Life cycle assessment of a micromorph photovoltaic system

In this paper the results from a in-depth life cycle analysis of production and use of a novel grid-connected photovoltaic micromorph system are presented and compared to other thin film and traditional crystalline silicon photovoltaic technologies. Among the new thin film technologies, the micromorph tandem junction appears to be one of the most promising devices from the industrial point of view. The analysis was based on actual production data given to the authors directly from the PRAMAC Swiss Company and it is consistent with the recommendations provided by the ISO norms and updates. The gross energy requirement, green house gas emissions and energy pay-back time have been calculated for the electric energy output virtually generated by the studied system in a lifetime period of 20 years. A comparative framework is also provided, wherein results obtained for the case study are compared with data from literature previously obtained for the best commercially available competing photovoltaic technologies. Results clearly show a significant decrease in gross energy requirement, in green house gas emissions and also a shorter energy pay-back time for the micromorph technology.     

Life cycle assessment of photovoltaic electricity generation

The paper presents the results of a life cycle assessment (LCA) of the electric generation by means of photovoltaic panels. It considers mass and energy flows over the whole production process starting from silica extraction to the final panel assembling, considering the most advanced and consolidate technologies for polycrystalline silicon panel production. Some considerations about the production cycle are reported; the most critical phases are the transformation of metallic silicon into solar silicon and the panel assembling. The former process is characterised by a great electricity consumption, even if the most efficient conversion technology is considered, the latter by the use of aluminium frame and glass roofing, which are very energy-intensive materials. Moreover, the energy pay back time (EPBT) and the potential for CO₂ mitigation have been evaluated, considering different geographic collocations of the photovoltaic plant with different values of solar radiation, latitude, altitude and national energetic mix for electricity production.     

Life cycle assessment study of a 4.2 kWp stand-alone photovoltaic system

The energetic and environmental life cycle assessment of a 4.2 kW_p stand-alone photovoltaic system (SAPV) at the University of Murcia (south-east of Spain) is presented. PV modules and batteries are the energetically and environmentally most expensive elements. The energy pay-back time was found to be 9.08 years and the specific CO₂ emissions was calculated as 131 g/kWh. The SAPV system has been environmentally compared with other supply options (diesel generator and Spanish grid) showing lower impacts in both cases. The results show the CO₂-emission reduction potential of SAPV systems in southern European countries and point out the critical environmental issues in these systems.     

Life cycle cost analysis of HPVT air collector under different Indian climatic conditions

In this communication, a study is carried out to evaluate an annual thermal and exergy efficiency of a hybrid photovoltaic thermal (HPVT) air collector for different Indian climate conditions, of Srinagar, Mumbai, Jodhpur, New Delhi and Banglore. The study has been based on electrical, thermal and exergy output of the HPVT air collector. Further, the life cycle analysis in terms of cost/kWh has been carried out. The main focus of the study is to see the effect of interest rate, life of the HPVT air collector, subsidy, etc. on the cost/kWh HPVT air collector. A comparison is made keeping in view the energy matrices. The study reveals that (i) annual thermal and electrical efficiency decreases with increase in solar radiation and (ii) the cost/kWh is higher in case of exergy when compared with cost/kWh on the basis of thermal energy for all climate conditions. The cost/kWh for climate conditions of Jodhpur is most economical.     

Life cycle assessment study of solar PV systems: An example of a 2.7 kWp distributed solar PV system in Singapore

In life cycle assessment (LCA) of solar PV systems, energy pay back time (EPBT) is the commonly used indicator to justify its primary energy use. However, EPBT is a function of competing energy sources with which electricity from solar PV is compared, and amount of electricity generated from the solar PV system which varies with local irradiation and ambient conditions. Therefore, it is more appropriate to use site-specific EPBT for major decision-making in power generation planning. LCA and life cycle cost analysis are performed for a distributed 2.7 kW_p grid-connected mono-crystalline solar PV system operating in Singapore. This paper presents various EPBT analyses of the solar PV system with reference to a fuel oil-fired steam turbine and their greenhouse gas (GHG) emissions and costs are also compared. The study reveals that GHG emission from electricity generation from the solar PV system is less than one-fourth that from an oil-fired steam turbine plant and one-half that from a gas-fired combined cycle plant. However, the cost of electricity is about five to seven times higher than that from the oil or gas fired power plant. The environmental uncertainties of the solar PV system are also critically reviewed and presented.     

A case study of a typical 2.32 kWP stand-alone photovoltaic (SAPV) in composite climate of New Delhi (India)

This paper presents rigorous experimental outdoor performance of a 2.32 kW_P stand-alone photovoltaic (SAPV) system in New Delhi (India) for four weather types in each month such as clear, hazy, partially cloudy/foggy and fully cloudy/foggy weather conditions respectively. The daily power generated from the existing SAPV system was experimentally found in the range of 4–6 kW h/day depending on the prevailing sky conditions. The number of days and daily power generated corresponding to four weather types in each month were used to determine monthly and subsequently annual power generation from the existing SAPV system. There are three daily load profiles with and without earth to air heat exchanger suitable for three seasons like summer (3.75–6.15 kW h/day), winter (2.79–5.19 kW h/day) and rainy (3.75 kW h/day). The hourly efficiency of the SAPV system components are determined and presented in this paper. The life cycle cost (LCC) analysis for the existing typical SAPV system is carried out to determine unit cost of electricity. The effect of annual degradation rate of PV system efficiency is also presented in this paper. The energy production factor (EPF) and the energy payback time (EPBT) of the SAPV system was also determined and presented in this paper.     

Life-cycle assessment of a photovoltaic system in Catalonia (Spain)

The life-cycle analysis (LCA) of photovoltaic (PV) systems is an important tool to quantify the potential environmental advantage of using solar technologies versus more traditional technologies, especially the ones relying on non-renewable fossil fuel sources.This work performs a life-cycle assessment on a 200 kW roof top photovoltaic (PV) system with polycrystalline silicon modules and evaluates the net energy pay-back and greenhouse gas emission rates. The performed life-cycle assessment “upstream” and “downstream” processes are considered, such as raw materials production, fabrication of system components, transportation and installation. The energy pay-back time ratio is determined for the installed technology and two other technologies of PV modules (monocrystalline and thin-film).The analysed PV system, located in Pineda de Mar (Catalonia, Spain), has an energy pay-back time ratio of 4.36 years. Furthermore, a sensibility analysis on solar radiation has been performed.     

Life cycle assessment of power generation alternatives for a stand-alone mobile house

This paper presents comparative life cycle assessment of nine different hybrid power generation solutions that meet the energy demand of a prototypical mobile home. In these nine solutions, photovoltaic panels and a wind turbine are used as the main energy source. Fuel cell and diesel generator are utilized as backup systems. Batteries, compressed H₂, and H₂ in metal hydrides are employed as backup energy storage. The findings of the study shows that renewable energy sources, although they are carbon-free, are not as environmentally friendly as may generally be thought. The comparative findings of this study indicate that a hybrid system with a wind turbine as a main power source and a diesel engine as backup power system is the most environmentally sound solution among the alternatives.     

Life cycle assessment of small-scale high-input Jatropha biodiesel production in India

In the current scenario of depleting energy resources, increasing food insecurity and global warming, Jatropha has emerged as a promising energy crop for India. The aim of this study is to examine the life cycle energy balance for Jatropha biodiesel production and greenhouse gas emissions from post-energy use and end combustion of biodiesel, over a period of 5 years. It’s a case specific study for a small scale, high input Jatropha biodiesel system. Most of the existing studies have considered low input Jatropha biodiesel system and have used NEB (Net energy balance i.e. difference of energy output and energy input) and NER (Net energy ratio i.e. ratio of energy output to energy input) as indicators for estimating the viability of the systems. Although, many of them have shown these indicators to be positive, yet the values are very less. The results of this study, when compared with two previous studies of Jatropha, show that the values for these indicators can be increased to a much greater extent, if we use a high input Jatropha biodiesel system. Further, when compared to a study done on palm oil and Coconut oil, it was found even if the NEB and NER of biodiesel from Jatropha were lesser in comparison to those of Palm oil and Coconut oil, yet, when energy content of the co-products were also considered, Jatropha had the highest value for both the indicators in comparison to the rest two.     

Life cycle assessment for photovoltaic integrated shading system with different end of life phases

The aim of this study is to conduct a novel life cycle assessment (LCA) process for a window-mounted building attached photovoltaic panel that is used as a photovoltaic integrated shading (PVIS) device, using GaBi software. Also, the study takes into consideration three different scenarios of the LCA process to reach the most environmentally-friendly system. The three scenarios differ mainly in the end of life processes phase, which in response affects the inputs of the stages within the LCA process. The newly proposed end of life phases are disposing the wastes in the landfill scenario, recycling scenario and recovery scenario. The results showed that the 30 Wp PVIS is environmentally wise to apply to buildings. For the three proposed scenarios, the highest emissions are generated during the production and end of life phases. Consequently, the recycling and the recovery scenarios are more environmentally-friendly in the long run compared to the landfill scenario.     

Life cycle assessment and evaluation of energy payback time on high-concentration photovoltaic power generation system

In this study, the environmental load of photovoltaic power generation system (PV) during its life cycle and energy payback time (EPT) are evaluated by LCA scheme. Two hypothetical case studies in Toyohashi, Japan and Gobi dessert in China have been carried out to investigate the influence of installation location and PV type on environmental load and EPT. The environmental load and EPT of a high-concentration photovoltaic power generation system (hcpV) and a multi-crystalline silicon photovoltaic power generation system (mc-Si PV) are studied. The study shows for a PV of 100 MW size, the total impacts of the hcpV installed in Toyohashi is larger than that of the hcpV installed in Gobi desert by 5% without consideration of recycling stage. The EPT of the hcpV assumed to be installed in Gobi desert is shorter than EPT of the hcpV assumed to be installed in Toyohashi by 0.64 year. From these results, the superiority to install PV in Gobi desert is certificated. Comparing with hcpV and mc-Si PV, the ratio of the total impacts of mc-Si PV to that of hcpV is 0.34 without consideration of recycling stage. The EPT of hcpV is longer than EPT of mc-Si PV by 0.27 year. The amount of global solar radiation contributing to the amount of power generation of mc-Si PV is larger than the amount of direct solar radiation contributing to the amount of power generation of hcpV by about 188 kW h/(m² year) in Gobi desert. Consequently, it appears that using mc-Si PV in Gobi desert is the best option.     

Life cycle assessment of a solar thermal collector

The renewable energy sources are often presented as ‘clean’ sources, not considering the environmental impacts related to their manufacture. The production of the renewable plants, like every production process, entails a consumption of energy and raw materials as well as the release of pollutants. Furthermore, the impacts related to some life cycle phases (as maintenance or installation) are sometimes neglected or not adequately investigated.The energy and the environmental performances of one of the most common renewable technologies have been studied: the solar thermal collector for sanitary warm water demand. A life cycle assessment (LCA) has been performed following the international standards of series ISO 14040. The aim is to trace the product's eco-profile that synthesises the main energy and environmental impacts related to the whole product's life cycle. The following phases have been investigated: production and deliver of energy and raw materials, production process, installation, maintenance, disposal and transports occurring during each step. The analysis is carried out on the basis of data directly collected in an Italian factory.     

Life cycle assessment (LCA) and life cycle cost (LCC) analysis model for a stand-alone hybrid renewable energy system

Nowadays the biggest challenge for most organizations is a real and substantial application of sustainability through the measurement and comparability of results in order to satisfy the principles of sustainability of all the stakeholders. Definitively, it is necessary to pursue sustainability through the measurements of specific indicators and control the variables that influence the state of the economic, social and environmental issues. The aim of this paper is to contribute to the development of a comprehensive, yet practical and reliable tool for a systematic sustainability assessment, based on the Life Cycle Assessment (LCA) and the Analytic Hierarchy Process (AHP) to support decision makers in complex decision problems in the field of environmental sustainability. The results are applied to a novel compressed air energy storage system proposed as a suitable technology for the energy storage in a small scale stand-alone renewable energy power plant (photovoltaic power plant) that is designed to satisfy the energy demand of a radio base station for mobile telecommunications. The outcome is a dynamic analysis and iterative integrated sustainability assessment of corporate performance.     

Life cycle cost analysis of single slope hybrid (PV/T) active solar still

This paper presents the life cycle cost analysis of the single slope passive and hybrid photovoltaic (PV/T) active solar stills, based on the annual performance at 0.05 m water depth. Effects of various parameters, namely interest rate, life of the system and the maintenance cost have been taken into account. The comparative cost of distilled water produced from passive solar still (Rs. 0.70/kg) is found to be less than hybrid (PV/T) active solar still (Rs. 1.93/kg) for 30 years life time of the systems. The payback periods of the passive and hybrid (PV/T) active solar still are estimated to be in the range of 1.1–6.2 years and 3.3–23.9 years, respectively, based on selling price of distilled water in the range of Rs. 10/kg to Rs. 2/kg. The energy payback time (EPBT) has been estimated as 2.9 and 4.7 years, respectively.     

Life cycle assessment of solar PV based electricity generation systems: A review

Sustainable development requires methods and tools to measure and compare the environmental impacts of human activities for various products viz. goods, services, etc. This paper presents a review of life cycle assessment (LCA) of solar PV based electricity generation systems. Mass and energy flow over the complete production process starting from silica extraction to the final panel assembling has been considered. Life cycle assessment of amorphous, mono-crystalline, poly-crystalline and most advanced and consolidate technologies for the solar panel production has been studied.     

Life cycle assessment of hydrogen fuel cell and gasoline vehicles

A life cycle assessment of hydrogen and gasoline vehicles, including fuel production and utilization in vehicles powered by fuel cells and internal combustion engines, is conducted to evaluate and compare their efficiencies and environmental impacts. Fossil fuel and renewable technologies are investigated, and the assessment is divided into various stages.     

Life cycle assessment of an alkaline fuel cell CHP system

A life cycle assessment (LCA) of an alkaline fuel cell based domestic combined heat and power (CHP) system is presented. Literature on non-noble, monopolar cell design and stack construction was reviewed, and used to produce a life cycle inventory for the construction of a 1 kW stack. Inventories for the ancillary components of other commercial fuel cell products were consulted, and combined with information on the fuel processing requirements of alkaline cells to suggest a hypothetical balance of plant that would be required to produce AC electricity and domestic grade heat from natural gas and air.     

Optimum energy evaluation and life cycle cost assessment of a hydrogen liquefaction system assisted by geothermal energy

In this study, analyses of the thermodynamic performance and life cycle cost of a geothermal energy-assisted hydrogen liquefaction system were performed in a computer environment. Geothermal water at a temperature of 200 °C and a flow rate of 100 kg/s was used to produce electricity. The produced electricity was used as a work input to liquefy the hydrogen in the advanced liquefaction cycle. The net work requirement for the liquefaction cycle was calculated as 8.6 kWh/kg LH₂. The geothermal power plant was considered as the work input in the liquefaction cycle. The hydrogen could be liquefied at a mass flow rate of 0.2334 kg/s as the produced electricity was used directly to produce liquid hydrogen in the liquefaction cycle. The unit costs of electricity and liquefied hydrogen were calculated as 0.012 $/kWh and 1.44 $/kg LH₂. As a result of the life cycle cost analysis of the system, the net present value (NPV) and levelized annual cost (LAC) were calculated as 123,100,000 and 14,450,000 $/yr. The simple payback period (N_spp) and discount payback period (N_dpp) of the system were calculated as 2.9 and 3.6 years, respectively.     

Life cycle assessment of olive pomace gasification for an up-draft fixed bed gasifier system

Biomass gasification has been considered as an important renewable energy alternative to deal with the environmental problems originating from fossil fuels and climate change effects. Olive pomace as a by-product of the olive oil production process is a significant biomass source. Although gasification technology is accepted as an environmentally friendly power system, the studies to determine its environmental impact via Life Cycle Assessment (LCA) are very limited. LCA is a key tool to evaluate all environmental impacts from the beginning to the end of the process. The aim of this study is to assess the overall environmental impacts of the olive pomace gasification for electricity generation and evaluation of its solid by-products namely biochar and tar. Four scenarios were compared to estimate the environmental impacts of gasification by-products with a LCA approach, following to the cradle-to-grave approach. The production of olive, olive pomace generation during its processing for olive oil production, gasification of olive pomace, construction of the gasifier, gas cleaning system and syngas composition have been included in the evaluations. It is clear from the analysis results that the scenarios have very low impact values in the case of beneficial usage of biochar in different industries. In terms of ozone layer depletion potential (2.74 × 10 ⁻⁶ kg CFC11 eq) and global warming potential (36.99 GWP100a), the paramount scenario from an environmental viewpoint is the scenario having the biochar and tar usage as a resource in another industry.     

The cost analysis of hydrogen life cycle in China

Currently, the increasing price of oil and the possibility of global energy crisis demand for substitutive energy to replace fossil energy. Many kinds of renewable energy have been considered, such as hydrogen, solar energy, and wind energy. Many countries including China have their own plan to support the research of hydrogen, because of its premier features. But, at present, the cost of hydrogen energy production, storage and transportation process is higher than that of fossil energy and its commercialization progress is slow. Life cycle cost analysis (LCCA) was used in this paper to evaluate the cost of hydrogen energy throughout the life cycle focused on the stratagem selection, to demonstrate the costs of every step and to discuss their relationship. Finally, the minimum cost program is as follows: natural gas steam reforming – high-pressure hydrogen bottles transported by car to hydrogen filling stations – hydrogen internal-combustion engines.