共查询到19条相似文献,搜索用时 203 毫秒
1.
2.
介绍了金属磁记忆检测方法的原理,并对其与其他无损检测方法相比较的优点进行了论述,还通过实例进一步说明金属磁记忆检测方法的应用,以促进无损检测技术的发展。 相似文献
3.
4.
磁记忆检测技术(MMT)是基于金属材料磁记忆效应的一种无损检测技术。本文分析了磁记忆的应力检测机理,列举了MMT在钢结构焊缝中的应用实例,说明了磁记忆检测技术的有效性。并且还指出了该项技术的最大优点,即通过MMT既可检测出宏观缺陷,又可检测出微观缺陷,并能进行未来的危险预报。 相似文献
5.
缆索体系作为现代土木建设广泛应用结构之一,作为主要承载部件对整体结构的安全性和使用寿命至关重要。磁致伸缩导波无损检测技术在缆索损伤和腐蚀检测方面具有检测长度大,覆盖结构区域广等优势,逐渐成为应用广泛的缆索新型无损检测方法。磁致伸缩导波无损检测技术在损伤和腐蚀的定性问题上已经比较稳定,缺陷尺寸和缺陷回波的定量关系与诸多因素有关,本文对缆索的基本单元高强钢丝的缺口检测信号进行了实验研究,得到缺陷回波反射系数与钢丝缺陷截面损失率的关系,发现其与抛物线非常近似;本研究为钢丝及钢丝拉索的损伤和腐蚀磁致伸缩导波无损检测的定量评价提供了基础。 相似文献
6.
缆索体系作为现代土木建设广泛应用结构之一,作为主要承载部件对整体结构的安全性和使用寿命至关重要。目前可用于缆索体系检测方法主要有视觉检测、索力测量法、声发射、射线、磁性、超声、磁致伸缩导波检测等;本文对上述检测方法进行简要论述和对比的基础上,指出磁致伸缩导波无损检测技术由于具有检测长度大,覆盖结构区域广,可检测远离检测仪器难以到达的区域,无需开挖或拆除包覆层、防腐层等独特的优势,逐渐成为应用广泛的缆索新型无损检测方法。本文对磁致伸缩导波检测原理、传感器、检测实验研究和仪器开发及其应用进行了总结回顾,并对该技术现阶段研究难点和热点以及未来研究趋势进行了归纳总结。 相似文献
7.
8.
为了解决输油管道运营中管道腐蚀问题,需定期对输油管道进行无损检测,采用小波变换的方法处理漏磁信号,分析探讨了漏磁检测的原理,指出采用小波变换中的Mallat算法可以有效地对漏磁信号进行处理,使信号便于储存和分析。 相似文献
9.
介绍了曳引钢带的结构与应用优势,应用优势包括使用安全性高、使用寿命长、运行舒适性好、后续维护方便等。分析了曳引钢带的失效特征,以及加工工艺、安装工艺对曳引钢带性能的影响。探讨了应用多磁轭励磁装置对曳引钢带进行无损检测的方法。试验结果表明,多磁轭励磁装置的无损探伤检测技术能够满足曳引钢带的检测要求。 相似文献
10.
在磁法和电法勘探原理的基础上进行深入研究与实践,提出对灌注桩钢筋笼长度的两种无损检测方法,即磁测法和电测法.并在实际工程中加以应用。 相似文献
11.
通过对电梯钢丝绳传统检测方法与无损检测方法的比较,突出无损检测在钢丝绳定量、定性分析中的优势。基于安全工程的理论方法,结合各标准及无损检测的方法,给出了钢丝绳风险评估的具体原则和具体程序,并在上海100多台老旧电梯钢丝绳风险评估中得到很好的应用。 相似文献
12.
通过介绍国内外大跨桥梁结构损伤识别方法的研究进展,对人工检测、振动模态检测、无损检测、概率统计方法检测四种大跨桥梁结构损伤识别方法进行了分析和总结,为我国大跨桥梁结构施工企业在大跨桥梁结构施工方面的进一步发展提供借鉴和参考。 相似文献
13.
14.
15.
16.
17.
岩土工程锚杆检测技术发展现状 总被引:1,自引:0,他引:1
在岩土工程中,锚杆支护技术应用较广。因此,对于锚杆施工质量检测要求较高。本文综述了目前国内外锚杆施工质量检测技术,为进一步研究更为先进的锚杆无损检测技术打下一定基础。 相似文献
18.
Rosemarie Helmerich Boris Milmann Jens Wöstmann 《Structure and Infrastructure Engineering》2015,11(1):3-14
For almost 15 years, carbon fibre-reinforced polymer (CFRP) plates and sheets have been used for strengthening and repair of civil engineering structures. CFRP plates were applied to upgrade structures for change in use or increasing traffic load. CFRP laminates have also been used to repair deteriorated structures such as multi-storey parking or bridges. The execution quality and condition of the strengthening measure in terms of bond integrity were neither monitored nor tested systematically. Inspectors eventually applied simple hammer knocking during regular main inspection for subjective noise distinction as a measure for eventual insufficient bond. This paper presents the feasibility and the limitations of low-frequency transversal ultrasonic waves with dry-coupling point-contact sensors for inspection and defect detection between CFRP laminate and concrete surfaces. The German Centre of Competence in Civil Engineering (DIBt) has initiated a national research project [Helmerich et al. (2012). Condition analysis of bonded CFRP-applications on concrete structures by means of non-destructive testing [in German: Zustandsuntersuchung von CFK-Klebeverstärkungen an Betonbauteilen mittels zerstörungsfreier Prüfung (ZfP)]. Final, internal project report], carried out at the Federal Institute for Materials Research and Testing (BAM), Germany. The aim of the project was to present a potential non-destructive testing method for bond defect detection as a measure for the durability of the strengthening system more than 10 years after application. 相似文献
19.
M. D. Beard M. J. S. Lowe 《International Journal of Rock Mechanics and Mining Sciences》2003,40(4):527-536
The research outlined in this paper is aimed at the development of a portable non-destructive testing instrument for evaluating the condition of rock bolts. In applications such as coal mine roof reinforcement, the opportunities for rock bolt inspection are currently limited to destructive techniques such as the pull-out test. It is proposed that guided ultrasonic waves can be used to solve this inspection problem, using a pulse-echo test carried out from the free end of the bolt. Suitable test frequencies have been identified through the use of modelling software, and successful laboratory and site trials have been undertaken. The research has shown that the proposed approach is capable of determining the bolt length, and of identifying major defects such as necking, deformation, and loss of resin encapsulation. 相似文献