Novel chiral poly(amide-imide)/surface modified SiO2 nanocomposites based on N-trimellitylimido-l-methionine: Synthesis and a morphological study

In the present investigation, novel poly(amide-imide) (PAI)/SiO₂ nanocomposites (NCs) containing l-methionine moiety in the main chain were prepared via a simple and fast ultrasonic irradiation process. PAI was synthesized by direct poly condensation reaction of N-trimellitylimido-l-methionine with 4,4′-diamino diphenylether in molten tetra-n-butyl ammonium bromide/triphenyl phosphite as a green condensing agent. Due to the high surface energy and tendency for agglomeration, the surface of SiO₂ NPs was modified with chiral diacid. The obtained NCs were characterized by Fourier transform-infrared (FT-IR) spectroscopy, thermogravimetry analysis, X-ray powder diffraction, field emission-scanning electron microscopy (FE-SEM), and transmission electron microscopy (TEM). The FT-IR spectroscopy indicated that the chiral diacid as the coupling agent was attached on the surface of SiO₂ NPs. FE-SEM, and TEM images showed that SiO₂ NPs were dispersed rather homogeneously in the PAI matrix.     

Construction and characterization of poly(amide-ester-imide) nanocomposites containing N-trimellitylimido-l-leucine toughened with a combination of bioactive surface-grafted TiO2

This paper addressed production and characterization of novel type copolyester/titania (TiO₂) nanocomposites (NCs). First, the surface of TiO₂ was modified by chiral diacid monomer, N-trimellitylimido-l-leucine (TMIL) (1) as a coupling agent to form organomodified TiO₂ (O-TiO₂) nanoparticles (NPs). Fourier transform infrared (FT-IR) spectroscopy confirmed the presence of coupling agent groups on the surface. Thereafter, a novel chiral poly(amide-ester-imide) (PAEI) was synthesized by step-growth polymerization of diacid monomer 1 with diol, N,N′-(1,3,5,7-tetraoxo-5,7-dihydropyrrolo[3,4-f]isoindole-2,6(1H,3H)-diyl)bis(4-hydroxybenzamide) (2) via tosyl chloride, pyridine and N,N-dimethyformamide as a condensing agent. The incorporation of O-TiO₂ NPs into the obtained PAEI provided an opportunity for the construction of polymer-based NCs with novel and powerful properties. The obtained NCs were premeditated using transmission electron microscopy (TEM), FT-IR spectra, thermogravimetric analysis (TGA), field emission scanning electron microscopy (FE-SEM), X-ray diffraction; also the optical properties of the NCs were studied using ultraviolet-visible spectroscopy. The TEM and FE-SEM results showed that the NPs were dispersed homogeneously in PAEI matrix on the nanoscale. TGA data confirmed that the heat stability of the aforementioned NCs in the presence of O-TiO₂ NPs was improved.     

Production and evaluation of the surface properties of chiral poly(amide-imide)/TiO2 nanocomposites containing L-phenylalanine units

This study concerted on the immobilization of nano-titanium dioxide particles (TiO₂, 30–50 nm particle size) into or onto an optically active poly(amide-imide) (PAI). The matrix PAI consisted of the chiral units in the main and hydroxybenzamide functional groups in the side chains. The macromolecule structure has been fabricated from the reaction of 3,5-diamino-N-(4-hydroxyphenyl) benzamide and N,N′-(pyromellitoyl)-bis-L-phenylalanine diacid chloride at low temperature. The hydroxyl groups on the side chains of the PAI could provide better compatibility and bonding, which cause to suitable homogenous dispersion of nanoparticles (NPs) in the obtained nanocomposites (NCs). Also due to prevention of aggregation, the surface of TiO₂ NPs was functionalized by 3-aminopropyltri-ethoxysilane as a coupling agent to introduce amine groups on the NPs surfaces. Atomic force microscopy, field emission scanning electron microscopy, transmission electron microscopy and contact angle measurements were used for investigation of the surface properties of obtained NCs. These results confirmed the well-dispersion of nanoTiO₂ in the PAI matrix.     

Efficient preparation of hybrid nanocomposite coatings based on poly(vinyl alcohol) and silane coupling agent modified TiO2 nanoparticles

In the present investigation, at first, the surface of titanium dioxide (TiO₂) nanoparticles was modified with γ-aminopropyltriethoxy silane as a coupling agent. Then a new kind of poly(vinyl alcohol)/titanium dioxide (PVA/TiO₂) nanocomposites coating with different modified TiO₂ loading were prepared under ultrasonic irradiation process. Finally, these nanocomposites coating were used for fabrication of PVA/TiO₂ films via solution casting method. The resulting nanocomposites were fully characterized by Fourier transform infrared spectroscopy (FT-IR), powder X-ray diffraction (XRD), thermogravimetric analysis/derivative thermal gravimetric (TGA/DTG), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The TEM and SEM results indicated that the surface modified nanoparticles were dispersed homogeneously in PVA matrix on nanoscale and based on obtained results a possible mechanism was proposed for ultrasonic induced nanocomposite fabrication. TGA confirmed that the heat stability of the nanocomposite was improved. UV–vis spectroscopy was employed to evaluate the absorbance and transmittance behavior of the PVA/TiO₂ nanocomposite films in the wavelength range of 200–800 nm. The results showed that this type of films could be used as a coating to shield against UV light.     

Preparation and properties of β-CaSiO3/ZrO2 (3Y) nanocomposites

β-CaSiO₃/ZrO₂ (3Y) nanocomposites were successfully fabricated by spark plasma sintering (SPS) technique. The addition of nanocrystalline ZrO₂ could inhibit the phase transition of micrometer sized CaSiO₃ and increase its phase transitional temperature. The relative densities of the dense β-CaSiO₃/ZrO₂ nanocomposites were above 98%. Nanocrystalline ZrO₂ has formed a network structure in the nanocomposites, which could improve the mechanical properties of nanocomposites. The fracture strength and fracture toughness of the nanocomposites were as high as 395 MPa and 4.08 MPa m^1/2, respectively. The nanocomposites showed good in vitro bioactivity with hydroxyapatite (HA) layer formation on the ZrO₂ network of the nanocomposites in simulated body fluid. The spark plasma sintered β-CaSiO₃/ZrO₂ (3Y) nanocomposite may provide a new bone graft for load bearing applications.     

Improvement of the Interactions between Modified ZrO2 and Poly(amide-imide) Matrix by Using Unique Biosafe Diacid as a Monomer and Coupling Agent

This research explores the synthesis of a high-performance poly(amide-imide) (PAI) from the polycondensation reaction of N-trimellitylimido-L-leucine as a bioactive diacid with 4,4′-diaminediphenylsulphone using combination of triphenyl phosphite and tetra-n-butylammonium bromide as a condensing agent. ZrO₂ nanoparticle (NP) was used as a filler for the formation of PAI nanocomposites (NC)s. For a unique dispersion of NPs in the PAI matrix, the surface of ZrO₂-NPs was modified with bioactive N-trimellitylimido-L-leucine using ultrasonic technique. The obtained polymer and modified ZrO₂-NPs were used to produce PAI/ZrO₂ NCs under ultrasonic irradiation. The obtained NCs were characterized by different methods.     

Electrical energy density and dielectric properties of poly(vinylidene fluoride-chlorotrifluoroethylene)/BaSrTiO3 nanocomposites

A series of poly(vinylidene fluoride-chlorotrifluoroethylene) (P(VDF-CTFE))/barium strontium titanate (BST) nanocomposites were fabricated by solution casting method. The addition of BST nanoparticles could enhance both the dielectric constant and the displacement of the resultant composite significantly. The surface activation of BST nonaparticles with KH550 was confirmed as an effective way to improve the breakdown strength of the composite. The high electric displacement (D > 15 μC/cm²), breakdown field (>200 MV/m) and low dielectric loss in P(VDF-CTFE)/BST nanocomposites suggest that the high electrical energy density may be desirable. That indicates the potential application of this class of copolymer/ceramics nanocomposites for high energy storage components.     

Synthesis and characterization of bionanocomposites of poly(lactic acid) and TiO2 nanowires by in situ polymerization

Bionanocomposites from biopolymers and inorganic nanoparticles are of great interest for packaging materials due to their enhanced physical, thermal, mechanical, and processing characteristics. In this study, poly(lactic acid) (PLA) nanocomposites with covalent bonding between TiO₂ nanowire surface and PLA chains were synthesized through in situ melt polycondensation. Molecular weight, structure, morphology, and thermal properties were characterized. Fourier transform infrared spectroscopy confirmed that PLA chains were covalently grafted onto TiO₂ nanowire surface. Transmission electron microscopy images also revealed clearly a third phase presence on the nanowires after the grafting process. Those grafted PLA chains exhibited significantly increased glass transition temperature and thermal stability, compared with pure PLA. The weight-average molecular weight of PLA/2% TiO₂ nanowire bulk nanocomposites increased by 66% compared with that of pure PLA. The electron microscopy results showed that strong interfacial interaction and homogeneous distribution were achieved between inorganic nanowires and organic PLA matrix in the bulk nanocomposites. The PLA matrix in bulk nanocomposites exhibited elevated glass transition temperature and decreased crystallization ability as the TiO₂ nanowire concentrations were increased from 0 to 2%.     

Synthesis and characterization of polyamides and poly(amide-imide)s based on ether-sulfone-diamines

A series of polyamides and poly(amide-imide)s were prepared by the direct polycondensation of 4,4′-[sulfonylbis(1,4-phenyleneoxy)]dianiline or 4,4′-[sulfonylbis(2,6-dimethyl-1,4-phenyleneoxy)]dianiline with aromatic dicarboxylic acids and phthalimide unit-bearing dicarboxylic acids in a N-methyl-2-pyrrolidone (NMP) solution containing dissolved calcium chloride using triphenyl phosphite and pyridine as condensing agents. The inherent viscosities of the resulting polymers were above 0.45 dL/g and up to 1.70 dL/g. Except for the polyamides derived from terephthalic acid and 4,4′-biphenyldicarboxylic acid, all the other polyamides and all poly(amide-imide)s were readily soluble in polar organic solvents such as NMP, N, N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), and m-cresol, and afforded transparent and tough films by solution-casting. Most of the polymers showed distinct glass transition on their differential scanning calorimetry (DSC) traces and their glass transition temperatures (T_g) stayed between 140–264 °C. The methyl-substituted polymers showed higher T_gs than the corresponding unsubstituted counterparts. The results of the thermogravimetry analysis (TGA) revealed that all the methyl-substituted polymers showed lower initial decomposition temperatures than the unsubstituted ones.     

Phase segregation phenomena in poly(ethylene oxide):LiN(CF3SO2)2 electrolyte studied by local Raman spectroscopy

Polymer electrolyte composed of poly(ethylene oxide) PEO with dissolved lithium bis (trifluoromethanesulfonyl)imide salt LiTFSI of molar ratio EO:Li 16:1 was prepared by casting from solution. The electrolyte has been investigated by microscope observation simultaneous with impedance spectroscopy, differential scanning calorimetry and local Raman spectroscopy. The presented results provide direct support for model of phase segregation which takes place in PEO:LiTFSI electrolytes. According to the model proposed in our earlier publications, crystallization of PEO or PEO:salt complexes causes rejection or drainage of salt from specific regions of electrolyte. Thus, a resulting semicrystalline electrolyte is divided into large domains of different composition. In the case of investigated PEO:LiTFSI 16:1 electrolyte, the results obtained by local Raman spectroscopy indicated, that in areas situated within large circular spherulites the concentration of salt is lower than in molten (amorphous) electrolyte. In areas situated outside of these spherulites, the concentration of salt was considerably higher than for amorphous electrolyte. This is in good agreement with the assumption that the circular spherulites have the crystalline skeleton of pure PEO, whereas the PEO₆:LiTFSI crystalline phase dominates in the areas between their borders.     

Branched poly(arylene ether ketone)s with tailored thermal properties: Effects of AB/AB2 ratio, core (B3) percentage, and reaction temperature

A series of poly(ether ketone) copolymers were prepared by nucleophilic aromatic polymerization reactions of the AB monomer 4-fluoro-4′-hydroxybenzophenone, 1, and the AB₂ monomer bis(4-fluorophenyl)-(4-hydroxyphenyl)phosphine oxide, 2, in the presence of 3 or 5 mol% of a highly reactive core molecule, tris(3,4,5-trifluorophenyl)phosphine oxide (B₃), 4. All of the copolymers prepared in the presence of a core molecule were sufficiently soluble in N-methylpyrrolidinone, NMP, to allow the determination of their molecular weights and polydispersity indices, PDIs. Number-average molecular weights, M_ns, of 3200-6800 Da were determined and the PDI values ranged from 1.41 to 4.07. The M_n was controlled by the mol% of 4 present in the reaction mixture with higher molar percentages leading to lower M_n values. Lower reaction temperatures and lower ratios of AB/AB₂ monomers afforded copolymers with lower PDI values. As expected, the crystallinity of the samples decreased with an increasing AB₂ content or an increase in PDI. The copolymers also exhibited excellent thermo-oxidative stability with a number of samples suffering 5% weight losses at temperatures, in air, well in excess of 450 °C.     

An unusual H2O2 electrochemical sensor based on Ni(OH)2 nanoplates grown on Cu substrate

In this work, Ni(OH)₂ nanoplates grown on the Cu substrate were synthesized and characterized by scanning electron microscopy (SEM), X-ray powder diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Then a novel Cu-Ni(OH)₂ modified glass carbon electrode (Cu-Ni(OH)₂/GCE) was fabricated and evaluated by electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and typical amperometric response (i-t) method. Exhilaratingly, the Cu-Ni(OH)₂/GCE shows significant electrocatalytic activity toward the reduction of H₂O₂. At an applied potential of −0.1 V, the sensor produces an ultrahigh sensitivity of 408.1 μA mM⁻¹ with a low detection limit of 1.5 μM (S/N = 3). The response time of the proposed electrode was less than 5 s. What's more, the proposed sensor displays excellent selectivity, good stability, and satisfying repeatability.     

Synthesis and characterization of novel type poly (4-chloromethyl styrene-grft-4-vinylpyridine)/TiO2 nanocomposite via nitroxide-mediated radical polymerization

This paper describes the synthesis and characterization of novel type poly (4-chloromethyl styrene-graft-4-vinylpyridine)/TiO₂ nanocomposite. Firstly, poly (4-chloromethyl styrene)/TiO₂ nanocomposite was synthesized by in situ free radical polymerizing of 4-chloromethyl styrene monomers in the presence of 3-(trimethoxysilyl) propylmethacrylate (MPS) modified nano-TiO₂. Thereafter, 1-hydroxy-2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO-OH) was synthesized by the reduction of 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO). This functional nitroxyl compound was covalently attached to the poly (4-chloromethyl styrene)/TiO₂ with replacement of chlorine atoms in the poly (4-chloromethyl styrene) chains. The controlled graft copolymerization of 4-vinylpyridine was initiated by poly (4-chloromethyl styrene)/TiO₂ nanocomposite carrying TEMPO groups as a macroinitiators. The coupling of TEMPO with poly (4-chloromethyl styrene)/TiO₂ was verified using ¹H nuclear magnetic resonance (NMR) spectroscopy. The obtained nanocomposites were studied using transmission electron microscopy (TEM), Fourier-transform infrared (FTIR) spectra, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and the optical properties of the nanocomposites were studied using ultraviolet-visible (UV-Vis) spectroscopy.     

Electrochemical polymerization and characterization of a poly(azulene)-TiO<Subscript>2</Subscript> nanoparticle composite film

A poly(azulene)-TiO₂ composite film (PAz-TiO₂) was synthesized electrochemically by oxidation of azulene in an electrolyte medium containing TiO₂ nanoparticles. Polymerization was performed under magnetic stirring in an acetonitrile solution containing tetrabutylammonium hexafluorophosphate as the electrolyte salt. Influence of the concentration of TiO₂ in the reaction suspension on the electrochemical and optical properties and on the structure of the composite films was studied by cyclic voltammetry, ex situ Raman and FTIR reflection spectroscopy and in situ UV–vis and FTIR spectroelectrochemical techniques. Morphology of the composite films was studied by Scanning Electron Microscopy and the amount and distribution of the TiO₂ nanoparticles within the polymeric matrix by Inductively Coupled Plasma Mass Spectrometry with laser ablation. Addition of TiO₂ in the reaction suspension had a small catalytic activity for the polymerization of Az. Inclusion of TiO₂ nanoparticles in PAz did not affect the voltammetric behavior or the chemical structure of the formed polymer films. However, a different chain conformation and morphology of the film was formed when synthesized in presence of TiO₂ compared to the plain PAz film. It was also found that the film morphology was more homogeneous when the concentration of TiO₂ was ≥10 mM in the polymerization solution than films polymerized without any TiO₂.     

Metal-organic framework Cu3 (BTC)2(H2O)3 catalyzed Aldol synthesis of pyrimidine-chalcone hybrids

A typical metal organic framework, [Cu₃ (BTC)₂(H₂O)₃, BTC = 1,3,5-benzene tricarboxylate] has been used for the synthesis of pyrimidine-chalcones. We have explored a green synthesis of pyrimidine chalcones under Cu₃(BTC)₂ catalysis by Aldol condensation. Easy isolation of product, excellent yield, and recyclable catalyst makes this reaction eco-friendly. The technology was demonstrated to be applicable to the synthesis of a host of chemical hybrids.     

Preparation and characterization of SiO2/polydopamine/Ag nanocomposites with long-term antibacterial activity

Silver nanoparticles (Ag NPs) with diameter of approximately 10 nm were prepared by the reduction of silver nitrate using green synthesis, an eco-friendly approach. The synthesized Ag NPs were homogeneously deposited on silicon dioxide (SiO₂) particles modified with dopamine, leading to the formation of SiO₂/polydopamine (PD)/Ag nanocomposites (NCs) with a core–shell–satellite structure investigated by transmission electron microscopy. The Ag content of SiO₂/PD/Ag NCs determined by inductively coupled plasma optical emission spectrometry was approximately 5.92 wt%. The antibacterial properties of both Ag NPs and SiO₂/PD/Ag NCs against Vibrio natriegens (V. natriegens) and Erythrobacter pelagi sp. nov. (E. pelagi) were investigated by bacterial growth curves and inhibition zone. Compared to Ag NPs, the SiO₂/PD/Ag NCs exhibited superior long-term antibacterial activity, attributed to its controlled release of Ag⁺ ions.     

Mechanical properties of Al2O3-Cr2O3/Cr3C2 nanocomposite fabricated by spark plasma sintering

The fine grains of Al₂O₃-Cr₂O₃/Cr-carbide nanocomposites were prepared by employing recently developed spark plasma sintering (SPS) technique. The initial materials were fabricated by a metal organic chemical vapor deposition (MOCVD) process, in which Cr(CO)₆ was used as a precursor and Al₂O₃ powders as matrix in a spouted chamber. The basic mechanical properties like hardness, fracture strength and toughness, and the nanoindentation characterization of nanocomposites such as Elastics modulus (E), elastic work (W_e) and plastic work (W_p) were analyzed. The microstructure of dislocation, transgranular and step-wise fracture surface were observed in the nanocomposites. The nanocomposites show fracture toughness of (4.8 MPa m^1/2) and facture strength (780 MPa), which is higher than monolithic alumina. The strengthening mechanism from the secondary phase and solid solution are also discussed in the present work. Nanoindentation characterization further illustrates the strengthening of nanocomposites.     

Preparation of ceramic nanospheres by CO2 laser vaporization (LAVA)

In order to prepare ceramic nanoparticles by CO₂ laser vaporization (LAVA) coarse ceramic powders (e.g. ZrO₂, Al₂O₃, and TiO₂) were used as raw materials. The raw powder was vaporized into a flowing process gas under normal pressure. Expanding into the gas, the vapor instantly cools down. Gas-phase condensation leads to the formation of nanoscale particles with a composition that corresponds to that of the raw powder. LAVA nanoparticles are chemically pure, spherical, crystalline, exhibit a narrow size distribution, and form merely soft agglomerates. The co-laser vaporization of mixtures of ceramic raw powders allows for the preparation of nanoparticles of multi-phase (e.g. Fe₂O₃-SiO₂) or single-phase (e.g. CaTiO₃) mixed-oxides and dispersion ceramics (e.g. ZrO₂-Al₂O₃). In order to modify the surface of the nanoparticles they can be coated in-process with an organic additive. Thus, the LAVA method allows for the targeted development of a wide range of ceramic nanopowders with tailored properties.