Effect of Previous Milling of Precursors on Magnetoelectric Effect in Multiferroic {\mathrm{Bi}_{5}\mathrm{Ti}_{3}\mathrm{FeO}_{15}} Ceramic

$\mathrm{Bi}_{5}\mathrm{Ti}_{3}\mathrm{FeO}_{15}$ Bi 5 Ti 3 FeO 15 magnetoelectric (ME) ceramics have been synthesized and investigated. The ME effect can be described as an induced electric polarization under an external magnetic field or an induced magnetization under an external electric field. The materials in the ME effect are called ME materials, and they are considered to be a kind of new promising materials for sensors, processors, actuators, and memory systems. Multiferroics, the materials in which both ferromagnetism and ferroelectricity can coexist, are the prospective candidates which can potentially host the gigantic ME effect. $\mathrm{Bi}_{5}\mathrm{Ti}_{3}\mathrm{FeO}_{15}$ Bi 5 Ti 3 FeO 15 , an Aurivillius compound, was synthesized by sintering a mixture of $\mathrm{Bi}_{2}\mathrm{O}_{3}, \mathrm{Fe}_{2}\mathrm{O}_{3}$ Bi 2 O 3 , Fe 2 O 3 , and $\mathrm{TiO}_{2}$ TiO 2 oxides. The precursor materials were prepared in a high-energy attritorial mill for (1, 5, and 10) h. The orthorhombic $\mathrm{Bi}_{5}\mathrm{Ti}_{3}\mathrm{FeO}_{15}$ Bi 5 Ti 3 FeO 15 ceramics were obtained by a solid-state reaction process at 1313 K. The ME voltage coefficient ( $\alpha _\mathrm{ME}$ α ME ) was measured using the dynamic lock-in method. The highest ME voltage coefficient ( $\alpha _\mathrm{ME} = 8.28\,\text{ mV }{\cdot }\text{ cm }^{-1}{\cdot }\text{ Oe }^{-1})$ α ME = 8.28 mV · cm ? 1 · Oe ? 1 ) is obtained for the sample milled for 1 h at $H_\mathrm{DC }= 4$ H DC = 4  Oe (1 Oe = 79.58  $\text{ A }{\cdot }\text{ m }^{-1})$ A · m ? 1 ) .     

A Study of Some Thermophysical Parameters in Glassy \mathrm{{Se}}_{80}\mathrm{{Te}}_{20} and \mathrm{{Se}}_{80}\mathrm{{Te}}_{10}\mathrm{{M}}_{10} (Cd, In, and Sb) Alloys

The present paper reports a comparative study of some thermophysical properties (thermal conductivity, thermal diffusivity, thermal effusivity, and specific heat per unit volume) for $\mathrm{{Se}}_{80}\mathrm{{Te}}_{20}$ Se 80 Te 20 and $\mathrm{{Se}}_{80}\mathrm{{Te}}_{10}\mathrm{{M}}_{10}$ Se 80 Te 10 M 10 (Cd, In, and Sb) alloys. The transient plane source technique is used for this purpose. The thermal conductivity is highest for $\mathrm{{Se}}_{80}\mathrm{{Te}}_{10}\mathrm{{In}}_{10}$ Se 80 Te 10 In 10 as compared to the other ternary alloys. This is explained in terms of the thermal conductivity of additive elements Cd, In, and Sb. The composition dependence of the thermal diffusivity and specific heat per unit volume is also discussed.     

Transfer Partial Molar Isentropic Compressibilities of (l-Alanine/l-Glutamine/Glycylglycine) from Water to 0.512 {\mathrm{mol}}\!\cdot \!{\mathrm{kg}}^{-1} Aqueous {\mathrm{KNO}}_{3}/0.512\, {\mathrm{mol}}\!\cdot \! {\mathrm{kg}}^{-1} Aqueous {\mathrm{K}}_{2}{\mathrm{SO}}_{4} Solutions Between 298.15 K and 323.15 K

Speeds of sound of (l-alanine/l-glutamine/glycylglycine $\,+\, 0.512\, {\mathrm{mol}}\cdot {\mathrm{kg}}^{-1}$ + 0.512 mol · kg ? 1 aqueous ${\mathrm{KNO}}_{3}/0.512\, {\mathrm{mol}}\cdot {\mathrm{kg}}^{-1}$ KNO 3 / 0.512 mol · kg ? 1 aqueous ${\mathrm{K}}_{2}{\mathrm{SO}}_{4}$ K 2 SO 4 ) systems have been measured for several molal concentrations of amino acid/peptide at different temperatures: $T$ T = (298.15 to 323.15) K. Using the speed-of-sound and density data, the parameters, partial molar isentropic compressibilities $\phi _{\kappa }^{0}$ ? κ 0 and transfer partial molar isentropic compressibilities $\Delta _{\mathrm{tr}} \phi _{\kappa }^{0}$ Δ tr ? κ 0 , have been computed. The trends of variation of $\phi _{\kappa }^{0}$ ? κ 0 and $\Delta _{\mathrm{tr}} \phi _{\kappa }^{0}$ Δ tr ? κ 0 with changes in molal concentration of the solute and temperature have been discussed in terms of zwitterion–ion, zwitterion–water dipole, ion–water dipole, and ion–ion interactions operative in the systems.     

Molecular beam epitaxy of semipolar AlN(11\bar{2}2) and GaN(11\bar{2}2) on m-sapphire

We report on the plasma-assisted molecular-beam epitaxy of semipolar $\hbox{AlN}(11\bar{2}2)$ and GaN( $11\bar{2}2$ ) films on $(1\bar{1}00)$ m-plane sapphire. AlN deposited on m-sapphire settles into two main crystalline orientation domains, $\hbox{AlN}(11\bar{2}2)$ and $\hbox{AlN}(10\bar{1}0),$ whose ratio depends on the III/V ratio. Growth under moderate nitrogen-rich conditions enables to isolate the $(11\bar{2}2)$ orientation. The in-plane epitaxial relationships of $\hbox{AlN}(11\bar{2}2)$ on m-plane sapphire are $[11\bar{2}\bar{3}]_{\rm AlN} \vert \vert [0001]_{\rm sapphire}$ and $[1\bar{1}00]_{\rm AlN} \vert \vert [11\bar{2}0]_{\rm sapphire}.$ GaN deposited directly on m-sapphire results in ( $11\bar{2}2$ )-oriented layers with ( $10\bar{1}\bar{3}$ )-oriented inclusions. A ～100 nm-thick AlN( $11\bar{2}2$ ) buffer imposes the ( $11\bar{2}2$ )-orientation for the GaN layer grown on top. By studying the Ga-desorption on GaN( $11\bar{2}2$ ), we conclude that these optimal growth conditions corresponds to a Ga excess of one monolayer on the GaN( $11\bar{2}2$ ) surface.     

Evidence for One-Gap Superconductivity in Mg(B_{1-x}C_{x})_{2} Single Crystals at x=0.132 by Point-Contact Spectroscopy

We report the results of directional point-contact measurements in Mg(B $_{1-x}$ C $_{x})_{2}$ single crystals. The amplitudes of the gaps, $\Delta_{\pi}$ and $\Delta_{\sigma}$ , were determined for each C content by fitting the experimental low-temperature normalized conductance curves of our “soft” point contacts with the BTK model generalized to the two-band case. We found that, on increasing the carbon content, $\Delta_{\sigma}$ decreases almost linearly with $T_{c}$ and $\Delta_{\pi}$ slightly increases until, at $x=0.132$ (where $T_{c}=19$ K), they assume the same value $\Delta =3.2 \pm 0.9$ meV. This result is confirmed by the temperature and magnetic-field dependence of the conductance curves at this C content, which do not show any evidence of two distinct gap values. In particular, the Δ versus T curve follows very well a standard BCS curve, with a gap ratio $2\Delta /k_{B} T_{c}=3.9$ . These experimental findings are compared to the theoretical predictions of the two-band model in the Eliashberg formulation.     

The theoretical calculation of the flow rate of granular matter from an inclined orifice

A theoretical calculation method for the flow rate of granular matter from an inclined orifice is discussed in this article and for the inclination angles at $\theta \le 90^{\circ }$ , a theoretical relation between the flow rate $Q$ and inclination angle $\theta $ is derived; and for the inclination angles at $\theta >90^{\circ }$ , a semi-theoretical relation is established. From the relations, we found that the ratio of the flow rate from a vertical orifice, $Q_{90}$ , to that from a horizontal orifice, $Q_{0}$ , is equal to the sine of the angle of repose $\theta _{\mathrm{r}}$ , i.e., $Q_{90} /Q_0 =\sin \theta _{\mathrm{r}} $ . The theoretical relations are tested by means of the experimental data and the results indicate that the theoretical calculating values are in good agreement with the experimental data over a wide range of the inclination angles. Therefore, the formula proposed in this article can be used for the theoretical calculation of the flow rate of granular matter from an inclined orifice. The relation $Q_{90} /Q_0 =\sin \theta _{\mathrm{r}}$ may be used as an alternative approach to obtaining $\theta _{\mathrm{r}}$ : measuring $Q_{90}$ and $Q_{0}$ , and then calculating $\theta _{\mathrm{r}} $ by using formula $\theta _{\mathrm{r}} =\arcsin (Q_{90} /Q_0 )$ .     

Surface Recombination Velocity Dependence on Morphological Properties of CdTe Thin Films Prepared by Close-Spaced Sublimation

Cadmium telluride (CdTe) thin films were prepared on glass substrates by employing the close-spaced sublimation technique. Different source ( $T_\mathrm{sou}$ ) and substrate temperatures ( $T_\mathrm{sub}$ ) were used in order to change the structural properties of layers. The ranges chosen were: $550\,^{\circ }\hbox {C} \le T_\mathrm{sou} \le 650\,^{\circ }\hbox {C}$ and $400\,^{\circ }\hbox {C} \le T_\mathrm{sub} \le 600\,^{\circ }\hbox {C}$ . The environment in the growing chamber was also changed with the purpose to study its influence on the crystalline properties of the surface and volume of the material. Three different surroundings were used: vacuum, high-purity argon, and high-purity oxygen. The surface recombination velocity (SRV) was calculated from photoacoustic (PA) measurements by employing the open PA cell configuration. The behavior of the experimental results was analyzed as a function of the structural characteristics of the films: texture and grain size. Scanning electron microscopy, optical absorption, X-ray diffraction, and dark resistivity measurements were also employed to analyze the properties of the CdTe films. The minimum value for the SRV was found for $T_\mathrm{sou} = 650\,^{\circ }\hbox {C},\, T_\mathrm{sub} = 600\,^{\circ }\hbox {C}$ in an oxygen ambient.     

High-field ESR on Light-Induced Transition of Spin Multiplicity in FeCo Complex

Cyanide-bridged Fe-Co complex [Fe(Tp)(CN)₃]₂Co(bpe)?5H₂O (1?5H₂O; Tp = hydro-tris(pyrazolyl)borate; bpe = 1,2-bis(4-pyridyl)ethane) shows temperature- and light- induced metal-to-metal charge transfer (MMCT) involving spin state changes between magnetic $\mathrm{Fe}^{\mathrm{III}}_{\phantom{\mathrm{III}}\mathrm{LS}}\mbox{--}\mathrm{Co}^{\mathrm{II}}_{\phantom{\mathrm{II}}\mathrm{HS}}$ (HS = high spin, LS = low spin) state and nonmagnetic $\mathrm{Fe}^{\mathrm{II}}_{\phantom{\mathrm{II}}\mathrm{LS}}\mbox{--}\mathrm{Co}^{\mathrm{III}}_{\phantom{\mathrm{III}}\mathrm{LS}}$ state, while the dehydrated material 1 does not show any MMCT and holds $\mathrm{Fe}^{\mathrm{III}}_{\phantom{\mathrm{III}}\mathrm{LS}}\mbox{--}\mathrm{Co}^{\mathrm{II}}_{\phantom{\mathrm{II}}\mathrm{HS}}$ state. We have investigated the magnetic properties of each spin state in 1 and 1?5H₂O by means of magnetization and ESR measurement under pulsed high magnetic field. At low temperature below T _N, in both 1 and 1?5H₂O, the saturation magnetization in the induced ferromagnetic phase is well explained by S and g values derived from the magnetic susceptibility study. In the ESR of 1, we observed characteristic modes corresponding to a spin excitation in the induced ferromagnetic phase where its temperature dependence shows an evolution of spin correlation in the $\mathrm{Fe}^{\mathrm{III}}_{\phantom{\mathrm{III}}\mathrm{LS}}\mbox{--}\mathrm{Co}^{\mathrm{II}}_{\phantom{\mathrm{II}}\mathrm{HS}}$ state at low temperature. We further found that the similar ESR modes grow in the light-induced state of 1?5H₂O. The results strongly suggest that the light-induced magnetization in 1?5H₂O is driven by a light-induced MMCT, which involves transition of spin multiplicity from the nonmagnetic $\mathrm{Fe}^{\mathrm{II}}_{\phantom{\mathrm{II}}\mathrm{LS}}\mbox{--}\mathrm{Co}^{\mathrm{III}}_{\phantom{\mathrm{III}}\mathrm{LS}}$ to the magnetic $\mathrm{Fe}^{\mathrm{III}}_{\phantom{\mathrm{III}}\mathrm{LS}}\mbox{--}\mathrm{Co}^{\mathrm{II}}_{\phantom{\mathrm{\mathrm{II}}}\mathrm{HS}}$ pair.     

Specific Heat of K_{0.71}Na_{0.29}Fe_2As_2 at Very Low Temperatures

A commercially available calorimeter has been used to investigate the specific heat of a high-quality K $_{0.71}$ Na $_{0.29}$ Fe $_2$ As $_2$ single crystal. The addenda heat capacity of the calorimeter is determined in the temperature range $0.02 \, \mathrm{K} \le T \le 0.54 \, \mathrm{K}$ . The data of the K $_{0.71}$ Na $_{0.29}$ Fe $_2$ As $_2$ crystal imply the presence of a large $T^2$ contribution to the specific heat which gives evidence of $d$ -wave order parameter symmetry in the superconducting state. To improve the measurements, a novel design for a calorimeter with a paramagnetic temperature sensor is presented. It promises a temperature resolution of $\Delta T \approx 0.1 \, \mathrm{\mu K}$ and an addenda heat capacity less than $200 \, \mathrm{pJ/K}$ at $ T < 100 \, \mathrm{mK}$ .     

On characteristic lengths used in notch fracture mechanics

In this paper, four kinds of characteristic length parameters used in a local notch fracture criterion are presented: (1) a characteristic length ${\uprho }_{\mathrm{c}}$ generally connecting to the notch radius, (2) a characteristic distance $\hbox {X}_{\mathrm{c}}$ considered as intrinsic to material and connected to the microstructure, (3) a critical distance $\hbox {d}_{0}$ considered as intrinsic to material and connected to the fracture process zone, (4) an effective distance $\hbox {X}_{\mathrm{ef}}$ considered as a characteristic of the stress distribution. Each approach is discussed. The paper ends with the author’s opinion about the different methods.     

Cryptanalysis of a key exchange protocol based on the endomorphisms ring End{(\mathbb{Z}_{p} \times \mathbb{Z}_{p^2})}

Climent et?al. (Appl Algebra Eng Commun Comput 22:91?C108, 2011) identified the elements of the endomorphisms ring End ${(\mathbb{Z}_p \times \mathbb{Z}_{p^2})}$ with elements in a set, E _p , of matrices of size 2?× 2, whose elements in the first row belong to ${\mathbb{Z}_{p}}$ and the elements in the second row belong to ${\mathbb{Z}_{p^2}}$ . By taking advantage of matrix arithmetic, they proposed a key exchange protocol using polynomial functions over E _p defined by polynomials in ${\mathbb{Z}[X]}$ . In this note, we show that this protocol is insecure; it can be broken by solving a set of 10 consistent homogeneous linear equations in 8 unknowns over ${\mathbb{Z}_{p^2}}$ .     

Magnetic Properties of Nanocrystalline Nickel–Cobalt Ferrites (\mathrm{Ni}_{1/2}{\mathrm{{Co}}}_{1/2}{\mathrm{{Fe}}}_{2}{\mathrm{O}}_{4})

In this study, the nanocrystalline nickel–cobalt ferrites $(\mathrm{Ni}_{1/2}\mathrm{Co}_{1/2}\mathrm{Fe}_{2}\mathrm{O}_{4})$ were prepared via the citrate route method at $27\,^{\circ }\mathrm{C}$ . The samples were calcined at $300\,^{\circ }\mathrm{C}$ for 3 h. The crystalline structure and the single-phase formations were confirmed by X-ray diffraction (XRD) measurements. Prepared materials showed the cubic spinel structure with m3m symmetry and Fd3m space group. The analyses of XRD patterns were carried out using POWD software. It gave an estimation of lattice constant “ $a$ ” of 8.3584 Å, which was in good agreement with the results reported in JCPDS file no. 742081. The crystal size of the prepared materials calculated by Scherer’s formula was 27.6 nm and the electrical conductivity was around $10^{-5}~\mathrm{S}\,\cdot \, \mathrm{m}^{-1}$ . The permeability component variations with frequency were realized. The magnetic properties of the prepared materials were analyzed by a vibrating sample magnetometer (VSM). It showed a saturation magnetization of $27.26\,\mathrm{emu} \cdot \mathrm{m}^{-1}$ and the behavior of a hard magnet.     

Vorhersage der thermischen Strahlung großer Kohlenwasserstoff- und Peroxid-Poolfeuer mit CFD Simulation

Flame temperatures (T), surface emissive powers (SEP) and irradiances (E) of large-scale JP-4 pool fires (d=2, 8, 16, 25 m) and di-tert-butyl peroxide (DTBP) pool fires (d=1.12 m, 3.4 m) are investigated experimentally and by CFD simulation. As experimental methods an infrared thermographic camera system with video-mixing unit is used for the determination of T, SEP and an ellipsoidal radiometer for the determination of E. The maximum frequency of time-averaged emission temperatures for JP-4 pool fire (d=16 m) are in a range of $ 793\,\mathrm{K} < \overline{T} < 1033$ and for DTBP pool fire (d=1.12 m) are a range of $ 1040\,\mathrm{K} < \overline{T} < 1480\,\mathrm{K}$ . For DTBP pool fire (d=1.12 m), the measurements result in $ \overline{\text{SEP}}\approx 130\,\mathrm{kW/m^{2}}$ which is up to a factor of ≈6 larger in comparison to hydrocarbon pool fires (d≈1 m). In a case of DTBP pool fire (d=3.4 m) with $ \overline{\text{SEP}} \approx 250\,\mathrm{kW/m^{2}}$ this factor is ≈5 compared to $ \overline{\text{SEP}} \approx 50\,\mathrm{kW/m^{2}}$ of LNG pool fire (d=4 m). By increasing the relative distance ?y/d from the pool rim, measured time averaged irradiances $ \overline{E}$ (?y/d) decrease and agree well with CFD predicted $ \overline{E}_{\text{CFD}}$ (?y/d). Also, there is a good agreement between the measured time averaged $ \overline{T}$ and $ \overline{\text{SEP}}$ of hydrocarbons and DTBP pool fires, with the predicted $ \overline{T}_{\text{CFD}}$ and $ \overline{\text{SEP}}_{\text{CFD}}$ values. The possibilities and nowadays limitations of CFD simulation of large pool fires are discussed. This study has shown that the risk potential of accidental pool fires referring to thermal radiation can be predicted much better than in the past.     

Experimental Measurements of Thermophysical Properties of \mathrm{Al}_{2}\mathrm{O}_{3}– and \mathrm{TiO}_{2}–Ethylene Glycol Nanofluids

This paper presents measurements of the thermal conductivity and the dynamic viscosity of $\mathrm{Al}_{2}\mathrm{O}_{3}$ Al 2 O 3 –ethylene glycol and $\mathrm{TiO}_{2}$ TiO 2 –ethylene glycol (1 % to 3 % particle volume fraction) nanofluids carried out in the temperature range from $0\,^{\circ }$ 0 ° C to $50\,^{\circ }$ 50 ° C. The thermal-conductivity measurements were performed by using a transient hot-disk TPS 2500S apparatus instrumented with a 7577 probe (2.001 mm in radius) having a maximum uncertainty $(k=2)$ ( k = 2 ) lower than 5.0 % of the reading. The dynamic-viscosity measurements and the rheological analysis were carried out by a rotating disk type rheometer Haake Mars II instrumented with a single-cone probe (60 mm in diameter and $1^{\circ }$ 1 ° ) having a maximum uncertainty $(k=2)$ ( k = 2 ) lower than 5.0 % of the reading. The thermal-conductivity measurements of the tested nanofluids show a great sensitivity to particle volume fraction and a lower sensitivity to temperature: $\mathrm{TiO}_{2}$ TiO 2 –ethylene glycol and $\mathrm{Al}_{2}\mathrm{O}_{3}$ Al 2 O 3 –ethylene glycol nanofluids show a thermal-conductivity enhancement (with respect to pure ethylene glycol) from 1 % to 19.5 % and from 9 % to 29 %, respectively. $\mathrm{TiO}_{2}$ TiO 2 –ethylene glycol and $\mathrm{Al}_{2}\mathrm{O}_{3}$ Al 2 O 3 –ethylene glycol nanofluids exhibit Newtonian behavior in all the investigated temperature and particle volume fraction ranges. The relative viscosity shows a great sensitivity to the particle volume fraction and weak or no sensitivity to temperature: $\mathrm{TiO}_{2}$ TiO 2 –ethylene glycol and $\mathrm{Al}_{2}\mathrm{O}_{3}$ Al 2 O 3 –ethylene glycol nanofluids show a dynamic viscosity increase with respect to ethylene glycol from (4 to 5) % to 30 % and from 14 % to 50 %, respectively. Present experimental measurements were compared both with available measurements carried out by different researchers and computational models for thermophysical properties of nanofluids.     

Dislocation structure at a \{ {\overline{1} 2\overline{1} 0} \}/ {\langle} 10\overline{1} 0 {\rangle} low-angle tilt grain boundary in LiNbO3

LiNbO₃ is a ferroelectric material with a rhombohedral R3c structure at room temperature. A LiNbO₃ bicrystal with a $ \{ {\overline{1} 2\overline{1} 0} \}/ {\langle}10\overline{1} 0{\rangle}$ 1° low-angle tilt grain boundary was successfully fabricated by diffusion bonding. The resultant boundary was then investigated using high-resolution TEM. The boundary composed a periodic array of dislocations with $ b = { 1}/ 3{\langle} \overline{1} 2\overline{1} 0{\rangle} $ . They dissociated into two partial dislocations by climb. A crystallographic consideration suggests that the Burgers vectors of the partial dislocations should be $ 1/ 3{\langle}01\overline{1} 0{\rangle} $ and $ 1/ 3{\langle}\overline{1} 100{\rangle} $ , and a stacking fault on $ \{ {\overline{1} 2\overline{1} 0} \} $ is formed between the two partial dislocations. From the separation distance of a partial dislocation pair, a stacking fault energy on $ \{ {\overline{1} 2\overline{1} 0} \} $ was estimated to be 0.25?J/m² on the basis of isotropic elasticity theory.     

On quasi-cyclic codes over {\mathbb{Z}_q}

Quasi-cyclic (QC) codes are a remarkable generalization of cyclic codes. Many QC codes have been shown to be best for their parameters. In this paper, some structural properties of QC codes over the prime power integer residue ring ${\mathbb{Z}_q}$ are considered. An l-QC code of length lm over ${\mathbb{Z}_q}$ is viewed both as in the conventional row circulant form and also as a ${\frac{\mathbb{Z}_q[x]}{\langle x^m-1 \rangle}}$ -submodule of ${\frac{GR(q,l)[x]}{\langle x^m-1 \rangle}}$ , where GR(q, l) is the Galois extension ring of degree l over ${\mathbb{Z}_q}$ . A necessary and sufficient condition for cyclic codes over Galois rings to be free is obtained and a BCH type bound for them is also given. A sufficient condition for 1-generator QC codes to be ${\mathbb{Z}_q}$ -free is given and a formula to evaluate their ranks is derived. Some distance bounds for 1-generator QC codes are also discussed. The duals of QC codes over ${\mathbb{Z}_q}$ are also briefly discussed.     

Nuclear Spin Relaxation Characteristic of Submonolayer ^3He Films in Nanochannels

In order to obtain information on dynamics of helium films in the nondegenerate fluid region, we have performed a pulsed-NMR experiment at 3.29 MHz on $^3$ He films adsorbed in straight 2.4 nm channels of FSM silicates down to 0.54 K. In general, the spin-lattice and spin-spin relaxation times $T_1$ and $T_2$ were explained in terms of the two-dimensional Bloembergen–Purcell–Pound model for dipolar relaxation. Temperature dependences of $T_1$ in submonolayer $^3$ He films show a minimum, indicating that the dipolar-field correlation time $\tau _\mathrm {c}$ is about $\omega ^{-1}=4.8\times 10^{-8}$ s. The temperature $T_\mathrm {min}$ of the $T_1$ minimum monotonically lowers with increasing coverage, suggesting that $^3$ He adatoms become more mobile at higher coverages. The low-dimensional property of $^3$ He adatoms is observed as the separation of $T_1$ and $T_2$ above $T_\mathrm {min}$ where $\omega \tau _\mathrm {c}<1$ . On the other hand, several features specific to films in the nanochannel geometry were also found. Especially, the temperature dependence of $T_2$ becomes very small just below $T_\mathrm {min}$ and shows a shoulder at lower temperatures. This anomaly has not been observed in $^3$ He adsorbed in wider pores or on flat surfaces, so that it is considered to be characteristic of $^3$ He films confined in narrow channels with a diameter of a few nm.     

Influence of pH and bath composition on properties of Ni–Fe alloy films synthesized by electrodeposition

Fe?CNi films were electrodeposited on ITO glass substrates from the electrolytes with different molar ratio of Ni $^{\boldsymbol{2+}}$ /Fe $^{\boldsymbol{2+}}$ and different pH values (2 $\boldsymbol{\cdot}$ 1, 2 $\boldsymbol{\cdot}$ 9, 3 $\boldsymbol{\cdot}$ 7 and 4 $\boldsymbol{\cdot}$ 3) at 25 $\boldsymbol{^\circ}$ C. The properties of Fe?CNi alloy films depend on both Ni $^{\boldsymbol{2+}}$ and Fe $^{\boldsymbol{2+}}$ concentrations in electrolyte and pH values. The content of Ni increases from 38% to 84% as the mole ratio of NiSO $_{\boldsymbol{4}}$ /FeSO $_{\boldsymbol{4}}$ increasing from 0 $\boldsymbol{\cdot}$ 50/0 $\boldsymbol{\cdot}$ 50 to 0 $\boldsymbol{\cdot}$ 90/0 $\boldsymbol{\cdot}$ 10 in electrolyte and slightly decreases from 65% to 42% as the pH values increase from 2 $\boldsymbol{\cdot}$ 1 to 4 $\boldsymbol{\cdot}$ 3. The X-ray diffraction analysis reveals that the structures of the films strongly depend on the Ni content in the binary films. The magnetic performance of the films shows that the saturation magnetization ( $\boldsymbol{M}_{\boldsymbol{\rm s}})$ decreases from 1775 $\boldsymbol{\cdot}$ 01 emu/cm $^{\boldsymbol{3}}$ to 1501 $\boldsymbol{\cdot}$ 46 emu/cm $^{\boldsymbol{3}}$ with the pH value increasing from 2 $\boldsymbol{\cdot}$ 1 to 4 $\boldsymbol{\cdot}$ 3 and the saturation magnetization ( $\boldsymbol{M}_{\boldsymbol{\rm s}})$ and coercivity ( $\boldsymbol{H}_{\boldsymbol{\rm c}})$ move up from 1150 $\boldsymbol{\cdot}$ 44 emu/cm $^{\boldsymbol{3}}$ and 58 $\boldsymbol{\cdot}$ 86 Oe to 2498 $\boldsymbol{\cdot}$ 88 emu/cm $^{\boldsymbol{3}}$ and 93 $\boldsymbol{\cdot}$ 12 Oe with the increase of Ni $^{\boldsymbol{2+}}$ concentration in the electrolyte, respectively.     

Mass transfer through a single grain boundary in alumina bicrystals under oxygen potential gradients

The mass-transfer behavior through grain boundaries (GBs) in alumina was systematically investigated using four types of alumina bicrystals. The alumina bicrystal wafers were exposed to the constant oxygen potential gradient $ \left( {\Updelta P_{{{\text{O}}_{ 2} }} } \right) $ generated by the combination of two different oxygen partial pressures $ P_{{{\text{O}}_{ 2} }} \left( {\text{II}} \right) $ and $ P_{{{\text{O}}_{ 2} }} \left( {\text{I}} \right) $ of 10⁵ and 1?Pa, respectively, at 1923?K. Ridges were formed along the GBs on the surface subjected to $ P_{{{\text{O}}_{ 2} }} \left( {\text{II}} \right) $ , and deep GB ditches were developed on the $ P_{{{\text{O}}_{ 2} }} \left( {\text{I}} \right) $ surface mainly during the migration of aluminum thorough GBs from the $ P_{{{\text{O}}_{ 2} }} \left( {\text{I}} \right) $ surface to $ P_{{{\text{O}}_{ 2} }} \left( {\text{II}} \right) $ surface. The surface morphology changes in the vicinity of the GBs were observed by atomic force microscopy. It was found that the surface morphology changes indicative of the aluminum GB diffusion were strongly dependent on the GB characteristics. The GB diffusion coefficients of aluminum estimated from the volume of the GB ridges showed a clear correlation to the local bonding environments of GB cores estimated from theoretical calculations reported previously.     

Elastic Properties of Monoclinic \hbox {ZrO}_{2} at Finite Temperatures Via First Principles

The structural and elastic properties of orthorhombic $\hbox {ZrO}_{2}\,(m\hbox {-ZrO}_{2})$ as a function of temperature are investigated by the generalized gradient approximation (GGA) correction scheme in the framework of density functional theory (DFT) and the quasi-harmonic Debye model. The thirteen independent elastic constants of $m\hbox {-ZrO}_{2}$ at temperatures to 3200 K are theoretically investigated for the first time. It is found that with increasing temperature, all elastic constants change, especially $C_{35}\hbox { and }C_{25}$ change rapidly in the temperature range of 1400 K to 1600 K and 2200 K to 2600 K, respectively. We also obtain the bulk modulus $B$ , shear modulus $G$ , Young’s moduli $E$ , as well as Poisson’s ratio $\sigma $ of $m\hbox {-ZrO}_{2}$ at high temperatures. Our work suggests that it is very important to predict the melting properties of materials via the elastic constants at temperatures.