Synthesis of polyacrylonitrile via reverse ATRP initiated by 1,1,2,2‐tetraphenyl‐1,2‐ethanediol/CuCl2/2,2′‐bipyridine

The reverse atom‐transfer radical polymerization (RATRP) technique using CuCl₂/2,2′‐bipyridine (bipy) complex as a catalyst was applied to the living‐radical polymerization of acrylonitrile (AN). 1,1,2,2‐Tetraphenyl‐1,2‐ethanediol (TPED) was first used as the initiator in this copper‐based RATRP initiation system. A CuCl₂ to bipy ratio of 0.5 not only gives the best control of molecular weight and its distribution, but also provides rather rapid reaction rate. The rate of polymerization increases with increasing the polymerization temperature, and the apparent activation energy was calculated to be 53.2 kJ mol^?1. Because the polymers obtained were end‐functionalized by chlorine atoms, they were used as macroinitiators to proceed the chain extension polymerization in the presence of CuCl/bipy catalyst system via a conventional ATRP process. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3529–3533, 2007     

Thermal characterization of carbon‐nanofiber‐reinforced tetraglycidyl‐4,4′‐diaminodiphenylmethane/4,4′‐diaminodiphenylsulfone epoxy composites

The thermal properties of carbon nanofibers (CNF)/epoxy composites, composed of tetraglycidyl‐4,4′‐diaminodiphenylmethane (TGDDM) resin and 4,4′‐diaminodiphenylsulfone (DDS) as a curing agent, were investigated with differential scanning calorimetry (DSC), thermogravimetric analysis, and dynamic mechanical thermal analysis. DSC results showed that the presence of CNF had no pronounced influence on the heat of the cure reaction. However, the incorporation of CNF slightly improved the thermal stability of the epoxy. Furthermore, the storage modulus of the TGDDM/DDS epoxy was significantly enhanced, whereas the glass‐transition temperature was not significantly affected, upon the incorporation of CNFs. The storage modulus of 5 wt % CNF/epoxy composites at 25°C was increased by 35% in comparison with that of the pure epoxy. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 295–298, 2006     

Synthesis of Fully Substituted 3‐Formyl‐4‐iodofurans via a Gold(I)‐Catalyzed Oxidation/1,2‐Alkynyl Migration/Cyclization/Iodination Cascade

A highly efficient gold(I)‐catalyzed cascade reaction for the synthesis of fully substituted 3‐formyl‐4‐iodofurans has been developed. Mechanistic investigations indicate a reaction pathway that involves a direct iodination reaction of the organogold intermediate via functionalization of the Au C(sp²) bond, instead of a direct iodination of the 3‐formylfurans.

     

Asymmetric Organocatalytic Cascade Michael/Hemiketalization/Retro‐Aldol Reaction of 2‐[(E)‐2‐Nitrovinyl]phenols with 2,4‐Dioxo‐4‐arylbutanoates: A Convenient Access to Chiral α‐Keto Esters

An unprecedented organocatalytic enantioselective cascade Michael/hemiketalization/retro‐aldol reaction of 2‐[(E)‐2‐nitrovinyl]phenols and 2,4‐dioxo‐4‐arylbutanoates is described. With a bifunctional squaramide catalyst incorporating (1R,2R)‐1,2‐diphenylethane‐1,2‐diamine, the reactions afford products in 75–99% yields with 80–98% ee. This process provides an enantioselective pathway for the synthesis of chiral α‐keto esters, precursors of 3‐arylproline derivatives, δ‐amino α‐keto acids or cyclic α‐keto lactams.

     

Characterization of poly(1‐methyl‐1,4‐butanediol‐1,4‐diyl/2,3,4‐trihydro‐5‐methylfuran‐2,5‐diyl) prepared from natural rubber through 2D NMR spectroscopy

Poly(1‐methyl‐1,4‐butanediol‐1,4‐diyl/2,3,4‐trihydro‐5‐methylfuran‐2,5‐diyl) was prepared by epoxidation of deproteinized natural rubber with m‐chloroperbenzoic acid followed by hydrolysis with sulfuric acid. Characterization of the resulting product was performed through FT‐IR, ¹H NMR, and ¹³C NMR spectroscopies. All signals appearing in the ¹H and ¹³C NMR spectra were assigned by distortionless enhancement by polarization transfer (DEPT), quaternary carbon observation (QUAT), correlation spectroscopy (COSY), and heteronuclear multiple quantum correlation (HMQC) measurements. After proving the primary structure of the product, one pot synthesis of poly(1‐methyl‐1,4‐butanediol‐1,4‐diyl/2,3,4‐trihydro‐5‐methylfuran‐2,5‐diyl) from deproteinized natural rubber latex was carried out with peracetic acid and 2‐propanol. The resulting product was characterized by ¹H NMR spectroscopy on the basis of the assignments established in this study, and its gas permeability was measured for a practical application as a film. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Heme Oxygenase Inhibition by 1‐Aryl‐2‐(1H‐imidazol‐1‐yl/1H‐1,2,4‐triazol‐1‐yl)ethanones and Their Derivatives

Previous studies by our research group have been concerned with the design of selective inhibitors of heme oxygenases (HO‐1 and HO‐2). The majority of these were based on a four‐carbon linkage of an azole, usually an imidazole, and an aromatic moiety. In the present study, we designed and synthesized a series of inhibition candidates containing a shorter linkage between these groups, specifically, a series of 1‐aryl‐2‐(1H‐imidazol‐1‐yl/1H‐1,2,4‐triazol‐1‐yl)ethanones and their derivatives. As regards HO‐1 inhibition, the aromatic moieties yielding best results were found to be halogen‐substituted residues such as 3‐bromophenyl, 4‐bromophenyl, and 3,4‐dichlorophenyl, or hydrocarbon residues such as 2‐naphthyl, 4‐biphenyl, 4‐benzylphenyl, and 4‐(2‐phenethyl)phenyl. Among the imidazole‐ketones, five ( 36 – 39 , and 44 ) were found to be very potent (IC₅₀<5 μM ) toward both isozymes. Relative to the imidazole‐ketones, the series of corresponding triazole‐ketones showed four compounds ( 54 , 55 , 61 , and 62 ) having a selectivity index >50 in favor of HO‐1. In the case of the azole‐dioxolanes, two of them ( 80 and 85 ), each possessing a 2‐naphthyl moiety, were found to be particularly potent and selective HO‐1 inhibitors. Three non‐carbonyl analogues ( 87 , 89 , and 91 ) of 1‐(4‐chlorophenyl)‐2‐(1H‐imidazol‐1‐yl)ethanone were found to be good inhibitors of HO‐1. For the first time in our studies, two azole‐based inhibitors ( 37 and 39 ) were found to exhibit a modest selectivity index in favor of HO‐2. The present study has revealed additional candidates based on inhibition of heme oxygenases for potentially useful pharmacological and therapeutic applications.     

Preparation of polystyrene/poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐p‐phenylenevinylene] fluorescent microspheres by miniemulsion polymerization

Fluorescent microspheres have great potential for use as probes in biological diagnostics. In this context, poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐p‐phenylenevinylene] (MEH‐PPV), a conjugated polymer which has high quantum yield, controllable emitting wavelength and facile processing in manufacture, was used as a fluorescent material for the preparation of polystyrene (PS)/MEH‐PPV fluorescent microspheres via miniemulsion polymerization. We demonstrate that the emitting wavelength of the PS/MEH‐PPV fluorescent microspheres can be regulated by changing the amount of azobisisobutyronitrile initiator in the polymerization process. Using acrylic acid comonomer, poly[styrene‐co‐(acrylic acid)]/MEH‐PPV fluorescent microspheres with functional carboxyl groups were also prepared. All the microspheres were characterized using transmission electron microscopy, scanning electron microscopy, fluorescence microscopy and fluorescence spectrophotometry. The functional carboxyl groups were characterized using Fourier transform infrared spectroscopy. This work provides a novel platform for the preparation of conjugated polymer fluorescent microspheres for biological applications. © 2012 Society of Chemical Industry     

Synthesis and Characterization of 1‐Azido‐2‐Nitro‐2‐Azapropane and 1‐Nitrotetrazolato‐2‐Nitro‐2‐Azapropane

1‐Azido‐2‐nitro‐2‐azapropane ( 1 ) was synthesized in high yield from 1‐chloro‐2‐nitro‐2‐azapropane and sodium azide. 1‐Nitrotetrazolato‐2‐nitro‐2‐azapropane ( 2 ) was synthesized in high yield from 1‐chloro‐2‐nitro‐2‐azapropane and silver nitrotetrazolate. The highly energetic new compounds ( 1 and 2 ) were characterized using vibrational (IR and Raman) and multinuclear NMR spectroscopy (¹H, ¹³C, ¹⁴N), elemental analysis and low‐temperature single crystal X‐ray diffraction. 1‐Azido‐2‐nitro‐2‐azapropane ( 1 ) represents a covalently bound liquid energetic material which contains both a nitramine unit and an azide group in the molecule. 1‐Nitrotetrazolato‐2‐nitro‐2‐azapropane ( 2 ) is a covalently bound room‐temperature stable solid which contains a nitramine group and a nitrotetrazolate ring unit in the molecule. Compounds 1 and 2 are hydrolytically stable at ambient conditions. The impact sensitivity of compound 1 is very high (<1 J) whereas compound 2 is less sensitive (<6 J).     

Investigation on β‐polypropylene/PP‐g‐MAH/ surface‐treated calcium carbonate composites

β‐Polypropylene composites containing calcium carbonate treated by titanate coupling agent (T‐CaCO₃) and maleic anhydride grafted PP (PP‐g‐MAH) were prepared by melt compounding. The crystallization, morphology and mechanical properties of the composites were investigated by means of differential scanning calorimetry, wide‐angle X‐ray diffraction, polarized light microscopy, scanning electron microscopy and mechanical tests. It is found that both T‐CaCO₃ and NT‐C are able to induce the formation of β‐phase, and NT‐C greatly increases the β content and decreases the spherulitic size of PP. PP‐g‐MAH facilitates the formation of β‐form PP and improves the compatibility between T‐CaCO₃ and PP. Izod notched impact strength of β‐PP/T‐CaCO₃ composite is higher than that of PP/T‐CaCO₃ composite, indicating the synergistic toughening effect of T‐CaCO₃ and β‐PP. Incorporation of PP‐g‐MAH into β‐PP/T‐CaCO₃ composite further increases the content of β‐crystal PP and improves the impact strength and tensile strength when T‐CaCO₃ concentration is below 5 wt%. The nonisothermal crystallization kinetics of β‐PP composites is well described by Jeziorny's and Mo's methods. It is found that NT‐C and T‐CaCO₃ accelerate the crystallization rate of PP but the influence of PP‐g‐MAH on crystallization rate of β‐PP composite is marginal. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Fast‐swelling oxidized starch phosphate–poly(acrylate/acrylamide/2‐acryloylamino‐2‐methyl‐1‐propanesulfonic acid) superabsorbent composite

A fast‐swelling superabsorbent composite was prepared by solution polymerization of acrylate, acrylamide, 2‐acryloylamino‐2‐methyl‐1‐propanesulfonic acid and oxidized starch phosphate. Ethanol, propyl alcohol, butyl alcohol, and sodium bicarbonate were used as foaming agents to produce fast‐swelling characteristics. The structure of the superabsorbent composite was characterized using Fourier transform infrared spectroscopy (FTIR). The influences of the amount of water, acrylamide, 2‐acryloylamino‐2‐methyl‐1‐propanesulfonic acid, oxidized starch phosphate, initiator, and trihydroxymethyl propane glycidol ether, as well as the neutralization degree of acrylic acid on the equilibrium swelling degree and swelling rate of the superabsorbent composite, were investigated. The equilibrium swelling degree of the superabsorbent composite prepared in a 0.9 wt% NaCl aqueous solution was 52 g g^?1, and the swelling rate reached 0.86 mL g^?1 s^?1. The swelling kinetics was also investigated, and the results indicate that swelling of the superabsorbent composites obeys Schott's pseudo second‐order kinetics model. POLYM. ENG. SCI., 56:1267–1274, 2016. © 2016 Society of Plastics Engineers     

Polymerization of 4‐(4′‐N‐1,8‐naphthalimidophenyl)‐1,2,4‐triazolidine‐3,5‐dione with diisocyanates

4‐(4′‐Aminophenyl)‐1,2,4‐triazolidine‐3,5‐dione ( 1 ) was reacted with 1,8‐naphthalic anhydride ( 2 ) in a mixture of acetic acid and pyridine (3 : 2) under refluxing temperature and gave 4‐(4′‐N‐1,8‐naphthalimidophenyl)‐1,2,4‐triazolidine‐3,5‐dione ( NIPTD ) ( 3 ) in high yield and purity. The compound NIPTD was reacted with excess n‐propylisocyanate in N,N‐dimethylacetamide solution and gave 1‐(n‐propylamidocarbonyl)‐4‐[4′‐(1,8‐naphthalimidophenyl)]‐1,2,4‐triazolidine‐3,5‐dione ( 4 ) and 1,2‐bis(n‐propylamidocarbonyl)‐4‐[4′‐(1,8‐naphthalimidophenyl)]‐1,2,4‐ triazolidine‐3,5‐dione ( 5 ) as model compounds. Solution polycondensation reactions of monomer 3 with hexamethylene diisocyanate ( HMDI ), isophorone diisocyanate ( IPDI ), and tolylene‐2,4‐diisocyanate ( TDI ) were performed under microwave irradiation and conventional solution polymerization techniques in different solvents and in the presence of different catalysts, which led to the formation of novel aliphatic‐aromatic polyureas. The polycondensation proceeded rapidly, compared with conventional solution polycondensation, and was almost completed within 8 min. These novel polyureas have inherent viscosities in a range of 0.06–0.20 dL g^?1 in conc. H₂SO₄ or DMF at 25°C. Some structural characterization and physical properties of these novel polymers are reported. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2861–2869, 2003     

Chiral Resolution and Pharmacological Characterization of the Enantiomers of the Hsp90 Inhibitor 2‐Amino‐7‐[4‐fluoro‐2‐(3‐pyridyl)phenyl]‐4‐methyl‐7,8‐dihydro‐6H‐quinazolin‐5‐one Oxime

Heat‐shock protein 90 (Hsp90) is a molecular chaperone involved in the stabilization of key oncogenic signaling proteins, and therefore, inhibition of Hsp90 represents a new strategy in cancer therapy. 2‐Amino‐7‐[4‐fluoro‐2‐(3‐pyridyl)phenyl]‐4‐methyl‐7,8‐dihydro‐6H‐quinazolin‐5‐one oxime is a racemic Hsp90 inhibitor that targets the N‐terminal adenosine triphosphatase site. We developed a method to resolve the enantiomers and evaluated their inhibitory activity on Hsp90 and the consequent antitumor effects. The (S) stereoisomer emerged as a potent Hsp90 inhibitor in biochemical and cellular assays. In addition, this enantiomer exhibited high oral bioavailability in mice and excellent antitumor activity in two different human cancer xenograft models.     

Polycarbonate/1‐(2‐hydroxyethyl)‐2,3‐dimethylimidazolium chloride composite membranes and short‐range chain mobility analysis

In this investigation, the incorporation of imidazolium salt, 1‐(2‐hydroxehtyl)‐2,3‐dimethylimidazolium chloride [hydemmim][Cl] within bisphenol A polycarbonate (PC) matrix and the subsequent formation of membranes via casting were studied. Characterizations that aimed to establish structure‐property correlations by Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, dynamic mechanical thermal analysis, and water vapor transport (WVT) were performed. The results indicated that the presence of ionic liquid (IL) within the PC matrix significantly alter the local and macromolecular structure. The thermal stability is increased for all levels of incorporation. The plasticizing and antiplasticizing effects were observed due to the influence of the proportions of IL incorporated and of the cation's substituent chain of this IL. Distinct mechanisms of WVT were also observed in the presence of IL. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45117.     

Reagent/Substituent Switching Approach for the Synthesis of Substituted 1,3,4‐Oxadiazole/1,3,4‐Oxadiazoline and 1,2,4‐Triazole Derivatives from N‐Substituted Hydrazides

A metal‐free method for the synthesis of substituted 1,3,4‐oxadiazole/1,3,4‐oxadiazoline and 1,2,4‐triazole derivatives from a common starting material via reagent/substituent switching is reported. In the presence of 2‐fluoropyridine/triflic anhydride, 1,3,4‐oxadiazole derivatives were exclusively formed from N′‐tert‐butylhydrazides and 1,3,4‐oxadiazoline derivatives were produced from N‐phenylhydrazides. On the other hand, when using pyridine/triflic anhydride, salts of 1,2,4‐triazoles were the sole products.

     

Phase‐Transfer‐Catalyzed Olefin Isomerization/α‐Alkylation of α‐Alkynylcrotonates as a Route for 1,4‐Enynes

The phase‐transfer‐catalyzed alkylation of α‐alkynylcrotonates was developed as a means to provide 1,4‐enynes deconjugated by an all‐carbon quaternary center. Extension to the asymmetric version using the chiral phase‐transfer catalyst (S)‐ 3 provided the alkylated compounds with up to 87% ee.     

Semiflexible random thermotropic copolymers from 8‐(3‐hydroxy phenyl) octanoic acid and 3‐chloro‐4‐hydroxy benzoic acid/3,5‐dibromo‐4‐hydroxy benzoic acid

Two series of semiflexible random thermotropic copolymers containing 8‐(3‐hydroxy phenyl) octanoic acid (HPOA) with either 3‐chloro‐4‐hydroxy benzoic acid or 3,5‐dibromo‐4‐hydroxy benzoic acid were prepared by melt polycondensation techniques. The copolyesters were characterized with Fourier transform infrared spectroscopy, dilute solution viscometry, hot‐stage polarized light microscopy, differential scanning calorimetry, thermogravimetric analysis, and wide‐angle X‐ray diffraction. Studies revealed that the amount of HPOA as a disruptor incorporated into the backbone of substituted 4‐hydroxy benzoic acids had a detrimental effect on the liquid‐crystalline behavior. Mesophase‐transition temperatures were observed between 210 and 250°C, and the optical textures were of typical nematic phases. The degree of crystallinity decreased with an increase in the HPOA content. The thermal stability of the copolymers was in the range of 310–370°C. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Effect of monomer composition on properties of copolyimides derived from 3,3′,4,4′‐biphenyltetracarboxylic dianhydride/4,4′‐oxydianiline/1,3‐bis (4‐aminophenoxy)benzene

A series of uncontrolled molecular weight homopolyimides and copolyimides based on 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (s‐BPDA)/4,4′‐oxydianiline (4,4′‐ODA)/1,3‐bis(4‐aminophenoxy)benzene (TPER) were synthesized. All the polyimides displayed excellent thermal stability and mechanical properties, as evidenced by dynamic thermogravimetric analysis and tensile properties testing. A singular glass transition temperature (T_g) was found for each composite from either differential scanning calorimetry (DSC) or dynamic mechanical analysis (DMA), but the values determined from tan δ of DMA were much different from those determined from DSC and storage modulus (E′) of DMA. The Fox equation was used to estimate the random T_g values. Some composites exhibited re‐crystallization after quenching from the melt; upon heating, multi‐melting behavior was observed after isothermal crystallization at different temperatures. The equilibrium melting temperature was estimated using the Hoffman‐Weeks method. Additionally, DMA was conducted to obtain E′ and tan δ. Optical properties were strongly dependent on the monomer composition as evidenced by UV‐visible spectra. X‐ray diffraction was used to interpret the crystal structure. All the results indicated that composites with TPER composition ≥ 70% were dominated by the TPER/s‐BPDA polyimide phase, and ≤40% by the 4,4′‐ODA/s‐BPDA polyimide phase. When the ratio between the two diamines was close to 1:1, the properties of the copolyimides were very irregular, which means a complicated internal structure. Copyright © 2011 Society of Chemical Industry     

Synthesis of novel azo‐containing polyureas derived from 4‐[4′‐(2‐hydroxy‐1‐naphthylazo)phenyl]‐1,2,4‐triazolidine‐3,5‐dione

4‐[4′‐(2‐Hydroxy‐1‐naphthylazo)phenyl]‐1,2,4‐triazolidine‐3,5‐dione ( HNAPTD ) ( 1 ) has been reacted with excess amount of n‐propylisocyanate in DMF (N,N‐dimethylformamide) solution at room temperature. The reaction proceeded with high yield, and involved reaction of both N? H of the urazole group. The resulting bis‐urea derivative 2 was characterized by IR, ¹H‐NMR, elemental analysis, UV‐Vis spectra, and it was finally used as a model compound for the polymerization reaction. Solution polycondensation reactions of monomer 1 with Hexamethylene diisocyanate ( HMDI ) and isophorone diisocyanate ( IPDI ) were performed in DMF in the presence of pyridine as a catalyst and lead to the formation of novel aliphatic azo‐containing polyurea dyes, which are soluble in polar solvents. The polymerization reaction with tolylene‐2,4‐diisocyanate ( TDI ) gave novel aromatic polyurea dye, which is insoluble in most organic solvents. These novel polyureas have inherent viscosities in a range of 0.15–0.22 g dL^?1 in DMF at 25°C. Some structural characterization and physical properties of these novel polymers are reported. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3177–3183, 2001     

Gold‐Catalyzed Sequential Amination/Annulation Reactions of 2‐Propynyl‐1,3‐dicarbonyl Compounds

The gold(III)‐catalyzed sequential amination/annulation reaction of 2‐propynyl‐1,3‐dicarbonyl compounds 1 with primary amines 2 produces 1,2,3,5‐substituted pyrroles 4 in moderate to high yields.