丙烯腈/醋酸乙烯酯/甲基丙烯磺酸钠共聚体系竞聚率的研究

利用核磁共振技术测定共聚物组成,用Ｍａｙｏ－Ｌｅｗｉｓ共聚物组成方程拟合实验数据计算竞聚率。得到的丙烯腈／醋酸乙烯酯（ＡＮ／ＶＡｃ）本体共聚的竞聚率数据用于分析间歇聚合反应试验,理论计算与试验数据吻合。并研究了丙烯腈／醋酸乙烯酯／甲基丙烯磺酸钠（ＡＮ／ＶＡｃ／ＳＭＡＳ）三元水相共聚反应体系的特征,测定了该三元共聚体系表观竞聚率     

Semicontinuous thermal bulk copolymerization of styrene and maleic anhydride: Experiments and reactor model

Thermal bulk copolymerization of styrene (St) and maleic anhydride (MAH) has been carried out at 110–130°C and up to around 55 wt % conversion in a stirred tank reactor with an anchor impeller to prepare the random copolymer of St–MAH (R-SMA). A series of experiments in semicontinuous monomer adding process were done to investigate the effects of operating condition on monomer conversion, copolymer composition, and its uniformity. It has been shown that a random copolymer with constant composition can be obtained by semicontinuous copolymerization. A reactor model was developed to simulate the copolymerization processes. The numerical method in which the gel effect on the copolymerization is incorporated has exhibited excellent agreement between the model calculation and the experimental data. However, when using the assumption that (1) k₂₂ = 0; (2) k₂₁[M₁] ≫ k₁₂[M₂]; and (3) (R₁/2k_t)^1/2 is a constant, an analytical solution to the model was found to be available also. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67:1905–1912, 1998     

Acrylonitrile/vinyl acetate copolymer nanofibers with different vinylacetate content

In this study, free radical copolymerization of acrylonitrile (AN)–vinyl acetate (VAc) was performed for five different feed ratio of VAc (wt %) by using ammonium persulfate (APS) in the aqueous medium. The effect of VAc content on the spectrophotometric and thermal properties of AN–VAc copolymers was investigated by Fourier Transform Infrared–Attenuated Total Reflectance spectrophotometer (FTIR–ATR), differential scanning calorimeter (DSC), and thermal gravimetric analyzer (TGA). Thermal stability of homopolymer of AN is improved after being copolymerized. The electrospun P(AN‐co‐VAc) nanofibers were fabricated and the effect of VAc content on the morphologic properties of nanofibers was studied by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The viscosity of the solution had a significant effect on P(AN‐co‐VAc) electrospinning and the nanofiber morphology. The average diameters of P(AN‐co‐VAc) nanofibers decreased 3.4 times with increasing feed ratio of VAc wt %. The P(AN‐co‐VAc) electrospun nanofiber mats, with the feed ratio of 30 wt % VAc, can be used as a nanofiber membrane in filtration and as a carbon nanofiber precursor for energy storage applications due to high surface to volume ratio, high thermal stability, homogeneous, and thinner nanofiber distribution. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Off‐line monitoring of butyl acrylate and vinyl acetate homopolymerization and copolymerization in toluene

A study of butyl acrylate (BA) and vinyl acetate (VAc) solution homopolymerization and copolymerization in toluene was carried out. The conversion and copolymer composition were monitored using traditional techniques (gravimetry and ¹H‐NMR spectroscopy) and attenuated total reflectance‐Fourier transform IR (ATR‐FTIR) spectroscopy with a diamond‐composite probe and light conduit technology. The peak height of the characteristic absorbances of the monomer(s) during the course of the reaction was used to calculate the conversion and copolymer composition for the ATR‐FTIR monitoring. The data obtained using a ReactIR? 1000 reaction analysis system in the off‐line mode showed very good agreement with data obtained using traditional techniques. The solvent effects on BA and VAc solution homopolymerizations and copolymerizations in toluene were also investigated. Improvement to model predictions was obtained by allowing the lumped constant (k_p/k) to vary with the solvent concentration. Experimental data and model predictions of the number‐ and weight‐average molecular weights for the investigated systems are also presented. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2958–2977, 2001     

Continuous thermal bulk copolymerization of styrene and maleic anhydride

Thermal bulk copolymerization of styrene (monomer 1) and maleic anhydride (monomer 2) was carried out in a continuous stirred tank reactor (CSTR) with a double helical ribbon-anchor impeller. A series of experimental runs under different operating conditions (average residence time, reaction temperature, and the composition in the inflow stream) were done, which showed that steady states could be approached. The effect of operating conditions on monomer conversion and copolymer composition was discussed. A CSTR model was established and the model parameters from the semicontinuous tests were used to predict conversions and copolymer compositions of the continuous process under transient and steady states. Kinetics from the semicontinuous bulk copolymerization were transferable to the continuous process. The modeling work for the continuous process showed that the same result as in a semicontinuous process could be obtained; the numerical method in which the gel effect on the copolymerization was incorporated exhibited excellent agreement between the model calculation and the experimental data. However, when using the assumption that k₂₂ = 0, k₂₁[M₁] ≫ k₁₂[M₂], (R_I/2k_t)^1/2 is a constant, and V is a constant, the predictions from the analytical solution to the model were in good agreement with the actual process data. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 615–622, 1999     

丙烯腈/醋酸乙烯酯/甲基丙烯磺酸钠三元水相共聚体系竞聚率的研究

根据该AN/VAC/SMAS三元共聚体系特征,根据竞聚率计算的原理,融合二元共聚和三元共聚的基础理论,利用核磁共振技术测定共聚物组成,用Mayo-lewis共聚物组成方程拟合实验数据计算竞聚率.同时研究了AN/VAC/SMAS三元水相共聚反应体系的特征,测定了该三元共聚体系表现竞聚率.     

On‐line monitoring of methyl methacrylate–vinyl acetate emulsion copolymerization

An adaptive calorimetric method, coupled with state estimators for emulsion copolymerization, is shown to provide accurate, on‐line information on the evolution of the composition and kinetics of an emulsion copolymerization. This method was evaluated for the emulsion copolymerization of methyl methacrylate–vinyl acetate (MMA–VAc) under nonisothermal conditions. In addition to providing on‐line estimates of the number of moles of each polymerizing species in the reactor, the state estimator provides a value for a lumped kinetic parameter proportional to the product of n N_p. This information can be combined with off‐line measurements to study the evolution of polymerization kinetics and to explain the trends observed for the molecular weight distribution and glass transition temperatures. Values of n were found to vary from 0.5 to 30 for the homopolymerization of MMA. However, the presence of VAc in the copolymerizing system drastically reduces n . This can lead to a dramatic increase in the average molecular weight of the copolymer since it alters the ratio of propagation to termination in the polymerizing particles. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 1667–1683, 2000     

Kinetic study of radical polymerization. VII. Investigation into the solution copolymerization of acrylonitrile and itaconic acid by real‐time 1H NMR spectroscopy

Free radical solution copolymerization of acrylonitrile (AN) and itaconic acid (IA) was performed with DMSO‐d₆ as the solvent and 2,2′‐azobisisobutyronitrile (AIBN) as the initiator. Weight ratio of the monomers to solvent and molar ratio of initiator to monomers were constant in all experiments. The initial comonomer composition was the only variable in this study. On‐line ¹H NMR spectroscopy was applied to follow individual monomer conversion. Mole fraction of AN and IA in the reaction mixture (f) and in the copolymer chain (F) were measured with progress of the copolymerization reaction. Overall monomer conversion versus time and also compositions of monomer mixture and copolymer as a function of overall monomer conversion were calculated from the data of individual monomer conversion versus time. Total rate constant for the copolymerization reaction was calculated by using the overall monomer conversion versus time data and then k_p/k_t^0.5 was estimated. The dependency of k_p/k_t^0.5 on IA concentration was studied and it was found that this ratio decreases by increasing the mole fraction of IA in the initial feed. The variation of comonomer and copolymer compositions as a function of overall monomer conversion was calculated theoretically by the terminal model equations and compared with the experimental data. Instantaneous copolymer composition curve showed the formation of alternating copolymer chain during copolymerization reaction. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3253–3260, 2007     

Effects of water solubility of acrylonitrile on vinylidene chloride/acrylonitrile/styrene suspension polymerization

The water solubility of acrylonitrile (AN) and its effects on vinylidene chloride/acrylonitrile/styrene (VDC/AN/St) suspension copolymerization were investigated in this study. It shows that the VDC/St ratio and the presence of suspending agent have no obvious influences on AN phase partition between the monomer and aqueous phases, whereas the water solubility of AN increases as temperature increases. Polymerization in the aqueous phase occurs extensively with azobis(isobutyronitrile) (AIBN) as initiator, whereas with lauryl peroxide (LPO) as initiator, polymerization in the aqueous phase is negligible. Theoretical analysis and experimental results indicate that transport of the monomer molecule is possible during polymerization. Both VDC and AN transfer from the monomer phase to the aqueous phase when AIBN is used as initiator. AN transfers from the aqueous phase to the monomer phase for the polymerization system initiated by LPO. Sodium nitrite (NaNO₂), but not sodium sulfide (Na₂S), can be used to effectively inhibit polymerization in water and exerts less influence on the polymerization in the monomer phase. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1431–1438, 2001     

Kinetic study by differential scanning calorimetry of the bulk copolymerization of 2‐hydroxyethylmethacrylate with ethyleneglycoldimethacrylate

This article presents a kinetic study of the copolymerization of 2‐hydroxyethylmethacrylate (HEMA) with ethyleneglycoldimethacrylate (EGDMA). First, the rate constant of decomposition, k_d, of azobisisobutyronitrile (AIBN) used to initiate the copolymerization was investigated. Then, the reactivity ratios, r₁ and r₂, of the monomers (HEMA and EGDMA), and the termination rate constant, k_t, were determined. Rate constants were obtained by differential scanning calorimetry (DSC) experiments. The decomposition rate constant of AIBN follows an Arrhenius law in the temperature range 320–400 K. Copolymerizations were carried out in the pans of the DSC apparatus at 353 K. The reactivity ratios, determined after analysis of the mixture composition by gas chromatography, exploitation of the data using the Meyer and Lowry equation, and a numerical method, were found equal to r₁ = 0.811 and r₂ = 6.548. Also from the reaction rate obtained by DSC, the dependence of the termination rate constant with conversion and temperature has been established. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1220–1228, 2001     

Starve fed emulsion copolymerization of vinyl acetate and 1‐hexene at ambient pressure

A novel emulsion copolymer of vinyl acetate (VAc) and 1‐hexene was synthesized at ambient pressure. The feeding technique, initiation system and reaction time of the copolymerization were optimized based on molecular characteristics such as the weight contribution of 1‐hexene in the copolymer chains and glass transition temperature (T_g) as well as on bulk properties like minimum film‐formation temperature (MFFT) and solid content. According to nuclear magnetic resonance spectroscopy and differential scanning calorimetry results, the combination of starve feeding and redox initiation, within a reaction time of 4 h, effectively led to the copolymerization at ambient pressure between highly reactive polar VAc monomers and non‐polar 1‐hexene monomers of low reactivity. The copolymer showed a lower T_g and MFFT, and a reasonable solid content compared to the poly(vinyl acetate) (PVAc) homopolymer. The consumption rate, hydrolysis of acetate groups and chain transfer reactions during the polymerization were followed using infrared spectroscopy. Based on the results, the undesirable reactions between the VAc blocks were hindered by the neighbouring 1‐hexene molecules. Tensile testing revealed an improvement in the toughness and elongation at break of VAc–1‐hexene films compared to PVAc films. © 2014 Society of Chemical Industry     

Preparation of high molecular weight poly(vinyl alcohol) with high yield using low‐temperature solution polymerization of vinyl acetate

Vinyl acetate (VAc) was solution‐polymerized in tertiary butyl alcohol (TBA) and in dimethyl sulfoxide (DMSO) having low chain transfer constant at 30, 40, and 50°C, using a low temperature initiator, 2,2′‐azobis(2,4‐dimethylvaleronitrile) (ADMVN). The effects of polymerization temperature and initiator concentration were investigated in terms of polymerization behavior and molecular structures of poly(vinyl acetate) (PVAc) and corresponding poly(vinyl alcohol) (PVA) obtained by saponification with sodium hydroxide. The polymerization rates of VAc in TBA and in DMSO were proportional to the 0.49 and 0.72 powers of ADMVN concentration, respectively. For the same polymerization conditions, TBA was absolutely superior to DMSO in increasing the molecular weight of PVA. In contrast, TBA was inferior to DMSO in causing conversion to polymer, indicating that the initiation rate of VAc in TBA was lower than that in DMSO. These effects could be explained by a kinetic order of ADMVN concentration calculated using initial rate method and by an activation energy difference of polymerization obtained from the Arrhenius plot. Low‐temperature solution polymerization of VAc in TBA or DMSO by adopting ADMVN proved successful in obtaining PVA of high molecular weight (number–average degree of polymerization (P_n): 4100–6100) and of high yield (ultimate conversion of VAc into PVAc: 55–80%) with diminishing heat generated during polymerization. In the case of bulk polymerization of VAc at the same conditions, maximum P_n and conversion of 5200–6200 and 20–30% was obtained, respectively. The P_n and lightness were higher, and the degree of branching was lower with PVA prepared from PVAc polymerized at lower temperatures in TBA. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1003–1012, 2001     

Comparison of characteristics of SAN–MMT nanocomposites prepared by emulsion and solution polymerization

Nonextractable styrene–acrylonitrile copolymer–montmollironite (SAN–MMT) nanocomposites were prepared by two different intercalation process: (1) a usual one‐step emulsion copolymerization in the presence of the Na⁺–MMT; and (2) a solution copolymerization with MMT modified by dimethyl dihydrogenated tallow ammonium. For comparative purposes, the copolymerization conditions (such as comonomer feed ratio and the polymerization temperature and times) were set up to be the same. The X‐ray diffraction pattern demonstrated that the net increase of basal spacing of the purified emulsion products (0.76 nm) far exceeded that of composite (0.39 nm) prepared by solution method. The average molecular masses recovered from the composite extracts revealed M_w = 53 × 10⁴ for emulsion products, while the composite made by solution yielded M_w = 4.8 × 10⁴ g/mol. Likewise, the hybrid from the emulsion polymerization exhibited higher stress at maximum load over the solution products. The dispersibility of MMT particles in the polymer matrix was investigated by using optical microscopy (OM) and scanning electron microscopy (SEM) for those unextracted samples. It was found that almost complete hybrids were obtained when the styrene (ST)–acrylonitryl (AN) comonomer was emulsion polymerized in the presence of Na⁺–MMT, yielding both better miscibility and intercalation capability. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2811–2819, 1999     

Copolymerization of methyl methacrylate and allyl acetate Part I. Rate of reaction

Free radical bulk copolymerization of methyl methacrylate (MMA) and allyl acetate (AAc) has been investigated using electron spin resonance (ESR) and FT–near infrared (FTNIR) spectroscopy. Data are used to evaluate the rate constants. The mole fraction of AAc plays an important role in the copolymerization of these two monomers. AAc not only delays the Trommsdorff effect but also increases the onset of percentage total conversion at which the Trommsdorff region begins. With AAc fraction 0.5 and higher, no Trommsdorff effect was observed. Inclusion of AAc into copolymer structure mainly occurs in the Trommsdorf region or when the AAc fraction in the comonomer feed is dominant. This is associated with a drop in the concentration of propagating radicals. However, ESR spectra indicate that the MMA propagating radical is predominant during the reaction. In the comonomer mixtures where a Trommsdorff region can be observed, the addition of AAc does not produce any significant change in k_p and k_t in the steady state region. Major changes in k_p and k_t are observed after the gel point and glassy state, respectively. © 2001 Society of Chemical Industry     

Rheological properties of high molecular weight (HMW) syndiotactic poly(vinyl alcohol) (PVA)/HMW atactic PVA blend solutions

To identify the effect of blend ratios of syndiotacticity‐rich poly(vinyl alcohol) (s‐PVA)/atactic PVA (a‐PVA) having similar number‐average degrees of polymerization (P_n)s of 4000 and degrees of saponification (DS)s of 99.9% on the rheological properties of s‐PVA/a‐PVA/water solutions, water‐soluble s‐PVA and a‐PVA with different syndiotactic diad contents of 58.5 and 54.0%, respectively, were prepared by bulk copolymerization of vinyl pivalate and vinyl acetate (VAc) and solution polymerization of VAc, followed by saponifying the corresponding copoly(vinyl pivalate/vinyl acetate) and poly(vinyl acetate). The blend ratios played a significant role in rheological behavior. Over the frequency range of 10^?1–10² rad/s, s‐PVA/a‐PVA blend solutions with larger s‐PVA content show more shear thinning at similar (P_n)s and (DS)s of polymer, suggesting that PVA molecules are more readily oriented as s‐PVA content increases. Yield stress is higher for s‐PVA/a‐PVA blend solutions with larger s‐PVA content at similar (P_n)s and (DS)s of polymer. This indicates that more domains with internal order are produced at larger s‐PVA content in s‐PVA/a‐PVA blend solutions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3934–3939, 2006     

Radical polymerization behavior of dimethyl vinylphosphonate: Homopolymerization and copolymerization with trimethoxyvinylsilane

Dialkyl vinylphosphonates such as dimethyl vinylphosphonate (DMVP) and diethyl vinylphosphonate were quantitatively polymerized with dicumyl peroxide (DCPO) at 130°C in bulk. The polymerization of DMVP with DCPO was kinetically studied in bulk by fourier transform near‐infrared spectroscopy (FTNIR) and electron spin resonance (ESR) spectroscopy. The initial polymerization rate (R_p) was given by R_p = k[DCPO]^0.5[DMVP]^1.0 at 110°C, being the same as that of the conventional radical polymerization involving bimolecular termination. The overall activation energy of the polymerization was estimated to be 26.2 kcal/mol. The polymerization system involved ESR‐observable propagating polymer radicals under the practical polymerization conditions. ESR‐determined rate constants of propagation (k_p) and termination (k_t) were k_p = 19 L/mol s and k_t = 5.8 × 10³ L/mol s at 110°C, respectively. The molecular weight of the resultant poly(DMVP)s was low (M_n = 3.4 ? 3.5 × 10³), because of the high chain transfer constant (C_m = 3.9 × 10^?2 at 110°C) to the monomer. DMVP (M₁) showed a considerably high reactivity in the radical copolymerization with trimethoxyvinylsilane (TMVS) (M₂) at 110°C in bulk, giving an inorganic component‐containing functional copolymer with potential flame‐retardant properties; r₁ = 1.6 and r₂ = 0. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Copolymerization of styrene with N‐phenyl maleimide in the presence of montmorillonite

The copolymerization of styrene with N‐phenyl maleimide in the presence of organomodified montmorillonite or Na⁺ montmorillonite was investigated. The conversion of the monomer was determined dilatometrically or gravimetrically. The copolymerization rate was accelerated and the polymerization activation energy in bulk and solution copolymerization decreased in the presence of montmorillonite. The tendency of alter‐copolymerization was enhanced for bulk and solution polymerization, but not affected for emulsion polymerization, by the addition of organomodified montmorillonite or Na⁺ montmorillonite. X‐ray diffraction studies showed that the methods of emulsion and bulk intercalative polymerization were more appropriate techniques for preparing nanocomposites with good dispersibility of clay. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1932–1937, 2005     

Dispersion copolymerization of acrylonitrile‐vinyl acetate in supercritical carbon dioxide

Dispersion copolymerization of acrylonitrile‐vinyl acetate (AN‐VAc) had been successfully performed in supercritical carbon dioxide (ScCO₂) with 2,2‐azobisisobutyronitrile (AIBN) as a initiator and a series of lipophilic/CO₂‐philic diblock copolymers, such as poly(styrene‐r‐acrylonitrile)‐b‐poly(1,1,2,2‐tetrahydroperfluorooctyl methacrylate) (PSAN‐b‐PFOMA), as steric stabilizers. In dispersion copolymerization, poly(acrylonitrile‐r‐vinyl acetate) (PAVAc) was emulsified in ScCO₂ effectively using PSAN‐b‐PFOMA as a stabilizer. Compared with the precipitation polymerization (absence of stabilizer), the products prepared by dispersion polymerization possessed of higher yield and higher molecular weight. In addition, the particle morphology of precipitation polymerization was irregular, but the particle morphology of dispersion polymerization was uniform spherical particles. In this study, the effects of the initial concentrations of monomer and the stabilizer and the initiator, and the reaction pressure on the yield and the molecular weight and the resulting size and particle morphology of the colloidal particles were investigated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5640–5648, 2006     

Free radical copolymerization behavior of vinyl acetate with butyl acrylate in the presence of GeCl4 and BCl3

No alternating copolymers of vinyl acetate (VAc) and butyl acrylate (BA) were obtained by free radical copolymerization in the presence of GeCl₄ and BCl₃ (compared with the acrylic acid–vinyl acetate copolymerization system). By ultraviolet spectral analysis, it was concluded that both BCl₃ and GeCl₄ can form complexes with butyl acrylate. The BA–BCl₃ complex constants were determined by ¹H NMR; K_B=33·2 (25°C). The reason for the gel formation in the BA–Vac–BCl₃ copolymerization system was discussed. When vinyl acetate reacted with BCl₃, cationic polymerization probably occurred. A white gel product probably resulted from the polymerization of the BA–BCl₃ complex. © 1998 SCI.