Ionic conductivity and morphology of semi‐interpenetrating‐type polymer electrolyte entrapping poly(siloxane‐g‐allyl cyanide)

We prepared a semi‐IPN (interpenetrating network)‐type solid polymer electrolyte (SPE) using poly (ethylene glycol)dimethacrylate (PEGDMA) as a polymer matrix containing a monocomb‐type poly(siloxane‐g‐allyl cyanide) and poly(ethylene glycol)dimethylether (PEGDME) for the lithium secondary battery. The poly(siloxane‐g‐allyl cyanide)s were prepared by a hydrosilation reaction of poly (methyl hydrosiloxane) with allyl cyanide and characterized by ¹H NMR and FTIR. The semi‐IPN‐type electrolyte was prepared by thermal curing, and conductivities of samples were measured by impedance spectroscopy using an indium tin oxide (ITO) electrode. The ionic conductivity of the semi‐IPN‐polymer electrolyte was about 1.05 × 10^?5 S cm^?1 with 60 wt % of the poly(siloxane‐g‐allyl cyanide) and 6.96 × 10^?4 S cm^?1 with 50 wt % of the PEGDME and 10 wt % of the poly(siloxane‐g‐allyl cyanide) at 30°C. The SEM morphology of the cross section of the semi‐IPN‐polymer electrolyte film was changed from discontinuous network to continuous network as increasing the PEGDME content and decreasing the poly(siloxane‐g‐allyl cyanide) content. The mechanical stability was also enhanced when increasing the PEGDME content. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Study on superabsorbent composites. XXI. Synthesis,characterization and swelling behaviors of chitosan‐g‐poly(acrylic acid)/organo‐rectorite nanocomposite superabsorbents

A novel chitosan‐g‐poly(acrylic acid)/organo‐rectorite (CTS‐g‐PAA/OREC) nanocomposite superabsorbent was synthesized by aqueous polymerization using N, N′‐methylenebisacrylamide as a crosslinker and ammonium persulfate as an initiator. Rectorite was organified with four different degree of hexadecyltrimethyl ammonium bromide, and the organification of rectorite was proved by FTIR and XRD. The effect of organification degree of rectorite on water absorbency of CTS‐g‐PAA/OREC with different organo‐rectorite content was investigated. The swelling behaviors in distilled water and various pH solutions were also studied. The results from IR spectroscopy and XRD data show that acrylic acid had been grafted polymerization with chitosan and organo‐rectorite and formed nanocomposite. Introducing organo‐rectorite into the CTS‐g‐PAA polymeric network can improved water absorbency and swelling rate of CTS‐g‐PAA/OREC. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and properties of poly(sodium acrylate‐co‐2‐acryloylamino‐2‐methyl‐1‐propanesulfonic acid)/attapulgite as a salt‐resistant superabsorbent composite

A novel salt‐resistant superabsorbent composite was prepared by copolymerization of partially neutralized acrylic acid, 2‐acryloylamino‐2‐methyl‐1‐propanesulfonic acid (AMPS) and attapulgite (APT). To enhance the swelling rate (SR) of the copolymer, sodium bicarbonate was used as a foaming agent in the course of copolymerization. Furthermore, for improving the properties of swollen hydrogel, such as strength, resilience and dispersion, the copolymer was surface‐crosslinked with glycerine and sodium silicate, and then the surface‐crosslinked copolymer was blended with aluminum sulfate and sodium carbonate in post treatment process. The influences of some reaction conditions, such as amount of AMPS, APT, and initiator, and neutralization degree of acrylic acid on water absorbency in 0.9 wt% NaCl aqueous solution both under atmospheric pressure (WA) and load (WA_P, P ≈ 2 × 10³ Pa) were investigated. In addition, the effect of them on SR was also studied. The WA and WA_P of the superabsorbent composite prepared under optimal conditions in 0.9 wt% NaCl aqueous solution were 52 g·g^?1 and 8 g·g^?1, respectively. Besides, the SR was fast, and it could reach 0.393 mL·(g·s)^?1. Moreover, the swollen hydrogel possessed excellent salt resistance, hydrogel resilience and dispersion. POLYM. ENG. SCI., 2009. © 2008 Society of Plastics Engineers     

Comparative delivery of Diltiazem hydrochloride through synthesized polymer: Hydrogel and hydrogel microspheres

In this study, interpenetrating polymer network (IPN) hydrogel based on polyvinyl alcohol (PVA) networking with polyacrylic acid (PAA) were prepared by a non‐conventional emulsion method without any added crosslinker, using benzoyl peroxide as initiator and sodium chloride (NaCl) as additive. The IPN hydrogel was characterized by using Fourier transformed infrared (FTIR) spectrophotometry, Thermo gravimetric analysis (TGA), and Scanning electron microscopy (SEM). (PVA‐co‐PAA)/NaCl normal IPN hydrogel (H) were fabricated into hydrogel microspheres (HM) by modified emulsion crosslinking method using glutaraldehyde‐saturated toluene as crosslinker and were loaded with Diltiazem hydrochloride (DL). The IPN hydrogel showed more swelling in simulated intestinal fluid (SIF). (PVA‐co‐PAA)/NaCl HM formulation A1 showed comparatively higher DL entrapment (79%) and better control over DL release up to 24 h. By comparing antihypertensive activity of DL loaded two formulations in normotensive rats, HM formulation A1 found more effective in reducing blood pressure to 40.1%. The experimental results demonstrated that (PVA‐co‐PAA)/NaCl HM had the greater potential than normal hydrogel to be used as a drug carrier. A single use of the prepared hydrogel microsphere system of DL can effectively control hypertension in rats. The system holds promise for clinical studies. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of semi interpenetrating network hydrogel [(GrA‐Psy)‐cl‐Poly (AA)] and its application for efficient removal of malachite green from aqueous solution

In the present study, the synthesis of novel semi‐interpenetrating network (Semi‐IPN) hydrogel based on gum rosin alcohol‐psyllium (GrA‐Psy) has been reported. (Gum rosin alcohol‐psyllium)‐crosslinked‐poly(acrylic acid) [termed as (GrA‐Psy)‐cl‐poly (AA)] was synthesized using potassium persulphate (KPS) as an initiator and N, N^′? methylene‐bis‐acrylamide (MBA) as crosslinker by free radical graft co‐polymerization technique. The prepared semi‐IPN was characterized using FTIR, XRD, and FE‐SEM. Further, the synthesized hydrogel was evaluated for the removal of malachite green (MG) dye from aqueous solution. Dye adsorption data was analyzed through various isotherm and kinetic models. Thermodynamic parameters and reusability of the synthesized adsorbent were also assessed. POLYM. ENG. SCI., 59:1416–1427 2019. © 2019 Society of Plastics Engineers     

Nitrofurazone‐loaded PVA–PEG semi‐IPN for application as hydrogel dressing for normal and burn wounds

Hydrogels have been used in a wide variety of biomedical devises, particularly in the field of drug delivery, tissue engineering, and wound healing. In this study, a polyvinyl alcohol (PVA)–polyethylene glycol (PEG) semi‐interpenetrating hydrogel network (IPN)‐based wound dressing system containing nitrofurazone (NFZ) was synthesized by chemical crosslinking technique. The introduction of PEG to PVA matrix led to reduction in the water vapor transmission rate, which in‐turn resulted in improved healing activity. Drug‐loaded IPNs were prepared by mixing aqueous solution of NFZ with the optimized PVA–PEG formulation subsequent to the crosslinking step. The in vitro diffusion studies of NFZ indicated a relatively slow release of drug resulting from its microencapsulation in the polymeric matrix. Subsequently, in vivo wound healing efficacy toward acute and burn wound healing in experimental rats was investigated. Semi‐IPN hydrogel loaded with NFZ dressing improved the overall healing rate in both acute and burn wounds, as evidenced by significant increase in total protein, hydroxyproline and hexosamine contents. Histological examinations also correlated well with the biochemical findings. A faster wound contraction was also observed in hydrogel treated acute and burn wounds. The results indicated that PVA–PEG semi‐IPN hydrogel based dressing systems containing NFZ could be used as an effective wound dressing material. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and swelling behaviors of semi‐IPNs superabsorbent resin based on chicken feather protein

A novel chicken feather protein‐g‐poly (potassium acrylate)/polyvinyl alcohol (CFP‐g‐PKA/PVA) semi‐IPNs superabsorbent resin (SAR) based on feather protein, acrylic acid (AA), and polyvinyl alcohol (PVA) was synthesized by graft copolymerization and semi‐interpenetrating technology. The results from FTIR, SEM, and TGA analysis showed that both CFP and PVA reacted with PKA during the polymerization process. The effects of AA, PVA, initiator and crosslinker content on water absorbency of semi‐IPNs SAR were studied. The swelling behavior in various pHs and saline solutions were also investigated. The water absorbency of SAR reached the maximum at pH = 6. The effect of the five cations on swelling had the following order: Al³⁺ > Ca²⁺ > Mg²⁺ > K⁺ > Na⁺. The highest water absorbency in distilled water and 0.9 wt % NaCl solutions were 714.22 and 70.08 g g^?1, respectively. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39748.     

Preparation of alginate/poly(N‐isopropylacrylamide) semi‐interpenetrating and fully interpenetrating polymer network hydrogels with γ‐ray irradiation and their swelling behaviors

Semi‐interpenetrating polymer network (semi‐IPN) and fully interpenetrating polymer network (full‐IPN) hydrogels composed of alginate and poly(N‐isopropylacrylamide) were prepared with γ‐ray irradiation. The semi‐IPN hydrogels were prepared through the irradiation of a mixed solution composed of alginate and N‐isopropylacrylamide (NIPAAm) monomer to simultaneously achieve the polymerization and self‐crosslinking of NIPAAm. The full‐IPN hydrogels were formed through the immersion of the semi‐IPN film in a calcium‐ion solution. The results for the swelling and deswelling behaviors showed that the swelling ratio of semi‐IPN hydrogels was higher than that of full‐IPN hydrogels. A semi‐IPN hydrogel containing more alginate exhibited relatively rapid swelling and deswelling rates, whereas a full‐IPN hydrogel showed an adverse tendency. All the hydrogels with NIPAAm exhibited a change in the swelling ratio around 30–40°C, and full‐IPN hydrogels showed more sensitive and reversible behavior than semi‐IPN hydrogels under a stepwise stimulus. In addition, the swelling ratio of the hydrogels continuously increased with the pH values, and the swelling processes were proven to be repeatable with pH changes. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4439–4446, 2006     

Multilayer‐coated NPK compound fertilizer hydrogel with controlled nutrient release and water absorbency

A novel trilayered controlled‐release nitrogen, phosphorous, and potassium (NPK) fertilizer hydrogel was prepared by dipping the NPK fertilizer granules sequentially in 7% w v^?1 poly(vinyl alcohol) (PVA) and 2% w v^?1 chitosan (CS) solutions and then cross‐linking the CS layer (cross‐CS) via glutaraldehyde vapor deposition. Different NPK fertilizer hydrogels were then synthesized by inverse suspension polymerization of the dried PVA/cross‐CS bilayer‐coated fertilizer granules in various molar ratios of acrylamide (AM) and acrylic acid (AA) monomers, and polymerization with varying molar ratios of ammonium persulfate, N,N,N′,N′‐tetramethylethylenediamine and N,N′‐methylenebisacrylamide (N‐MBA). The water dissolution time of the obtained PVA/cross‐CS/poly (AA‐co‐AM) trilayer‐coated NPK fertilizer hydrogel granules was prolonged, while the water absorbency increased with increasing AA contents, and decreased with increasing N‐MBA contents in the outer poly(AA‐co‐AM) coating. The optimal trilayer‐coated NPK fertilizer hydrogel obtained released 84 ± 18, 63 ± 12, and 36 ± 15% of the N, P, and K nutrients, respectively, after a 30‐day immersion in water. The release phenomena of the N, P, and K nutrients of the fertilizer hydrogel obeyed both the Korsmeyer‐Peppas and Ritger‐Peppas models with a pseudo‐Fickian diffusion mechanism. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41249.     

Electroactive characteristics of interpenetrating polymer network hydrogels composed of poly(vinyl alcohol) and poly(N‐isopropylacrylamide)

An interpenetrating polymer network (IPN) composed of poly(vinyl alcohol) (PVA) and poly(N‐isopropylacrylamide) (PNIPAAm) was prepared by the sequential IPN method. The equilibrium swelling ratio and bending behavior under electric fields of the IPN hydrogel were measured in an aqueous NaCl solution. The IPN exhibited a high equilibrium swelling ratio, in the range 280–380%. When the IPN in aqueous NaCl solution was subjected to an electric field, the IPN showed significant and quick bending toward the cathode. The IPN hydrogel also showed stepwise bending behavior, depending on the electric stimulus. In addition, the ionic conductivity of the IPN hydrogel was measured using dielectric analysis, and its conductive behavior followed the Arrhenius equation. The conductivity of the IPN hydrogel and the activation energy for the form of the IPN were 1.68 × 10^?5 S/cm at 36°C and 61.0 kJ/mol, respectively. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 890–894, 2003     

Preparation and properties of alkaline anion exchange membrane with semi‐interpenetrating polymer networks based on poly(vinylidene fluoride‐co‐hexafluoropropylene)

Alkaline anion exchange membrane with semi‐interpenetrating polymer network (s‐IPN) was constituted based upon quaternized poly(butyl acrylate‐co‐vinylbenzyl chloride) (QPBV) and poly(vinylidene fluoride‐co‐hexafluoropropylene) [P(VDF‐HFP)]. The QPBV was synthesized via the free radical copolymerization, followed by quaternization with N‐methylimidazole. The s‐IPN system was constituted by melting blend of QPBV and P(VDF‐HFP), and then crosslinking of P(VDF‐HFP). Ion exchange capacity, water uptake, mechanical performance, and thermal stability of these membranes were characterized. TEM showed that alkaline anion exchange membrane exhibited s‐IPN morphology with microphase separation. The fabricated s‐IPN membrane exhibited hydroxide ion conductivity up to 15 mS cm^?1 at 25 °C and a maximum DMFC power density of 46.55 mW cm^?2 at a load current density of 98 mA cm^?2 at 30 °C. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45775.     

Swelling dynamics of IPN hydrogels including acrylamide‐acrylic acid‐chitosan and evaluation of their potential for controlled release of piperacillin‐tazobactam

For to be used in controlled releasing of piperacillin‐tazobactam, a series of semi and full IPN type hydrogels composed of acrylic acid (AA), acrylamide (AAm) and Chitosan (CS) were prepared via free‐radical polymerization. Ethylene glycol dimethacrylate (EGDMA) was used for crosslinking of PAAm and PAA chains to form semi‐IPN hydrogels. However, the full‐IPN type hydrogels were prepared by using glutaraldehyde (GA) and EGDMA as cocrosslinkers. Characteristics of the hydrogels were investigated by swelling experiments and SEM and FTIR analysis. Generally, full‐IPN type hydrogels swell much more than the semi‐IPN types. By comparing the full‐IPN type hydrogels in between, it is found that the increasing amount of GA causes the decreasing in S% values from 4860 to 4300%. Releasing of piperacillin‐tazobactam from selected three hydrogels were investigated in phosphate buffer solution at pH = 7.4, 37°C. The kinetic release parameters, n and k were calculated and non‐Fickian type diffusion was established for these hydrogels. The behaviors of the piperacillin‐tazobactam loaded hydrogels in Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa) culture suspensions were also studied and the statistically significant differences for the microorganism growth values were determined. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

A robust and coarse surface mesh modified by interpenetrating polymer network hydrogel for oil‐water separation

A robust and coarse surface mesh was fabricated by introducing a hydrogel coating with interpenetrating polymer network (IPN) structure on stainless steel mesh. The IPN hydrogel was prepared by crosslinking polymerization of acrylic acid (AA) followed by condensation reaction of polyvinyl alcohol (PVA) and glutaraldehyde (GA) at room temperature. As a result, the roughness of modified mesh was enhanced obviously and oil droplet underwater showed a larger contact angle. The hydrogel‐coated surface showed an underwater superoleophobicity with an oil contact angle of 153.92 ± 1.08^°. Besides, stable wettability was observed. The mesh can selectively separate oil from water with a high separation efficiency of above 99.8%. This work provides a facile method to strengthen the coating and enhance the efficiency of oil‐water separation. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41949.     

The swelling behaviors and network parameters of cationic starch‐g‐acrylic acid/poly(dimethyldiallylammonium chloride) semi‐interpenetrating polymer networks hydrogels

Amphiphilic semi‐interpenetrating polymer networks (semi‐IPN) hydrogels were prepared by a sequential‐IPN method by acrylic acid graft copolymerization into cationic starch in mild aqueous media of poly(dimethyldiallylammonium chloride). Some main factors were investigated to evaluate the swelling of hydrogels, and the network parameters M_c were given accordingly to elaborate the interaction between polymers. The chemical structure of the resulting hydrogel was confirmed using Fourier transform infrared spectroscopy. The cationic starch‐based semi‐IPN hydrogels achieved a high swelling capacity of 1070 g/g in deionized water and 94 g/g in 0.9 wt % NaCl solution, respectively) and high compressive stress in a high water content. Besides, a different pH‐dependent behavior was found for this semi‐IPN hydrogel. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation and properties of porous poly(sodium acrylate‐co‐acrylamide) salt‐resistant superabsorbent composite

A novel semi‐interpenetrating polymer networks (semi‐IPNs) porous salt‐resistant superabsorbent composite was prepared by copolymerization of partially neutralized acrylic acid and acrylamide using polyethylene glycol as semi‐IPNs composite, N,N′‐methylenebisacrylamide, triene propanol phosphate, and trihydroxymethyl propane glycidol ether as crosslinking agents, methanol, propanol, and butanol as foaming agents, and L ‐ascorbic acid and peroxide hydrogen as initiators. To improve the properties of swollen hydrogel, such as strength, resilience, permeabilities, and dispersion, the copolymer was surface‐crosslinked, and then blended with aluminum sulfate, sodium carbonate, and sodium 1‐octadecanol phosphate in the course of post treatment. The influences of reaction conditions on properties of superabsorbent composite were investigated and optimized, and the water absorbency of superabsorbent composite prepared at optimal conditions in 0.9 wt% NaCl aqueous solution under atmospheric pressure and certain load (P ≈ 2 × 10³ Pa) were 61 g g^?1 and 16.7 g g^?1, respectively. Moreover, the swelling rate reached 22.003 × 10^?3 g (g s)^?1. And the excellent hydrogel properties, such as hydrogel strength, resilience, permeabilities, and dispersion were also obtained. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Synthesis of poly(acrylic acid)–Fe3+/gelatin/poly(vinyl alcohol) triple‐network supramolecular hydrogels with high toughness,high strength and self‐healing properties

Hydrogels with good mechanical and self‐healing properties are of great importance for various applications. Poly(acrylic acid)–Fe³⁺/gelatin/poly(vinyl alcohol) (PAA‐Fe³⁺/Gelatin/PVA) triple‐network supramolecular hydrogels were synthesized by a simple one‐pot method of copolymerization, cooling and freezing/thawing. The PAA‐Fe³⁺/Gelatin/PVA triple‐network hydrogels exhibit superior toughness, strength and recovery capacity compared to single‐ and double‐network hydrogels. The mechanical properties of the synthesized hydrogels could be tailored by adjusting the compositions. The PAA‐Fe³⁺/Gelatin/PVA triple‐network hydrogel with 0.20 mmol Fe³⁺, 3% gelatin and 15% PVA could achieve good mechanical properties, the tensile strength and elongation at break being 239.6 kPa and 12.8 mm mm^?1, respectively, and the compression strength reaching 16.7 MPa under a deformation of about 91.5%. The synthesized PAA‐Fe³⁺/Gelatin/PVA triple‐network hydrogels have good self‐healing properties owing to metal coordination between Fe³⁺ and carboxylic groups, hydrogen bonding between the gelatin chains and hydrogen bonding between the PVA chains. Healed PAA‐Fe³⁺(0.20)/Gelatin3%/PVA15% triple‐network hydrogels sustain a tensile strength of up to 231.4 kPa, which is around 96.6% of the tensile strength of the original samples. Therefore, the synthesized triple‐network supramolecular hydrogels would provide a new strategy for gel research and expand the potential for their application. © 2019 Society of Chemical Industry     

Syntheses,characterization, and antibacterial activity of chitosan grafted hydrogels and associated mica‐containing nanocomposite hydrogels

Chitosan (CS) grafted poly[(acrylic acid)‐co‐(2‐hydroxyethyl methacrylate)] (CS‐g‐poly(AA‐co‐HEMA)) at different molar ratios of AA and HEMA, and the associated nanocomposite hydrogels of CS‐g‐poly(AA‐co‐HEMA)/mica were synthesized by radical copolymerization. The grafting positions at the amino or hydroxyl groups in the CS were identified by Fourier transform infrared spectroscopy. CS‐g‐poly(AA‐co‐HEMA) hydrogels were intercalated in the mica and the amount of hydrogel insertion did not affect the spacing of the silicate layers in mica. The higher mica loadings produced a rougher surface of the nanocomposite hydrogel. The water absorbency of the CS‐g‐poly(AA‐co‐HEMA)/mica nanocomposite hydrogels decreased with increasing levels of mica loading to a lower level than those of the CS‐g‐poly(AA‐co‐HEMA) hydrogels. Both CS‐g‐poly(AA) and CS‐g‐poly(AA‐co‐HEMA)/mica nanocomposite hydrogels exhibited a higher antiproliferative activity against Staphylococcus aureus than did the neat CS hydrogel with CS‐g‐poly(AA) revealing a very pronounced minimum inhibition concentration (MIC) of 1.56 mg mL^?1. The extent of mica loading in the CS‐g‐poly(AA‐co‐HEMA) nanocomposite hydrogels did not affect the MIC (12.5 mg mL^?1). © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Mechanical Strengths of Hydrogels of Poly(N,N‐Dimethylacrylamide)/Alginate with IPN and of Poly(N,N‐Dimethylacrylamide)/Chitosan with Semi‐IPN Microstructures

Tough hydrogels receive continuous attention because of their promising applications in many fields. Herein, tough hydrogels of poly (N,N‐dimethylacrylamide) (PDMAA)/alginate (SA) are prepared, with interpenetrating network (IPN) and of PDMAA/chitosan (CS) with semi‐IPN microstructure, respectively. The toughening of the hydrogel by incorporating natural polymers is studied by compressing tests and dynamic mechanical analyses. Moreover, cyclic load–unload compressing of the two types of hydrogels are performed at low strains and under relatively high strains, in order to compare their strength and anti‐fatigue properties. The results indicate that the mechanical strength can be markedly improved upon addition of the natural polymers, and the IPN hydrogel of PDMAA/SA reveals much higher mechanical performances but is less stable. However, the semi‐IPN hydrogel of PDMAA/CS displays excellent anti‐fatigue stability, but with relatively low strength. Swelling tests, scanning electron microscopy, and Fourier transform infrared spectroscopy are carried out to study the microstructures of the hydrogels, which are carefully analyzed to understand the difference in mechanical performances of those hydrogels. The results suggest that the presence of sacrificial unit and higher chain density in the IPN are helpful for toughening hydrogels, while the semi‐IPN network is beneficial to improve the energy dissipation efficiency.     

Preparation and characterization of PVA membrane modified by water‐soluble hyperbranched polyester (WHBP) for the dehydration of n‐butanol

Water‐soluble hyperbranched polyester (WHBP) was synthesized through the esterification reaction of the fourth generation hyperbranched polyester and maleic anhydride. A novel cross‐linked WHBP/PVA membrane was prepared by adding WHBP into poly(vinyl alcohol) (PVA) solution with glutaraldehyde as the cross‐linker. WHBP was characterized by Nuclear Magnetic Resonance and Attenuated Total Reflection Fourier Transform Infrared Spectroscopy (ATR‐FTIR), while WHBP/PVA membranes were characterized by ATR‐FTIR, X‐ray Diffraction, Scanning Electron Microscopy, Thermogravimetric Analysis, mechanical capacity, and water contact angle. Testing results showed that maleic anhydride was grafted on the surface of WHBP; compared with PVA membrane, WHBP/PVA membrane had lower crystallinity, weaker mechanical strength, higher hydrophilicity, and better thermal stability. Sorption and diffusion behaviors of n‐butanol and water in WHBP/PVA membrane were investigated; pervaporation performances of WHBP/PVA membrane were studied through the dehydration of the 90 wt % n‐butanol aqueous solution at 40°C. With an increase of the WHBP content from 0 to 30 wt %, both n‐butanol uptake and n‐butanol diffusion coefficient first decreased then increased; n‐butanol flux first decreased from 10 to 2 g·m^?2·h^?1 then increased to 213 g·m^?2·h^?1; both sorption selectivity and diffusion selectivity first increased then decreased; separation factor first increased from 88 to 1309 then decreased to 16. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43533.     

Swelling behavior of semi‐interpenetrating polymer network hydrogels composed of poly(vinyl alcohol) and poly(acrylamide‐co‐sodium methacrylate)

Interpenetrating polymer network (IPN) hydrogels based on poly(vinyl alcohol) (PVA) and poly(acrylamide‐co‐sodium methacrylate) poly(AAm‐co‐SMA) were prepared by the semi IPN method. These IPN hydrogels were prepared by polymerizing aqueous solution of acrylamide and sodium methacrylate, using ammonium persulphate/N,N,N¹,N¹‐tetramethylethylenediamine (APS/TMEDA) initiating system and N,N¹‐methylene‐bisacrylamide (MBA) as a crosslinker in the presence of a host polymer, poly(vinyl alcohol). The influence of reaction conditions, such as the concentration of PVA, sodium methacrylate, crosslinker, initiator, and reaction temperature, on the swelling behavior of these IPNs was investigated in detail. The results showed that the IPN hydrogels exhibited different swelling behavior as the reaction conditions varied. To verify the structural difference in the IPN hydrogels, scanning electron microscopy (SEM) was used to identify the morphological changes in the IPN as the concentration of crosslinker varied. In addition to MBA, two other crosslinkers were also employed in the preparation of IPNs to illustrate the difference in their swelling phenomena. The swelling kinetics, equilibrium water content, and water transport mechanism of all the IPN hydrogels were investigated. IPN hydrogels being ionic in nature, the swelling behavior was significantly affected by environmental conditions, such as temperature, ionic strength, and pH of the swelling medium. Further, their swelling behavior was also examined in different physiological bio‐fluids. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 302–314, 2005