Controlled Drug Delivery Systems Based on Thiolated Chitosan Microspheres

The aim of the present study was to verify the potential of chitosan-thio-butyl-amidine (TBA) microspheres as carrier systems for controlled drug delivery. In this study microspheres were prepared utilizing water in oil (w/o) emulsification solvent evaporation technique. A concentration of 0.5% of chitosan-TBA conjugate displaying 100 µM thiol groups per gram polymer was used in the aqueous phase of the emulsion in order to prepare microspheres. The obtained non-aggregated free-flowing microspheres were examined with conventional light microscope as well as scanning electron microscopy (SEM). The microscopic images indicated that the prepared chitosan-TBA microspheres were of spherical shape and smooth surface while microparticles obtained from the unmodified chitosan were of porous structure and non-spherical shape. Particle size distribution was determined to be in the range from 1 to 59 µm. The free thiol group content of chitosan-TBA microspheres prepared with an aqueous phase of pH 2, 5, and 6.5 were determined to be 71.4, 49.4, and 8.2 µM/g polymer, respectively. Furthermore, results attained from in vitro release studies with fluorescein isothiocyanate labelled dextran (FITC-dextran) loaded chitosan-TBA microspheres showed a controlled release rate for more than three hours while the control reached the maximum peak level of release already within an hour. According to these results, chitosan-TBA microspheres seem to be a promising tool in transmucosal drug delivery for poorly absorbed therapeutic agents.     

Development and in vitro evaluation of surface modified poly(lactide-co-glycolide) nanoparticles with chitosan-4-thiobutylamidine

The objective of this study was to develop a nanoparticulate drug delivery system based on the surface modification of poly(lactide-co-glycolide) (PLGA) nanoparticles with a thiolated chitosan. PLGA nanoparticles were prepared by the emulsification-solvent evaporation method. Immobilization of chitosan to the surface of PLGA nanoparticles via amide bonds was mediated by a carbodiimide. Thiol groups were covalently bound to the chitosan surface of particles by reaction with 2-iminothiolane. Obtained nanoparticles were characterized in vitro regarding size, zeta potential, thiol group content, stability at different pH values, mucoadhesion, and drug release. Results demonstrated that the surface modification of PLGA nanoparticles with thiolated chitosan (chitosan-TBA) leads to nanoparticles of a mean diameter of 889.5 ± 72 nm and positive zeta potential of + 24.74 mV. The modified nanoparticles contained 7.32 ± 0.24 μmol thiol groups per gram nanoparticles. The size of nanoparticles was strongly influenced by the pH of the surrounding medium, being 925.0 ± 76.3 nm at pH 2 and 577.8 ± 66.7 nm at pH 7.4. Thiolated nanoparticles showed a 3.3-fold prolonged residence time on the mucosa and an unchanged release profile in comparison to unmodified PLGA nanoparticles. These data suggest that surface modified chitosan-TBA conjugate PLGA nanoparticles have the potential to be used as mucoadhesive drug delivery system.     

Cellulose acetate microspheres as floating depot systems to increase gastric retention of antidiabetic drug: formulation, characterization and in vitro-in vivo evaluation

Gastric emptying is a complex process that is highly variable and makes the in vivo performance of drug delivery systems uncertain. In order to avoid this variability, efforts have been made to increase the retention time of the drug delivery systems for more than 12 hours utilizing floating or hydrodynamically controlled drug delivery systems. The objective of this investigation was to develop a floating, depot-forming drug delivery system for an antidiabetic drug based on microparticulate technology to maintain constant plasma drug concentrations over a prolonged period of time for effective control of blood sugar levels. Formulations were optimized using cellulose acetate as the polymer and evaluated in vitro for physicochemical characteristics and drug release in phosphate buffered saline (pH 7.4), and evaluated in vivo in healthy male albino mice. The shape and the surface morphology of the prepared microspheres were characterized by optical microscopy and scanning electron microscopy. In vitro drug release studies were performed and drug release kinetics were calculated using the linear regression method. Effects of stirring rate during preparation and polymer concentration on the size of microspheres and drug release were observed. The prepared microspheres exhibited prolonged drug release (more than 10 hours) and remained buoyant for over 10 hours. Spherical and smooth-surfaced microspheres with encapsulation efficiency ranging from 73% to 98% were obtained. The release rate decreased and the mean particle size increased at higher polymer concentrations. Stirring speed affected the morphology of the microspheres. This investigation revealed that upon administration, the biocompatible depot-forming polymeric microspheres controlled the drug release and plasma sugar levels more efficiently than plain orally given drug. These formulations, with their reduced frequency of administration and better control over drug disposition, may provide an economic benefit to the user compared with products currently available for diabetes control.     

pH dependent hydrolysis and drug release behavior of chitosan/poly(ethylene glycol) polymer network microspheres

Semi-interpenetrating polymer network (IPN) microspheres of chitosan and poly(ethylene glycol) PEG were prepared for controlled release of drugs. A new method for the chemical crosslinking of chitosan microspheres containing isoniazid (INH) as a model drug is proposed and evaluated. The method consists of the exposure of microspheres to the vapor of crosslinking agent that act in gaseous phase under mild conditions. The structural analysis of the microspheres was carried out by FTIR-analysis. The swelling behavior, hydrolytic degradation, structural changes of the microspheres and loading capacity (LC) of the microspheres for INH were investigated. The prepared microspheres have shown 93% drug loading capacity, which suggested that these semi-IPN microspheres are suitable for controlled release of drugs in an oral sustained delivery system. © 2001 Kluwer Academic Publishers     

Chitosan-Drug Conjugate Microspheres: Preparation and Drug Release Properties of Microspheres Composed of the Conjugate of 2'- or 3'-(4-Carboxy-butyryl)-5- Fluorouridine with Chitosan

The conjugate microspheres (Chi-glu-FUR-m) were prepared by the dry-in-oil method using chitosan-5-fuorouridine conjugate. Chi-glu-FUR-m were characterized by drug content, particle shape and size, swelling property, and drug release. Their characteristics were compared with those of the simple microspheres (Chi/ FUR-m), which were prepared under similar conditions using a mixture of chitosan and 5-fluorouridine. Both microspheres prepared showed a high retention of the drug after preparation and similar particle size and shape. Swelling ratios after incubation in aqueous buflers of pH 7.4 for 6 hr were similar for both microspheres. Chi-glu-FUR-m swelled quickly in aqueous buffers of pH 7.4 and the disintegration was observed to occur gradually from 24 hr afrer the incubation. Chi-glu-FUR-m showed a gradual drug release (50% release time = 61 hr), while Chi/FUR-m released the drug very rapidly, Such characteristics of Chi-glu-FURm as swelling, slow disintegration, and gradual drug release propose its usefulness for localization or chemoembolization therapy.     

A novel method for the preparation of biodegradable microspheres for protein drug delivery.

Microspheres are potential candidates for the protein drug delivery. In this work, we prepared polymer-coated starch/bovine serum albumin (BSA) microspheres using co-axial electrohydrodynamic atomization (CEHDA). First, starch solution in dimethyl sulphoxide (DMSO) was prepared and then an aqueous solution of BSA was added to it to make a starch-BSA solution. Subsequently, this solution was made to flow through the inner capillary, while the polymer, polydimethylsiloxane (PDMS), flowed through the outer capillary. On collection, filtration and subsequent drying, near-monodisperse microspheres of 5-6microm in size were obtained. The microspheres were characterized by Fourier-transform infrared (FT-IR) spectroscopy and scanning electron microscopy. Cumulative BSA release was investigated by UV spectroscopy. BSA structure and activity was preserved in the microspheres and its release in 0.01M phosphate buffered saline (PBS) was studied over a period of 8 days. There was an initial burst with 32wt% of total BSA released in 2h. Overall 75wt% of BSA was released over a 7 day period.     

Aqueous preparation and evaluation of albumin-chitosan microspheres containing indomethacin

Controlled-release egg albumin-chitosan microspheres containing indomethacin as a model drug were successfully prepared by coacervation method. The proposed method can offer a simple method for microsphere preparation in an aqueous system with the elimination of the use of organic solvents that are usually needed in conventional techniques of microencapsulation. The interaction between negatively charged egg albumin molecules in phosphate buffer, pH 7.2, or sodium hydroxide solution and positively charged chitosan molecules dissolved in diluted acetic acid to form an insoluble precipitate was the principle for the formation of the microspheres. The effects of many process variables, such as amount of formaldehyde as a cross-linking agent, stirring time, final pH of encapsulation medium, initial drug loading, and albumin concentration or albumin-to-chitosan weight ratio, on the properties of the prepared microspheres were investigated. Incorporation efficiencies of the microspheres to the drug were high in most cases and ranged between 63.3 ± 3.6% and 92.39 ± 3.2%, while particle sizes were 435.2 ± 12.6 up to 693.9 ± 34.6 µm for the different tested batches. On the other hand, the values of angles of repose and compressibility indices were in the range of 23.5 ± 0.4 to 32.0 ± 0.7 degrees and 11.1 ± 0.7% to 23.6 ± 0.7% respectively, which indicate overall good free flowing nature of the microspheres of all batches. The maximum required amount of the cross-linking agent was determined to avoid excessive unnecessary chemicals. It was also noticed that excessive time of stirring and excessive initial drug loading are not recommended as it may lead to microspheres of low properties. The pH of the encapsulation media (pH 3.77 up to pH 4.91) significantly affected the properties of the microspheres. As the pH of the encapsulation media was increased, the incorporation efficiency, particle size, and flowability decreased, along with increase of drug release rate, which could be related to incomplete cross linking of the microspheres matrix. It was also observed that high concentration of albumin solution and accordingly the increase of albumin-to-chitosan weight ratio were accompanied with increases in incorporation efficiency and particle size with improved microsphere flowability and slow indomethacin release. Thus, the proposed microspheres showed the ability to control the release of indomethacin, and their properties were highly affected by many process variables that could be controlled to obtain an optimized system.     

Development and In Vitro Evaluation of Surface Modified Poly(lactide-co-glycolide) Nanoparticles with Chitosan-4-Thiobutylamidine

ABSTRACT

The objective of this study was to develop a nanoparticulate drug delivery system based on the surface modification of poly(lactide-co-glycolide) (PLGA) nanoparticles with a thiolated chitosan. PLGA nanoparticles were prepared by the emulsification-solvent evaporation method. Immobilization of chitosan to the surface of PLGA nanoparticles via amide bonds was mediated by a carbodiimide. Thiol groups were covalently bound to the chitosan surface of particles by reaction with 2-iminothiolane. Obtained nanoparticles were characterized in vitro regarding size, zeta potential, thiol group content, stability at different pH values, mucoadhesion, and drug release. Results demonstrated that the surface modification of PLGA nanoparticles with thiolated chitosan (chitosan-TBA) leads to nanoparticles of a mean diameter of 889.5 ± 72 nm and positive zeta potential of + 24.74 mV. The modified nanoparticles contained 7.32 ± 0.24 μmol thiol groups per gram nanoparticles. The size of nanoparticles was strongly influenced by the pH of the surrounding medium, being 925.0 ± 76.3 nm at pH 2 and 577.8 ± 66.7 nm at pH 7.4. Thiolated nanoparticles showed a 3.3-fold prolonged residence time on the mucosa and an unchanged release profile in comparison to unmodified PLGA nanoparticles. These data suggest that surface modified chitosan-TBA conjugate PLGA nanoparticles have the potential to be used as mucoadhesive drug delivery system.     

Multiparticulate Drug Delivery System for the Treatment of Diabetes Mellitus: In Vitro and In Vivo Evaluation

Biodegradable microspheres of poly(?)caprolactone were prepared by solvent evaporation method for controlled release of repaglinide. The prepared microspheres were spherical in shape having smooth surface. The average diameter was in the range of 24 to 31.04 µm. Drug entrapment efficiency of the prepared microspheres was in the range of 68.81% to 79.30%. Differential scanning calorimetry and x-ray diffraction analyses indicated the amorphous dispersion of drug in the microspheres. The drug release was continued up to 24 h depending upon the formulation variables; drug release was slow from the microspheres which were prepared with higher concentration of polymer and as the initial drug loading was increased, the drug release was also increased. A non-Fickian transport was the mechanism of drug release for all the microspheres. The in vivo anti-diabetic activity performed on steptozotocin induced rats indicated that the plain repaglinide has shown maximum percentage of reduction in blood glucose at the end of 3 h and then the percentage of reduction in blood glucose was decreased. While in case of rats treated with PCL5 microspheres, the percentage of reduction in glucose level was slow as compared to plain repaglinide within 3 h, but it was gradually increased to 74.86% at the end of 24 h.     

Release profiles of theophylline from microspheres consisting of dextran derivatives and cellulose acetate butyrate: effect of polyion complex formation

The objective of this study was to evaluate the utility of mixtures among oppositely charged dextran derivatives as constituents of a controlled release microsphere. Carboxymethyldextran (CMD) and dextran sulfate (DS) were used as polyanions, and [2-(diethylamino) ethyl] dextran (EA) and [2-hydroxypropyltrimethylammonium] dextran (CDC) as polycations. The microspheres consisting of hydrophilic and hydrophobic polymers were prepared by emulsion-solvent evaporation method. The mixtures, CMD/EA, CMD/CDC, DS/EA, and DS/CDC, were used as hydrophilic polymers, because they can interact with each other to form polyion complexes for the improvement of sustained-release performances. Cellulose acetate butyrate and theophylline were used as a model hydrophobic polymer and a model drug, respectively. The yield of microspheres was excellent (more than 95%). According to observation, by scanning election microscopy (SEM) microspheres were spherical with a rough surface. The in vitro drug release from microspheres was examined in the JP XIV first fluid, pH 1.2, and second fluid, pH 6.8, at 37°C, and 100 rpm. In the DS/CDC system, drug release was depressed by formation of a polyion complex and not affected by pH of dissolution medium. The release rate was modulated by the ratio of hydrophilic and hydrophobic matrix. This particulate system, in which the polyion complex matrix is strengthened by a hydrophobic polymer, is a promising formulation for drug delivery.     

Emulsion Spray-Drying for the Preparation of Albumin-Loaded PLGA Microspheres

The purpose of this work was to study the encapsulation of bovine serum albumin (BSA) in polylactide-co-glycolide (PLGA) microspheres using an emulsion/spray-drying method. Albumin was dissolved in an aqueous phase (w) in the presence of surfactant and emulsified in an organic phase containing the polymer (o). To stabilize the emulsion, different types of surfactant (Pluronic® F68, Pluronic F127, sodium oleate, dioctylsulfosuccinate) were added to the aqueous phase. The w/o emulsion was spray-dried to obtain BSA-loaded PLGA microspheres. The effect of type of surfactant on microsphere characteristics was evaluated. The microspheres were characterized for their morphology by scanning electron microscopy (SEM) and granulometric analysis; drug content determination and in vitro dissolution tests were performed. Results showed that the emulsion/spray-drying method is suitable for obtaining small microparticles (2-5 μm) characterized by high drug payloads (70%-80% encapsulation efficiency). The type of surfactant affects the microsphere shape and BSA release behavior.     

Enteric-coated epichlorohydrin crosslinked dextran microspheres for site-specific delivery to colon

Abstract

Enteric-coated epichlorohydrin crosslinked dextran microspheres containing 5-Fluorouracil (5-FU) for colon drug delivery was prepared by emulsification-crosslinking method. The formulation variables studied includes different molecular weights of dextran, volume of crosslinking agent, stirring speed, time and temperature. Dextran microspheres showed mean entrapment efficiencies ranging between 77 and 87% and mean particle size ranging between 10 and 25?µm. About 90% of drug was released from uncoated dextran microspheres within 8?h, suggesting the fast release and indicated the drug loaded in uncoated microspheres, released before they reached colon. Enteric coating (Eudragit-S-100 and Eudragit-L-100) of dextran microspheres was performed by oil-in-oil solvent evaporation method. The release study of 5-FU from coated dextran microspheres was complete retardation in simulated gastric fluid (pH 1.2) and once the coating layer of enteric polymer was dissolved at higher pH (7.4 and 6.8), a controlled release of the drug from the microspheres was observed. Further, the release of drug was found to be higher in the presence of dextranase and rat caecal contents, indicating the susceptibility of dextran microspheres to colonic enzymes. Organ distribution and pharmacokinetic study in albino rats was performed to establish the targeting potential of optimized formulation in the colon.     

Engineering of poly(ε-caprolactone) microcarriers to modulate protein encapsulation capability and release kinetic

Drug delivery applications using biodegradable polymeric microspheres are becoming an important means of delivering therapeutic agents. The aim of this work was to modulate the microporosity of poly(ε-caprolactone) (PCL) microcarriers to control protein loading capability and release profile. PCL microparticles loaded with BSA (bovine serum albumin) have been de novo synthesized with double emulsion solvent evaporation technique transferred and adapted for different polymer concentrations (1.7 and 3% w/v) and stabilizer present in the inner aqueous phase (0.05, 0.5 and 1% w/v). SEM (scanning electron microscope) and CLSM (confocal laser scanning microscope) analysis map the drug distribution in homogeneously distributed cavities inside the microspheres with dimensions that can be modulated by varying double emulsion process parameters. The inner structure of BSA-loaded microspheres is greatly affected by the surfactant concentration in the internal aqueous phase, while a slight influence of polymer concentration in the oil phase was observed. The surfactant concentration mainly determines microspheres morphology, as well as drug release kinetics, as confirmed by our in-vitro BSA release study. Moreover, the entrapped protein remained unaltered during the protein encapsulation process, retaining its bio-activity and structure, as shown through a dedicated gel chromatographic analytical method.     

Characterisation of Biodegradable Microspheres Containing Dehydro-Iso-Androsterone

Poly-DL-lactide (PLA) and poly-DL-lactide-co-glycolide (DL-PGA) micromatrices (PharmazomesTM) containing dehydro-isoandrosterone (DHEA), a weak androgen, were prepared by a solvent evaporation process. Micromatrices with increasing drug loading as well as increasing polymer molecular weight were prepared. The morphology of these systems depended on the drug loading, the polymer molecular weight and polymer composition. Increasing the drug loading or polymer molecular weight resulted in increasingly irregular microparticles being formed. DSC thermograms did not reveal the presence of crystalline DHEA in micromatrices containing 10 to 50% DHEA loading. However crystalline DHEA was observed in microspheres heated to above the glass transition temperature of the polymer. Xray analysis of 30% DHEA micromatrices established the presence of crystalline DHEA in the micromatrices. The percent release of DHEA from the micromatrices, into 40% ethanol at 37°C, increased with increasing DHEA loading. The dissolution of DHEA from drug-polymer compressed discs of constant surface area was proportional to the square root of time indicating matrix controlled release.     

Ondansetron-loaded chitosan microspheres for nasal antiemetic drug delivery: an alternative approach to oral and parenteral routes

Background: The aim of this study was to develop chitosan microspheres for nasal delivery of ondansetron hydrochloride (OND). Method: Microspheres were prepared with spray-drying method using glutaraldehyde as the crosslinking agent. Microspheres were characterized in terms of morphology, particle size, zeta potential, production yield, drug content, encapsulation efficiency, and in vitro drug release. Results: All microspheres were spherical in shape with smooth surface and positively charged. Microspheres had also high encapsulation efficiency and the suitable particle size for nasal administration. In vitro studies indicated that all crosslinked microspheres had a significant burst effect, and sustained drug release pattern was observed until 24 hours following burst drug release. Nasal absorption of OND from crosslinked chitosan microspheres was evaluated in rats, and pharmacokinetic parameters of OND calculated from nasal microsphere administration were compared with those of both nasal and parenteral administration of aqueous solutions of OND. In vivo data also supported that OND-loaded microspheres were also able to attain a sustained plasma profile and significantly larger area under the curve values with respect to nasal aqueous solution of OND. Conclusion: Based on in vitro and in vivo data, it could be concluded that crosslinked chitosan microspheres are considered as a nasal delivery system of OND.     

Preparation and in vitro evaluation of chitosan microspheres containing prednisolone: comparison of simple and conjugate microspheres

The purpose of the present study was to obtain a novel microparticulate formulation of prednisolone, which was adequate for the treatment of inflammatory bowel disease (IBD). The formulations prepared were evaluated in vitro. Two types of chitosan microspheres containing prednisolone, named Ch-Pred and Ch-SP-MS, were prepared by an emulsification-solvent evaporation method using a chitosan-prednisolone mixture and a chitosan-succinyl-prednisolone conjugate (Ch-SP), respectively. Ch-Pred and Ch-SP-MS were obtained in almost spherical shape. Ch-Pred showed a relatively high drug content of 13.2% (w/w), but the particle size was distributed from 10 to 45 µm, and a large initial burst release of approximately 60% was observed. On the other hand, although Ch-SP-MS exhibited a fairly low drug content of 3.5% (w/w), their particle size ranged from several hundred nanometers to 20 µm, with the mean diameter of 5 µm, and a gradual drug release profile was achieved. These characteristics on particle size and in vitro release suggested that Ch-SP-MS should have good potential as a microparticulate system for the treatment of IBD.     

Physico-chemical properties investigation of cisplatin loaded polybutyladipate (PBA) nanoparticles prepared by w/o/w

cis-Diamminedichloroplatinum(II) (cisplatin) is used against different kinds of cancers. Unfortunately, because of the severe side-effects like nephrotoxicity, ototoxicity, etc., they are administered in small doses at low concentrations. The purpose of this work is to improve injectional controlled release (ICR) of cisplatin that releases drug in the extended temporal periods. In order to access this aim, biodegradable polymeric nanoparticles containing cisplatin as anticancer drug of various ranges from 71 to 661 nm were prepared by a w/o/w double emulsion solvent evaporation technique. Influences of process parameters such as solvent removal technique, type and concentration of polymer, volume of oil phase, volume of external aqueous phase, concentration of stabilizer, drug concentration in the internal and external aqueous phases and power of sonication on morphology, characteristics of the nanoparticles and release profile were investigated. Morphology of the nanoparticles was studied by transmission electron microscopy (TEM) and scanning electron microscopy (SEM) and the images indicated that spherical shape of the nanoparticles can be tailored to rod-like shape by changing the reaction parameters. Size of the nanoparticles decreased as polymer concentration decreases. Volume of oil phase, power of sonication and drug concentration in the internal water phase affected the size of nanoparticles. Drug release profiles indicate that polymer concentration in the oil phase and stabilizer concentration in the external water phase have critical role in the drug release process from the nanoparticles. The in-vitro release of the encapsulated drug was observed by using the diffusion models of release from a sphere carrier and the release pattern was shown to be a complex process.     

In Vivo Characteristics of Injectable Poly(DL-Lactic Acid) Microspheres for Long-Acting Drug Delivery

Abstract

Poly(DL-lactic acid) (PLA) microspheres containing testosterone (T) were prepared by the solvent evaporation process to evaluate their physical properties such as size distribution, shape, drug content, in vivo controlled drug release, pharmacological influences on the prostate gland in castrated rats, and histopathological findings of tissues surrounding the implants. The in vivo release of T from PLA microspheres containing 30 mg of drug obtained with chloroform was continued over a 6-week period. This effect is attributed to high dispersibility ofT in the device when obtained with chloroform. Both serum drug levels and prostate gland weight recovery suggested the effects of a long-acting drug delivery system. The histopathological findings showed that the devices used were completely degraded 10 weeks after injection.     

Development of novel interpenetrating network gellan gum-poly(vinyl alcohol) hydrogel microspheres for the controlled release of carvedilol

Novel interpenetrating polymeric network microspheres of gellan gum and poly(vinyl alcohol) were prepared by the emulsion cross-linking method. Carvedilol, an antihypertensive drug, was successfully loaded into these microspheres prepared by changing the experimental variables such as ratio of gellan gum:poly(vinyl alcohol) and extent of cross-linking in order to optimize the process variables on drug encapsulation efficiency, release rates, size, and morphology of the microspheres. Formation of interpenetrating network and the chemical stability of carvedilol after preparing the microspheres was confirmed by Fourier transform infrared spectroscopy. Differential scanning calorimetry and x-ray diffraction studies were made on the drug-loaded microspheres to investigate the crystalline nature of the drug after encapsulation. Results indicated a crystalline dispersion of carvedilol in the polymer matrix. Scanning electron microscopy confirmed the spherical nature and smooth surface morphology of the microspheres produced. Mean particle size of the microspheres as measured by laser light scattering technique ranged between 230 and 346 µm. Carvedilol was successfully encapsulated up to 87% in the polymeric matrices. In vitro release studies were performed in the simulated gastric fluid or simulated intestinal fluid. The release of carvedilol was continued up to 12 h. Dynamic swelling studies were performed in the simulated gastric fluid or simulated intestinal fluid, and diffusion coefficients were calculated by considering the spherical geometry of the matrices. The release data were fitted to an empirical relation to estimate the transport parameters. The mechanical properties of interpenetrating polymeric networks prepared were investigated. Network parameters such as molar mass between cross-links and cross-linking density for interpenetrating polymeric networks were calculated.     

5-Fluorouracil encapsulated HA/PLGA composite microspheres for cancer therapy

5-Fluorouracil (5FU) was successfully entrapped within poly(lactide-co-glycolide) (PLGA) and hydroyapatite (HA) composite microspheres using the emulsification/solvent extraction technique. The effects of HA to PLGA ratio, solvent ratio as well as polymer inherent viscosity (IV) on encapsulation efficiency were investigated. The degradation and drug release rates of the microspheres were studied for 5?weeks in vitro in phosphate buffered solution of pH 7.4 at 37?°C. The drug release profile followed a biphasic pattern with a small initial burst followed by a zero-order release for up to 35?days. The initial burst release decreased with increasing HA content. The potential of HA in limiting the initial burst release makes the incorporation of HA into PLGA microspheres advantageous since it reduces the risk of drug overdose from high initial bursts. The linear sustained drug release profile over the course of 5?weeks makes these 5-FU-loaded HA/PLGA composite microparticles a promising delivery system for the controlled release of chemotherapy drugs in the treatment of cancer.