100 Gb/s optical time-division multiplexed networks

We present ultrafast slotted optical time-division multiplexed networks as a viable means of implementing a highly capable next-generation all-optical packet-switched network. Such a network is capable of providing simple network management, the ability to support variable quality-of-service, self-routing of packets, scalability in the number of users, and the use of digital regeneration, buffering, and encryption. We review all-optical switch and Boolean logic gate implementations using an ultrafast nonlinear interferometers (UNIs) that are capable of stable, pattern-independent operation at speeds in excess of 100 Gb/s. We expand the capability provided by the UNI beyond switching and logic demonstrations to include system-level functions such as packet synchronization, address comparison, and rate conversion. We use these advanced all-optical signal processing capabilities to demonstrate a slotted OTDM multiaccess network testbed operating at 112.5 Gb/s line rates with inherent scalability in the number of users and system line rates. We also report on long-haul propagation of short optical pulses in fiber and all-optical 3R regeneration as a viable cost-effective means of extending the long-haul distance of our OTDM network to distances much greater than 100 km.     

All-Optical Switches in Optical Time-Division Multiplexing Technology: Theory, Experience and Application

All-Optical Switches in Optical Time-Division Multiplexing Technology: Theory, Experience and Application     

Field Experiments With a Grooming Switch for OTDM Meshed Networking

Field experiments of 42.7/128.1 Gb/s wavelength-division multiplexed, optical time-division multiplexed (WDM-OTDM) transmultiplexing and all-optical dual-wavelength regeneration at the OTDM rate are presented in this paper. By using the asynchronous retiming scheme, we achieve error-free bufferless data grooming with time-slot interchange capability for OTDM meshed networking. We demonstrate excellent performance from the system, discuss scalability, applicability, and the potential reach of the asynchronous retiming scheme for transparent OTDM-domain interconnection.      

On the limits of electronic ATM switching

This article discusses the principal advantages and limitations of electronic switching in asynchronous transfer mode (ATM) networks. Key design parameters of ATM switch implementations are defined, and their relationships with respect to performance, complexity, and cost are modeled and discussed. Design and implementation experience is reported on a very high-performance four-input, four-output ATM switch that has been designed as part of the DARPA-sponsored “Thunder and Lightning” project at the University of California, Santa Barbara. This research project is focused on the design and prototype demonstration of ATM links and electronic switches operating at 40 Gb/s per link (TDM), with potential scalability to 100 Gb/s. Such aggressive link rates are near the implementation limits for electronic ATM switches; they place severe requirements on switch architecture, particularly the buffering scheme     

Crosspoint switch equipped with an interface for serial opticalinterconnection

A crosspoint switch was developed that has an interface for serial optical interconnection. By using optoelectronic devices, cascaded switching was achieved through serial optical interconnection up to a bit rate of 10 Gb/s     

A Hybrid OTDM Scheme With Enhanced Demultiplexing Performance

We propose a novel hybrid optical time-division multiplexing (OTDM) approach, which contains hybrid modulation formats of return-to-zero on-off keying and return-to-zero differential-phase-shift keying, and investigate its demultiplexing performance. Compared with conventional OTDM with homogenous modulation format, the target demultiplexed channel in a hybrid OTDM signal suffers from much less degradation due to the possible crosstalk from the adjacent channels. We experimentally demonstrate 84.88- to 10.61-Gb/s hybrid OTDM demultiplexing and achieve a relatively wide switching window, which cannot be realized by using the conventional OTDM. Moreover, experimental results at 42.44 Gb/s show a much larger tolerance against timing misalignment in demultiplexing, which further validates the improved demultiplexing performance by using the hybrid OTDM scheme.     

Terahipas: a modular and expandable terabit/second hierarchicallymultiplexing photonic ATM switch architecture

A terabit/second hierarchically multiplexing photonic asynchronous transfer mode (ATM) switch network architecture, called Terahipas, is proposed. It combines the advantages of photonics (a large bandwidth for transport of cells) and electronics (advanced logical functions for controlling, processing, and routing). It uses a hierarchical photonic multiplexing structure in which several tens of channels with a relatively low bit rate, say 2.4 Gb/s, are first time-multiplexed on an optical highway by shrinking the interval between optical pulses, then a number of optical highways are wavelength-multiplexed (or space-division multiplexed). As a result, the switch capacity can be expanded from the order of 100 Gb/s to the order of 10 Tb/s in a modular fashion. A new implementation scheme for cell buffering is used for eliminating the bottleneck when receiving and storing concurrent optical cells at bit rates as high as 100 Gb/s. This new architecture can serve as the basis of a modular, expandable, high-performance ATM switching system for future broad band integrated service digital networks (B-ISDN's)     

Comparison of interferometric all-optical switches fordemultiplexing applications in high-speed OTDM systems

We have investigated three interferometric all-optical switches based on cross-phase modulation (XPM) in semiconductor optical amplifiers (SOAs), the semiconductor laser amplifier in a loop mirror (SLALOM) switch, the Mach-Zehnder interferometer (MZI) switch, and the ultrafast nonlinear interferometer (UNI) switch. Switching windows with different widths are measured under similar conditions for all three switching configurations. We introduce the integrated contrast ratio (ICR) as a measure to evaluate the performance of a switch from switching windows. Using the ICR, the switches are compared and their application is discussed as demultiplexer in optical time division multiplexing (OTDM) systems for data rates of 40, 80, and 160 Gb/s     

Optical time division multiplexing: systems and networks

The recent advances in optical time division multiplexed (OTDM) systems and components research show the technique to be highly suited to the generation and transmission of high capacity data on a single optical carrier. This approach uses a single wavelength to carry capacities of at least 40 Gb/s. Such systems are based on a clock frequency and tributary data rates which are easily accessible using electronic components. Short optical pulses are used in a return-to-zero data transmission format with temporal interleaving to map a number of optical data channels into a single electronic clock cycle. It is an approach that can be used to achieve extremely high data-rate bit interleaved systems. This article summarizes the developments in this field and outlines a possible methodology to evolve transport networks to encompass the potential that both WDM and OTDM have to offer     

Bidirectional four-wave mixing in semiconductor optical amplifiers:theory and experiment

Bidirectional four wave mixing (FWM) is investigated in a bulk semiconductor optical amplifier (SOA) for dispersion compensation and for the clear/drop functionality in optical time division multiplexed (OTDM) systems. Good performance for bidirectional midspan spectral inversion (MSSI) is theoretically predicted for bit rates of 10, 20, and 40 Gb/s and is shown to be in agreement with measurements performed at 10 and 20 Gb/s. Measurements of the clear/drop functionality using the bidirectional technique show excellent performance for a 4×10 Gb/s signal and is again in good agreement with simulations. The clear/drop functionality is also simulated for 4×20 Gb/s and 4×40 Gb/s signals     

对40 Gb/s OTDM系统中光纤光栅色散补偿器进行偏振模色散补偿的研究

改变光纤光栅紫外曝光系统 ,在相位掩模板后插入一个旋转装置 ,使得光纤在制作过程中可以进行某种旋转。通过这种方法制作的光纤光栅偏振模色散减小到平均差分群时延 (DGD)约为 0 2ps,而没加旋转制作的光纤光栅平均DGD约为 18 2 ps。采用两个这种低偏振模色散 (PMD)的光纤布拉格光栅 (FBG) ,成功地在 4 0Gb/s光时分复用 (OTDM)系统中补偿了约 2 0 4 0 ps的色散 ,该系统在经过 12 2km普通单模光纤传输后 ,未发现PMD的影响 ,传输功率代价小于 1 4dB。     

A fast packet switch for the integrated services backbone network

With the projected growth in demand for bandwidth and telecommunication services will come the requirement for a multiservice backbone network of far greater efficiency, capacity, and flexibility than ISDN (integrated-services digital network) is able to satisfy. This class of network has been termed the broadband ISDN, and the design of the switching nodes of such a network is the subject of much research. The author investigates one possible solution. The design and performance, for multiservice traffic, is presented for a fast packet switch based on a nonbuffered, multistage interconnection network. It is shown that for an implementation in current CMOS technology, operating at 50 MHz, switches with a total traffic capacity of up to 150 Gb/s can be constructed. Furthermore, if the reserved service traffic load is limited on each input port to a maximum of 80% of switch port saturation, then a maximum delay across the switch of on the order of 100 μs can be guaranteed, for 99% of the reserved service traffic, regardless of the unreserved service traffic load     

System-Performance Analysis of Optimized Gain-Switched Pulse Source Employed in 40- and 80-Gb/s OTDM Systems

The development of ultrashort optical pulse sources, exhibiting excellent temporal and spectral profiles, will play a crucial role in the performance of future optical time division multiplexed (OTDM) systems. In this paper, we demonstrate the difference in performance in 40- and 80-Gb/s OTDM systems between optical pulse sources based on a gain-switched laser whose pulses are compressed by a nonlinearly and linearly chirped fiber Bragg grating. The results achieved show that nonlinear chirp in the wings of the pulse leads to temporal pedestals formed on either side of the pulse when using the linearly chirped grating, whereas with the nonlinearly chirped grating, pedestals are essentially eliminated. In an OTDM system, these pedestals cause coherent interaction between neighboring channels, resulting in intensity fluctuations that lead to a power penalty of 1.5 dB (40 Gb/s) and 3.5 dB (80 Gb/s) in comparison to the case where the nonlinearly chirped grating is used. Simulations carried out with the aid of Virtual Photonics Inc. verify the results achieved.     

64-Gb/s highly reliable network switch (RHiNET-2/SW) using paralleloptical interconnection

RHiNET-2/SW is a network switch that enables high-performance optical network based parallel computing system in a distributed environment. The switch used in such a computing system must provide high-speed, low-latency packet switching with high reliability. Our switch allows high-speed 8-Gb/s/port optical data transmission over a distance of up to 100 m, and the aggregate throughput is 64 Gb/s. In RHiNET-2/SW, eight pairs of 800-Mb/s×12-channel optical interconnection modules and a one-chip CMOS ASIC switch LSI (a 784-pin BGA package) are mounted on a single compact board. To enable high-performance parallel computing, this switch must provide high-speed, highly reliable node-to-node data transmission. To evaluate the reliability of the switch, we measured the bit error rate (BER) and skew between the data channels. The BER of the signal transmission through one I/O port was better than 10^-11 at a data rate of 800 Mb/s ×10 b with a large timing-budget margin (870 ps) and skew of less than 140 ps. This shows that RHiNET-2/SW can provide high-throughput, highly reliable optical data transmission between the nodes of a network-based parallel computing system     

OTDM add-drop multiplexer based on XPM-induced wavelength shifting in highly nonlinear fiber

In this paper, we study experimentally and numerically simultaneous time-domain add-drop multiplexing for high-speed optical time-division multiplexing (OTDM) networks based on cross-phase-modulation (XPM)-induced wavelength shifting in a 50-m highly nonlinear fiber. This scheme needs only a single-channel clock rate and does not alter the input signal wavelength. Simultaneous add and drop operations at 80 Gb/s have been demonstrated experimentally with less than 1-dB power penalty for the dropped channel and no distinct bit-error-rate (BER) degradation for the added channel. Numerical simulations show that the experimental results are only limited by the available signal pulsewidth, and simultaneous add-drop multiplexing at 160-Gb/s or higher bit rates is possible with this scheme by employing control and signal pulses with proper pulsewidths.     

A 1.8 Gb/s GaAs optoelectronic universal switch LSI withmonolithically integrated photodetector and laser driver

A high-speed monolithic optical interface switch LSI is developed using a GaAs MSM photodetector and large-scale integrated electric circuits. This LSI operates universally as a 1.8 Gb/s optical-input/optical-output four-channel time-division switch, a 1.8 Gb/s optical-input/electrical-output 1:4 demultiplexer, a 2.0 Gb/s electrical-output 4:1 multiplexer, and a 2.8 Gb/s electrical-input/electrical-output 4×4 space-division switch. It uses a new multistage 2×2 switch block with small hardware and high-speed operation. It can be expanded to a 16×16 optical-input/optical-output time-division switch operating at up to 1.8 Gb/s for broadband-ISDN     

Ultra-high-speed OTDM networks using semiconductor amplifier-basedprocessing nodes

The use of semiconductor amplifiers in high speed communications systems is reviewed. Processing of signals at 10 Gb/s in a 40-Gb/s OTDM network is demonstrated using nonlinear loop mirror configurations, and mode locked ring lasers. Particular attention is paid to the role of carrier density modulation, long believed to be a detrimental effect, and its useful exploitation     

4×10Gb/s OTDM复用与解复用结构优化技术研究

基于40Gb/s OTDM复用结构,利用电吸收调制器(EAM)及时钟提取模块组成的解复用模型,实现了10GHz时钟分量的提取和信号的解复用.针对OTDM复用后信号的非等幅现象以及对应频谱中含有10GHz、20GHz等其他频谱分量的情况,进行了仿真分析及讨论.同时通过实验对不同的时钟提取与解复用结构提取出的时钟信号的质量进行了对比,优化了解复用结构,得到了抖动更小的帧时钟信号.     

Injection-locked Fabry-Pe/spl acute/rot laser with electronic feedback for clock recovery from high-speed OTDM signals

We demonstrate the use of an injection-locked Fabry-Pe/spl acute/rot laser diode with electronic feedback for base-rate clock recovery in N/spl times/10 Gb/s optical time-division-multiplexing (OTDM) systems. Injection-locking enhances the resonance frequency of the laser and the electrical feedback achieves strong resonance at the base-rate frequency of the injected data streams, enabling ultrastable electrical clock signal generation at the base rate of 10 GHz. Experimental demonstrations for clock recovery at 10 GHz from 40-Gb/s OTDM data streams and 4-1 demultiplexing of the data using the extracted clock after fiber transmission is presented. The timing jitter measured in the recovered electrical clock is less than 0.25 ps.     

Cascadability of large-scale 3-D MEMS-based low-loss photonic cross-connects

The performance of cascaded low-loss (<3.5 dB) 256/spl times/256 three-dimensional microelectromechanical system (3-D MEMS) photonic cross-connects (PXCs) is experimentally investigated in a recirculating loop. After 60 transitions through the PXC, a power penalty of 1.7 dB is observed, which is attributed to the accumulation of the low polarization-dependent loss in the optical switch. The use of 3-D MEMS PXCs as a wavelength-selective switch (WSPXC) for transparent all-optical networks is also demonstrated. Measured Q-factors for all 16 100-GHz-spaced wavelengths at 10 Gb/s over eight spans of 75-km single-mode fiber and eight transitions through the WSPXC nodes are better than 17 dB.