High reversible capacity of SnO2/graphene nanocomposite as an anode material for lithium-ion batteries

A gas–liquid interfacial synthesis approach has been developed to prepare SnO₂/graphene nanocomposite. The as-prepared nanocomposite was characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, and Brunauer–Emmett–Teller measurements. Field emission scanning electron microscopy and transmission electron microscopy observation revealed the homogeneous distribution of SnO₂ nanoparticles (2–6 nm in size) on graphene matrix. The electrochemical performances were evaluated by using coin-type cells versus metallic lithium. The SnO₂/graphene nanocomposite prepared by the gas–liquid interface reaction exhibits a high reversible specific capacity of 1304 mAh g⁻¹ at a current density of 100 mA g⁻¹ and excellent rate capability, even at a high current density of 1000 mA g⁻¹, the reversible capacity was still as high as 748 mAh g⁻¹. The electrochemical test results show that the SnO₂/graphene nanocomposite prepared by the gas–liquid interfacial synthesis approach is a promising anode material for lithium-ion batteries.     

Molten hydroxides synthesis of hierarchical cobalt oxide nanostructure and its application as anode material for lithium ion batteries

Hierarchical Co₃O₄ nanostructure is synthesized via a self-assembled process in molten hydroxides. The morphologies, crystal structures and the phase transformation processes are analyzed by field-emission scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. As an anode material for lithium ion batteries, the hierarchical Co₃O₄ exhibit an initial capacity of 1336 mAh g⁻¹ and a stable capacity of 680 mAh g⁻¹ over 50 cycles. More importantly, high rate capability is obtained at different current densities between 140 and 1120 mA g⁻¹. The improved electrochemical performance of Co₃O₄ could be attributed to the unique hierarchical nanostructure.     

Electrochemical properties of bare and Ta-substituted Nb2O5 nanostructures

In this work, bare and Ta-substituted Nb₂O₅ nanofibers are prepared by electrospinning followed by sintering at temperatures in the 800–1100 °C range for 1 h in air. Obtained bare and Ta-substituted Nb₂O₅ polymorphs are characterized by X-ray diffraction, scanning electron microscopy, density measurement, and Brunauer, Emmett and Teller surface area. Electrochemical properties are evaluated by cyclic voltammetry and galvanostatic techniques. Cycling performance of Nb₂O₅ structures prepared at temperature 800 °C, 900 °C, and 1100 °C shows following discharge capacity at the end of 10th cycle: 123, 140, and 164 (±3) mAh g⁻¹, respectively, in the voltage range 1.2–3.0 V and at current rate of 150 mA g⁻¹ (1.5 C rate). Heat treated composite electrode based on M-Nb₂O₅ (1100 °C) in argon atmosphere at 220 °C, shows an improved discharge capacity of 192 (±3) mAh g⁻¹ at the end of 10th cycle. The discharge capacity of Ta-substituted Nb₂O₅ prepared at 900 °C and 1100 °C showed a reversible capacity of 150, 202 (±3) mAh g⁻¹, respectively, in the voltage range 1.2–3.0 V and at current rate of 150 mA g⁻¹. Anodic electrochemical properties of M-Nb₂O₅ deliver a reversible capacity of 382 (±5) mAh g⁻¹ at the end of 25th cycle and Ta-substituted Nb₂O₅ prepared at 900 °C, 1000 °C and 1100 °C shows a reversible capacity of 205, 130 and 200 (±3) mAh g⁻¹ (at 25th cycle) in the range, 0.005–2.6 V, at current rate of 100 mA g⁻¹.     

Co3O4 thin film prepared by a chemical bath deposition for electrochemical capacitors

Co₃O₄ thin film is synthesized on ITO by a chemical bath deposition. The prepared Co₃O₄ thin film is characterized by X-ray diffraction, and scanning electron microscopy. Electrochemical capacitive behavior of synthesized Co₃O₄ thin film is investigated by cyclic voltammetry, constant current charge/discharge and electrochemical impedance spectroscopy. Scanning electron microscopy images show that Co₃O₄ thin film is composed of spherical-like coarse particles, together with some pores among particles. Electrochemical studies reveal that capacitive characteristic of Co₃O₄ thin film mainly results from pseudocapacitance. Co₃O₄ thin film exhibits a maximum specific capacitance of 227 F g⁻¹ at the specific current of 0.2 A g⁻¹. The specific capacitance reduces to 152 F g⁻¹ when the specific current increases to 1.4 A g⁻¹. The specific capacitance retention ratio is 67% at the specific current range from 0.2 to 1.4 A g⁻¹.     

High capacity ZnFe2O4 anode material for lithium ion batteries

A nanostructured ternary transition metal oxide, ZnFe₂O₄, is synthesized via the simple polymer pyrolysis method. The characteristics of the material are examined by thermogravimetry, Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The electrochemical test results show that this method of ZnFe₂O₄ synthesis produces high specific capacities and good cycling performance, with an initial specific capacity as high as 1419.6 mAh g⁻¹ at first discharge that is maintained at over 800 mAh g⁻¹ even after 50 charge–discharge cycles. The electrode also presents a good rate capability, with a high rate of 4C (1C = 928 mA g⁻¹), a reversible specific capacity that can be as high as 400 mAh g⁻¹. ZnFe₂O₄ is a potential alternative to high-performance nanostructured anode material in lithium ion batteries.     

Free-standing SnO2 nanoparticles@graphene hybrid paper for advanced lithium-ion batteries

A free-standing SnO₂/reduced graphene oxide (re-G) hybrid paper has been successfully fabricated by a facile vacuum filtration approach through a uniformly dispersed SnO₂ nanoparticle and graphene oxide mixed solution. As potential anode material for high power and energy applications, the hybrid nanostructures were directly evaluated as anode for rechargeable lithium ion batteries without adding any polymer binder, conductive additives or current collectors. And the composite exhibits a greatly enhanced synergic effect with extremely high energy storage stability of 700 mAh g⁻¹ after 100 cycles benefiting from the advanced structural features.     

Enhanced cycling performance of Fe3O4-graphene nanocomposite as an anode material for lithium-ion batteries

Fe₃O₄-graphene nanocomposite was prepared by a gas/liquid interface reaction. The structure and morphology of the Fe₃O₄-graphene nanocomposite were characterized by X-ray diffraction, scanning electron microscopy and high-resolution transmission electron microscopy. The electrochemical performances were evaluated in coin-type cells. Electrochemical tests show that the Fe₃O₄-22.7 wt.% graphene nanocomposite exhibits much higher capacity retention with a large reversible specific capacity of 1048 mAh g⁻¹ (99% of the initial reversible specific capacity) at the 90th cycle in comparison with that of the bare Fe₃O₄ nanoparticles (only 226 mAh g⁻¹ at the 34th cycle). The enhanced cycling performance can be attributed to the facts that the graphene sheets distributed between the Fe₃O₄ nanoparticles can prevent the aggregation of the Fe₃O₄ nanoparticles, and the Fe₃O₄-graphene nanocomposite can provide buffering spaces against the volume changes of Fe₃O₄ nanoparticles during electrochemical cycling.     

Microwave-assisted one-pot synthesis of SnC2O4/graphene composite anode material for lithium-ion batteries

Currently, SnC₂O₄ is considered as one of the most promising anode materials for high-energy lithium-ion batteries (LIBs) because its charge capacity is higher than that of metal oxides. Herein, a facile microwave-assisted solvothermal method was employed to obtain SnC₂O₄/GO composites within only 30?min, which is time-efficient. The amount of SnC₂O₄ was increased to 95.3?wt% to improve the capacity of the composite. Pure SnC₂O₄ with a high specific surface area of 19.6?m² g^?1 without any other tin compound was used for fabrication. The SnC₂O₄/GO composite exhibited excellent electrochemical performance, with reversible discharge/charge capacity of 657/659?mA?h?g^?1 after 100 cycles at 0.2?A?g^?1. Furthermore, at high current densities of 1.0 and 2.0?A?g^?1, the SnC₂O₄/GO composite anode exhibited high reversible discharge/charge capacities of 553/552 and 418/414?mA?h?g^?1, respectively, after 200 cycles at room temperature. These improvements were likely obtained because SnC₂O₄ was well composited with graphene, which not only offered rapid electron transfer but also released the tension produced by the volumetric effect during repeated lithiation/delithiation. Cyclic voltammetry (CV) was also performed to further study the electrochemical reactions of SnC₂O₄/GO. The facile microwave-assisted solvothermal method used herein is considered as a highly efficient method to fabricate metal oxalate/graphene composites for use as anode materials in LIBs.     

Hydrothermal synthesis of Co3O4 microspheres as anode material for lithium-ion batteries

Co₃O₄ microspheres were synthesized in mass production by a simple hydrothermal treatment. One micrometer-sized spherical particles with well-crystallization could be obtained by XRD and SEM. Higher specific surface area (93.4 m² g⁻¹) and larger pore volume (78.4 cm³ g⁻¹) by BET measurements offered more interfacial bondings for extra sites of Li⁺ insertion, which resulted in the anomalous large initial irreversible capacity and capacity cycling loss due to SEI film formation. The capacity retention of Co₃O₄ microspheres involved first forming acted as Li-ion anode material is almost above 90% from 12th cycle and it retain lithium storage capacity of 550.2 mAh g⁻¹ after 25 cycles, which show good long-life stability. The electrochemical impedance spectroscopy (EIS) tests before and after cyclic voltammetry measurements and charge-discharge experiments were carried out and the corresponding D_Li values were also calculated. The relationship of the ac impedance spectra and the cycling behaviors was discussed. It is found that the decrease of capacity results from the larger Li⁺ charge-transfer impedance and the lower lithium-diffusion processes on cycling, which is in very good agreement with the electrochemical behaviors of Co₃O₄ electrode.     

Wrapping mesoporous Fe2O3 nanoparticles by reduced graphene oxide: Enhancement of cycling stability and capacity of lithium ion batteries by mesoscopic engineering

The fast capacity fading at high current density turns out to be one of the key challenges limiting the broad applications of transition metal oxide-based electrodes. Herein, Fe₂O₃ nanoparticles with well-defined mesopores wrapped by reduced graphene oxide (RGO) have been synthesized via a facile hydrothermal strategy. The as-prepared nanocomposites were systematically characterized. XPS and Raman analyses confirm the co-existence of Fe₂O₃ and RGO in the nanocomposite system. SEM and TEM reveal that the mesoporous Fe₂O₃ nanoparticles have a size of 20–60?nm and are uniformly dispersed and tightly wrapped by RGO. When used as the anode in lithium ion batteries, the mesoporous-Fe₂O₃/RGO electrode exhibits excellent cycling stability (1098?mA?h?g^?1 after 500 cycles at 1?A?g^?1) and superior rate capability (574?mA?h?g^?1 at 5?A?g^?1). The excellent electrochemical performance can be mainly ascribed to the unique mesoscopic architecture that serves as a cushion to alleviate volume change of Fe₂O₃ during discharge/charge cycles, provides a sustainably large contact area with the electrolyte, and improves electrical conductivity. This unique nanocomposite electrode holds great potential as an anode material for advanced lithium ion batteries.     

A new rechargeable lithium-ion battery with a xLi2MnO3·(1 − x) LiMn0.4Ni0.4Co0.2O2 cathode and a hard carbon anode

We reported a new type of rechargeable lithium-ion battery consisting of a structurally integrated 0.4Li₂MnO₃·0.6LiMnNi_0.4Co_0.2O₂ cathode and a hard carbon anode. The drawback of the high irreversible capacity loss of both electrodes, occurring at the first charge/discharge process, can be counterbalanced each other. The battery shows good reversibility with a sloping voltage from 1.5 V to 4.5 V and delivers a capacity of 105 mA h g⁻¹ and a specific energy of 315 W h kg⁻¹ based on the total weight of the both active electrode materials.     

Rapid microwave-assisted synthesis of graphene nanosheet/Co3O4 composite for supercapacitors

Graphene nanosheet (GNS)/Co₃O₄ composite has been rapidly synthesized by microwave-assisted method. Field emission scanning electron microscopy and transmission electron microscopy observation reveals the homogeneous distribution of Co₃O₄ nanoparticles (3-5 nm in size) on graphene sheets. Electrochemical properties are characterized by cyclic voltammetry, galvanostatic charge/discharge and electrochemical impedance spectroscopy. A maximum specific capacitance of 243.2 F g⁻¹ has been obtained at a scan rate of 10 mV s⁻¹ in 6 M KOH aqueous solution for GNS/Co₃O₄ composite. Furthermore, the composite exhibits excellent long cycle life along with ∼95.6% specific capacitance retained after 2000 cycle tests.     

LiNi0.8Co0.15Al0.05O2 cathode materials prepared by TiO2 nanoparticle coatings on Ni0.8Co0.15Al0.05(OH)2 precursors

Synthesis, electrochemical, and structural properties of LiNi_0.8Co_0.15Al_0.05O₂ cathodes prepared by TiO₂ nanoparticles coating on a Ni_0.8Co_0.15Al_0.05(OH)₂ precursor have been investigated by the variation of coating concentration and annealing temperature. TiO₂-coated cathodes showed that Ti elements were distributed throughout the particles. Among the coated cathodes, the 0.6 wt% TiO₂-coated cathode prepared by annealing at 750 °C for 20 h exhibited the highest reversible capacity of 176 mAh g⁻¹ and capacity retention of 92% after 40 cycles at a rate of 1C (=190 mA g⁻¹). On the other hand, an uncoated cathode showed a reversible first discharge capacity of 186 mAh g⁻¹ and the same capacity retention value to the TiO₂-coated sample at a 1C rate. However, under a 1C rate cycling at 60 °C for 30 cycles, the uncoated sample showed a reversible capacity of 40 mAh g⁻¹, while a TiO₂-coated one showed 71 mAh g⁻¹. This significant improvement of the coated sample was due to the formation of a possible solid solution between TiO₂ and LiNi_0.8Co_0.15Al_0.05O₂. This effect was more evident upon annealing the charged sample while increasing the annealing temperature, and at 400 °C, the coated one showed a more suppressed formation of the NiO phase from the spinel LiNi₂O₄ phase than the uncoated sample.     

Pseudocapacitive properties of electrodeposited porous nanowall Co3O4 film

A porous nanowall Co₃O₄ film is prepared by a facile cathodic electrodeposition. The as-prepared porous nanowall Co₃O₄ film shows a net-like porous structure with huge porosity. The porous network is made up of free standing interconnected Co₃O₄ nanoflakes with a thickness of 20 nm. As cathode material for pseudocapacitors, porous nanowall Co₃O₄ film exhibits weaker polarization, higher electrochemical reactivity and better cycling performance as compared to the dense Co₃O₄ film. The specific capacitance of porous nanowall Co₃O₄ film is 325 F g⁻¹ at 2 A g⁻¹ and 247 F g⁻¹ at 40 A g⁻¹, respectively, much higher than that of the dense Co₃O₄ film (230 F g⁻¹ at 2 A g⁻¹ and 167 F g⁻¹ at 40 A g⁻¹). The better pseudocapacitive performances of the porous nanowall Co₃O₄ film are attributed to its highly porous morphology, which provides large reaction surface and short ion diffusion paths, and relaxes the volume change caused by the reaction during the cycling process.     

High capacity three-dimensional ordered macroporous CoFe2O4 as anode material for lithium ion batteries

A three-dimensional ordered macroporous (3DOM) cobalt ferrite (CoFe₂O₄) was prepared using polystyrene (PS) colloidal crystal template. The scanning electron microscopy (SEM) and the transmission electron microscopy (TEM) micrographs showed that the as-prepared CoFe₂O₄ material had a typical 3DOM structure, which was constructed with about 130 nm-sized macropores and 10-20 nm-sized walls. The obtained CoFe₂O₄ material had a specific surface area of 66.67 m² g⁻¹, and could deliver a relatively high capacity of 702 mAh g⁻¹ (about double that of graphite) at a current density of 0.2 mA cm⁻² after 30 cycles. Owing to the 3DOM nanoarchitecture, the as-prepared CoFe₂O₄ electrode exhibited a good rate performance. The results suggest a promising application of the 3DOM CoFe₂O₄ as anode material for lithium ion batteries.     

Effect of synthesis condition on the structural and electrochemical properties of Li[Ni1/3Mn1/3Co1/3]O2 prepared by the metal acetates decomposition method

In order to get homogeneous layered oxide Li[Ni_1/3Mn_1/3Co_1/3]O₂ as a lithium insertion positive electrode material, we applied the metal acetates decomposition method. The oxide compounds were calcined at various temperatures, which results in greater difference in morphological (shape, particle size and specific surface area) and the electrochemical (first charge profile, reversible capacity and rate capability) differences. The Li[Ni_1/3Mn_1/3Co_1/3]O₂ powders were characterized by means of X-ray diffraction (XRD), charge/discharge cycling, cyclic voltammetry and SEM. XRD experiment revealed that the layered Li[Ni_1/3Mn_1/3Co_1/3]O₂ material can be best synthesized at temperature of 800 °C. In that synthesized temperature, the sample showed high discharge capacity of 190 mAh g⁻¹ as well as stable cycling performance at a current density of 0.2 mA cm⁻² in the voltage range 2.3-4.6 V. The reversible capacity after 100 cycles is more than 190 mAh g⁻¹ at room temperature.     

In-situ grown hierarchical ZnCo2O4 nanosheets on nickel foam as binder-free anode for lithium ion batteries

Nickle foam-supported hierarchical ZnCo₂O₄ nanosheets was prepared via a facile solution-based method. Porous ZnCo₂O₄ nanosheets were in-situ grown on current collector, forming a binder-free electrode. When evaluated as anode for Lithium ion batteries (LIB_S), the binder-free electrode showed an attractive electrochemical performance. A reversible capacity of 773?mAh?g^?1 could be stably delivered after a 500-cycle test at a current density of 0.25?A?g^?1, with a high capacity retention of 87%. The electrode could maintain a high reversible capacity of 245?mA?h?g^?1 even at an elevated current density of 8.0?A?g^?1. Integrated structure and rich porosity of the binder-free electrode were believed to contribute to the superior performance. Thus, the Nickle foam-supported ZnCo₂O₄ electrode is a promising anode for high performance LIBs in the coming future.     

Hollow CuFe2O4 spheres encapsulated in carbon shells as an anode material for rechargeable lithium-ion batteries

We report here a polymer-templated hydrothermal growth method and subsequent calcination to achieve carbon coated hollow CuFe₂O₄ spheres (H–CuFe₂O₄@C). This material, when used as anode for Li-ion battery, retains a high specific capacity of 550 mAh g⁻¹ even after the 70th cycle, which is much higher than those of both CuFe₂O₄@C (∼300 mAh g⁻¹) and H–CuFe₂O₄ (∼120 mAh g⁻¹). And galvanostatic cycling at different current densities reveals that a capacity of 480 mAh g⁻¹, 91% recovery of the specific capacity cycling at 100 mA g⁻¹, can be obtained even after 50 cycles running from 100 to 1600 mA g⁻¹. The significantly enhanced electrochemical performances of H–CuFe₂O₄@C with regard to Li-ion storage are ascribed to the following factors: (1) the hollow void, which could mitigate the pulverization of electrode and facilitate the lithium-ion, electron and electrolyte transport; (2) the conductive carbon coating, which could enhance the conductivity, alleviate the agglomeration problem, prevent the formation of an overly thick SEI film and buffer the electrode. Such a structural motif of H–CuFe₂O₄@C is promising, for electrode materials of LIBs, and points out a general strategy for creating other hollow-shell electrode materials with improved electrochemical performances.     

Facile synthesis of Co3O4 nanoflowers grown on Ni foam with superior electrochemical performance

Novel large-scale Co₃O₄ nanoflower (NF) structures on Ni foam are prepared for the first time via a general two-step synthesis. Through a controllable solvothermal process and hereafter with a post-calcination process in air, the NFs have been grown firmly on Ni foam, which is convenient for the construction of supercapacitors without any extra electrode preparation process. The pore sizes and the amount of Co₃O₄ NFs can be tuned through different post-calcination and solvothermal conditions, respectively. The electrochemical properties of the NFs are tested by cyclic voltammetry, galvanostatic charge–discharge in 6.0 M KOH solution. The results show that the NFs can have a specific capacitance of 1936.7 F g⁻¹ at a current density of 0.2 A g⁻¹ and a capacity retention of 78.2% after 1000 cycles at a current density of 3 A g⁻¹ (1309.4 F g⁻¹). The Co₃O₄ NFs grown on Ni foam with large area and superior electrochemical performance have great potential application in supercapacitors.     

Novel high-capacity hybrid layered oxides NaxLi1.5-xNi0.167Co0.167Mn0.67O2 as promising cathode materials for rechargeable sodium ion batteries

Relatively low capacity is a technological bottleneck of the development of sodium ion batteries. Herein, we present a series of hybrid layered cathode materials Na_xLi_1.5-xNi_0.167Co_0.167Mn_0.67O₂ (x?=?0.5, 0.6, 0.7, 0.8, 0.9, 1) with composite crystalline structures, which are prepared by co-precipitation method. The combined analysis of XRD, SEM and TEM reveals that the materials are composed of P2 structure, α-NaFeO₂ structure and small amount of Li₂MnO₃. Among the as-prepared materials, Na_0.6Li_0.9Ni_0.167Co_0.167Mn_0.67O₂ delivers an initial reversible capacity of 222?mA?h?g^?1 at 20?mA?g^?1. Even at 100?mA?g^?1, it shows a remarkable discharge capacity of 125?mA?h?g^?1 in the first cycle and remains 60?mA?h?g^?1 after 300 cycles. Such high capacity is achieved by the specific composite structure and sodium ions are proved to be able to intercalate/deintercalate in Li_1.5Ni_0.167Co_0.167Mn_0.67O₂ with α-NaFeO₂ structure. The Ex-situ XRD results of Na_0.6Li_0.9Ni_0.167Co_0.167Mn_0.67O₂ in the first cycle show that the P2 structure is well maintained along with irreversible phase transition of α-NaFeO₂ structure, which is responsible for the long-term capacity fading. Owing to the high discharge capacity, the novel hybrid layered oxides Na_xLi_1.5-xNi_0.167Co_0.167Mn_0.67O₂ with composite structures can be considered as promising cathode materials to promote progress toward sodium-ion batteries.