed, which however has been discovered to generate unphysical oscillations in the response upon crack propagation. Therefore, special focus has been placed to investigate these oscillations as well as to find proper remedies. The paper is concluded with three numerical examples to verify and validate the proposed model.Copyright © 2013 John Wiley & Sons, Ltd.     

Finite strain fracture analysis using the extended finite element method with new set of enrichment functions

Nonlinear fracture analysis of rubber‐like materials is computationally challenging due to a number of complicated numerical problems. The aim of this paper is to study finite strain fracture problems based on appropriate enrichment functions within the extended finite element method. Two‐dimensional static and quasi‐static crack propagation problems are solved to demonstrate the efficiency of the proposed method. Complex mixed‐mode problems under extreme large deformation regimes are solved to evaluate the performance of the proposed extended finite element analysis based on different tip enrichment functions. Finally, it is demonstrated that the logarithmic set of enrichment functions provides the most accurate and efficient solution for finite strain fracture analysis. Copyright © 2015 John Wiley & Sons, Ltd.     

Nonlinear rotation‐free three‐node shell finite element formulation

A new triangular thin‐shell finite element formulation is presented, which employs only translational degrees of freedom. The formulation allows for large deformations, and it is based on the nonlinear Kirchhoff thin‐shell theory. A number of static and dynamic test problems are considered for which analytical or benchmark solutions exist. Comparisons between the predictions of the new model and these solutions show that the new model accurately reproduces complex nonlinear analytical solutions as well as solutions obtained using existing, more complex finite element formulations. Copyright © 2013 John Wiley & Sons, Ltd.     

Finite element formulation of the Ogden material model with application to rubber-like shells

The present contribution proposes a variational procedure for the numerical implementation of the Ogden material model. For this purpose the strain energy density originally formulated in terms of the principal stretches is transformed as variational quantities into the invariants of the right Cauchy–Green tensor. This formulation holds for arbitrary three-dimensional deformations and requires neither solving eigenvalue problems nor co-ordinate system transformations. Particular attention is given to the consideration of special cases with coinciding eigenvalues. For the analysis of rubber-like shells this material model is then coupled with a six parametric shells kinematics able to deal with large strains and finite rotations. The incompressibility condition is considered in the strain energy, but it is additionally used as 2-D constraint for the elimination of the stretching parameter at the element level. A four node isoparametric finite element is developed by interpolating the transverse shear strains according to assumed strain concept. Finally, examples are given permitting to discuss the capability of the finite element model developed concerning various aspects. © 1998 John Wiley & Sons, Ltd.     

A full‐discontinuous Galerkin formulation of nonlinear Kirchhoff–Love shells: elasto‐plastic finite deformations,parallel computation,and fracture applications

Because of its ability to take into account discontinuities, the discontinuous Galerkin (DG) method presents some advantages for modeling cracks initiation and propagation. This concept has been recently applied to three‐dimensional simulations and to elastic thin bodies. In this last case, the assumption of small elastic deformations before cracks initiation or propagation reduces drastically the applicability of the framework to a reduced number of materials. To remove this limitation, a full‐DG formulation of nonlinear Kirchhoff–Love shells is presented and is used in combination with an elasto‐plastic finite deformations model. The results obtained by this new formulation are in agreement with other continuum elasto‐plastic shell formulations. Then, this full‐DG formulation of Kirchhoff–Love shells is coupled with the cohesive zone model to perform thin body fracture simulations. As this method considers elasto‐plastic constitutive laws in combination with the cohesive model, accurate results compared with the experiments are found. In particular, the crack path and propagation rate of a blasted cylinder are shown to match experimental results. One of the main advantages of this framework is its ability to run in parallel with a high speed‐up factor, allowing the simulation of ultra fine meshes. Copyright © 2012 John Wiley & Sons, Ltd.     

Four‐node semi‐EAS element in six‐field nonlinear theory of shells

We propose a new four‐node C⁰ finite element for shell structures undergoing unlimited translations and rotations. The considerations concern the general six‐field theory of shells with asymmetric strain measures in geometrically nonlinear static problems. The shell kinematics is of the two‐dimensional Cosserat continuum type and is described by two independent fields: the vector field for translations and the proper orthogonal tensor field for rotations. All three rotational parameters are treated here as independent. Hence, as a consequence of the shell theory, the proposed element has naturally six engineering degrees of freedom at each node, with the so‐called drilling rotation. This property makes the element suitable for analysis of shell structures containing folds, branches or intersections. To avoid locking phenomena we use the enhanced assumed strain (EAS) concept. We derive and linearize the modified Hu–Washizu principle for six‐field theory of shells. What makes the present approach original is the combination of EAS method with asymmetric membrane strain measures. Based on literature, we propose new enhancing field and specify the transformation matrix that accounts for the lack of symmetry. To gain knowledge about the suitability of this field for asymmetric strain measures and to assess the performance of the element, we solve typical benchmark examples with smooth geometry and examples involving orthogonal intersections of shell branches. Copyright © 2006 John Wiley & Sons, Ltd.     

A FEM model for the active control of curved FGM shells using piezoelectric sensor/actuator layers

In this paper, a generic finite element formulation is developed for the static and dynamic control of FGM (functionally graded material) shells with piezoelectric sensor and actuator layers. The properties of the FGM shell are graded in the thickness direction according to a volume fraction power‐law distribution. The proposed finite element model is based on variational principle and linear piezoelectricity theory. A constant displacement and velocity feedback control algorithm coupling the direct and inverse piezoelectric effects is applied in a closed‐loop system to provide feedback control of the integrated FGM shell structure. Both static and dynamic control of FGM shells are simulated to demonstrate the effectiveness of the proposed active control scheme within a framework of finite element discretization and piezoelectric integration. Copyright © 2002 John Wiley & Sons, Ltd.     

A contact algorithm for frictional crack propagation with the extended finite element method

We present an incremental quasi‐static contact algorithm for path‐dependent frictional crack propagation in the framework of the extended finite element (FE) method. The discrete formulation allows for the modeling of frictional contact independent of the FE mesh. Standard Coulomb plasticity model is introduced to model the frictional contact on the surface of discontinuity. The contact constraint is borrowed from non‐linear contact mechanics and embedded within a localized element by penalty method. Newton–Raphson iteration with consistent linearization is used to advance the solution. We show the superior convergence performance of the proposed iterative method compared with a previously published algorithm called ‘LATIN’ for frictional crack propagation. Numerical examples include simulation of crack initiation and propagation in 2D plane strain with and without bulk plasticity. In the presence of bulk plasticity, the problem is also solved using an augmented Lagrangian procedure to demonstrate the efficacy and adequacy of the standard penalty solution. Copyright © 2008 John Wiley & Sons, Ltd.     

Isogeometric FEM‐BEM coupled structural‐acoustic analysis of shells using subdivision surfaces

We introduce a coupled finite and boundary element formulation for acoustic scattering analysis over thin‐shell structures. A triangular Loop subdivision surface discretisation is used for both geometry and analysis fields. The Kirchhoff‐Love shell equation is discretised with the finite element method and the Helmholtz equation for the acoustic field with the boundary element method. The use of the boundary element formulation allows the elegant handling of infinite domains and precludes the need for volumetric meshing. In the present work, the subdivision control meshes for the shell displacements and the acoustic pressures have the same resolution. The corresponding smooth subdivision basis functions have the C¹ continuity property required for the Kirchhoff‐Love formulation and are highly efficient for the acoustic field computations. We verify the proposed isogeometric formulation through a closed‐form solution of acoustic scattering over a thin‐shell sphere. Furthermore, we demonstrate the ability of the proposed approach to handle complex geometries with arbitrary topology that provides an integrated isogeometric design and analysis workflow for coupled structural‐acoustic analysis of shells.     

Simulation of crack growth in composite material shell structures

This paper implements a domain integral energy method for modelling crack growth in composite material shell structures using the finite element method. Volume integral expressions to evaluate the dynamic energy release rate in a through‐thickness three‐dimensional crack are derived. Using the domain integral, the energy release rate computation is implemented in the DYNA3D explicit non‐linear dynamic finite element analysis program wherein crack propagation is modelled by releasing the constraints between initially constrained node pairs. The implementation enables the program to either determine the energy resistance response for the material (provided experimental data is available) or predict the rate of crack propagation in shell structures. The numerical implementation was verified by simulating mode I and mode III slow crack growth problems in semi‐infinite transversely isotropic media, for which analytic solutions are available. Oscillations of energy following the release of nodal constraints as the crack propagates in discrete increments were suppressed using light mass proportional damping and a moving averaging scheme. Copyright © 2004 John Wiley & Sons, Ltd.     

Energy and momentum conserving elastodynamics of a non‐linear brick‐type mixed finite shell element

The paper presents aspects of the finite element formulation of momentum and energy conserving algorithms for the non‐linear dynamic analysis of shell‐like structures. The key contribution is a detailed analysis of the implementation of a Simó–Tarnow‐type conservation scheme in a recently developed new mixed finite shell element. This continuum‐based shell element provides a well‐defined interface to strain‐driven constitutive stress updates algorithms. It is based on the classic brick‐type trilinear displacement element and is equipped with specific gradient‐type enhanced strain modes and shell‐typical assumed strain modifications. The excellent performance of the proposed dynamic shell formulation with respect to conservation properties and numerical stability behaviour is demonstrated by means of three representative numerical examples of elastodynamics which exhibit complex free motions of flexible structures undergoing large strains and large rigid‐body motions. Copyright © 2001 John Wiley & Sons, Ltd.     

Analysis of three‐dimensional crack initiation and propagation using the extended finite element method

An Erratum has been published for this article in International Journal for Numerical Methods in Engineering 2005, 63(8): 1228. We present a new formulation and a numerical procedure for the quasi‐static analysis of three‐dimensional crack propagation in brittle and quasi‐brittle solids. The extended finite element method (XFEM) is combined with linear tetrahedral elements. A viscosity‐regularized continuum damage constitutive model is used and coupled with the XFEM formulation resulting in a regularized ‘crack‐band’ version of XFEM. The evolving discontinuity surface is discretized through a C⁰ surface formed by the union of the triangles and quadrilaterals that separate each cracked element in two. The element's properties allow a closed form integration and a particularly efficient implementation allowing large‐scale 3D problems to be studied. Several examples of crack propagation are shown, illustrating the good results that can be achieved. Copyright © 2005 John Wiley & Sons, Ltd.