Ni‐Fe Nitride Nanoplates on Nitrogen‐Doped Graphene as a Synergistic Catalyst for Reversible Oxygen Evolution Reaction and Rechargeable Zn‐Air Battery

Obtaining bifunctional electrocatalysts with high activity for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is a main hurdle in the application of rechargeable metal‐air batteries. Earth‐abundant 3d transition metal‐based catalysts have been developed for the OER and ORR; however, most of these are based on oxides, whose insulating nature strongly restricts their catalytic performance. This study describes a metallic Ni‐Fe nitride/nitrogen‐doped graphene hybrid in which 2D Ni‐Fe nitride nanoplates are strongly coupled with the graphene support. Electronic structure of the Ni‐Fe nitride is changed by hybridizing with the nitrogen‐doped graphene. The unique heterostructure of this hybrid catalyst results in very high OER activity with the lowest onset overpotential (150 mV) reported, and good ORR activity comparable to that for commercial Pt/C. The high activity and durability of this bifunctional catalyst are also confirmed in rechargeable zinc‐air batteries that are stable for 180 cycles with an overall overpotential of only 0.77 V at 10 mA^?2.     

Well‐Combined Magnetically Separable Hybrid Cobalt Ferrite/Nitrogen‐Doped Graphene as Efficient Catalyst with Superior Performance for Oxygen Reduction Reaction

Catalysts with low‐cost, high activity and stability toward oxygen reduction reaction (ORR) are extremely desirable, but its development still remains a great challenge. Here, a novel magnetically separable hybrid of multimetal oxide, cobalt ferrite (CoFe₂O₄), anchored on nitrogen‐doped reduced graphene oxide (CoFe₂O₄/NG) is prepared via a facile solvothermal method followed by calcination at 500 °C. The structure of CoFe₂O₄/NG and the interaction of both components are analyzed by several techniques. The possible formation of Co/Fe N interaction in the CoFe₂O₄/NG catalyst is found. As a result, the well‐combination of CoFe₂O₄ nanoparticles with NG and its improved crystallinity lead to a synergistic and efficient catalyst with high performance to ORR through a four‐electron‐transfer process in alkaline medium. The CoFe₂O₄/NG exhibits particularly comparable catalytic activity as commercial Pt/C catalyst, and superior stability against methanol oxidation and CO poisoning. Meanwhile, it has been proved that both nitrogen doping and the spinel structure of CoFe₂O₄ can have a significant contribution to the catalytic activity by contrast experiments. Multimetal oxide hybrid demonstrates better catalysis to ORR than a single metal oxide hybrid. All results make the low‐cost and magnetically separable CoFe₂O₄/NG a promising alternative for costly platinum‐based ORR catalyst in fuel cells and metal‐air batteries.     

Atomic Fe Dispersed on N‐Doped Carbon Hollow Nanospheres for High‐Efficiency Electrocatalytic Oxygen Reduction

Exploration of high‐efficiency, economical, and ultrastable electrocatalysts for the oxygen reduction reaction (ORR) to substitute precious Pt is of great significance in electrochemical energy conversion devices. Single‐atom catalysts (SACs) have sparked tremendous interest for their maximum atom‐utilization efficiency and fascinating properties. Therefore, the development of effective synthetic methodology toward SACs becomes highly imperative yet still remains greatly challenging. Herein, a reliable SiO₂‐templated strategy is elaborately designed to synthesize atomically dispersed Fe atoms anchored on N‐doped carbon nanospheres (denoted as Fe–N–C HNSs) using the cheap and sustainable biomaterial of histidine (His) as the N and C precursor. By virtue of the numerous atomically dispersed Fe–N₄ moieties and unique spherical hollow architecture, the as‐fabricated Fe–N–C HNSs exhibit excellent ORR performance in alkaline medium with outstanding activity, high long‐term stability, and superior tolerance to methanol crossover, exceeding the commercial Pt/C catalyst and most previously reported non‐precious‐metal catalysts. This present synthetic strategy will provide new inspiration to the fabrication of various high‐efficiency single‐atom catalysts for diverse applications.     

Sustainable Hydrothermal Carbonization Synthesis of Iron/Nitrogen‐Doped Carbon Nanofiber Aerogels as Electrocatalysts for Oxygen Reduction

It is urgent to develop new kinds of low‐cost and high‐performance nonprecious metal (NPM) catalysts as alternatives to Pt‐based catalysts for oxygen reduction reaction (ORR) in fuel cells and metal–air batteries, which have been proved to be efficient to meet the challenge of increase of global energy demand and CO₂ emissions. Here, an economical and sustainable method is developed for the synthesis of Fe, N codoped carbon nanofibers (Fe–N/CNFs) aerogels as efficient NPM catalysts for ORR via a mild template‐directed hydrothermal carbonization (HTC) process, where cost‐effective biomass‐derived d (+)‐glucosamine hydrochloride and ferrous gluconate are used as precursors and recyclable ultrathin tellurium nanowires are used as templates. The prepared Fe/N‐CNFs catalysts display outstanding ORR activity, i.e., onset potential of 0.88 V and half‐wave potential of 0.78 V versus reversible hydrogen electrode in an alkaline medium, which is highly comparable to that of commercial Pt/C (20 wt% Pt) catalyst. Furthermore, the Fe/N‐CNFs catalysts exhibit superior long‐term stability and better tolerance to the methanol crossover effect than the Pt/C catalyst in both alkaline and acidic electrolytes. This work suggests the great promise of developing new families of NPM ORR catalysts by the economical and sustainable HTC process.     

Boosting Bifunctional Oxygen Electrocatalysis with 3D Graphene Aerogel‐Supported Ni/MnO Particles

Electrocatalysts for oxygen‐reduction and oxygen‐evolution reactions (ORR and OER) are crucial for metal–air batteries, where more costly Pt‐ and Ir/Ru‐based materials are the benchmark catalysts for ORR and OER, respectively. Herein, for the first time Ni is combined with MnO species, and a 3D porous graphene aerogel‐supported Ni/MnO (Ni–MnO/rGO aerogel) bifunctional catalyst is prepared via a facile and scalable hydrogel route. The synthetic strategy depends on the formation of a graphene oxide (GO) crosslinked poly(vinyl alcohol) hydrogel that allows for the efficient capture of highly active Ni/MnO particles after pyrolysis. Remarkably, the resulting Ni–MnO/rGO aerogels exhibit superior bifunctional catalytic performance for both ORR and OER in an alkaline electrolyte, which can compete with the previously reported bifunctional electrocatalysts. The MnO mainly contributes to the high activity for the ORR, while metallic Ni is responsible for the excellent OER activity. Moreover, such bifunctional catalyst can endow the homemade Zn–air battery with better power density, specific capacity, and cycling stability than mixed Pt/C + RuO₂ catalysts, demonstrating its potential feasibility in practical application of rechargeable metal–air batteries.     

MOF‐Based Metal‐Doping‐Induced Synthesis of Hierarchical Porous CuN/C Oxygen Reduction Electrocatalysts for Zn–Air Batteries

A transition‐metal–nitrogen/carbon (TM–N/C, TM = Fe, Co, Ni, etc.) system is a popular, nonprecious‐metal oxygen reduction reaction (ORR) electrocatalyst for fuel cell and metal–air battery applications. However, there remains a lack of comprehensive understanding about the ORR electrocatalytic mechanism on these catalysts, especially the roles of different forms of metal species on electrocatalytic performance. Here, a novel Cu?N/C ORR electrocatalyst with a hybrid Cu coordination site is successfully fabricated with a simple but efficient metal–organic‐framework‐based, metal‐doping‐induced synthesis strategy. By directly pyrolyzing Cu‐doped zeolitic‐imidazolate‐framework‐8 polyhedrons, the obtained Cu?N/C catalyst can achieve a high specific surface area of 1182 m² g^?1 with a refined hierarchical porous structure and a high surface N content of 11.05 at%. Moreover, regulating the Cu loading can efficiently tune the states of Cu(II) and Cu⁰, resulting in the successful construction of a highly active hybrid coordination site of N?Cu(II)?Cu⁰ in derived Cu?N/C catalysts. As a result, the optimized 25% Cu?N/C catalyst possesses a high ORR activity and stability in 0.1 m KOH solution, as well as excellent performance and stability in a Zn–air battery.     

Cobalt Phosphide Coupled with Heteroatom‐Doped Nanocarbon Hybrid Electroctalysts for Efficient,Long‐Life Rechargeable Zinc–Air Batteries

Metal phosphides and heteroatom‐doped carbons have been regarded as promising candidates as bifunctional catalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). However, both have suffered from stability issues during repeated ORR and OER operations in zinc–air batteries (ZABs). Herein, this study reports a versatile cobalt‐based hybrid catalyst with a 1D structure by integrating the metal‐organic framework‐derived conversion approach and an in situ crosslinking method. Among them, the 1D hybrid catalyst composed of ultrasmall cobalt phosphide nanoparticles supported by nitrogen‐, sulfur‐, phosphorus‐doped carbon matrix shows remarkable bifunctional activity close to that of the benchmark precious‐metal catalysts along with an excellent durability in the full potential range covering both the OER and ORR. The overall overpotential of the rechargeable ZABs can be greatly reduced with this bifunctional hybrid catalyst as an air‐electrode, and the cycling stability outperforms the commercial Pt/C catalyst. It is revealed that the cobalt phosphide nanoparticles are in situ converted to cobalt oxide under the accelerated conditions during OER (and/or ORR) of the ZABs and reduces the anodic current applied to the carbon. This contributes to the stability of the carbon material and in maintaining the high initial catalytic properties of the hybrid catalyst.     

Porous Hollow‐Structured LaNiO3 Stabilized N,S‐Codoped Graphene as an Active Electrocatalyst for Oxygen Reduction Reaction

A nanohybrid based on porous and hollow interior structured LaNiO₃ stabilized nitrogen and sulfur codoped graphene (LaNiO₃/N,S‐Gr) is successfully synthesized for the first time. Such a nanohybrid as an electrocatalyst shows high catalytic activity for oxygen reduction reaction (ORR) in O₂‐saturated 0.1 m KOH media. In addition, it demonstrates a comparable catalytic activity, longer working stability, and much better alcohol tolerance compared with commercial Pt/C behavior in same experiment condition. The obtained results are attributed to synergistic effects from the enhanced electrocatalytic active sites on the rich pore channels of porous hollow‐structured LaNiO₃ spheres and heteroatom doped efficiency on graphene structure. In addition, N,S‐Gr can meritoriously stabilize monodispersion of the LaNiO₃ spheres, and act as medium bridging for high electrical conductivity, thereby providing large active surface area for O₂ adsorption, accelerating reduction reaction, and improving electrochemical stability. Such a hybrid opens an interesting class of highly efficient non‐Pt catalysts for ORR in alkaline media.     

Electrocatalytic N‐Doped Graphitic Nanofiber – Metal/Metal Oxide Nanoparticle Composites

Carbon‐based nanocomposites have shown promising results in replacing commercial Pt/C as high‐performance, low cost, nonprecious metal‐based oxygen reduction reaction (ORR) catalysts. Developing unique nanostructures of active components (e.g., metal oxides) and carbon materials is essential for their application in next generation electrode materials for fuel cells and metal–air batteries. Herein, a general approach for the production of 1D porous nitrogen‐doped graphitic carbon fibers embedded with active ORR components, (M/MO_x, i.e., metal or metal oxide nanoparticles) using a facile two‐step electrospinning and annealing process is reported. Metal nanoparticles/nanoclusters nucleate within the polymer nanofibers and subsequently catalyze graphitization of the surrounding polymer matrix and following oxidation, create an interconnected graphite–metal oxide framework with large pore channels, considerable active sites, and high specific surface area. The metal/metal oxide@N‐doped graphitic carbon fibers, especially Co₃O₄, exhibit comparable ORR catalytic activity but superior stability and methanol tolerance versus Pt in alkaline solutions, which can be ascribed to the synergistic chemical coupling effects between Co₃O₄ and robust 1D porous structures composed of interconnected N‐doped graphitic nanocarbon rings. This finding provides a novel insight into the design of functional electrocatalysts using electrospun carbon nanomaterials for their application in energy storage and conversion fields.     

Bio‐Derived Co2P Nanoparticles Supported on Nitrogen‐Doped Carbon as Promising Oxygen Reduction Reaction Electrocatalyst for Anion Exchange Membrane Fuel Cells

Recently, nonnoble‐metal catalysts such as a metal coordinated to nitrogen doped in a carbon matrix have been reported to exhibit superior oxygen reduction reaction (ORR) activity in alkaline media. In this work, Co₂P nanoparticles supported on heteroatom‐doped carbon catalysts (NBSCP) are developed with an eco‐friendly synthesis method using bean sprouts. NBSCP can be easily synthesized through metal precursor absorption and carbonization at a high temperature. It shows a very large specific surface area with various dopants such as nitrogen, phosphorus, and sulfur derived from small organic molecules. The catalyst can exhibit activity in various electrochemical reactions. In particular, excellent performance is noted for the ORR. Compared to the commercial Pt/C, NBSCP exhibits a lower onset potential, higher current density, and superior durability. This excellent ORR activity and durability is attributable to the synergistic effect between Co₂P nanoparticles and nitrogen‐doped carbon. In addition, superior performance is noted on applying NBSCP to a practical anion exchange membrane fuel cell system. Through this work, the possibility of applying an easily obtained bio‐derived material to energy conversion and storage systems is demonstrated.     

Sphere‐to‐Multipod Transmorphic Change of Nanoconfined Pt Electrocatalyst during Oxygen Reduction Reaction

An oxygen reduction reaction (ORR) catalyst/support system is designed to have Pt nanoparticles nanoconfined in a nanodimensionally limited space. Holey crumpled reduced graphene oxide plates (hCR‐rGO) are used as a carbon support for Pt loading. As expected from interparticular Pt‐to‐Pt distance of Pt‐loaded hCR‐rGO longer than that of Pt/C (Pt‐loaded carbon black as a practical Pt catalyst), the durability of ORR electroactivity along cycles is improved by replacing the widely used carbon black with hCR‐rGO. Unexpected morphological changes of Pt are electrochemically induced during repeated ORR processes. Spherical multifaceted Pt particles are evolved to {110}‐dominant dendritic multipods. Nanoconfinement of a limited number of Pt within a nanodimensionally limited space is responsible for the morphological changes. The improved durability observed from Pt‐loaded hCR‐rGO originates from 1) dendritic pod structure of Pt exposing more active sites to reactants and 2) highly ORR‐active Pt {110} planes dominant on the surface.     

A Prussian blue route to nitrogen-doped graphene aerogels as efficient electrocatalysts for oxygen reduction with enhanced active site accessibility

Developing high-performance nonpredous-metal electrocatalysts for the oxygen reduction reaction (ORR) is crudal for a variety of renewable energy conversion and storage systems.Toward that end,rational catalyst design principles that lead to highly active catalytic centers and enhanced active site accessibility are undoubtedly of paramount importance.Here,we used Prussian blue nanoparticles to anchor Fe/Fe3C species to nitrogen-doped reduced graphene oxide aerogels as ORR catalysts.The strong interaction between nanosized Fe3C and the graphitic carbon shell led to synergistic effects in the ORR,and the protection of the carbon shell guaranteed stability of the catalyst.As a result,the aerogel electrocatalyst displayed outstanding activity in the ORR on par with the state-of-the-art Pt/C catalyst at the same mass loading in alkaline media,good performance in acidic media,and excellent stability and crossover tolerance that rivaled that of the best nonprecious-metal ORR electrocatalysts reported to date.     

Active Sites and Mechanism of Oxygen Reduction Reaction Electrocatalysis on Nitrogen‐Doped Carbon Materials

The oxygen reduction reaction (ORR) is a core reaction for electrochemical energy technologies such as fuel cells and metal–air batteries. ORR catalysts have been limited to platinum, which meets the requirements of high activity and durability. Over the last few decades, a variety of materials have been tested as non‐Pt catalysts, from metal–organic complex molecules to metal‐free catalysts. In particular, nitrogen‐doped graphitic carbon materials, including N‐doped graphene and N‐doped carbon nanotubes, have been extensively studied. However, due to the lack of understanding of the reaction mechanism and conflicting knowledge of the catalytic active sites, carbon‐based catalysts are still under the development stage of achieving a performance similar to Pt‐based catalysts. In addition to the catalytic viewpoint, designing mass transport pathways is required for O₂. Recently, the importance of pyridinic N for the creation of active sites for ORR and the requirement of hydrophobicity near the active sites have been reported. Based on the increased knowledge in controlling ORR performances, bottom‐up preparation of N‐doped carbon catalysts, using N‐containing conjugative molecules as the assemblies of the catalysts, is promising. Here, the recent understanding of the active sites and the mechanism of ORRs on N‐doped carbon catalysts are reviewed.     

Reduced Graphene Oxide‐Wrapped Co9–xFexS8/Co,Fe‐N‐C Composite as Bifunctional Electrocatalyst for Oxygen Reduction and Evolution

Searching for highly efficient bifunctional electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) using nonnoble metal‐based catalysts is essential for the development of many energy conversion systems, including rechargeable fuel cells and metal–air batteries. Here, Co_9–xFe_xS₈/Co,Fe‐N‐C hybrids wrapped by reduced graphene oxide (rGO) (abbreviated as S‐Co_9–xFe_xS₈@rGO) are synthesized through a semivulcanization and calcination method using graphene oxide (GO) wrapped bimetallic zeolite imidazolate framework (ZIF) Co,Fe‐ZIF (CoFe‐ZIF@GO) as precursors. Benefiting from the synergistic effect of OER active CoFeS and ORR active Co,Fe‐N‐C in a single component, as well as high dispersity and enhanced conductivity derived from rGO coating and Fe‐doping, the obtained S‐Co_9–xFe_xS₈@rGO‐10 catalyst shows an ultrasmall overpotential of ≈0.29 V at 10 mA cm^?2 in OER and a half‐wave potential of 0.84 V in ORR, combining a superior oxygen electrode activity of ≈0.68 V in 0.1 m KOH.     

Promoted Glycerol Oxidation Reaction in an Interface‐Confined Hierarchically Structured Catalyst

Confined catalysis in a 2D system is of particular interest owing to the facet control of the catalysts and the anisotropic kinetics of reactants, which suppress side reactions and improve selectivity. Here, a 2D‐confined system consisting of intercalated Pt nanosheets within few‐layered graphene is demonstrated. The strong metal–substrate interaction between the Pt nanosheets and the graphene leads to the quasi‐2D growth of Pt with a unique (100)/(111)/(100) faceted structure, thus providing excellent catalytic activity and selectivity toward one‐carbon (C1) products for the glycerol oxidation reaction. A hierarchically porous graphene architecture, grown on carbon cloth, is used to fabricate the confined catalyst bed in order to enhance the mass‐diffusion limitation in interface‐confined reactions. Owing to its unique 3D porous structure, this graphene‐confined Pt catalyst exhibits an extraordinary mass activity of 2910 mA mg_Pt ^?1 together with a formate selectivity of 79% at 60 °C. This paves the way toward rational designs of heterogeneous catalysts for energy‐related applications.     

O‐, N‐Atoms‐Coordinated Mn Cofactors within a Graphene Framework as Bioinspired Oxygen Reduction Reaction Electrocatalysts

Manganese (Mn) is generally regarded as not being sufficiently active for the oxygen reduction reaction (ORR) compared to other transition metals such as Fe and Co. However, in biology, manganese‐containing enzymes can catalyze oxygen‐evolving reactions efficiently with a relative low onset potential. Here, atomically dispersed O and N atoms coordinated Mn active sites are incorporated within graphene frameworks to emulate both the structure and function of Mn cofactors in heme–copper oxidases superfamily. Unlike previous single‐metal catalysts with general M‐N‐C structures, here, it is proved that a coordinated O atom can also play a significant role in tuning the intrinsic catalytic activities of transition metals. The biomimetic electrocatalyst exhibits superior performance for the ORR and zinc–air batteries under alkaline conditions, which is even better than that of commercial Pt/C. The excellent performance can be ascribed to the abundant atomically dispersed Mn cofactors in the graphene frameworks, confirmed by various characterization methods. Theoretical calculations reveal that the intrinsic catalytic activity of metal Mn can be significantly improved via changing local geometry of nearest coordinated O and N atoms. Especially, graphene frameworks containing the Mn‐N₃O₁ cofactor demonstrate the fastest ORR kinetics due to the tuning of the d electronic states to a reasonable state.     

ZIF‐8 with Ferrocene Encapsulated: A Promising Precursor to Single‐Atom Fe Embedded Nitrogen‐Doped Carbon as Highly Efficient Catalyst for Oxygen Electroreduction

The oxygen reduction reaction (ORR) plays an important role in the fields of energy storage and conversion technologies, including metal–air batteries and fuel cells. The development of nonprecious metal electrocatalysts with both high ORR activity and durability to replace the currently used costly Pt‐based catalyst is critical and still a major challenge. Herein, a facile and scalable method is reported to prepare ZIF‐8 with single ferrocene molecules trapped within its cavities (Fc@ZIF‐8), which is utilized as precursor to porous single‐atom Fe embedded nitrogen‐doped carbon (Fe–N–C) during high temperature pyrolysis. The catalyst shows a half‐wave potential (E_1/2) of 0.904 V, 67 mV higher than commercial Pt/C catalyst (0.837 V), which is among the best compared with reported results for ORR. Significant electrochemical properties are attributed to the special configuration of Fc@ZIF‐8 transforming into a highly dispersed iron–nitrogen coordination moieties embedded carbon matrix.     

Graphene‐Supported Mesoporous Carbons Prepared with Thermally Removable Templates as Efficient Catalysts for Oxygen Electroreduction

Graphene‐supported mesoporous carbons with rich nitrogen self‐doped active sites (N‐MC/rGO) are prepared by direct pyrolysis of a graphene‐oxide‐supported polymer composite embedded with massive, evenly distributed amorphous FeOOH that serve as efficient thermally removable templates. The resulting N‐MC/rGO catalysts exhibit high surface areas and apparent electrocatalytic activity for oxygen reduction reaction in alkaline media. Among the series, the sample prepared at 800 °C displays the best performance with a more positive onset potential, higher limiting currents, much higher stability, and stronger poison resistance than commercial Pt/C. This is ascribed to the synergetic functions of the highly conductive graphene support and the mesoporous N‐doped carbons that effectively impede the restacking of the graphene sheets and enhance the exposure of the rich nitrogen self‐doped active sites.     

Nitrogen‐Coordinated Single Cobalt Atom Catalysts for Oxygen Reduction in Proton Exchange Membrane Fuel Cells

Due to the Fenton reaction, the presence of Fe and peroxide in electrodes generates free radicals causing serious degradation of the organic ionomer and the membrane. Pt‐free and Fe‐free cathode catalysts therefore are urgently needed for durable and inexpensive proton exchange membrane fuel cells (PEMFCs). Herein, a high‐performance nitrogen‐coordinated single Co atom catalyst is derived from Co‐doped metal‐organic frameworks (MOFs) through a one‐step thermal activation. Aberration‐corrected electron microscopy combined with X‐ray absorption spectroscopy virtually verifies the CoN₄ coordination at an atomic level in the catalysts. Through investigating effects of Co doping contents and thermal activation temperature, an atomically Co site dispersed catalyst with optimal chemical and structural properties has achieved respectable activity and stability for the oxygen reduction reaction (ORR) in challenging acidic media (e.g., half‐wave potential of 0.80 V vs reversible hydrogen electrode (RHE). The performance is comparable to Fe‐based catalysts and 60 mV lower than Pt/C ‐60 μg Pt cm^?2). Fuel cell tests confirm that catalyst activity and stability can translate to high‐performance cathodes in PEMFCs. The remarkably enhanced ORR performance is attributed to the presence of well‐dispersed CoN₄ active sites embedded in 3D porous MOF‐derived carbon particles, omitting any inactive Co aggregates.     

2D Nanoporous Fe−N/C Nanosheets as Highly Efficient Non‐Platinum Electrocatalysts for Oxygen Reduction Reaction in Zn‐Air Battery

It is an ongoing challenge to fabricate nonprecious oxygen reduction reaction (ORR) catalysts that can be comparable to or exceed the efficiency of platinum. A highly active non‐platinum self‐supporting Fe?N/C catalyst has been developed through the pyrolysis of a new type of precursor of iron coordination complex, in which 1,4‐bis(1H‐1,3,7,8–tetraazacyclopenta(1)phenanthren‐2‐yl)benzene (btcpb) functions as a ligand complexing Fe(II) ions. The optimal catalyst pyrolyzed at 700 °C (Fe?N/C?700) shows the best ORR activity with a half‐wave potential (E_1/2) of 840 mV versus reversible hydrogen electrode (RHE) in 0.1 m KOH, which is more positive than that of commercial Pt/C (E_1/2: 835 mV vs RHE). Additionally, the Fe?N/C?700 catalyst also exhibits high ORR activity in 0.1 m HClO₄ with the onset potential and E_1/2 comparable to those of the Pt/C catalyst. Notably, the Fe?N/C?700 catalyst displays superior durability (9.8 mV loss in 0.1 m KOH and 23.6 mV loss in 0.1 m HClO₄ for E_1/2 after 8000 cycles) and better tolerance to methanol than Pt/C. Furthermore, the Fe?N/C?700 catalyst can be used for fabricating the air electrode in Zn–air battery with a specific capacity of 727 mA hg^?1 at 5 mA cm^?2 and a negligible voltage loss after continuous operation for 110 h.