Adhesion of polyethylene plates photografted with methacrylic acid and acrylic acid with enzymatically modified chitosan solutions and X‐ray photoelectron spectroscopy analysis of failed surfaces

An investigation was carried out on the application of dilute chitosan solutions modified by a tyrosinase‐catalyzed reaction with 3,4‐dihydroxyphenetylamine (dopamine) to the adhesion of low‐density polyethylene (LDPE) and high‐density polyethylene (HDPE) plates photografted with carboxyl‐group‐containing hydrophilic monomers, such as methacrylic acid (MAA) and acrylic acid (AA). In the case where photografting was carried out at lower monomer concentrations or at lower temperatures, the adhesive strength sharply increased with lower grafted amounts. A sharp increase in the adhesive strength was found to be due to the formation of shorter grafted polymer chains at lower monomer concentrations and/or the restriction of the location of grafting to the outer surface region at lower temperatures. In addition, the adhesive strength also sharply increased at even lower grafted amounts for photografting onto the HDPE plates and/or that of AA because the location of grafting was restricted to the outer surface region. For the AA‐grafted LDPE and HDPE plates, substrate breaking was observed. This was attributed to the coverage of the substrate surfaces with grafted poly(acrylic acid) chains at lower grafted amounts and a high water absorptivity of the grafted layer. X‐ray photoelectron spectroscopy (XPS) analysis of the grafted LDPE plates incubated in a dopamine solution containing tyrosinase suggested that the increase in the adhesive strength was caused by the penetration of enzymatically modified chitosan solutions in the grafted layers and the subsequent reaction of quinone derivatives enzymatically generated with grafted polymer chains. In addition, the surface analysis of the failed surfaces by XPS showed that as the adhesive strength increased, the location of failure was shifted from the interface between the layers mixed with enzymatically modified chitosan materials and grafted polymer chains to the inside the grafted layer containing enzymatically modified chitosan materials. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Adhesion of grafted polypropylene plates with enzymatically modified chitosan solutions and analysis of failed surfaces by X‐ray photoelectron spectroscopy

In this study, hydrophilic monomers were photografted onto the PP plates at different monomer concentrations and temperatures, and grafted PP plates were bonded with enzymatically modified chitosan solutions. Their adhesive strength properties were discussed in relation to the grafting conditions and hydrophilic properties such as wettability and water‐absorptivity. In addition, the location of failure was investigated by X‐ray photoelectron spectroscopy analysis of failed surfaces. Wettability of the grafted PP plates except for the PP grafted with acrylic acid (PP‐g‐PAA) plates remained constant above the grafted amounts at which the PP surfaces were fully covered with grafted polymer chains. On the other hand, wettability of the PP‐g‐PAA plates passed through the maximum value and then gradually decreased with the grafted amount probably because of the aggregation of grafted PAA chains. Water‐absorptivity of the grafted layers formed at lower monomer concentrations or temperatures sharply increased at lower grafted amounts. The adhesive strength increased with an increase in the grafted amount and substrate breaking was observed for PP‐g‐PAA plates because enzymatically modified chitosan solutions were successfully penetrated in the grafted layers and quinone derivatives reacted with carboxy groups of grafted PAA chains. Failure occurred in the layers composed of grafted PAA chains and components containing in enzymatically modified chitosan solutions and the location was shifted to the inside of grafted layer, as the grafted amount increased. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1369‐1376, 2013     

Improvement in adhesive‐free adhesion by the use of electrostatic interactions between polymer chains grafted onto polyethylene plates

The tensile shear adhesive‐free adhesion properties induced by electrostatic interactions between poly(acrylic acid) (PAA) and poly[2‐(dimethylamino)ethyl methacrylate] (PDMAEMA) chains grafted onto polyethylene (PE) with low‐density (LDPE) or high‐density (HDPE) plates were studied. PAA‐ or PDMAEMA‐grafted PE plates were immersed in a HCl or NaOH solution or water for 24 h, and their electrostatic properties were changed before they were overlapped with each other and heat‐pressed. The breaking of the substrate between the two plates with water‐swollen grafted layers was observed in the low range of grafted amounts in comparison with immersion in the acidic and basic solutions. The ability of the two plates with grafted polymer chains swollen in water to strongly bond with each other was a result of electrostatic interactions formed by positively charged PDMAEMA and negatively charged PAA chains. The breaking of the substrate in the case of adhesive‐free adhesion between quaternized PDMAEMA‐grafted and PAA‐grafted PE plates immersed in the basic solution occurred with lower grafted amounts of PAA. This came from the strong attractive force between dissociated anionic PAA chains and quaternized cationic PDMAEMA chains in the basic solution. In addition, the adhesive‐free adhesion strength of HDPE plates with the same grafted polymer chains encountered the breaking of the substrate with lower grafted amounts than that of LDPE plates. It was concluded that the grafting of polymer chains onto HDPE plates with high crystallinity was considerably restricted to the outer surface regions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2632–2638, 2006     

Adhesion of ultrahigh molecular weight polyethylene plates photografted with hydrophilic monomers and evaluation of failure location by X‐ray photoelectron spectroscopy

In this study, methacrylic acid (MAA) and acrylic acid (AA) were photografted onto the ultrahigh molecular weight polyethylene (UHMWPE) plates at different monomer concentrations and temperatures, and the grafted UHMWPE plates were bonded with aqueous polyvinyl alcohol (PVA) solutions. The tensile shear adhesive strength of both grafted UHMWPE plates was also discussed in relation to wettability and water absorptivity. The location of failure was also estimated by X‐ray photoelectron spectroscopy (XPS). Wettability of the MAA‐grafted UHMWPE plates became constant, when the UHMWPE surface was fully covered with grafted PMAA chains. Conversely, wettability of the AA‐grafted UHMWPE plates passed through the maximum value and then gradually decreased against the grafted amount probably due to aggregation of grafted PAA chains. Water absorptivity of the grafted layers formed at lower monomer concentrations or temperatures sharply increased at lower grafted amounts. The adhesive strength increased with the grafted amount and substrate breaking was observed at higher grafted amounts, indicating that a main factor to increase the adhesive strength is the formation of a grafted layer by shorter grafted polymer chains and/or the restriction of the location of photografting to the outer surface region. In addition, surface analysis by XPS showed that failure occurred in the boundary between the layer composed of grafted polymer chains and PVA chains and the ungrafted layer at a low adhesive strength, and the location of failure was shifted to the grafted layer containing PVA chains at the grafted amount increased. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40133.     

Application of chitosan solutions gelled by melB tyrosinase to water‐resistant adhesives

An investigation was undertaken on the application of dilute chitosan solutions gelled by melB tyrosinase‐catalyzed reaction with 3,4‐dihydroxyphenethylamine (dopamine). The tyrosinase‐catalyzed reaction with dopamine conferred water‐resistant adhesive properties to the semi‐dilute chitosan solutions. The viscosity of the chitosan solutions highly increased by the tyrosinase‐catalyzed quinone conversion and the subsequent nonenzymatic reactions of o‐quinones with amino groups of the chitosan chains. The viscosity of chitosan solutions highly increased in shorter reaction times by addition of melB tyrosinase. Therefore, in this study, the gelation of a chitosan solution was carried out without poly(ethylene glycol) (PEG), which was added for the gelation of chitosan solutions using mushroom tyrosinase. The highly viscous, gel‐like modified chitosan materials were allowed to spread onto the surfaces of the glass slides, which were tightly lapped together and were held under water. Tensile shear adhesive strength of over 400 kPa was observed for the modified chitosan samples. An increase in either amino group concentration of the chitosan solutions or molecular mass of the chitosan samples used effectively led to an increase in adhesive strength of the glass slides. Adhesive strength obtained by chitosan materials gelled enzymatically was higher than that obtained by a chitosan gel prepared with glutaraldehyde as a chemical crosslinking agent. In addition, the use of melB tyrosinase led to a sharp increase in adhesive strength in shorter reaction times without other additives such as PEG. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Improvement of autohesive and adhesive properties of polyethylene plates by photografting with glycidyl methacrylate

Glycidyl methacrylate (GMA) was photografted with the low‐ and high‐density polyethylene (LDPE and HDPE) plates to provide their surfaces with autohesive and adhesive properties. The chemical composition and wettability of the GMA‐grafted LDPE and HDPE (LDPE‐g‐PGMA and HDPE‐g‐PGMA) plates remained constant above full coverage of the surfaces with grafted PGMA chains. Autohesive strength obtained with 1,4‐dioxane as a good solvent of PGMA increased with an increase in the grafted amount and substrate breaking was observed at the grafted amount of 117 μmol/cm². The grafted amount at substrate breaking was decreased by increasing the temperature and load during heat pressing. Adhesive strength was effectively enhanced by use of multi‐functional amine compounds because of the increase in the reaction between primary or secondary amine groups and epoxy groups appended to the grafted PGMA chains. In addition, the decrease in the amine compound concentration and the increase in the number of amino groups in the amine compounds used led to the decrease in the grafted amounts at substrate breaking. Substrate breaking occurred at lower grafted amounts for the HDPE‐g‐PGMA plates than for the LDPE‐g‐PGMA plates because the location of the photografting was restricted to the outer surface region for the HDPE plate. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 493–500, 2007     

Estimation of surface properties of grafted layers formed on low- and high-density polyethylene plates by photografting of methacrylic acid and acrylic acid at different monomer concentrations and temperatures

An investigation was carried out on estimation of hydrophilicity, wettability and water-absorptivity, and surface analysis by X-ray photoelectron spectroscopy of the low- and high-density polyethylene (LDPE and HDPE) plates photografted with methacrylic acid (MAA) and acrylic acid (AA) at different monomer concentrations or temperatures. Wettability of the MAA-grafted LDPE and HDPE plates increased with grafted amounts, and became constant when the substrate surfaces were fully covered with the grafted polymer chains. On the other hand, for the AA-grafted LDPE and HDPE plates, wettability had the maximum value, and then gradually decreased against the grafted amount probably due to aggregation of grafted PAA chains, although the surfaces were covered with grafted PAA chains at lower grafted amounts compared with grafted PMAA chains. Water-absorptivity sharply increased at lower grafted amounts due to formation of shorter grafted polymer chains for photografting at lower monomer concentrations or due to restriction of the location of grafting to the outer surface region for photografting at lower temperatures. Therefore, for photograftings of AA or onto the HDPE plates, the substrate surfaces were covered with grafted polymer chains and the grafted layers formed possessed higher water-absorptivity at lower grafted amounts. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Application of enzymatically gelled chitosan solutions to water‐resistant adhesives

An investigation was undertaken on the application of dilute chitosan solutions gelled by tyrosinase‐catalyzed reaction with 3,4‐dihydroxyphenethylamine (dopamine). The tyrosinase‐catalyzed reaction with dopamine conferred water‐resistant adhesive properties to the semidilute chitosan solutions. The viscosity of the chitosan solutions increased highly by the tyrosinase‐catalyzed reaction and the subsequent reactions between o‐quinone compounds and chitosan. These highly viscous, gel‐like modified chitosan materials were allowed to spread onto the surfaces of the glass slides, which were tightly lapped together and held them in water. Tensile shear adhesive strength of over 400 kPa was observed for the modified chitosan samples. The increase in the amino group concentration of the chitosan solutions and the molecular mass of the chitosan used effectively led to the increase in adhesive strength of the glass slides. In addition, in the case where the chitosan solution was gelled by the enzymatic reaction with dopamine in the presence of poly(ethylene glycol), adhesive strength sharply increased at shorter reaction times concomitantly with the increase in the viscosity of the chitosan solutions because the tyrosinase activity effectively was retained by poly(ethylene glycol). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1818–1827, 2007     

Bioinspired and biocompatible adhesive coatings using poly(acrylic acid)‐grafted dopamine

Poly(acrylic acid) (PAA) was grafted with dopamine to increase its adhesion force to metal surface. Nitinol plate surfaces were then modified by coating with PAA‐g‐dopamine. To synthesize PAA‐g‐dopamine, PAA was first activated by dicyclohexylcarbodiimide and N‐hydroxysuccinimide (NHS) to form PAA–NHS. Dopamine was then copolymerized with PAA–NHS in an aqueous medium at pH 8.5. We propose to increase the adhesion of adhesive PAA‐g‐dopamine on nitinol to improve its durability. In this article, we studied wettability, surface elemental composition, and surface morphology. Biocompatibility was also assessed by L929 fibroblast cells in vitro. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Retention and reusability of trypsin activity by covalent immobilization onto grafted polyethylene plates

This study investigated the activity of trypsin that had been covalently immobilized onto acrylic acid (AA)– and methacrylic acid (MAA)–grafted polyethylene (PE) plates—PE–g–PAA and PE–g–PMAA—using a water‐soluble carbodiimide as a coupling agent, as a function of the immobilized amount, the grafted amount, the pH value on immobilization, and the pH value and temperature at the activity measurement. The activity of trypsin immobilized on the PE–g–PAA plates at pH 6.0 decreased with an increase in the immobilized amount because of the crowding of trypsin molecules in the vicinity of the surfaces of the grafted PAA layers. The increase in the grafted amount resulted in a decrease in the activity of immobilized trypsin because of a decrease in the diffusivity of BANA molecules caused by the formation of dense grafted PAA layers for the PE–g–PAA plates and led to the increased activity because of the increase in the hydrophilicity of the whole grafted layers for the PE–g–PMAA plates. The activity of trypsin immobilized on the PE–g–PAA and PE–g–PMAA plates at pH 6 increased with an increase in the pH value, probably because of the expansion of trypsin‐carrying grafted PAA and PMAA chains and the increased diffusivity of Nα‐benzoyl‐DL ‐arginine‐nitroanilide hydrochloride molecules in the grafted layers. The optimum temperature of the activity of immobilized trypsin shifted to 50°C from 30°C for native trypsin. Immobilized trypsin was reusable without any denaturation and isolation at temperatures ranging from 20°C to 60°C and pH values ranging from 6 to 10. Trypsin immobilized on a PE–g–PAA plate had 95% of the remaining activity in relation to native trypsin at 30°C after preservation in a pH 7.8 buffer at 4°C over 6 months. These results made clear that alkaline and thermal stability, reusability, and storage stability can be much improved by the covalent coupling of trypsin on PE–g–PAA and PE–g–PMAA plates. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3574–3581, 2003     

Autohesive properties of polyolefins photografted with hydrophilic monomers

In an attempt to provide polyolefins such as low‐ and high‐density polyethylene and polypropylene with autohesive properties, hydrophilic monomers such as methacrylic acid (MAA), acrylic acid (AA), and 2‐(dimethylamino)ethyl methacrylate (DMAEMA) were photografted onto their surfaces. The wettabilities of the grafted plates stayed constant above full coverage of the substrate surfaces with grafted polymer chains, except for the AA‐grafted plates. The amount of absorbed water for the grafted layers formed increased with an increase in the number of grafted polymer chains. The autohesive strength increased with an increase in the wettability and water absorptivity of the grafted plates as well as the temperature and load on heat pressing. For all grafted plates substrate breaking at autohesive strength measurements was observed for grafted amounts 2–3 times as much as those at adhesive strength measurements. The substrate breakings for the HDPE and PP plates photografted with AA and DMAEMA at adhesive strength measurements were observed at lower grafted amounts compared with those photografted with MAA. This study has made it clear that the photografting of hydrophilic monomers onto polyolefin materials can markedly enhance autohesivity without any adhesives as well as the adhesivity for high grafted amounts. Therefore, polyolefin materials with improved autohesivity and adhesivity can be widely applied in adhesive fields, including for novel uses. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 2244–2252, 2003     

Hydrophilic and adhesive properties of methacrylic acid-grafted polyethylene plates

Methacrylic acid (MAA) was grafted onto polyethylene (PE) surfaces by simultaneous irradiation with UV rays in the liquid phase to estimate hydrophilic and mechanical properties for MAA-grafted PE plates. The amount of grafted MAA increased sigmoidally with UV irradiation time, and the higher grafted amount was obtained at higher monomer concentrations. With an increase in grafting of MAA, the wettabilities from the contact angles of water were enhanced and the refractive indices from the ellipsometry decreased. Though the contact angles remained constant above the grafted amount of 0.02 mmol/cm², the refractive indices approached the value of PMAA around 0.009 mmol/cm², indicating that the PE surfaces were fully covered with grafted PMAA chains. Then, at a fixed grafted amount, the grafted layer can absorb more water and the grafted PE plates possessed higher tensile shear adhesive strength, in case grafting was carried out at lower monomer concentrations. Surface properties depended on the density of carboxyl group at the surfaces of grafted layers, whereas adhesive properties depended on the structural properties of grafted chains as well as on the density of carboxyl group of the whole grafted layers.     

PP/LDPE blends produced by reactive processing. I. Grafting efficiency and rheological and high‐elastic properties of [PP/LDPE]‐g‐IA melts

Itaconic acid (IA) was grafted onto polypropylene/low‐density polyethylene (PP/LDPE) blends. The ratio of polymeric components was varied from 100 : 0 to 0 : 100. The effect of the variation in the ratios of the components on grafting efficiency and concomitant side processes was studied. Grafting of IA (1 wt %) was initiated by 2,5‐dimethyl‐2,5‐di(tert‐butyl peroxy)‐hexane (0.3 wt %) and was carried out in an extruder reactor equipped with a dynamic mixer. An increase in the PP content of the blend led to a lower yield of the grafted product. With low concentrations of LDPE in the blend (up to 25 wt %), grafting efficiency was observed to increase, and this increase was greater in comparison with the additive rule. Between 25 and 99 wt % of LDPE in the blend, grafting efficiency rose monotonically with LDPE concentration. At or below an LDPE content of 25 wt %, the melt flow index (MFI) of [PP/LDPE]‐g‐IA would increase unlike with PP‐g‐IA systems. But a small quantity of PP (below 25 wt %) in the [PP/LDPE]‐g‐IA blends would result in a decreased MFI unlike with LDPE‐g‐IA. The dependence of swell index and melt strength on the ratio of polymeric components in [PP/LDPE]‐g‐IA blends also was investigated. ©2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5095–5104, 2006     

Mechanical and thermal properties of LDPE‐cellulose acetate phthalate blends—Effect of maleic anhydride‐grafted LDPE compatibilizer

Biodegradable blends of LDPE and cellulose acetate phthalate have been prepared. Maleic anhydride‐grafted LDPE has been added as a compatibilizer to this blend. The elastic modulus and tensile strength has been considerably improved by adding LDPE‐g‐maleic anhydride compatibilizer. Scanning electron microscope micrographs reflected the observed results for the increase in mechanical properties of the blend. Further blend morphology exhibited a deformed matrix for the compatibilized blends. Thermogravimetric analysis studies showed two‐stage degradation for the blends. Differential scanning calorimetry thermograms showed a loss of crystallinity for the LDPE phase. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and cytocompatibility of chitosan‐modified polylactide

Chitosan‐modified PLA (CMPLA) was fabricated to improve cytocompatibility of polylactide (PLA). PMAA‐grafted PLA (PMAA‐PLA) was obtained through α‐methacrylic acid (MAA) grafted polymerization on PLA surface with photooxidization and UV irradiation. Steady PMAA‐PLA microparticle suspension with an average size as 172.8 ± 3.6 nm and zeta potential as ?95.0 ± 0.6 mV was prepared through solvent volatilization. By static electricity interaction and other interactions between PMAA‐PLA microsparticles and chitosan molecules, CMPLA was obtained. FTIR, XPS, SEM, and zeta potential analyses indicated that CMPLA was modified with chitosan molecules uniformly. Compared with the PLA control, CMPLA adapted to supporting the attachment and proliferation of L929 cells better. The obtained CMPLA was expected to be used as perfect biomaterial for tissue regeneration. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Graft polymerization of methacrylic acid onto polytetrafluoroethylene initiated by alkyllithium/electron‐donating solvents

Graft polymerization of methacrylic acid (MAA) onto polytetrafluoroethylene (PTFE), initiated by the mixed solution of alkyllithium/hexamethylphosphoramide (HMPA) at low temperature, was studied. Using electron spin resonance (ESR), nuclear magnetic resonance, X‐ray photoelectron and vibrational (infrared) spectroscopies, the chemical structure of the grafted poly(methacrylic acid) (PMAA) onto the PTFE (PTFE‐g‐PMAA) was investigated. The grafted PMAA was found to be located deeper than 2.5 nm from the surface of the PTFE. The molecular motion of the PTFE‐g‐PMAA was also studied by means of the temperature‐dependent ESR spectra of the spin‐labeled PTFE‐g‐PMAA. The results suggested that the molecular motion of the grafted PMAA chain was mainly controlled by that of the principal PTFE chain, and the evaluated activation energy was lower for the grafted PMAA chain (e.g., 6.5 kJ/mol at temperature range below 295 K) than that for the PMAA homopolymer (13.2 kJ/mol). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 923–931, 2004     

Effects of polyethylene‐grafted maleic anhydride (PE‐g‐MA) on thermal properties,morphology, and tensile properties of low‐density polyethylene (LDPE) and corn starch blends

The effects of polyethylene‐grafted maleic anhydride (PE‐g‐MA) on the thermal properties, morphology, and tensile properties of blends of low‐density polyethylene (LDPE) and corn starch were studied with a differential scanning calorimeter (DSC), scanning electron microscope (SEM), and Instron Universal Testing Machine, respectively. Corn starch–LDPE blends with different starch content and with or without the addition of PE‐g‐MA were prepared with a lab‐scale twin‐screw extruder. The crystallization temperature of LDPE–corn starch–PE‐g‐MA blends was similar to that of pure LDPE but higher than that of LDPE–corn starch blends. The interfacial properties between corn starch and LDPE were improved after PE‐g‐MA addition, as evidenced by the structure morphology revealed by SEM. The tensile strength and elongation at break of corn starch–LDPE–PE‐g‐MA blends were greater than those of LDPE–corn starch blends, and their differences became more pronounced at higher starch contents. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2904–2911, 2003     

Study on superabsorbent composites. XXI. Synthesis,characterization and swelling behaviors of chitosan‐g‐poly(acrylic acid)/organo‐rectorite nanocomposite superabsorbents

A novel chitosan‐g‐poly(acrylic acid)/organo‐rectorite (CTS‐g‐PAA/OREC) nanocomposite superabsorbent was synthesized by aqueous polymerization using N, N′‐methylenebisacrylamide as a crosslinker and ammonium persulfate as an initiator. Rectorite was organified with four different degree of hexadecyltrimethyl ammonium bromide, and the organification of rectorite was proved by FTIR and XRD. The effect of organification degree of rectorite on water absorbency of CTS‐g‐PAA/OREC with different organo‐rectorite content was investigated. The swelling behaviors in distilled water and various pH solutions were also studied. The results from IR spectroscopy and XRD data show that acrylic acid had been grafted polymerization with chitosan and organo‐rectorite and formed nanocomposite. Introducing organo‐rectorite into the CTS‐g‐PAA polymeric network can improved water absorbency and swelling rate of CTS‐g‐PAA/OREC. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Characterization of bagasse‐rind particleboard bonded with chitosan

The development of high‐performance non‐wood lignocellulosic board without using synthetic adhesives derived from fossils resources is very important for the future. In this study, the characterization of bagasse particleboard bonded with chitosan was investigated. The 4 wt % chitosan‐acetic acid solution was sprayed onto bagasse rind particles at a 2–10 wt % chitosan solid content based on the dry particles. Particleboards with target densities of 0.75 and 0.9 g/cm³ were manufactured using a steam‐injection press. The steam pressure and total pressing time were 1 MPa (180°C) and 7 min, respectively. The addition of 2–4 wt % of chitosan was the most effective in the bending properties. The high‐density board bonded with a 4 wt % addition of chitosan showed a good result in the internal bond strength test. Furthermore, the board had favorable dimensional stability in dilute acetic acid as well as in a cyclic accelerated aging test. Judging from the analysis of bagasse extract‐added chitosan films, it was suggested that chitosan reacted with extract from bagasse during steam‐injection pressing. The reaction seemed to contribute to the board's good resistance to dilute acid. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Effect of poly(acrylic acid)‐g‐PCL microstructure on the mechanical properties of starch/PCL blend compatibilized with poly(acrylic acid)‐g‐PCL

Poly(acrylic acid)‐g‐polycaprolactone (PAA‐g‐PCL) graft copolymer was synthesized and starch/PCL blends compatibilized with PAA‐g‐PCL were prepared. The mechanical properties of the starch/PCL blends compatibilized with various PAA‐g‐PCLs that have different graft degrees and graft lengths were investigated. As the graft degree of the PAA‐g‐PCLs that have the same graft length increased, the modulus and the strength of the blends decreased. However, the elongation at break and the tensile toughness of the blends showed a maximum at a certain graft degree (10.8 mol%) owing to the better compatibilizing effect compared to the low (3.9 mol%) and the high (23.4 mol%) graft degree of PAA‐g‐PCL. It was also found that the modulus and the strength of the blends increased with the increase of graft length of the PAA‐g‐PCLs that have the same graft degree (～11 mol%). However, the blend compatibilized with the short graft length (M.W. of PCL graft: 530) exhibited the highest value of the elongation at break and the tensile toughness. This result is attributed to the self‐crystallization of PAA‐g‐PCL in the blend that has longer PCL grafts.