Miscibility,crystallization, and mechanical properties of poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)/ poly(butylene succinate) blends

Naturally amorphous biopolyester poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) (P3/4HB) containing 21 mol % of 4HB was blended with semi‐crystal poly(butylene succinate) (PBS) with an aim to improve the properties of aliphatic polyesters. The effect of PBS contents on miscibility, thermal properties, crystallization kinetics, and mechanical property of the blends was evaluated by DSC, TGA, FTIR, wide‐angle X‐ray diffractometer (WAXD), Scanning Electron Microscope (SEM), and universal material testing machine. The thermal stability of P3/4HB was enhanced by blending with PBS. When PBS content is less than 30 wt %, the two polymers show better miscibility and their crystallization trend was enhanced by each other. The optimum mechanical properties were observed at the 5–10 wt % PBS blends. However, when the PBS content is more than 30 wt %, phase inversion happened. And the two polymers give lower miscibility and poor mechanical properties. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Miscibility of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) with high molecular weight poly(lactic acid) blends determined by thermal analysis

An important strategy used in the polymer industry in recent years is blending two bio‐based polymers to attain desirable properties similar to traditional thermoplastics, thus increasing the application potential for bio‐based and bio‐degradable polymers. Miscibility of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) with poly(L ‐lactic acid) (PLA) were characterized using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). Three different grades of commercially available PLAs and one type of PHBV were blended in different ratios of 50/50, 60/40, 70/30, and 80/20 (PHBV/PLA) using a micro‐compounder at 175°C. The DSC and TGA analysis showed the blends were immiscible due to different stereo configuration of PLA polymer and two distinct melting temperatures. However, some compatibility between PHBV and PLA polymers was observed due to decreases in PLA's glass transition temperatures. Additionally, the blends do not show clear separation by SEM analysis, as observed in the thermal analysis. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Crystallization behavior of partially crosslinked poly(β‐hydroxyalkonates)/poly(butylene succinate) blends

Partially crosslinked poly(β‐hydroxybutyrate‐co‐β‐hydroxyvalerate)/poly(butylene succinate) (PHBV/PBS) and poly(β‐hydroxybutyrate)/poly(butylene succinate) (PHB/PBS) blends were prepared by melt compounding with dicumyl peroxide. The effect of partial crosslinking on crystallization of the PHBV/PBS and PHB/PBS blends was investigated systematically. Differential scanning calorimetry results showed that the overall crystallization rates of both PHBV and PBS in their blends were enhanced considerably by the partial crosslinking. Similar results were also detected in the PHB/PBS blends. The polarized optical microscope observation displayed that the nuclei density of PHBV was increased while the spherulitic morphology did not change much. Conversely, the PBS spherulites turned into cloud‐like morphology after the partial crosslinking which is a result of the decrease in spherulite size, the reduction in interspherulite distance and the interconnection of fine PBS domains. Wide angle X‐ray diffraction patterns confirmed the enhancement in crystallization of the PHBV/PBS blends after the partial crosslinking without modification on crystalline forms of the PHBV and PBS components. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41020.     

Blends of polylactide and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) with low content of hydroxyvalerate unit: Morphology,structure, and property

The Polylactide (PLA)/poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) blends with four different weight ratios were prepared by melt mixing. PLA and PHBV in PLA/PHBV blends were immiscible while the weak interaction between PLA and PHBV existed. The PHBV domains below 2 μm were dispersed in PLA matrix uniformly. The addition of PHBV made the crystallization of PLA easier due to PHBV acting as nucleating agent. PLA spherulites in PLA/PHBV blends presented various banded structures. In addition, the crystallinity of neat PLA was lower than those of PLA/PHBV blends. With the increase of PHBV content in PLA/PHBV blends, the crystallinity of PLA/PHBV blends increased. PHBV could enhance significantly the toughness of PLA. However, with the increase of PHBV content, the yield stress (σ_y), tensile modulus (E), and the yield strain (ε_y) of PLA/PHBV blends decreased gradually. In addition, incorporation of PHBV to PLA caused a transformation from an optical transparent to an opaque system. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42689.     

Control and development of crystallinity and morphology in poly(β‐hydroxybutyrate‐co‐β‐hydroxyvalerate)/poly(propylene carbonate) blends

Two different methodologies (reactive blending and mechanical blending) for preparing blends of poly(β‐hydroxybutyrate‐co‐β‐hydroxyvalerate) (PHBV) and poly(propylene carbonate) (PPC) were used. The miscibility, chemical structure, thermal behavior, crystallinity, morphology, and mechanical properties of the blends were investigated with Fourier transform infrared spectroscopy, differential scanning calorimetry, polarized optical microscopy, scanning electron microscopy, and tensile tests. A certain extent of hydrogen‐bonding interactions between PHBV and PPC took place in the blends. The graft copolymerization was confirmed in the reactive system. The incorporation of PPC hampered the crystallization process of PHBV and evidently altered the morphology, and the effect was enhanced in the reactive blend. The mechanical properties of PHBV could be changed by 1–2 orders of magnitude by blending modification. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1427–1436, 2005     

Morphology and thermal behavior of poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/poly(butylene adipate‐co‐terephthalate)/clay nanocomposites

Biopolymers are gaining increasing interest because of decline of mineral oil reserves, increasing waste problem, and increasing consciousness of society for environmental problems. However, competitiveness of biopolymers compared with conventional plastics is still limited due to partly insufficient properties and high prices. This study investigates the influence of blending of poly(hydroxybutyrate‐co‐hydroxyvalerate) (PHBV) with poly(butylene adipate‐co‐terephthalate) (PBAT) as well as the influence of addition of functionalized montmorillonite (OMMT) to the blends on morphology and thermal behavior. Dispersion state and morphology of the nanocomposites are studied by X‐ray diffraction as well as scanning electron microscopy. Thermal stability is studied by thermogravimetric analysis and crystallization behavior is studied by differential scanning calorimetry and polarized optical microscopy. With respect to the morphology for the blends it can be seen that the immiscible biopolymers PHBV and PBAT are distributed in interlocking zones. There is a good dispersion and homogeneous distribution of OMMT within the biopolymer blends. The addition of 50% or more PBAT to PHBV as well as the insertion of OMMT enhances thermal stability of PHBV. In the blends, the addition of PBAT retards crystallization of PHBV. The OMMT acts as nucleating agent leading in total to more but less perfect crystals in the blends, and the crystallization slows further due to constraint in the movement of polymer chains. These results contribute to the understanding of the structure–properties relationship of bionanocomposite materials for packaging applications. POLYM. COMPOS., 36:2051–2058, 2015. © 2014 Society of Plastics Engineer     

Mechanical and electrical multifunctional poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)—multiwall carbon nanotube nanocomposites

In this work, nanocomposites of poly(hydroxybutyrate‐co‐hydroxyvalerate) PHBV and multiwalled carbon nanotubes (MWNT) were prepared by melt blending. Mechanical, thermal, morphological, and electrical properties of the prepared PHBV/MWNT nanocomposites were investigated. Differential scanning calorimetry (DSC) and X‐ray diffraction (XRD) results showed MWNT effectively enhanced the crystallization and nucleation of PHBV. Dynamic thermo‐mechanical and static uniaxial mechanical tensile and compressive properties were increased by the addition of MWNT. MWNT observed in the nanocomposites using transmission electron microscopy (TEM) showed dimensions similar to separated nanotubes inferring a good dispersion. The presence of nanotubes in close vicinity with each other formed an interconnecting network that led to the formation of electrically conductive nanocomposites. The electrical resistance of the nanocomposites was reduced with the addition of MWNT. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Thermal analysis of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) irradiated under vacuum

Poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) was irradiated by ⁶⁰Co γ‐rays (doses of 50, 100 and 200 kGy) under vacuum. The thermal analysis of control and irradiated PHBV, under vacuum was carried out by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The tensile properties of control and irradiated PHBV were examined by using an Instron tensile testing machine. In the thermal degradation of control and irradiated PHBV, a one‐step weight loss was observed. The derivative thermogravimetric curves of control and irradiated PHBV confirmed only one weight‐loss step change. The onset degradation temperature (T_o) and the temperature of maximum weight‐loss rate (T_p) of control and irradiated PHBV were in line with the heating rate (°C min^?1). T_o and T_P of PHBV decreased with increasing radiation dose at the same heating rate. The DSC results showed that ⁶⁰Co γ‐radiation significantly affected the thermal properties of PHBV. With increasing radiation dose, the melting temperature (T_m) of PHBV shifted to a lower value, due to the decrease in crystal size. The tensile strength and fracture strain of the irradiated PHBV decreased, hence indicating an increased brittleness. Copyright © 2004 Society of Chemical Industry     

Study of miscibility,crystallization, mechanical properties,and thermal stability of blends of poly(3‐hydroxybutyrate) and poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)

Natural amorphous polymer poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) (P3HB4HB) containing 41 mol % of 4HB was blended with poly(3‐hydroxybutyrate) (PHB) with an aim to improve the properties of PHB. The influence of P3HB4HB contents on thermal and mechanical properties of the blends was evaluated with differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, stress–strain measurement and thermo gravimetric analyzer. Miscibility of PHB/P3HB4HB blends was mainly decided by the contents of P3HB4HB. When P3HB4HB exceeded 50 wt %, the two polymer phases separated and showed immiscibility. The addition of P3HB4HB did not alter the crystallinity of PHB, yet it diluted the PHB crystalline phase as revealed by DSC studies. DSC and FTIR results showed that the overall crystallinity of the blends decreased remarkably with increasing of P3HB4HB contents. Decreased glass transition temperature and crystallinity imparted desired flexibility for the blends. The ductility of the blends increased progressively with increasing of P3HB4HB content. Thus, the PHB mechanical properties can be modulated by changing the blend composition. P3HB4HB did not significantly improve the thermal stability of PHB, yet it is possible to melt process PHB without much molecular weights loss via blending it with suitable amounts of P3HB4HB. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Increasing the compatibility of poly(l‐lactide)/poly(para‐dioxanone) blends through the addition of poly(para‐dioxanone‐co‐l‐lactide)

To modify the mechanical properties of a poly(l ‐lactide) (PLLA)/poly(para‐dioxanone) (PPDO) 85/15 blend, poly(para‐dioxanone‐co‐l ‐lactide) (PDOLLA) was used as a compatibilizer. The 85/15 PLLA/PPDO blends containing 1–5 wt % of the random copolymer PDOLLA were prepared by solution coprecipitation. Then, the thermal, morphological, and mechanical properties of the blends with different contents of PDOLLA were studied via differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and tensile testing, respectively. The DSC result revealed that the addition of PDOLLA into the blends only slightly changed the thermal properties by inhibiting the crystallization degree of the poly(l ‐lactide) in the polymer blends. The SEM photos indicated that the addition of 3 wt % PDOLLA into the blend was ideal for making the interface between the PLLA and PPDO phases unclear. The tensile testing result demonstrated that the mechanical properties of the blends containing 3 wt % PDOLLA were much improved with a tensile strength of 48 MPa and a breaking elongation of 214%. Therefore, we concluded that the morphological and mechanical properties of the PLLA/PPDO 85/15 blends could be tailored by the addition of the PDOLLA as a compatibilizer and that the blend containing a proper content of PDOLLA had the potential to be used as a medical implant material. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41323.     

Miscibility,thermal behaviour,morphology and mechanical properties of binary blends of poly[(R)‐3‐hydroxybutyrate] with poly(γ‐benzyl‐L‐glutamate)+

The miscibility, thermal behaviour, morphology and mechanical properties of poly[(R)‐3‐hydroxybutyrate] (PHB) with poly(γ‐benzyl‐L ‐glutamate) (PBLG) are investigated by means of differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and tensile tests. The DSC results show that PHB and PBLG are immiscible in the melt state. Such immiscibility also exists in the amorphous state due to a clear two‐phase separated structure observed by SEM measurements. The blend samples with different thermal history, namely as original and melt samples separately, display differences in thermal behaviour such as the DSC scan profile, the crystallinity and the melting temperature of PHB. The crystallization of PHB both from the molten state and the amorphous state is retarded on addition of the second component. The SEM measurements reveal that a phase inversion occurs between the PHB/PBLG (60/40) and PHB/PBLG (40/60) blends. Except for the PHB/PBLG (40/60) blend, a microphase separated structure is observed for all blend compositions. The mechanical properties vary considerably with blend composition. Compared with pure components, the PHB/PBLG (20/80) blend shows a certain improvement in mechanical properties. © 2001 Society of Chemical Industry     

Effect of graft modification with poly(N‐vinylpyrrolidone) on thermal and mechanical properties of poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)

Poly(N‐vinylpyrrolidone) (PVP) groups were grafted onto poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) backbone to modify the properties of PHBV and synthesize a new novel biocompatible graft copolymer. The effect of graft modification with PVP on the thermal and mechanical properties of PHBV was investigated. The thermal stability of grafted PHBV was remarkably improved while the melting temperature (T_m) was almost not affected by graft modification. The isothermal crystallization behavior of samples was observed by polarized optical microscopy and the results showed that the spherulitic radial growth rates (G) of grafted PHBV at the same crystallization temperature (T_c) decreased with increasing graft yield (graft%) of samples. Analysis of isothermal crystallization kinetics showed that both the surface free energy (σ_e) and the work of chain‐folding per molecular fold (q) of grafted PHBV increased with increasing graft%, implying that the chains of grafted PHBV are less flexible than ungrafted PHBV. This conclusion was in agreement with the mechanical testing results. The Young's modulus of grafted PHBV increased while the elongation decreased with increasing graft%. The hydrophilicity of polymer films was also investigated by the water contact angle measurement and the results revealed that the hydrophilicity of grafted PHBV was enhanced. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Processability enhancement of poly(lactic acid-co-ethylene terephthalate) by blending with poly(ethylene-co-vinyl acetate), poly(3-hydroxybutyrate-co-3-hydroxyvalerate), and poly(butylene succinate)

Processability enhancement feasibility of an in-house synthesized poly(lactic acid-co-ethylene terephthalate), PLET, is investigated by blending with commercial poly(ethylene-co-vinyl acetate), EVA, poly(3-hydroxybutyrate-co-3-hydroxyvalerate), PHBV, and poly(butylene succinate), PBS. The three blend systems are prepared by varying PLET contents, and their properties are characterized. DSC, SEM, and FTIR results indicate that PLET/EVA blends are immiscible, while the corresponding PLET/PBS and PLET/PHBV blends are miscible and partially miscible, respectively. DMA results show that the three blend systems have storage modulus comparable to those of commercial EVA, PHBV, and PBS, when PLET content is kept lower than 50, 25, and 25 wt%, respectively. PLET/EVA blends show higher thermal stability, compared to those of the other two blend systems. Results on degradability tests indicate that PLET/PBS blends show highest hydrolytic degradability, compared to the other two blends, as both blend constituents are associated in the hydrolytic degradation.     

Compatibility of poly(butadiene‐co‐acrylonitrile) with poly(L‐lactide) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)

Poly(L ‐lactide) (PLLA) and poly(3‐hydrobutyrate‐co‐3‐hydroxyvalerate) (PHBV) were blended with poly(butadiene‐co‐acrylonitrile) (NBR). Both PLLA/NBR and PHBV/NBR blends exhibited higher tensile properties as the content of acrylonitrile unit (AN) of NBR increased from 22 to 50 wt %. However, two separate glass transition temperatures (T_g) appeared in PLLA/NBR blends irrespective of the content of NBR, revealing that PLLA was incompatible with NBR. In contrast, a single T_g, which shifted along with the blend composition, was observed for PHBV/NBR50 blends. Moreover NBR50 suppressed the crystallization of PHBV, indicating that PHBV was compatible with NBR50. Decrease of both elongation modulus and stress at maximum load was less significant and increase of elongation at break was more pronounced in PHBV/NBR50 blends than in PLLA/NBR50 blends. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3508–3513, 2004     

Crystallization and melting behavior of partially miscible six‐armed poly(l‐lactic acid)/poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) blends

The crystallization kinetics and spherulitic morphology of six‐armed poly(L‐lactic acid) (6a‐PLLA)/poly(3‐hydroxybutyrate‐co?3‐hydroxyvalerate) (PHBV) crystalline/crystalline partially miscible blends were investigated with differential scanning calorimetry and polarized optical microscopy in this study. Avrami analysis was used to describe the isothermal crystallization process of the neat polymers and their blends. The results suggest that blending had a complex influence on the crystallization rate of the two components during the isothermal crystallization process. Also, the crystallization mechanism of these blends was different from that of the neat polymers. The melting behavior of these blends was also studied after crystallization at various crystallization temperatures. The crystallization of PHBV at 125°C was difficult, so no melting peaks were found. However, it was interesting to find a weak melting peak, which arose from the PHBV component for the 20/80 6a‐PLLA/PHBV blend after crystallization at 125°C, and it is discussed in detail. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42548.     

Biobased blends of poly(propylene carbonate) and poly(hydroxybutyrate‐co‐hydroxyvalerate): Fabrication and characterization

Poly(propylene carbonate) (PPC), a CO₂‐based bioplastic and poly(hydroxybutyrate‐co‐hydroxyvalerate) (PHBV) were melt blended followed by injection molding. Fourier transform infrared spectroscopy detected an interaction between the macromolecules from the reduction in the OH peak and a shift in the C?O peak. The onset degradation temperature of the polymer blends was improved by 5% and 19% in comparison to PHBV and PPC, respectively. Blending PPC with PHBV reduced the melting and crystallization temperatures and crystallinity of the latter as observed through differential scanning calorimetry. The amorphous nature of PPC affected the thermal properties of PHBV by hindering the spherulitic growth and diluting the crystalline region. Scanning electron micrographs presented a uniform dispersion and morphology of the blends, which lead to balanced mechanical properties. Incorporating PHBV, a stiff semi‐crystalline polymer improved the dimensional stability of PPC by restricting the motion of its polymer chains. © 2016 The Authors Journal of Applied Polymer Science Published by Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44420.     

Miscibility and properties of completely biodegradable blends of poly(propylene carbonate) and poly(butylene succinate)

Completely biodegradable blends of poly (propylene carbonate) (PPC) and poly(butylene succinate) (PBS) were melt‐prepared and then compression‐molded. The miscibilities of the two aliphatic polyesters, that is, PPC and PBS, were investigated by dynamic mechanical analysis (DMA) and scanning electron microscopy (SEM). The static mechanical properties, thermal behaviors, crystalline behavior, and melt flowability of the blends were also studied. Static tensile tests showed that the yield strength and the strength at break increased remarkably up to 30.7 and 46.3 MPa, respectively, with the incorporation of PBS. The good ductility of the blends was maintained in view of the large elongation at break. SEM observation revealed a two‐phase structure with good interfacial adhesion. The immiscibility of the two components was verified by the two independent glass‐transition temperatures obtained from DMA tests. Moreover, thermogravimetric measurements indicated that the thermal decomposition temperatures (T_?5% and T_?10%) of the PPC/PBS blends increased dramatically by 30–60°C when compared with PPC matrix. The melt flow indices of the blends showed that the introduction of PBS improved the melt flowability of the blends. The blending of PPC with PBS provided a practical way to develop completely biodegradable blends with applicable comprehensive properties. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effects of l‐aspartic acid and poly(butylene succinate) on thermal stability and mechanical properties of poly(propylene carbonate)

Poly(propylene carbonate) (PPC) was modified by l ‐aspartic acid (Asp) and poly(butylene succinate) (PBS). To assess the effects of Asp and PBS on the thermal stability, mechanical properties of PPC, different PPC/Asp, PPC/PBS, and PPC/PBS/Asp blends were prepared by twin‐screw extruder. The results indicated that the thermal stability improved with the Asp content increasing from 0.5 to 5%. With trace presence of 2% Asp, the degradation temperature of PPC was greatly increased upon extruding and the Yield strength and Young's modulus increased 62 and 849 times, respectively, at 20°C. The flexibility of PPC was effectively improved by blending with PBS, the PBS has no significant effect on the thermal stability of PPC until PBS up to enough amount. Besides the Asp additive in PPC/PBS blends not only improved the thermal stability PPC, but improved the interfacial compatibility of the blend. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42970.     

Thermal properties of blends of poly(hydroxybutyrate‐co‐hydroxyvalerate) and poly(styrene‐co‐acrylonitrile)

Thermal properties of blends of poly(hydroxybutyrate‐co‐hydroxyvalerate) (PHBV) and poly(styrene‐co‐acrylonitrile) (SAN) prepared by solution casting were investigated by differential scanning calorimetry. In the study of PHBV‐SAN blends by differential scanning calorimetry, glass transition temperature and melting point of PHBV in the PHBV‐SAN blends were almost unchanged compared with those of the pure PHBV. This result indicates that the blends of PHBV and SAN are immiscible. However, crystallization temperature of the PHBV in the blends decreased approximately 9–15°. From the results of the Avrami analysis of PHBV in the PHBV‐SAN blends, crystallization rate constant of PHBV in the PHBV‐SAN blends decreased compared with that of the pure PHBV. From the above results, it is suggested that the nucleation of PHBV in the blends is suppressed by the addition of SAN. From the measured crystallization half time and degree of supercooling, interfacial free energy for the formation of heterogeneous nuclei of PHBV in the PHBV‐SAN blends was calculated and found to be 2360 (mN/m)³ for the pure PHBV and 2920–3120 (mN/m)³ for the blends. The values of interfacial free energy indicate that heterogeneity of PHBV in the PHBV‐SAN blends is deactivated by the SAN. This result is consistent with the results of crystallization temperature and crystallization rate constant of PHBV in the PHBV‐SAN blends. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 673–679, 2000     

Crystallization and mechanical behavior of covalent functionalized carbon nanotube/poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) nanocomposites

To improve the dispersity of multi‐walled carbon nanotubes (MWCNTs) in poly(3‐hydroxybutyrate‐co?3‐hydroxyvalerate) (PHBV) matrix, MWCNTs functionalized with carboxyl groups, hydroxyl groups, and atactic poly (3‐hydroxybutyrate) (ataPHB) through acid oxidation, esterification reaction, and “grafting from” method, respectively, were used to fabricate nanofiller/PHBV nanocomposites. The crystallization behavior, dispersion of MWCNTs before and after functionalization in PHBV matrices, and mechanical properties of a series of nanocomposites were investigated. The differential scanning calorimetry, wide‐angle X‐ray diffraction, and polarized optical microscope results suggested that the four types of MWCNTs acted as effective heterogeneous nucleation agents, inducing an increase in the crystallization rate, crystallinity, and crystallite size. Scanning electron microscope observations demonstrated that functionalized MWCNTs showed improved dispersion comparing with MWCNTs, suggesting an enhanced interfacial interaction between PHBV and functionalized MWCNTs. Consequently, the mechanical properties of the functionalized MWCNTs/PHBV nanocomposites have been improved as evident from dynamic mechanical and static tensile tests. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42136.