Highly Enantioselective Michael Addition of Cyclic 1,3‐Dicarbonyl Compounds to β,γ‐Unsaturated α‐Keto Esters

A highly enantioselective Michael addition of cyclic 1,3‐dicarbonyl compounds to β,γ‐unsaturated α‐keto esters catalyzed by amino acid‐derived thiourea‐tertiary‐amine catalysts is presented. Using 5 mol% of a novel tyrosine‐derived thiourea catalyst, a series of chiral coumarin derivatives were obtained in excellent yields (up to 99%) and with up to 96% ee under very mild conditions within a short reaction time.     

Characterization of mechanical properties of γAl2O3 dispersed epoxy resin cured by γ‐ray radiation

Epoxy resins are widely utilized as high performance thermosetting resins for many industrial applications, but they are characterized by relatively low toughness. Incorporation of rigid inorganics is suggested to improve the mechanical properties of epoxy resins. An attempt is made to disperse nanosized γ‐Al₂O₃ particles into diglycidyl ether of bisphenol A epoxy resins for the improvement of the mechanical properties. These hybrid epoxy–alumina composites are prepared using by the γ‐ray curing technique conducted at 100 kGy under nitrogen at room temperature. The composites are characterized by determining the gel content, flexural strength, Youngis modulus, and toughness at room temperature using scanning electron microscopy and FTIR studies. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1898–1903, 2004     

Regio‐ and Enantioselective Copper‐Catalyzed 1,4‐Conjugate Addition of Trimethylaluminium to Linear α,β,γ,δ‐Unsaturated Alkyl Ketones

A regio‐ and enantioselective copper‐catalyzed 1,4‐conjugate addition of trimethylaluminium to linear δ‐aryl‐substituted α,β,γ,δ‐unsaturated alkyl ketones was developed. A series of γ,δ‐unsaturated alkyl ketones were obtained in good yields with high regio‐ and enantioselectivity (up to 88% ee and 96:4 dr). Expansion of the reaction scope to substrates containing aromatic heterocycles also afforded good yields and enantioselectivities (up to 91% ee) with very high regioselectivities, exclusively providing the single 1,4‐products.

     

Synthesis and characterization of polyimide‐γ‐Fe2O3 nanocomposites

Novel polyimide‐γ‐Fe₂O₃ hybrid nanocomposite films (PI/γ‐Fe₂O₃) has been developed from the poly(amic acid) salt of oxydianiline with different weight percentages (5, 10, 15 wt %) of γ‐Fe₂O₃ using tetrahydrofuran (THF) and N,N‐dimethylacetamide (DMAc) as aprotic solvents. The prepared polyimide‐γ‐Fe₂O₃ nanocomposite films were characterized for their structure, morphology, and thermal behavior employing Fourier transform infrared spectroscopy (FTIR), scanning electron micrograph (SEM), transmission electron micrograph (TEM), X‐ray diffraction (XRD), ¹³C‐NMR, and thermal analysis (TGA/DSC) techniques. These studies showed the homogenous dispersion of γ‐Fe₂O₃ in the polyimide matrix with an increase in the thermal stability of the composite films on γ‐Fe₂O₃ loadings. Magnetization measurements (magnetic hysteresis traces) have shown very high values of coercive force indicating their possible use in memory devices and in other related applications. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 834–840, 2007     

Ruthenium(II)‐Catalyzed Protocol for Preparation of Diverse α,β‐ and β,β‐Dihaloenones from Diazodicarbonyls

Efficient one‐step syntheses of α,β‐ and β,β‐dihaloenones were achieved by ruthenium(II)‐catalyzed reactions between cyclic or acyclic diazodicarbonyl compounds and oxalyl chloride or oxalyl bromide in moderate to good yields. This methodology offers several significant advantages, which include ease of handling, mild reaction conditions, one‐step reaction, and the use of an effective and non‐toxic catalyst. The synthesized compounds were further transformed into highly functionalized novel molecules bearing aromatic rings on the enone moiety using the Suzuki reaction.

     

Palladium(II)‐Catalyzed Aerobic Intermolecular Cyclization of Acrylic Acid with Alkenes to α‐Methylene‐γ‐butyrolactones

The methodology in this article is a palladium(II)/copper(II)‐ or palladium(II)‐catalyzed intermolecular cyclization of acrylic acid with alkenes to produce α‐methylene‐γ‐butyrolactone derivatives using molecular oxygen as an environmentally benign oxidant. In this system, the carboxylato, especially trifluoroacetato, or trimethylacetato ligand, plays a quite important role to afford a high catalytic activity by suppressing the deposition of palladium(0) black.     

Effect of nucleating duality on the formation of γ‐phase in a β‐nucleated isotactic polypropylene copolymer

BACKGROUND: It is a challenge for polymer processing to promote the formation of γ‐phase under atmospheric conditions in isotactic polypropylene (iPP) copolymer containing chain errors. Incorporation of an α‐nucleator in iPP copolymer seems reasonable since it can enhance non‐isothermal crystallization. Up to now, however, the issue regarding a β‐nucleated iPP copolymer still remains unclear, which is the subject of this study. RESULTS: The results indicate that the γ‐phase indeed occurs in a β‐nucleated random iPP copolymer with ethylene co‐unit (PPR) sample and becomes predominant at slow cooling rates (e.g. 1 °C min^?1) where the formation of the β‐form is suppressed to a large extent. With detailed morphological observations the formation of γ‐phase in the β‐nucleated PPR sample at slow cooling rate is unambiguously attributed to the nucleating duality of the β‐nucleator towards α‐ and β‐polymorphs. The α‐crystals, induced by the β‐nucleator, serve as seeds for the predominant growth of the γ‐phase. Moreover, the presence of the β‐nucleator, acting as heterogeneous nuclei, promotes the formation of γ‐phase in the nucleated PPR sample, at least to some extent. CONCLUSION: The findings in this study extend our insights into the formation of γ‐phase in β‐nucleated iPP copolymer and, most importantly, provide an alternative route to obtain iPP rich in γ‐phase. Copyright © 2008 Society of Chemical Industry     

Thermogravimetric analysis of poly(3‐hydroxybutyrate) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)

The thermal degradation of poly(3‐hydroxybutyrate) (PHB) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) [P(HB‐HV)] was studied using thermogravimetry (TG). In the thermal degradation of PHB, the temperature at the onset of weight loss (T_o) was derived by T_o = 0.97B + 259, where B represents the heating rate (°C/min). The temperature at which the weight loss rate was maximum (T_p) was T_p = 1.07B + 273, and the final temperature (T_f) at which degradation was completed was T_f = 1.10B + 280. The percentage of the weight loss at temperature T_p (C_p) was 69 ± 1% whereas the percentage of the weight loss at temperature T_f (C_f) was 96 ± 1%. In the thermal degradation of P(HB‐HV) (7:3), T_o = 0.98B + 262, T_p = 1.00B + 278, and T_f = 1.12B + 285. The values of C_p and C_f were 62 ± 7 and 93 ± 1%, respectively. The derivative thermogravimetric (DTG) curves of PHB confirmed only one weight loss step change because the polymer mainly consisted of the HB monomer only. The DTG curves of P(HB‐HV), however, suggested multiple weight loss step changes; this was probably due to the different evaporation rates of the two monomers. The incorporation of 10 and 30 mol % of the HV component into the polyester increased the various thermal temperatures (T_o, T_p, andT_f) by 7–12°C (measured at B = 20°C/min). © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2237–2244, 2001     

Structural characterization of α‐ and β‐nucleated isotactic polypropylene

Modification of isotactic polypropylene (iPP) with two nucleation agents, namely 1,3:24‐bis(3,4‐dimethylobenzylideno) sorbitol (DMDBS) (α‐nucleator) and N, N′‐dicyclohexylo‐2,6‐naphthaleno dicarboxy amide (NJ) (β‐nucleator), leads to significant changes of the structure, morphology and properties. Both nucleating agents cause an increase in the crystallization temperature. The efficiency determined in a self‐nucleation test is 73.4 % for DMDBS and 55.9 % for NJ. The modification with NJ induces the creation of the hexagonal β‐form of iPP. The addition of DMDBS lowers the haze of iPP while the presence of NJ increases the haze. Copyright © 2004 Society of Chemical Industry     

Kinetics of antioxidant action of α‐ and γ‐toco‐pherols in sunflower and soybean triacylglycerols

A kinetic analysis was performed to evaluate the antioxidant behavior of α‐ and γ‐to‐copherols (5—2000 ppm) in purified triacylglycerols obtained from sunflower oil (TGSO) and soybean oil (TGSBO) at 100 °C. Different kinetic parameters were determined, viz. the stabilization factor as a measure of effectiveness, the oxidation rate ratio as a measure of strength, and the antioxidant activity which combines the other two parameters. In the low concentration range (up to 400 ppm in TGSBO and up to 700 ppm in TGSO) α‐tocopherol was a more active antioxidant than γ‐tocopherol whereas the latter was more active at higher concentrations. It has been found that the different activity of the tocopherols is not due to their participation in chain initiation reactions, but that the loss of antioxidant activity at high tocopherol concentrations is due to their consumption in side reactions. The rates of these reactions are higher in TGSBO than in TGSO. Both α‐tocopherol itself and its radicals participated more readily in side reactions than γ‐tocopherol and its radicals. Both α‐ and γ‐tocopherol reduce lipid hydroperoxides, thus generating alkoxyl radicals which are able to amplify the rate of lipid oxidation by participating in chain propagation reactions.     

Efficient Synthesis of β,γ‐Alkynyl α‐Amino Acid Derivatives by Ag(I)‐Catalyzed Alkynylation of α‐Imino Esters

The first catalytic synthesis of β,γ‐alkynyl α‐amino acid derivatives was achieved by direct addition of terminal alkynes to α‐imino esters in the presence of an Ag(I) salt under mild reaction conditions.     

Separation of bovine serum albumin (BSA) using γ‐Al2O3–clay composite ultrafiltration membrane

BACKGROUND: Ceramic membranes have received more attention than polymeric membranes for the separation and purification of bio‐products owing to their superior chemical, mechanical and thermal properties. Commercially available ceramic membranes are too expensive. This could be overcome by fabricating membranes using low‐cost raw materials. The aim of this work is to fabricate a low‐cost γ‐Al₂O₃–clay composite membrane and evaluate its potential for the separation of bovine serum albumin (BSA) as a function of pH, feed concentration and applied pressure. To achieve this, the membrane support is prepared using low‐cost clay mixtures instead of very expensive alumina, zirconia and titania materials. The cost of the membrane can be further reduced by preparing a γ‐alumina surface layer on the clay support using boehmite sol synthesized from inexpensive aluminium chloride instead of expensive aluminium alkoxide using a dip‐coating technique. RESULTS: The pore size distribution of the γ‐Al₂O₃‐clay composite membrane varied from 5.4–13.6 nm. The membrane was prepared using stable boehmite sol of narrow particle size distribution and mean particle size 30.9 nm. Scanning electron microscopy confirmed that the surface of the γ‐Al₂O₃–clay composite membrane is defect‐free. The pure water permeability of the support and the composite membrane were found to be 4.838 × 10^?6 and 2.357 × 10^?7 m³ m^?2 s^?1 kPa^?1, respectively. The maximum rejection of BSA protein was found to be 95%. It was observed that the separation performance of the membrane in terms of flux and rejection strongly depends on the electrostatic interaction between the protein and charged membrane. CONCLUSION: The successively prepared γ‐Al₂O₃‐clay composite membrane proved to possess good potential for the separation of BSA with high yield and could be employed as a low cost alternate to expensive ceramic membranes. Copyright © 2009 Society of Chemical Industry     

Poly‐α,β‐(3‐hydroxypropyl)‐DL‐aspartamide: A new drug carrier

Poly‐α,β‐(3‐hydroxypropyl)‐DL ‐aspartamide (PHPA) was synthesized by the ring‐open reaction of polysuccinimide (PSI) and 3‐hydroxypropylamine. The polymer was characterized by ¹H‐NMR, ¹³C‐NMR, FTIR, and GPC. Mark–Houwink coefficients were obtained from viscometry and GPC measurements, K = 5.53 × 10⁻³ and α = 0.78 in water. The acute toxicity of PHPA was examined and it revealed no death in ICR mice up to the dose treated of 15.3 kg/kg, and hematological parameters showed no significant difference between treated and control animals. The potential use of PHPA as a drug carrier was also investigated. In a typical case, a contraceptive drug, norethindrone (NET), was bonded to PHPA, and the drug sustained released as long as 120 days an in vitro test. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2411–2417, 2000     

Functionalization of crosslinked polyacrylamide through γ‐radiation‐induced grafting of 4‐vinylpyridine

Crosslinked polyacrylamide beads were irradiated in air with a Co⁶⁰ γ‐radiation source. The preirradiated beads were graft‐copolymerized through heating with 4‐vinylpyridine in the presence of benzoyl peroxide. Grafting was studied as a function of various reaction parameters and was determined from the increase in the weight of the original polymer and the estimation of pyridine pendants in the homopolymer‐free graft copolymer. Although making the polymer basic in character, this modification retained the hydrophilic nature of polyacrylamide. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2613–2620, 2002     

Synthesis of α‐Arylphosphonates using Copper‐Catalyzed α‐Arylation and Deacylative α‐Arylation of β‐Ketophosphonates

Efficient methods for the direct arylation and deacylative arylation of β‐ketophosphonates with iodoarenes in presence of a copper(I) or a copper(II) salt as the catalysts have been developed. The corresponding α‐arylphosphonates were obtained in high yields. A tentative mechanism for the deacylative arylation reaction was proposed on the basis of the experimental data.     

Enantioselective Synthesis of 4H‐Pyrans Through Organocatalytic Asymmetric Formal [3+3] Cycloadditions of 2‐(1‐Alkynyl)‐2‐alken‐1‐ones with β‐Keto Esters

4H‐Pyran units are frequently present in molecules with significant biological and pharmaceutical activities. Herein, we present the first enantioselective formal [3+3] cycloaddition between 2‐(1‐alkynyl)‐2‐alken‐1‐ones and β‐keto esters catalyzed by a cyclohexyldiamine‐based thiourea‐tertiary amine bifunctional catalyst. Under the mild and eco‐friendly conditions, a wide range of polysubstituted 4H‐pyrans were obtained in moderate yields with good enantioselectivities.

     

Structural elucidation and iron oxidation states in situ formed β‐Ca3(PO4)2/α‐Fe2O3 composites

A detailed structural analysis on the in situ synthesized β‐Ca₃(PO₄)₂/α‐Fe₂O₃ composites is demonstrated. Compositional ratios, the influence and occupancy of iron at the β‐Ca₃(PO₄)₂ lattice, oxidation state of iron in the composites are derived from analytical techniques involving XRD, FT‐IR, Raman, refinement of the powder X‐ray diffraction and X‐ray photoelectron spectroscopy. Iron exists in the Fe³⁺ state throughout the investigated systems and favors its occupancy at the Ca²⁺(5) site of β‐Ca₃(PO₄)₂ until critical limit, and thereafter crystallizes as α‐Fe₂O₃ at ambient conditions. Fe³⁺ occupancy at the β‐Ca₃(PO₄)₂ lattice yields a Ca₉Fe(PO₄)₇ structure that is isostructural with its counterpart. A strong rise in the soft ferromagnetic behavior of β‐Ca₃(PO₄)₂/α‐Fe₂O₃ composites is obvious that depends on the content of α‐Fe₂O₃ in the composites. Overall, the diverse level of iron inclusions at the calcium phosphate system with a Ca/P ratio of 1.5 yields a structurally stable β‐Ca₃(PO₄)₂/α‐Fe₂O₃ composites with assorted compositional ratios.     

Effect of Processing Variables on the Solution Characteristics of γ-Glycidoxypropyltrimethoxysilane (γ-GPS)

The effects of the hydrolysis and condensation processes on the molecular structure of γ-glycidoxypropyltrimethoxysilane (γ-GPS) in aqueous solutions were investigated using Fourier-transform nuclear magnetic resonance (FT-NMR) spectroscopy and FT-Raman spectroscopy. Hydrolysis was characterized by monitoring the production of methanol and the decrease in concentration of SiOCH₃ groups in 1% solutions of deuterium oxide using proton NMR. The production of methanol and loss of methoxy groups in 25% solutions of γ-GPS in water was characterized using Raman spectroscopy. Hydrolysis was found to be a very rapid process, whose rate could be increased or decreased by altering the pH of the solution. NMR spectroscopy showed that hydrolysis was complete in a 1% γ-GPS solution in deuterium oxide after 34 minutes. Raman spectroscopy also showed hydrolysis to be rapid and complete in a 25% solution of γ-GPS in water after 1 hour. Condensation, on the other hand, took a relatively long time to occur. In the NMR spectra, condensation was observed by the broadening of peaks due to the protons on the carbon atom adjacent to the silicon atom. In the Raman spectra, condensation was characterized by the disappearance of the SiOH band near 725 cm^-1 and the development of an SiOSi band near 600 cm^-1. In addition to the proton NMR, Si-29 NMR was used to characterize the silane in 10% solutions of γ-GPS in water. The Si-29 NMR showed oligomer growth with respect to time. The oligomer growth was correlated with mechanical test results.     

The Synthesis of trans‐Perhydroindolic Acids and their Application in Asymmetric Domino Reactions of Aldehyde Esters with β,γ‐Unsaturated α‐Keto Esters

(2S,3aR,7aS)‐Perhydroindolic acid, the key intermediate in the synthesis of trandolapril, and its trans‐isomers, were readily prepared. These proline‐like molecules are unique in that they contain a rigid bicyclic structure, with two hydrogen atoms trans to each other at the bridgehead carbon atoms. These molecules were used successfully as chiral organocatalysts in asymmetric domino Michael addition/cyclization reactions of aldehyde esters with β,γ‐unsaturated α‐keto esters. They proved to have excellent catalytic behavior, allowing for the synthesis of multi‐substituted, enantiomerically enriched hemiacetal esters. Under optimal conditions (using 10 mol% catalyst loading), a series of β,γ‐unsaturated α‐keto esters was examined with up to 99% de, ee and yield, respectively. Additionally, the enantiomerically enriched hemiacetal esters could be readily transformed into their corresponding bioactive pyrano[2,3‐b]pyrans (possessing a multi‐substituted bicyclic backbone).