个性营销能否撑起陶瓷企业那片天

前些天在杂志上看到过一个故事,说的是中国人和犹太人的区别,一个犹太人建了一所加油站,生意很好,第二个犹太人来了,就在加油站旁边建了一座购物中心,生意同样很好,第三个犹太人来了,就在旁边又建了一座游乐场,生意照样很好,第四个犹太人来了,就开了一家4S店,生意也是好的不得了,第五个犹太人来了,他建的是公共卫生间,也赚到了钱。可是在我国呢,第一个人建了一个加油站,赚钱了,第二个人看到了,觉得有利可图,也建了一个加油站,结果第三个,第四个,     

高庄煤矿供热系统的改造

高庄煤矿针对原锅炉供热系统存在的问题进行了改造,拆除原锅炉,采用邻矿电厂的富余蒸气作热源,安装热交换器组。改造后保证了供热质量,节约了能源、资源,提高了矿区环境质量,降低了运行维护费用,节省了人力资源,减少了占地面积,节约了各项检查检测费用。     

石墨电极数控机床常见故障分析

近年来,各炭素企业为了扩大再生产和替换陈旧设备,相继加快了石墨电极机床数字化改造步伐,不仅降低了操作者的劳动强度,提高了生产效率,而且减少了人为误差,提高了控制精度,保证了加工质量.     

碱洗塔洗塔系统的优化

介绍了氯乙烯合成工段碱洗塔洗塔工艺流程,并针对存在的问题对其进行了优化升级,使碱洗塔自控洗塔、配碱,提高了系统的自动化控制水平,节约了水资源,也降低了废水处理系统的负荷,最大限度地提高了碱液的利用率,提高了工作效率,增加了经济效益,     

差一点先生

差一点先生,18岁那年,差一点考取大学。虽然平时学习吊儿郎当了点,高考总分差了一大截,不过,分数摊到每门功课上,其实只差了一点。差一点先生因此常常懊丧地对人说,如果俺考取了大学,指不定现在成了享誉世界的化学家,还获得了诺     

2010年度工作会议

<正>2010年1月16日—17日,公司召开了2010年度工作会议。会议认真回顾总结了2009年的主要工作,分析了当前的形势和机遇,部署了2010年的工作任务。会上,公司董事长蒋明作了重要讲话,总经理毛绍融作了行政工作报告,党委副书记陈百河作了党委工作报告,副总     

PUMP-200新型乳液泵组装机的研制与应用

介绍了PUMP-200新型乳液泵组装机的工作原理及特点,通过比较和分析,说明了该新机的运用,节省了大量的人力物力,降低了能耗,大大缩短了产品交货期,实现了产品质量的稳定,提高了生产效率,经济效益显著。     

带式过滤机在多品种氢氧化铝生产中的应用

介绍了带式真空过滤机的工作原理及其在多品种氢氧化铝生产方面的应用情况,并对带式真空过滤机使用过程中存在的问题进行了改造。改造之后,提高了洗涤过滤效率,降低了滤饼水分,降低了能耗,提高了产量,确保了产品质量,取得了较好的经济效益。     

洗衣粉生产中热风炉燃烧系统的改进

针对洗衣粉生产中原燃烧系统存在的缺陷进行了改进,改变了雾化方式,更换了燃烧器,调整了工艺参数。改进后,提高了产品质量,降低了燃料消耗,经济效益显著。     

哈尔乌素选煤厂采用TDS智能干选机的改造及安全生产措施

介绍了TDS智能干选机在哈尔乌素选煤厂的应用现状及现场改造实践,从技术和管理方面提出了安全生产措施,改造后增强了选煤厂系统灵活性和市场适应性,降低了生产费用,稳定了煤质,保证了安全生产,提高了盈利能力,同时确保了生产工人辐射剂量小于一般公众限值,防爆和除尘满足规范和规程要求及煤矿安全生产要求。     

液滴撞击微结构疏水表面的动态特性

对去离子水滴撞击不同几何尺寸显微结构方柱和方孔状疏水表面的动态特性进行了研究。结果表明：当液滴以不同速度撞击微方柱疏水表面时,液滴展现铺展和回缩过程,且随着韦伯数（We数）增大,最大铺展直径增大,并伴随卫星液滴出现,但到达最大铺展直径的时间一致;而当液滴以相同的速度（We数相同）撞击间距不同的微方柱疏水表面时,液滴的最大铺展直径随着间距的增大而减小,且铺展过程会液滴浸润状态变得不稳定,发生由Cassie向Wenzel状态的浸润转变。当微方柱间距较小时,液滴受到的黏附功越小,越易发生向Cassie状态的转变;液滴撞击微方孔疏水表面时,液滴以规则的圆环状向外铺展和回缩,最后呈现近似规则的椭球状,不会发生向Wenzel状态的浸润转变,利用建立的物理模型对前述现象进行了分析。     

废钢在底吹反应器中运动熔化及混匀的水模型实验

通过水模型实验,使用饱和氯化钾溶液制作的冰样模拟重型废钢,研究其在底吹气体搅拌反应器中的运动、融化及溶质的混匀规律。探究了单孔吹气模式下的液面高度、双孔吹气方式下的气体流量等因素对其的影响。结果表明,单孔吹气时,液面高度较低时(液面高度与直径比为0.42),气柱发展不充分,容器内环流较弱,盐球在气柱上下往复运动,融化较为缓慢。随着液面高度增加(液面高度与直径比为1.04),盐球随着环流运动,融化过程加快,按照98%标准得到的KCl的混匀时间甚至低于融化时间。双孔吹气时,A孔气体流量0.8 m3/h不变,B孔气体流量为0.5和1.0 m3/h时,盐球从吹气孔A上方加入后,在容器底部停留一段时间,在60~70 s之后才运动到顶部,沿着环流运动;B孔流量增加至1.5 m3/h时,盐球不会在底部停留,随气柱运动到吹气流量大的一侧的羽流区,其融化过程较快。在双孔吹气方案中,也发现了KCl的混匀时间低于融化时间的规律,这和融化末期盐球质量较小,释放的盐分较少有关。在本研究中,双孔吹气对盐球融化的促进作用不如单孔吹气且流量较大的方案。     

Effect of the sol fraction and hydrostatic deformation on the viscoelastic behavior of prestrained highly filled elastomers

This study focuses on the relations between the microstructure and the viscoelastic behavior of an industrial solid propellant belonging to the class of highly filled elastomers. Precisely, the study aims at determining the impact on the viscoelastic behavior of the presence of the sol fraction inside the polymer network. The sol fraction is the part of the binder that a good solvent can extract. The solid propellant is swollen to various extents by solutions of plasticizer and polymer molecules. This swelling leads to a hydrostatic deformation of the polymer network, corresponding to an extension or contraction loading for each specimen. Prestrained dynamic mechanical analysis tests, superimposing a small oscillating strain on a prestrain, characterize the viscoelastic behavior. The degree of swelling of the network and the effective filler fraction drive the viscoelastic response. In addition, the mechanical behavior does not depend on the chemical nature of the introduced sol fraction. Moreover, a nonlinear behavior, i.e., an increase in both storage and loss moduli with increasing prestrain, is initiated at low prestrain. This nonlinearity depends on the contraction or extension of the network and could result from particles aligning with prestrain, which is expected in such highly filled materials. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Lipid soil removal from cotton fabric after mercerization and carboxymethylation finishing

Soiling and soil removal from cotton fabrics that had been chemically modified by mercerization and carboxymethylation were studied using electron microscopy and radiotracer techniques. The distribution of lard soil in specimens before and after laudering was determined by means of chemical tagging with osmium tetroxide. Both the chemical and physical changes of the cotton resulted in differences in soiling and soil removal of lipid soil. Mercerization and carboxymethylation of cotton swell the cotton fiber, decrease the crenulation and the lumen, and smooth the fiber surface. These finishes also increase the pore volume and thus the chemical accessibility of the fibrillar structure. In addition, carboxymethylation causes changes in the chemistry of the fiber by increasing the carboxyl group content. These structural changes reduce the amount of soil deposited in the lumen of the fiber, particularly for the carboxymethylated cotton. They also increase soil removal from the crenulation and the interfiber spaces in the yarn bundle. Soil removal from fiber surfaces and from within the fiber—both lumen and secondary wall—was highest for the carboxymethylated cotton, and mercerization also enhanced lipid soil removal. The results of this experiment indicate that chemical accessibility and hydrophilicity of the fiber structure influence both soil deposition and soil removal of lipid soils. Soil removal of these modified cottons is enhanced by multiple mechanisms: (i) the decrease in small crevices and the crenulation or small capillary along the fiber, (ii) the increase in pore volume that enhances chemical accessibility and thus detergency within the fiber structure, (iii) the increase in hydrophilicity that enhances soil removal from the surface by the roll-up mechanism, (iv) the increase of mechanical action due to enhanced swelling of the carboxymethylated cotton, and (v) the reduction of soil redeposition on carboxymethylated surfaces.     

Inorganic/organic nanocomposite coatings: The next step in coating performance

Inorganic/organic hybrid materials have considerable promise and are beginning to become a major area of research for many coating usages, including abrasion and corrosion resistance. Our primary approach is to prepare the inorganic phase in situ within the film formation process of the organic phase. The inorganic phase is introduced via sol-gel chemistry into a thermosetting organic phase. By this method, the size, periodicity, spatial positioning, and density of the inorganic phase can be controlled. An important aspect of the inorganic/organic hybrid materials is the coupling agent. The initial task of the coupling agent is to provide uniform mixing of the oligomeric organic phase with the sol-gel precursors, which are otherwise immiscible. UV-curable inorganic/organic hybrid systems have the advantages of a rapid cure and the ability to be used on heat sensitive substrates such as molded plastics. Also, it is possible to have better control of the growth of the inorganic phase using UV curing. It is our ultimate goal to completely separate the curing of inorganic and organic phases to gain complete control over the morphology, and hence optimization of “all” the coating properties. Thus far, it has been found that concomitant UV curing of the inorganic and organic phases using titanium sol-gel precursors afforded nanocomposite coatings which completely block the substrate from UV light while maintaining a transparent to visible light. Also, it has been found that the morphology of the inorganic phase is highly dependent on the concentration and reactivity of the coupling agent. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004, in Chicago, IL.     

聚电解质静电沉积改性制备高性能反渗透膜

利用次氯酸钠溶液对商品反渗透膜表面进行氯化处理,然后将聚阳离子电解质壳聚糖通过静电吸附作用沉积在RO膜的表面,系统地研究了氯化过程的pH、氯化时间、次氯酸钠浓度、壳聚糖浓度及其沉积时间对膜性能的影响,以制备出高通量、高截留率的RO膜。在压力1.55 MPa、原料液温度（298±1）K的条件下,测定RO膜处理2000 μg·g^-1氯化钠溶液的水通量和截留率。结果表明,当pH=9、氯化时间为30 min、次氯酸钠浓度为1000 mg·L^-1时,水通量较原膜提高了约19.89%,截留率略有提高;当壳聚糖浓度为0.1%（质量分数）、沉积时间为30 min时,改性膜的接触角降低到34.88°,亲水性提高,水通量较氯化后的RO膜几乎保持不变,为60.55 L·m^-2·h^-1,截留率达到了99.56%。经过氯化和沉积改性后的RO膜水通量和截留率均得到了提高。     

Calculation of Residual Thermal Stresses in Injection Molded Amorphous Polymers by the Finite Element Method

Abstract

The finite element method (FEM) is used to calculate the distribution of residual internal stresses in an injection molded plate-shaped polystyrene specimen. The first step of the calculating procedure is the determination of the temperature distributions in the plate and its variation with cooling time. The temperature distribution data are then used for the determination of the corresponding stress distribution. Also this latter step is accomplished using the FEM-technique. The residual stress distribution is obtained when the sample has been cooled to the temperature of the mold. The main result of the calculations is the finding that the surface layer of the plate is subject to compressive stresses, while the interior accommodates stresses of tensile type. The calculations relate to a polystyrene specimen. The results are shown to agree well with earlier data concerning internal stresses in injection molded objects. The possible influence of anisotropy and visco-elastic relaxation has been neglected. The method can be applied to other amorphous polymers and, after a slight modification, also to polymers of semicrystalline type.     

Écoulement de Taylor‐Couette en géométrie finie et à surface libre

The reactors of Taylor‐Couette type are relatively recent application in the engineering processes field. The stability and the flow structure in this device are examined under the effect combined of the free surface and the fluid's height in annular space. The exploitation of the flow regimes is carried out according to the number of Taylor for various values of aspect ration Γ. By means of ultrasonic velocimetry (UPV) we determine axial average velocity profile and the axial wavelength. We also carry out the spectral analysis by Fourier's fast transform of the fluctuations associated with the average velocity values in order to analyze the flow structure. We particularly aim for checking the presence or the absence of the azimuth wave according to the filling height and the rotational velocity imposed. We highlight the effects of free surface and aspect ratio on the conditions of appearance of the second instability ( wavy mode). The analysis of the fluctuation shows that the appearance of the azimuth wave regime (Wavy mode) is delayed when the aspect ration decreases. Below a critical value noted Γc = 10, the azimuth wave regime is not observed any more.     

Pd-Pb/SiO2催化高浓度乙烯基乙炔加氢合成丁二烯

研究了硅胶负载钯铅双金属催化剂催化高浓度乙烯基乙炔加氢合成丁二烯过程。结果表明,加入适量的铅可起到分隔钯纳米粒子,阻碍钯纳米粒子团聚的作用,从而提高催化剂的催化活性,最佳Pb/Pd摩尔比为0.2。继续提高Pb/Pd摩尔比时,会生成铅钯合金相,造成催化剂活性降低。X射线光电子能谱结果表明,催化剂的催化活性与Pd 3d的电子结合能呈正相关关系。制备催化剂过程中,还原温度对催化剂的结构和催化性能影响显著。在350℃下还原得到的催化剂中金属氧化物还原不彻底,催化剂活性较低;还原温度为450℃时,则会引起钯纳米粒子烧结,造成催化剂的催化活性和对丁二烯的选择性同时降低;催化剂的最佳还原温度为400℃。在40℃催化乙烯基乙炔反应40 h后,积炭造成催化剂的孔道堵塞,催化剂失活。因此,需要进一步开展改善催化剂的抗积炭能力和使用寿命方面的研究。     

Selective Sequestration of Pyrrolizidine Alkaloids from Diverse Host Plants by Longitarsus Flea Beetles

In 11 species of the flea beetle genus Longitarsus we investigated whether the insects sequester the pyrrolizidine alkaloids (PAs) present in their host plants of the families Asteraceae and Boraginaceae. In all cases where PAs could be detected in the leaves of the local host plant, they could also be detected in the corresponding beetles. In one host plant, Pulmonaria officinalis, no PAs could be detected in the leaves, yet were present in the beetles collected from them. We suggest this is due to uptake of PAs during the root-feeding larval stage. By comparing the GC-MS pattern of PAs found in the beetles with those of their hosts, we investigated the specificity of this sequestration. Furthermore, we compared the pattern of sequestered PAs across beetle species that had been feeding on the same plant, and across hosts in Longitarsus species that feed on different plants in the field. This allowed us to analyze to what extent the PA pattern in the insects is specific for the beetle species and depends on the local food plant. Our data indicate that the PAs found in the beetles are largely determined by the host plant, e.g., whether alkaloids typical of the Boraginaceae or Asteraceae are present. However, there are some indications for a selective uptake of PAs and apparently the beetles are able to metabolize them.