An Ab Initio Theoretical Study of 2,4,6‐Trinitro‐1,3,5‐Triazine, 3,6‐Dinitro‐1,2,4,5‐Tetrazine,and 2,5,8‐Trinitro‐Tri‐s‐Triazine

In order to evaluate 2,4,6‐trinitro‐1,3,5‐triazine (TNTAz), 3,6‐dinitro‐1,2,4,5‐tetrazine (DNTAz), and 2,5,8‐trinitro‐tri‐s‐triazine (TNTsTAz), the geometries of these compounds have been fully optimized employing the B3LYP density functional method and the AUG‐cc‐pVDZ basis set. The accurate gas phase enthalpies of formation have been obtained by using the atomization procedure and designing isodesmic reactions in which the parent rings are not destroyed. Based on B3LYP/AUG‐cc‐pVDZ calculated geometries and natural charges, the crystal structures have been predicted using the Karfunkel–Gdanitz method. Computed results show that there exists extended conjugation over the parent rings of these compounds. More energy content is reserved in DNTAz than in both TNTAz and TNTsTAz. The title compounds are much more sensitive than 1,3,5‐trinitrobenzene. The calculated detonation velocity of DNTAz reaches 9.73–9.88 km s⁻¹, being larger than those of CL‐20 and TNTAz. TNTsTAz has no advantage over the widely used energetic compounds such as RDX and HMX.     

Synthesis of novel phosphorous‐containing biphenol, 2‐(5, 5‐dimethyl‐4‐phenyl‐2‐oxy‐1,3,2‐dioxaphosphorin‐6‐yl)‐1,4‐benzenediol and its application as flame‐retardant in epoxy resin

A novel phosphorous‐containing biphenol, 2‐(5,5‐dimethyl‐4‐phenyl‐2‐oxy‐1,3,2‐dioxaphosphorin‐6‐yl)‐ 1,4‐benzenediol (DPODB), was prepared by the addition reaction between 5,5‐dimethyl‐4‐phenyl‐2‐oxy‐1,3,2‐dioxaphosphorinane phosphonate (DPODP) and p‐benzoquinone (BQ). The compound (DPODB) was used as a reactive flame retardant in o‐cresol formaldehyde novolac epoxy resin (CNE) for electronic application. The structure of DPODB was confirmed by FTIR and NMR spectra. Thermal properties of cured epoxy resin were studied using differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). The flame retardancy of cured epoxy resins was tested by UL‐94 vertical test and achieved UL‐94 vertical tests of V‐0 grade (nonflammable). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3842–3847, 2006     

Synthesis,characterization and fluorescence performance of a waterborne polyurethane‐based fluorescent dye 4‐amino‐N‐cyclohexyl‐1,8‐naphthalimide,WPU‐ACN

A waterborne‐polyurethane‐based fluorescent dye 4‐amino‐N‐cyclohexyl‐1,8‐naphthalimide (WPU‐ACN) was synthesized by attaching 4‐amino‐N‐cyclohexyl‐1,8‐naphthalimide (ACN) into polyurethane chains according to a prepolymer?ionomer process. The structure of WPU‐ACN was confirmed by means of Fourier transform infrared spectroscopy and UV?visible absorption. The number‐average molecular weight, glass transition temperature and average emulsion particle size for WPU‐ACN were determined as 7.8 × 10⁵ g mol^?1, 60 °C and 60 nm, respectively. The improved thermal stability of WPU‐ACN could be attributed to the incorporation of naphthalimide units in the preformed urethane groups. The fluorescence intensity of WPU‐ACN was dramatically enhanced compared with that of ACN. It was found that the fluorescence intensity of WPU‐ACN increased with increasing temperature, and the fluorescence spectra of WPU‐ACN showed a positive solvatochromic effect. In addition, the fluorescence of WPU‐ACN emulsion was very stable not only for long‐term storage but also for fluorescence quenching. © 2013 Society of Chemical Industry     

Well‐defined polymers containing 1,3‐dichloro‐tetra‐n‐butyl‐distannoxane moiety: Synthesis,mechanism, and applications in catalysis

A series of well‐defined different chain lengths polymers, which contain the organometallic 1,3‐dichloro‐tetra‐n‐butyl‐distannoxane core in the main chain, was obtained in one‐pot via a novel 1,3‐dichloro‐tetra‐n‐butyl‐distannoxane (complex A )/azobisisobutyronitrile (AIBN) initiating system used in reverse atom transfer radical polymerization of styrene in different concentrations. The introduction of organotin complex A was supported by ¹H‐NMR, ¹³C–NMR, and the Inductive Coupled Plasma Emission Spectrometer analysis of the organotin‐containing polymer. Moreover, the mechanism of polymerization was investigated by changing the ratio of complex A to AIBN. It was concluded that the complex A not only acted as an important part of the initiator system but also introduced the functional organometallic group into the polymer chain. Additionally, the organotin‐containing polymer could be used as catalyst for esterification, and the reaction products' conversion could reach high up to 99% and does not decrease after four successive cycles. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis,Crystal Structure,and Thermal Behaviors of 3‐Nitro‐1,5‐bis(4,4′‐dimethylazide)‐1,2,3‐triazolyl‐3‐azapentane (NDTAP)

The energetic material, 3‐nitro‐1,5‐bis(4,4′‐dimethyl azide)‐1,2,3‐triazolyl‐3‐azapentane (NDTAP), was firstly synthesized by means of Click Chemistry using 1,5‐diazido‐3‐nitrazapentane as main material. The structure of NDTAP was confirmed by IR, ¹H NMR, and ¹³C NMR spectroscopy; mass spectrometry, and elemental analysis. The crystal structure of NDTAP was determined by X‐ray diffraction. It belongs to monoclinic system, space group C2/c with crystal parameters a=1.7285(8) nm, b=0.6061(3) nm, c=1.6712(8) nm, β=104.846(8)°, V=1.6924(13) nm³, Z=8, μ=0.109 mm⁻¹, F(000)=752, and D_c=1.422 g cm⁻³. The thermal behavior and non‐isothermal decomposition kinetics of NDTAP were studied with DSC and TG‐DTG methods. The self‐accelerating decomposition temperature and critical temperature of thermal explosion are 195.5 and 208.2 °C, respectively. NDTAP presents good thermal stability and is insensitive.     

Generation of 11‐Fluoro‐11H‐indeno[1,2‐c]quinolines via a Palladium‐Catalyzed Three‐Component Reaction of 2‐Alkynylbromobenzenes, 2‐Alkynylanilines,and N‐Fluorobenzenesulfonimide

A novel and efficient synthesis of 11‐fluoro‐11H‐indeno[1,2‐c]quinolines has been developed via a palladium‐catalyzed three‐component reaction of 2‐alkynylbromobenzenes, 2‐alkynylanilines, and N‐fluorobenzenesulfonimide. The reaction works well with high selectivity. Additionally, the diversity and complexity could be easily introduced via a simple operation from readily available starting materials. In the meantime, a fluorine atom could be incorporated into the scaffold during the reaction process.     

Synthesis,Characterization, and Energetic Properties of N‐Rich Salts of the 4,5‐Dicyano‐2H‐1,2,3‐triazole Anion

The synthesis and characterization of the 4,5‐dicyano‐2H‐1,2,3‐triazole anion in its 5‐aminotetrazole, 1,5‐diaminotetrazole, and 1,5‐diamino‐4‐methyl‐tetrazole salts are reported. All compounds were characterized by IR, ¹H NMR, and ¹³C NMR spectroscopy, as well as elemental analyses. Their thermal decompositions were investigated by TG‐DSC. The densities, combustion heats, and sensitivity properties were tested. Additionally, enthalpies of formation, detonation pressures, detonation velocities, and heats of detonation were calculated. The compounds have potential application in the energetic materials field.     

Synthesis,extraction, and anti‐bacterial studies of some new bis‐1,2,4‐triazole derivatives part I

A series of new bis triazole Schiff base derivatives (4) were prepared in good yields by treatment of 4‐amino‐3,5‐diphenyl‐4H‐1,2,4‐triazole (3) with bisaldehydes (1). Schiff bases (4) were reduced with NaBH₄ to afford the corresponding bisaminotriazoles (5). All the new compounds were characterized by IR, ¹H NMR and ¹³C NMR spectral data. Their overall extraction (log K_ex) constants for 1 : 1 (M : L) complexes and CHCl₃/H₂O systems were determined at 25 ± 0.1°C to investigate the relationship between structure and selectivity toward various metal cations. The extraction equilibrium constants were estimated using CHCl₃/H₂O membrane transfer with inductively coupled plasma‐atomic emission spectroscopy spectroscopy. The stability sequence of the triazole derivatives in CHCl₃ for the metal cations was exhibited a characteristic preference order of extractability to metal ions [Fe(III) > Cu(II) > Pb(II) > Co(II) > Ni(II) > Mn(II) > Zn(II) > Mg(II) > Ca(II)]. The compounds were tested for anti‐microbial activity applying agar diffusion technique for 11 bacteria. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation,characterization, and properties of crosslinked hydroxylated poly(styrene‐b‐butadiene‐b‐styrene) triblock copolymer

Acrylic acid was crosslinked with N,N′‐methylenebisacrylamide and converted to bioactive hydrogels by neutralization with different amino containing compounds. Several amino containing compounds were used such as 2‐aminopyridine, triethanol amine, hexamethylenetetramine (HMTA), pyridine, and imidazole. The best crosslinker ratio was determined in addition to the maximum absorbed water in different mediums. The antibacterial activity of the prepared gels were examined against examples of Gram‐positive (Staphylococcus aureus) and Gram‐negative bacteria (Escherichia coli) using agar plate method. The study was extended by evaluating one of prepared gels in columns as models for water filters. All prepared gels showed antibacterial action in agar plate method against both bacterium and the column method using one of the prepared gels showed excellent filtration and biocidal action. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Characterization of 4,6‐Diazido‐N‐nitro‐1,3,5‐triazine‐2‐amine

4,6‐Diazido‐N‐nitro‐1,3,5‐triazine‐2‐amine (DANT) was prepared with a 35 % yield from cyanuric chloride in a three step process. DANT was characterized by IR and NMR spectroscopy (¹H, ¹³C, ¹⁵N), single‐crystal X‐ray diffraction, and DTA. The crystal density of DANT is 1.849 g cm⁻³. The cyclization of one azido group and one nitrogen atom of the triazine group giving tetrazole was observed for DANT in a dimethyl sulfoxide solution using NMR spectroscopy. An equilibrium exists between the original DANT molecule and its cyclic form at a ratio of 7 : 3. The sensitivity of DANT to impact is between that for PETN and RDX, sensitivity to friction is between that for lead azide and PETN, and sensitivity to electric discharge is about the same as for PETN. DANT′s heat of combustion is 2060 kJ mol⁻¹.     

Biodegradable poly(ester‐ether)s: ring‐opening polymerization of D,L‐3‐methyl‐1,4‐dioxan‐2‐one using various initiator systems

The synthesis and detailed characterization of racemic 3‐methyl‐1,4‐dioxan‐2‐one (3‐MeDX) are reported. The bulk ring‐opening polymerization of 3‐MeDX, to yield a poly(ester‐ether) meant for biomedical applications, in the presence of various initiators such as tin(II) octanoate, tin(II) octanoate/n‐butyl alcohol, aluminium tris‐isopropoxide and an aluminium Schiff base complex (HAPENAlOⁱPr) under varying experimental conditions is here detailed for the first time. Polymerization kinetics were investigated and compared with those of 1,4‐dioxan‐2‐one. The studies reveal that the rate of polymerization of 3‐MeDX is less than that of 1,4‐dioxan‐2‐one. Experimental conditions to achieve relatively high molar masses have been established. Thermodynamic parameters such as enthalpy and entropy of 3‐MeDX polymerization as well as ceiling temperature have been determined. Poly(D ,L ‐3‐MeDX) is found to possess a much lower ceiling temperature than poly(1,4‐dioxan‐2‐one). Poly(D ,L ‐3‐MeDX) was characterized using NMR spectroscopy, matrix‐assisted laser desorption ionization mass spectrometry, size exclusion chromatography and differential scanning calorimetry. This polymer is an amorphous material with a glass transition temperature of about ?20 °C. Copyright © 2010 Society of Chemical Industry     

Oxidative Aminocarbonylation of Terminal Alkynes for the Synthesis of Alk‐2‐ynamides by Using Palladium‐on‐Carbon as Efficient,Heterogeneous, Phosphine‐Free,and Reusable Catalyst

Palladium‐on‐carbon (Pd/C)‐catalyzed oxidative aminocarbonylations of alk‐1‐ynes with secondary amines provide the corresponding alk‐2‐ynamides in a good to excellent yields. This new methodology is applicable for the synthesis of a wide range of biologically active alk‐2‐ynamide derivatives. The developed protocol avoids the use of phosphine ligands, with an additional advantage of palladium catalyst recovery and reuse for up to four consecutive cycles.     

Synthesis,characterization, and application of novel amphiphilic poly(D‐gluconamidoethyl methacrylate)‐b‐polyurethane‐b‐ poly(D‐gluconamidoethyl methacrylate) triblock copolymers

Novel amphiphilic ABA‐type poly(D ‐gluconamidoethyl methacrylate)‐b‐polyurethane‐b‐poly(D ‐gluconamidoethyl methacrylate) (PGAMA‐b‐PU‐b‐PGAMA) tri‐block copolymers were successfully synthesized via the combination of the step‐growth and copper‐catalyzed atom transfer radical polymerization (ATRP). Dihydroxy polyurethane (HO‐PU‐OH) was synthesized by the step‐growth polymerization of hexamethylene diisocyanate with poly(tetramethylene glycol). PGAMA‐b‐PU‐b‐PGAMA block copolymers were synthesized via copper‐catalyzed ATRP of GAMA in N, N‐dimethyl formamide at 20°C in the presence of 2, 2′‐bipyridyl using Br‐PU‐Br as macroinitiator and characterized by ¹H‐NMR spectroscopy and GPC. The resulting block copolymer forms spherical micelles in water as observed in TEM study, and also supported by ¹H NMR spectroscopy and light scattering. Miceller size increases with increase in hydrophilic PGAMA chain length as revealed by DLS study. The critical micellar concentration values of the resulting block copolymers increased with the increase of the chain length of the PGAMA block. Thermal properties of these block copolymers were studied by thermo‐gravimetric analysis, and differential scanning calorimetric study. Spherical Ag‐nanoparticles were successfully synthesized using these block copolymers as stabilizer. The dimension of Ag nanoparticle was tailored by altering the chain length of the hydrophilic block of the copolymer. A mechanism has been proposed for the formation of stable and regulated Ag nanoparticle using various chain length of hydrophilic PGAMA block of the tri‐block copolymer. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Poly(para‐dioxanone)/poly(D,L‐lactide) blends compatibilized with poly(D,L‐lactide‐co‐para‐dioxanone)

The effect of poly(D ,L ‐lactide‐co‐para‐dioxanone) (PLADO) as the compatibilizer on the properties of the blend of poly(para‐dioxanone) (PPDO) and poly(D ,L ‐lactide) (PDLLA) has been investigated. The 80/20 PPDO/PDLLA blends containing from 1% to 10% of random copolymer PLADO were prepared by solution coprecipitation. The PLADO component played a very important role in determining morphology, thermal, mechanical, and hydrophilic properties of the blends. Addition of PLADO into the blends could enhance the compatibility between dispersed PDLLA phase and PPDO matrix; the boundary between the two phases became unclear and even the smallest holes were not detected. On the other hand, the position of the T_g was composition dependent; when 5% PLADO was added into blend, the T_g distance between PPDO and PDLLA was shortened. The blends with various contents of compatibilizer had better mechanical properties compared with simple PPDO/PDLLA binary polymer blend, and such characteristics further improved as adding 5% random copolymers. The maximum observed tensile strength was 29.05 MPa for the compatibilized PPDO/PDLLA blend with 5% PLADO, whereas tensile strength of the uncompatibilized PPDO/PDLLA blend was 14.03 MPa, which was the lowest tensile strength. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

One‐Pot Cascade Reactions using Fructose‐6‐phosphate Aldolase: Efficient Synthesis of D‐Arabinose 5‐Phosphate,D‐Fructose 6‐Phosphate and Analogues

One‐pot multienzymatic reactions have been performed for the synthesis of 1‐deoxy‐D ‐fructose 6‐phosphate, 1,2‐dideoxy‐D ‐arabino‐hept‐3‐ulose 7‐phosphate, D ‐fructose 6‐phosphate and D ‐arabinose 5‐phosphate. The whole synthetic strategy is based on an aldol addition reaction catalysed by fructose‐6‐phosphate aldolase (FSA) as a key step of a three or four enzymes‐catalysed cascade reaction. The four known donors for FSA – dihydroxyacetone (DHA), hydroxyacetone (HA), 1‐hydroxy‐2‐butanone (HB) and glycolaldehyde (GA) – were used with D ‐glyceraldehyde 3‐phosphate as acceptor substrate. The target phosphorylated sugars were obtained in good to excellent yields and high purity.     

Lecithin‐enhanced biotransformation of cholesterol to androsta‐1,4‐diene‐3,17‐dione and androsta‐4‐ene‐3,17‐dione

A biotransformation process using Mycobacterium sp was studied for androsta‐1, 4‐diene‐3,17‐dione (ADD) and androsta‐4‐ene‐3,17‐dione (AD) production from cholesterol. Cholesterol has a poor solubility in water (～1.8 mg dm^?3 at 25 °C), which makes it difficult to use as the substrate for biotransformation. Lecithin is a mixture of phospholipids of phosphatidylcholine (PC) and phosphatidylethanolamine (PE), which behave like surfactants and can form planar bi‐layer structures in an aqueous medium. Therefore, a small amount of lecithin (<1 g dm^?3) can be used to form stable colloids with cholesterol at a relatively high concentration (20 g dm^?3) in water. In this work, an energy density of 1000 J cm^?3 from sonication was provided to overcome the self‐association of cholesterol and to generate a stable lecithin–cholesterol suspension that could be used for enhanced biotransformation. The lecithin–cholesterol suspension was stable and could withstand typical autoclaving conditions (121 °C, 15 psig, 20 min). In contrast to conventional surfactants, such as Tween 80, that are commonly used to help solubilize cholesterol, lecithin did not change the surface tension of the aqueous solution nor cause any significant foaming problem. Lecithin was also biocompatible and showed no adverse effect on cell growth. Compared with the medium with Tween 80 as the cholesterol‐solubilizing agent, lecithin greatly improved the biotransformation process in regard to its final product yield (～59% w/w), productivity (0.127–0.346 g dm^?3 day^?1), ADD/AD ratio (6.7–8), as well as the long‐term process stability. Cells can be reused in repeated batch fermentations for up to seven consecutive batches, but then lose their bioactivity due to aging problems, possibly caused by product inhibition and nutrient depletion. © 2002 Society of Chemical Industry     

The reaction mechanism of diethyl‐2,3‐dicyano‐2,3‐di(p,m‐dimethoxylphenyl) succinate with styrene

The radical polymerization of styrene (ST) can be initiated by diethyl‐2,3‐dicyano‐2,3‐di(dimethoxyphenyl) succinate (ECPS). The reaction mechanism has been studied by means of UV, H¹‐NMR, product analysis, gel permeation chromatography, electronic spin resonance (ESR), and the conversion of monomer via time. These experimental results indicate that ECPS probably takes the place of complex with ST, and the complex interaction between ECPS and ST can take advantage of the dissociation of the C C bond. The complex interaction and thermal effect are the important factors causing the dissociation of C C bond. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1140–1145, 1999     

Ene‐Carbonyl Reductive Coupling for the Synthesis of 3,3‐Disubstituted Phthalide, 3‐Hydroxyisoindolin‐1‐one and 3‐Hydroxyoxindole Derivatives

An efficient method for the synthesis of three classes of heterocyclic derivatives such as 3,3‐disubstituted phthalides, 3‐hydroxyisoindolin‐1‐ones and 3‐hydroxyoxindoles, is reported. In the presence of the simple reductive system, zinc (Zn)/ammonia (NH₃) [or zinc‐copper (Zn‐Cu)/ammonia], a wide range of alkenes including acrylates, acrylonitrile, acrylamide and vinyl sulfoxide underwent reductive coupling with methyl 2‐acylbenzoates and subsequent lactonization to provide 3,3‐disubstituted phthalides in good to high yields at ambient temperature. In a similar manner, 3‐hydroxyisoindolin‐1‐one and 3‐hydroxyoxindole derivatives could also be easily prepared by direct reductive coupling of phthalimides and N‐substituted isatins with activated alkenes, respectively. Application of this methodology towards the synthesis of 1‐naphthol derivatives on a gram scale is also depicted. Furthermore, the intramolecular phthalimides–ene reductive coupling afforded the respective cyclization products with high diastereoselectivity.

     

Copper‐in‐Charcoal‐Catalyzed,Tandem One‐Pot Diazo Transfer‐Click Reactions

Copper‐in‐charcoal (Cu/C) is an effective heterogeneous catalyst for tandem diazo transfer/click reactions. In the presence of Cu/C, various azides can be generated in situ from the corresponding amines, and subsequently undergo [3+2] cycloaddition with terminal alkynes to afford triazoles in good yields. The catalyst is also easily recycled.