Effect of dehydrochlorination of PVC on miscibility and phase separation of binary and ternary blends of poly(vinyl chloride), poly(ethylene-co-vinyl acetate) and poly(styrene-co-acrylonitrile)

The enhancement of miscibility at the lower critical solution temperature (LCST) of the blends poly(vinyl chloride)/poly(ethylene-co-vinyl acetate) (PVC/EVA), poly(vinyl chloride)/poly(styrene-co-acrylonitrile) (PVC/SAN) and poly(vinyl chloride)/poly(ethylene-co-vinyl acetate)/poly(styrene-co-acrylonitrile) (PVC/EVA/SAN) was observed at the micron level. Such miscibility is attributed to the dehydrochlorination and formation of hydrogen bonds between blend components. However, macrolevel immiscibility of these blends heated to the LCST was observed. Such microdomain compatibility of these blends gives a synergistic character. Brittle-type failure observed for LCST samples testifies to the synergism in treated blends. ©1997 SCI     

Blends of poly(vinyl chloride) (PVC)/natural rubber‐g‐(styrene‐co‐methyl methacrylate) for improved impact resistance of PVC

To improve the mechanical properties of poly(vinyl chloride) (PVC), the possibility of combining PVC with elastomers was considered. Modification of natural rubber (NR) by graft copolymerization with methyl methacrylate (MMA) and styrene (St) was carried out by emulsion polymerization by using redox initiator to provide an impact modifier for PVC. The impact resistance, dynamic mechanical analysis (DMA), and scanning electron microscopy (SEM) of St and MMA grafted NR [NR‐g‐(St‐co‐MMA)]/PVC (graft copolymer product contents of 5, 10, and 15%) blends were investigated as a function of the amount of graft copolymer product. It was found that the impact strength of blends was increased with an increase of the graft copolymer product content. DMA studies showed that NR‐g‐(St‐co‐MMA) has partial compatibility with PVC. SEM confirmed a shift from brittle failure to ductility with an increase graft copolymer content in the blends. The mechanical properties showed that NR‐g‐(St‐co‐MMA) interacts well with PVC and can also be used as an impact modifier for PVC. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1666–1672, 2004     

A tough noncombustible material prepared by grafting of poly(2‐ethylhexyl acrylate) with vinyl chloride

A noncombustible tough poly(vinyl chloride) (tPVC) was prepared by suspension‐grafted copolymerization of poly(2‐ethylhexyl acrylate) (poly‐EHA; elastomer) with vinyl chloride (VC). Elastomer (poly‐EHA) was prepared by emulsion, mainly homopolymerization of 2‐ethylhexyl acrylate at a temperature of 30 ± 0.1°C in the presence of a redox system and with the advantage of dosing the monomer into two portions. Grafted‐suspension copolymerization of poly‐EHA with VC was carried out at 54 ± 0.1°C, keeping other reaction conditions only slightly modified in comparison with those for the polymerization of pure VC. An optimum content of the incorporated poly‐EHA in PVC was found to be in the range 7.5–8.5 wt %, whereas notched toughness of 85–87 kJ m^?2 was reached. Both below and above the found range of the content of poly‐EHA, the toughness decreases. A copolymer prepared by a direct‐emulsion copolymerization of 2‐EHA and VC (poly‐EHA‐co‐VC) exhibited worse mechanical properties than the copolymer prepared by two polymerization steps. On the basis of experimental results, effects of the reaction procedure on the properties of resulting material are described. In addition to good mechanical properties, tPVC also shows its noncombustibly. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2355–2362, 2002     

Miscibility and crystallization behavior of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/poly(vinyl acetate) blends

The miscibility and crystallization behavior of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (P(HB‐co‐HV))/poly(vinyl acetate) (PVAc) blends have been investigated by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). It was found that P(HB‐co‐HV)/PVAc blends were miscible in the melt over the whole compositions. Thus the blend exhibited a single glass transition temperature (T_g), which increased with increasing PVAc composition. The spherulitic morphologies of P(HB‐co‐HV)/PVAc blends indicated that the PVAc was predominantly segregated into P(HB‐co‐HV) interlamellar or interfibrillar regions during P(HB‐co‐HV) crystallization because of the volume‐filled spherulites. As to the crystallization kinetics study, it was found that the overall crystallization and crystal growth rates decreased with the addition of PVAc. The kinetics retardation was primarily attributed to the reduction of chain mobility and dilution of P(HB‐co‐HV) upon mixing with higher T_g PVAc. The overall crystallization rate was predominantly governed by the spherulitic growth rate and promoted by the samples treated with the quenched state because of the higher nucleation density. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 980–988, 2006     

Miscibility and intermolecular hydrogen‐bonding interactions in poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate)/poly(4‐vinyl phenol) binary blends

The miscibility and hydrogen bonding interaction in the poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate)/poly(4‐vinyl phenol) [P(3HB‐co‐3HH)/PVPh] binary blends were investigated by differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). The DSC results indicate that P(3HB‐co‐3HH) with 20 mol % 3HH unit content is fully miscible with PVPh, and FTIR studies reveal the existence of hydrogen bonding interaction between the carbonyl groups of P(3HB‐co‐3HH) and the hydroxyl groups of PVPh. The effect of blending of PVPh on the mechanical properties of P(3HB‐co‐3HH) were studied by tensile testing. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Miscibility and crystallization kinetics of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/ poly(methyl methacrylate) blends

The miscibility and crystallization kinetics of the blends of random poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) [P(HB‐co‐HV)] copolymer and poly(methyl methacrylate) (PMMA) were investigated by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). It was found that P(HB‐co‐HV)/PMMA blends were miscible in the melt. Thus the single glass‐transition temperature (T_g) of the blends within the whole composition range suggests that P(HB‐co‐HV) and PMMA were totally miscible for the miscible blends. The equilibrium melting point (T°_m) of P(HB‐co‐HV) in the P(HB‐co‐HV)/PMMA blends decreased with increasing PMMA. The T°_m depression supports the miscibility of the blends. With respect to the results of crystallization kinetics, it was found that both the spherulitic growth rate and the overall crystallization rate decreased with the addition of PMMA. The kinetics retardation was attributed to the decrease in P(HB‐co‐HV) molecular mobility and dilution of P(HB‐co‐HV) concentration resulting from the addition of PMMA, which has a higher T_g. According to secondary nucleation theory, the kinetics of spherulitic crystallization of P(HB‐co‐HV) in the blends was analyzed in the studied temperature range. The crystallizations of P(HB‐co‐HV) in P(HB‐co‐HV)/PMMA blends were assigned to n = 4, regime III growth process. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3595–3603, 2004     

Poly(vinyl pyrrolidone‐co‐vinyl acetate)‐graft‐poly(ε‐caprolactone) as a compatibilizer for cellulose acetate/poly(ε‐caprolactone) blends

Poly(vinyl pyrrolidone‐co‐vinyl acetate)‐graft‐poly(ε‐caprolactone) (PVPVAc‐g‐PCL) was synthesized by radical copolymerization of N‐vinyl‐2‐pyrrolidone (VP)/vinyl acetate (VAc) comonomer and PCL macromonomer containing a reactive 2‐hydroxyethyl methacrylate terminal. The graft copolymer was designed in order to improve the interfacial adhesiveness of an immiscible blend system composed of cellulose acetate/poly(ε‐caprolactone) (CA/PCL). Adequate selections of preparation conditions led to successful acquisition of a series of graft copolymer samples with different values of molecular weight ( ), number of grafts (n), and segmental molecular weight of PVPVAc between adjacent grafts (M_n (between grafts)). Differential scanning calorimetry measurements gave a still immiscible indication for all of the ternary blends of CA/PCL/PVPVAc‐g‐PCL (72 : 18 : 10 in weight) that were prepared by using any of the copolymer samples as a compatibilizer. However, the incorporation enabled the CA/PCL (4 : 1) blend to be easily melt‐molded to give a visually homogeneous film sheet. This compatibilizing effect was found to be drastically enhanced when PVPVAc‐g‐PCLs of higher and M_n (between grafts) and lower n were employed. Scanning electron microscopy revealed that a uniform dispersion of the respective ingredients in the ternary blends was attainable with an assurance of the mixing scale of several hundreds of nanometers. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Novel multimonomer‐grafted polypropylene preparation and application in polypropylene/poly(vinyl chloride) blends

A novel grafted polymer was prepared in one step through free‐radical melt grafting in a single‐screw extruder. It was shown that the addition of styrene (St) to the melt‐grafting system as a comonomer could significantly enhance the grafting degree of methyl methacrylate (MMA) onto polypropylene (PP) and reduce the degradation of the PP matrix by means of Fourier transform infrared and melt flow rate testing, respectively. Then, the potential of using multimonomer‐grafted PP, which was designated PP‐g‐(St‐co‐MMA), as the compatibilizer in PP/poly(vinyl chloride) (PVC) blends was also examined. In comparison with PP/PVC blends, the average size of the dispersed phase was greatly reduced in grafted polypropylene (gPP)/PVC blends because of the addition of the PP‐g‐(St‐co‐MMA) graft copolymer. The tensile strength of the gPP/PVC blends increased significantly, and the impact strength was unchanged from that of the pure PP/PVC blends. The results of differential scanning calorimetry and scanning electron microscopy suggested that the compatibility of the PP/PVC blends was improved. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effects of tetramethylpolycarbonate‐block‐poly(styrene‐co‐acrylonitrile) copolymers containing various amounts of acrylonitrile on the interfacial properties of polycarbonate and poly(styrene‐co‐acrylonitrile) blends

Tetramethylpolycarbonate‐block‐poly(styrene‐co‐acrylonitrile) (TMPC‐block‐SAN) block copolymers containing various amounts of acrylonitrile (AN) were examined as compatibilizers for blends of polycarbonate (PC) with poly(styrene‐co‐acrylonitrile) (SAN) copolymers. To explore the effects of block copolymers on the compatibility of PC/SAN blends, the average diameter of the dispersed particles in the blend was measured with an image analyzer, and the interfacial properties of the blends were analyzed with an imbedded fibre retraction technique and an asymmetric double‐cantilever beam fracture test. Reduction in the average diameter of dispersed particles and effective improvement in the interfacial properties was observed by adding TMPC‐block‐SAN copolymers as compatibilizer of PC/SAN blend. TMPC‐block‐SAN copolymer was effective as a compatibilizer when the difference in the AN content of SAN copolymer and that of SAN block in TMPC‐block‐SAN copolymer was less than about 10 wt%. Copyright © 2004 Society of Chemical Industry     

Mechanochemical copolymerization of poly(vinyl chloride) with methyl methylacrylate in an open mill machine

Mechanical degradation of poly(vinyl chloride) (PVC) and mechanochemical copolymerization in poly(vinyl chloride)/methyl methylacrylate (PVC/MMA) systems were studied in an open mill machine. The effects of the mastication temperature, mastication time, and additives (oxygen, THF, or hydroquinone) on the mechanical degradation of PVC were investigated. The molecular weight of PVC decreased with increasing mastication time, and the efficiency of the mechanodegradation of PVC was lowered with increasing mastication temperature. The effects of the ratio of PVC to MMA, thin‐passage time, and initiator on mechanochemical copolymerization also were studied. The experimental results indicated that the degree of copolymerization increased with increasing thin‐passage times up to 45 times and then remained constant. There was a maximum degree of copolymerization at a ratio of 0.22 g/mL (PVC/MMA), and the efficiency of copolymerization always decreased with increasing time. The maximum degree and efficiency of copolymerization were 5.8 and 89%, respectively. The poly(vinyl chloride‐co‐methyl methylacrylate) copolymer can further improve the interfacial adhesion of PVC and PMMA. Thus it improves the mechanical properties of the PVC/CPE blend more effectively than pure PMMA. J. VINYL. ADDIT. TECHNOL. 12:42–48, 2006. © 2006 Society of Plastics Engineers.     

Quaternarized cationic poly[(vinyl chloride)-co-(vinyl chloroacetate)] binary copolymer as non-migration antibacterial additive in PVC matrix

Antibacterial polyvinyl chloride (PVC) materials have drawn considerable attention since their wide application in medical devices. The objective of this study is to develop a novel quaternary ammonium cationic vinyl chloride copolymer, which can be potentially used as antibacterial additive in PVC matrix. Initially, the low average-number molecular weight poly[(vinyl chloride)-co-(vinyl chloroacetate)] (PVC-co-PVCA) is synthesized by precipitation copolymerization. Subsequently, quaternary ammonium cationic moieties with different lengths of alkyl chains are introduced into the copolymers via quaternization reaction between alkyl-dimethyl tertiary amines with acyl chloride groups. The successful synthesis of PVC-co-PVCA and quaternarized copolymers are carefully confirmed by Fourier transform infrared spectroscopy, nuclear magnetic resonance (1H NMR), and x-ray photoelectron spectroscopy. The antibacterial behaviors of the quaternarized copolymers and its blends with PVC are investigated. The results reveal that all the PVC blends containing at least 5% by weight of quaternarized copolymer have superior bacteriostasis ratio (>99.6%) against both Escherichia coli (E.coli) and Staphylococcus aureus (S. aureus) due to the incorporation of quaternary ammonium groups. Meanwhile, the cationic copolymer exhibits excellent antifouling and much lower migration rate (<0.4%). These interesting consequences endow the quaternarized copolymers as alternative antibacterial agents possess a great deal of potential for use in PVC materials.     

Miscibility study of poly(vinyl chloride)/poly(methyl methacrylate‐co‐4‐vinylpyridine) by viscosimetry,DSC, and FTIR

The miscibility of the poly(vinyl chloride)/poly(methylmethacrylate) system were improved by introducing pyridine units into poly(methylmethacrylate) main. For this purpose, we have synthesized through a radical polymerization a series of methylmethacrylate‐co‐vinyl‐4‐pyridine copolymers of different compositions and carried out a comparative study by viscosimetry, differential scanning calorimetry, and Fourier transform infrared spectroscopic (FTIR) methods. The viscosimetric analysis using the Krigbaum‐Wall, K. K. Chee, and Compos approaches revealed that, the Poly(vinyl chloride)/poly(methylmethactylate‐co‐4‐vinylpyridine)(PVC/MMA4VP‐15) at 15 wt % of 4‐vinylpyridine systems in tetrahydrofuran are completely miscible in all proportions. The differential scanning calorimetry analysis confirmed the miscibility of these systems in all proportions by the appearance of only one glass transition temperature between those of the two pure constituents. The Kwei and Schneider approaches showed also the miscibility of this system, which is due to the specific interactions between the acidic hydrogen atom of PVC and the nitrogen of MMA4VP‐15. The use of FTIR method has confirmed the occurrence of this kind of interactions by broadening and shifting of the involved functional groups vibration bands. In this work, we have also carried out a preliminary test of sorption of THF aqueous solution by PVC and PVC/MMA4VP‐15 blend membranes. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Compatibilization of poly(vinyl chloride) with polyamide and with polyolefin by using poly(lauryllactam‐random‐caprolactam‐block‐caprolactone)

The compatibilization of various poly(vinyl chloride) (PVC) blends was investigated. The blend systems were PVC‐polyamide 12 (PA12), PVC‐polypropylene (PP), and PVC‐ethylene‐propylene‐diene rubber (EPDM) with a new compatibilizing agent, random‐block terpolymer poly(ω‐lauryllactam‐random‐?‐caprolactam‐block‐?‐caprolactone) or systems containing these copolymers. The results were compared to those obtained in previous studies using poly(ω‐lauryllactam‐block‐?‐caprolactone) copolymer. The new block copolymer was specially synthesized by reactive extrusion. Observation by scanning electron microscopy (SEM) revealed that compatibilized blends had a finer morphology than the noncompatibilized blends. Addition of 10 weight percent (wt%) of block copolymer proved to be sufficient to give a significant improvement of the mechanical properties of the immiscible PVC blends at room temperature and at high temperatures that were above the glass transition temperature of PVC. For polyolefins, a three‐component compatibilizing system including maleated polypropylene, polyamide 12, and block copolymer was used. It was found that poly(ω‐lauryllactam‐random‐?‐caprolactam‐block‐?‐caprolactone) was the more efficient compatibilizing agent for the modification of PVC‐polyamide 12, PVC‐polypropylene, and PVC‐ethylene‐propylene‐diene rubber blends. J. VINYL. ADDIT. TECHNOL., 11:95–110, 2005. © 2005 Society of Plastics Engineers     

Miscibility windows in ternary polymer blends of a polyester,polymethacrylate and poly(styrene‐co‐acrylonitrile)

Miscibility, phase diagrams and morphology of poly(ε‐caprolactone) (PCL)/poly(benzyl methacrylate) (PBzMA)/poly(styrene‐co‐acrylonitrile) (SAN) ternary blends were investigated by differential scanning calorimetry (DSC), optical microscopy (OM), and scanning electron microscopy (SEM). The miscibility window of PCL/PBzMA/SAN ternary blends is influenced by the acrylonitrile (AN) content in the SAN copolymers. At ambient temperature, the ternary polymer blend is completely miscible within a closed‐loop miscibility window. DSC showed only one glass transition temperature (T_g) for PCL/PBzMA/SAN‐17 and PCL/PBzMA/SAN‐25 ternary blends; furthermore, OM and SEM results showed that PCL/PBzMA/SAN‐17 and PCL/PBzMA/SAN‐25 were homogeneous for any composition of the ternary phase diagram. Hence, it demonstrated that miscibility exists for PCL/PBzMA/SAN‐17 and PCL/PBzMA/SAN‐25 ternary blends, but that the ternary system becomes phase‐separated outside these AN contents. Copyright © 2003 Society of Chemical Industry     

Miscibility and morphology of the poly(vinyl chloride)/styrene-acrylonitrile copolymer/poly(methyl methacrylate) ternary blend system

The phase equilibrium of the ternary system poly (vinyl chloride) (PVC)/styrene-acrylonitrile copolymer (77/23) (SAN)/poly (methyl methacrylate) (PMMA) was investigated using a combination of turbidity, scanning electron microscopy (SEM), and differential scanning calorimetry (DSC) measurements. Both turbidity and DSC were used to determine room temperature ternary phase diagrams. The results are basically similar, but the formulation based on the DSC results and the presumed phase model would seem more reliable since it is possible that immiscible blends may well have different phases with similar refractive indices.     

Miscibility enhancement on the poly(vinylchloride)/poly(methylmethacrylate) blend and characterization by inverse gas chromatography: The corrected polymer–polymer interaction parameters from the probes dependency

The miscibility of poly(vinyl chloride)/poly(methylmethacrylate) (PVC/PMMA) system was improved by introducing some pyrrolidone units into the main chains of PMMA. For that purpose, we have synthesized two copolymers of poly(methylmethacrylate‐co‐vinylpyrrolidone) (MMVP) through a radical polymerization and carried out a comparative study of PVC/MMVP blends by inverse gas chromatography (IGC) and differential scanning calorimetry (DSC) methods. The adequacy of seven n‐alkane probes has been tested to determine the thermodynamic parameters. The miscibility of the two systems has been proved by a single T_g for each blend. This observation was also confirmed by DSC analysis. To highlight the presence of interaction and its intensity between PVC and MMVP in the blends, the polymer–polymer interaction parameters have been evaluated by IGC trough which the influence of the solute has been resolved. The Schneider approach confirmed the miscibility of these systems as the K deviates positively from unity. The miscibility has been appeared highlighted from the positive difference in surface energy between the pure polymers and their blends. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Competitive hydrogen bonding mechanisms underlying phase behavior of triple poly(N‐vinyl pyrrolidone)–poly(ethylene glycol)–poly(methacrylic acid‐co‐ethylacrylate) blends

Differential scanning calorimetry (DSC) of triple blends of high molecular weight poly(N‐vinyl pyrrolidone) (PVP) with oligomeric poly(ethylene glycol) (PEG) of molecular weight 400 g/mol and copolymer of methacrylic acid with ethylacrylate (PMAA‐co‐EA) demonstrates partial miscibility of polymer components, which is due to formation of interpolymer hydrogen bonds (reversible crosslinking). Because both PVP and PMAA‐co‐EA are amorphous polymers and PEG exhibits crystalline phase, the DSC examination is informative on the phase state of PEG in the triple blends and reveals a strong competition between PEG and PMAA‐co‐EA for interaction with PVP. The hydrogen bonding in the triple PVP–PEG–PMAA‐co‐EA blends has been established with FTIR Spectroscopy. To evaluate the relative strengths of hydrogen bonded complexes in PVP–PEG–PMAA‐co‐EA blends, quantum‐chemical calculations were performed. According to this analysis, the energy of H‐bonding has been found to diminish in the order: PVP–PMAA‐co‐EA–PEG(OH) > PVP–(OH)PEG(OH)–PVP > PVP–H₂O > PVP–PEG(OH) > PMAA‐co‐EA–PEG(? O? ) > PVP–PMAA‐co‐EA > PMAA‐co‐EA–PEG(OH). Thus, most stable complexes are the triple PVP–PMAA‐co‐EA–PEG(OH) complex and the complex wherein comparatively short PEG chains form simultaneously two hydrogen bonds to PVP carbonyl groups through both terminal OH‐groups, acting as H‐bonding crosslinks between longer PVP backbones. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Chemical fixation of carbon dioxide to copolymers bearing cyclic carbonate group

This study is related to the investigation of the chemical fixation of carbon dioxide to copolymers bearing a cyclic carbonate group and their application to polymer blends. In the synthesis of (2-oxo-l,3-dioxolan4-yl) methyl vinyl ether (OVE) from glycidyl vinyl ether (GVE) and CO₂, quaternary ammonium salt catalysts showed good yield of OVE. The results with long alkyl chain and with lower accessibility showed a higher catalytic activity. Mixed catalyst of PEG-4000 and Nal showed higher catalytic activity than Nal alone. The copolymer of OVE and acrylonitrile (AN) was prepared by radical copolymerization in acetonitrile at 60 °C. The monomer reactivity ratios were given as r₁(OVE)=0.36 and r₂(AN)=1.21 in the copolymerization of OVE and AN. The films of poly(OVE-co-AN)/PVC blends were cast from DMF. The poly(OVE-co-AN)/PVC blends showed good miscibility over whole composition ranges.     

Effects of poly(vinyl acetate) and poly(vinyl chloride‐co‐vinyl acetate) low‐profile additives on properties of cured unsaturated polyester resins. II. glass‐transition temperatures and mechanical properties

Three series of self‐synthesized poly(vinyl acetate)‐based low‐profile additives (LPAs), including poly(vinyl acetate), poly(vinyl chloride‐co‐vinyl acetate), and poly(vinyl chloride‐co‐vinyl acetate‐co‐maleic anhydride), with different chemical structures and molecular weights were studied. Their effects on the glass‐transition temperatures and mechanical properties for thermoset polymer blends made from styrene, unsaturated polyester, and LPAs were investigated by an integrated approach of the static phase characteristics, cured sample morphology, reaction kinetics, and property measurements. Based on Takayanagi mechanical models, the factors that control the glass‐transition temperature in each phase region of the cured samples and the mechanical properties are discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3347–3357, 2003     

Studies on polyblends of poly(vinyl chloride) and acrylonitrile-butadiene-styrene terpolymer

Blends of poly (vinyl chloride) (PVC) and acrylonitrile-butadiene styrene (ABS) terpolymer were prepared in different ratios by a melt blending technique. ABS containing three different levels of rubber content were used. A quantitative assessment of ABS in PVC/ABS blends has been shown by infrared studies. ABS content has been shown as the presence of the characteristic acrylonitrile peak. Differential scanning calorimetry (DSC) studies have been carried out to study the glass transition (T_g) behavior of the blends. Two T_g values corresponding to PVC and styrene-acrylonitrile (SAN) copolymer have been observed. Thermogravimetric analysis (TGA) reveals a significant improvement in thermal stability of these blends as compared to PVC. Mechanical properties show a significant increase in the impact strength which is related to rubber content of the ABS used. Morphological studies have been carried out by scanning electron microscopy which support the observation that an increase in rubber content results in greater ductility.