Trace element levels in honeys from different regions of Turkey

A survey of 25 honey samples from different botanical origin, collected all over the Turkey was conducted to assess their trace element contents. The aim of this study was to determine the levels of cadmium (Cd), lead (Pb), iron (Fe), manganese (Mn), copper (Cu), nickel (Ni), chromium (Cr), zinc (Zn), aluminium (Al) and selenium (Se) in honey samples from different regions of Turkey. Trace element contents were determined by a flame and graphite furnace atomic absorption spectrometry technique after dry-ashing, microwave digestion and wet-digestion. The accuracy of the method was corrected by the standard reference material, NIST-SRM 1515 Apple leaves. The contents of trace elements in honey samples were in the range of 0.23–2.41 μg g⁻¹, 0.32–4.56 μg g⁻¹, 1.1–12.7 μg g⁻¹, 1.8–10.2 μg g⁻¹, 8.4–105.8 μg kg⁻¹, 2.6–29.9 μg kg⁻¹, 2.4–37.9 μg kg⁻¹, 0.9–17.9 μg kg⁻¹, 83–325 μg kg⁻¹ and 38–113 μg kg⁻¹ for Cu, Mn, Zn, Fe, Pb, Ni, Cr, Cd, Al and Se, respectively. Iron was the most abundant element while cadmium was the lowest element in the Turkish honeys surveyed. The results showed that trace element concentrations in the honeys from different regions were generally correlated with the degree of trace element contamination of the environment.     

Molecularly imprinted solid-phase extraction coupled to liquid chromatography for determination of Sudan dyes in preserved beancurds

New molecularly imprinted microspheres synthesized by suspension polymerisation using phenylamine and naphthol as mimic template were successfully applied as selective sorbents for the solid-phase extraction used for the simultaneous determination of four Sudan dyes from preserved beancurd products. The obtained imprinted microspheres showed good recognition and selectivity to the four Sudan dyes in aqueous solution and the affinity could be easily controlled by adjusting the property of the solution. Under the selected experimental condition, the recoveries of the Sudan dyes in preserved beancurds at three spiked levels were ranged between 90.2-104.5% with the relative standard deviation of less than 6.8%. The limit of detection (LOD) and limit of quantification (LOQ) based on a signal-to-noise of 3 and 10 were in the range of 0.005-0.009 μg g⁻¹ and 0.015-0.030 μg g⁻¹, respectively. Comparing with alumina and C₁₈-based extraction, the selectivity and repeatability of molecularly imprinted solid-phase extraction (MISPE) were obviously improved. This method could be potentially applied for the determination of Sudan dyes in complicated food samples.     

Determination of trace elements in Croatian floral honey originating from different regions

The concentrations of As, Cd, Cu, Hg and Pb were determined in 54 multi-floral honey samples collected from five regions of Croatia during 2009 and 2010. Element contents decreased in the following order: Cu > Pb > As > Hg > Cd. Significant differences in lead and copper levels were observed between regions. Mean levels of elements (μg kg⁻¹) in all honey samples measured were: 19.7 for As, 1.51 for Cd, 1074 for Cu, 2.72 for Hg and 65.2 for Pb. Copper and lead were the most abundant elements in the Centre region, with range and mean contents of 108–41,271 and 3232 μg kg⁻¹ and 22.0–440 and 131 μg kg⁻¹, respectively. The highest element contents were: As 23.8 μg kg⁻¹ in the South region, Cd 2.11 μg kg⁻¹ in the Southwest region and Hg 2.63 μg kg⁻¹ in the Northeast region. The finding that lead contents in Croatian honey were higher than most reported lead levels in honey from other European countries is of particular concern. These indicate that attention must be focused on setting positions for honey production hives in areas distant from highways and railways.     

A novel method for pesticide analysis in refined sugar samples using a gas chromatography–mass spectrometer (GC–MS/MS) and simple solvent extraction method

A sensitive method for the quantification of 11 pesticides in sugar samples to the μg kg⁻¹ level has been developed. These pesticides are often used in an agricultural context. A simple solvent extraction followed by selective analysis using a gas chromatography–mass spectrometric method was used. This method was accurate (?99%) as it possesses limits of detection in the 0.1-μg kg⁻¹ range, and the coefficients of variations are less than 15% at the low μg kg⁻¹ end of the method’s linear range. The percent recovery of all the pesticides at the lowest levels of detection ranges from 82% to 104%. This method was used for the quantification of pesticides in sugar samples collected from different factory outlets from different parts of India. In this study, 27 refined sugar samples were analysed in which one sample showed a detectable level of the chlorpyrifos pesticide. This study showed that Indian sugar is free from the commonly-used pesticides at the low μg kg⁻¹ levels.     

Validation of antibiotics in catfish by on-line solid phase extraction coupled to liquid chromatography tandem mass spectrometry

For the first time automated on-line solid phase extraction coupled to liquid chromatography tandem mass spectrometry was developed for the simultaneous determination of 13 antibiotics (sulfonamides and tetracyclines) in catfish. The method proposed was validated according to Commission Decision 2002/657/EC, showing good linearity between 2 and 350 μg kg⁻¹, high recovery (80–99%) and reproducibility (13–20%) values, lower detection limits than 0.1 μg kg⁻¹, and quantification limits under 2.4 μg kg⁻¹ (between 39 and 84 times lower than the MRL fixed by the EU). Moreover, the proposed method was also used to determine sulfonamides and tetracyclines in 16 out of 107 samples, all previously analysed by microbiological screening that gave positive results. Five out of 13 antibiotics were found, having tetracycline the higher occurrence (10 samples); in all cases the concentrations were lower than the MRL established.     

Sample preparation method for the analysis of some organophosphorus pesticides residues in tomato by ultrasound-assisted solvent extraction followed by dispersive liquid–liquid microextraction

A very simple and economic method for organophosphorus pesticides (OPPs) residues analysis in tomato by means of gas chromatography–flame photometric detection (GC–FPD) has been developed. The method involves a rapid and small-scale extraction. The sample was homogenised and extraction of the OPPs with acetone was carried out assisted by sonication. No clean-up or evaporation were required after extraction. Pre-concentration of the OPPs from the acetone extract was done by using dispersive liquid–liquid microextraction (DLLME) technique. Chlorobenzene was added in micro-level volume as extraction solvent and triphenylphosphate as internal standard in DLLME procedure. The method showed good linearity over the range assayed (0.5–1000 μg kg⁻¹) and the detection limits for the pesticides studied varied from 0.1 to 0.5 μg kg⁻¹. Repeatability studies resulted a relative standard deviation lower than 10% in all cases. The proposed method was used to determine pesticides levels in tomatoes grown in open field.     

Determination of ultratrace levels of selenium in fruit and vegetable samples grown and consumed in Portugal

The selenium content in fruit and vegetable samples from two regions in Portugal were analysed using hydride generation atomic fluorescence spectrometry (HG-AFS) and radiochemical nuclear activation analysis (RNAA) – two analytical methods with very low limits of detection. The lower detection limits of HG-AFS, 3 μg kg⁻¹ and 8 μg kg⁻¹ (according to conditions used for digestion), and for RNAA, 10 μg kg⁻¹, meant that it was possible to determine selenium in samples previously analysed using the replicate sample instrumental nuclear activation analysis (RSINAA) with a higher detection limit associated.     

Simplified pesticide multiresidues analysis in fish by low-temperature cleanup and solid-phase extraction coupled with gas chromatography/mass spectrometry

A simple and fast method for the simultaneous analysis of thiobencarb, deltamethrin and 19 organochlorine pesticide residues in fish by gas chromatography–mass spectrometry was investigated in this study. Samples are extracted with acetonitrile. Most of lipids in the extract are eliminated by low-temperature cleanup, prior to solid-phase extraction cleanup. The lipids extracted from the fish samples were easily removed without any significant losses of the pesticides. Aminopropyl (NH₂) cartridge was effective to eliminate the remaining interference. Spiked experiments were carried out to determine the recovery, precision and limits of detection (LODs) of the method. The method detection limits ranged from 0.5 μg kg⁻¹ to 20 μg kg⁻¹, whilst recoveries of the pesticides were in the range of 81.3–113.7% with relative standard deviations ?13.5% at a spiked concentration of 0.05 mg kg⁻¹, 0.02 mg kg⁻¹ and 0.1 mg kg⁻¹. The newly developed method is demonstrated to give efficient recoveries and LODs for detecting pesticide multiresidues in fish.     

Multiresidue method for analysis of pesticides in pepper and tomato by gas chromatography with nitrogen–phosphorus detection

An analytical multiresidue method for the simultaneous determination of various classes of pesticides in vegetables (pepper and tomato) was developed. Vegetable samples are extracted with acetone and the pesticides are partitioned into ethyl acetate/cyclohexane. Final determination was made by gas chromatography with nitrogen–phosphorus detection. Confirmation analysis of pesticides was carried out by gas chromatography coupled with mass spectrometry in the selected ion monitoring (SIM) mode. The identification of compounds was based on retention time and on comparison of the primary and secondary ions. Recovery studies were performed at 0.05, 0.1 and 0.02 mg kg⁻¹ fortification levels of each compound and the recoveries obtained ranged from 70.1% to 128.5% with relative standard deviations lower than 7%. The method showed good linearity over the range assayed 50–1500 μg l⁻¹ and the detection and quantification limits for the pesticides studied varied from 0.1 to 4.4 μg kg⁻¹ and 0.4 to 14.5 μg kg⁻¹, respectively. The proposed method was used to determine pesticides levels in peppers and tomatoes grown in experimental greenhouses.     

Residue levels of food-grade antioxidants in postharvest treated in-pod peanuts during five months of storage

In order to investigate residue levels of butylated hydroxyanisole (BHA), propyl paraben (PP) and butylated hydroxytoluene (BHT) during storage, eight-hundred kilograms of bulk peanuts were treated with the following antioxidant emulsions: BHA (1802 μg g⁻¹), BHA–PP (1802 μg g⁻¹ + 1802 μg g⁻¹) M1 and BHA–PP–BHT mixtures (1802 μg g⁻¹ + 901 μg g⁻¹ + 2204 μg g⁻¹) M2 and (1802 μg g⁻¹ + 1802 μg g⁻¹ + 2204 μg g⁻¹) M3. Residues were determined in peanut pod and seed tissues at 1-month intervals during the storage. While the reduction levels of BHA and PP in pods at the end of the storage period ranged from 66% to 76%, BHT levels were decreased extensively (86%). Twenty-four hours after peanuts were treated, antioxidant emulsions effectively seeped into the seeds and low levels of these chemicals were detected during the assay. Residues of PP in seeds were lower (62%) than the other antioxidants. Although the doses used were higher than those approved for food-grade antioxidants in stored peanuts, the residue levels in seeds (32.8–0.02 μg g⁻¹) did not exceed the maximum residue limits during the storage period.     

Effect of modifiers for As,Cu and Pb determinations in sugar-cane spirits by GF AAS

Palladium plus magnesium nitrates with and without Ir, Ru and W were evaluated for the simultaneous determination of As, Cu and Pb in cachaça by graphite furnace atomic absorption spectrometry. For 20 μL of sample, 5 μL Pd(NO₃)₂ and 3 μL Mg(NO₃)₂ dispensed together onto the Ir-coated platform of the THGA, analytical curves in the 0–30.0 μg L⁻¹ As, 0–1.50 mg L⁻¹ Cu and 0–60.0 μg L⁻¹ Pb were built up and typical linear correlation coefficients were always better than 0.999. The limit of detection was 1.30 μg L⁻¹ As, 140 μg L⁻¹ Cu and 0.90 μg L⁻¹ Pb. As, Cu and Pb contents in 10 cachaça samples agreed with those obtained by ICP-MS. Recoveries of spiked samples varied from 96% to 106% (As), 97% to 112% (Cu) and 92% to 108% (Pb). The relative standard deviation (n = 12) was typically 2.7%, 3.3% and 1.9%.     

Determination of selenium in selected food samples from Argentina and estimation of their contribution to the Se dietary intake

An optimised FI-HGAAS method was applied to determine the total selenium concentrations in selected high consumption food (fish, beef, chicken, milk, rice, wheat flour, egg) and to estimate their contribution to the Argentinean dietary intake, whose information is scarce nowadays. Through several optimisation steps a suitable method was achieved showing satisfactory figures of merit for all matrices. Average recovery was 96%, RSD < 5%, LODs ranged 2.0–7.0 μg kg⁻¹ and the accuracy was assessed using DOLT-3 NRC certified reference material. Meat and eggs showed the highest values (in μg kg⁻¹, beef: 42–153; chicken: 62–205; fish: 94–314; canned tuna: 272–282; eggs: 134–217), minor values were found for wheat flour (22–42), rice: (<22), pasta (47–64) and milk (<7–9). An estimated intake of 32 and 24 μg day⁻¹ for adult men and women, respectively, suggested a deficient Se intake, leading to further comprehensive surveys of Se occurrence in Argentina.     

Determination of Ge(IV) in rice in a mercury-coated glassy carbon electrode in the presence of catechol

Electrochemical adsorptive cathodic stripping voltammetry determination of Ge(IV) using the catechol complex on a mercury-coated (MC) electrode was prepared using a glassy carbon electrode (GCE), the peak potential of which was −0.5 V vs. Ag/AgCl on MCGCE. The various parameters of the catechol concentration, its pH, and others were optimized. The linear working ranges were obtained in the concentration of 2–700 μg L⁻¹ Ge(IV). The relative standard deviation at the Ge(IV) concentration of 50 μg L⁻¹ was 1.37% (n = 15) using the optimum condition, and the detection limit was found to be 0.6 μg L⁻¹ (8.26 × 10⁻⁹ M) (S/N = 3), with an adsorption time of 180 s. The Ge(IV) response was highly linear. This developed method was applied to Ge(IV) to determine the presence of rice grains.     

Simultaneous derivatisation and preconcentration of parabens in food and other matrices by isobutyl chloroformate and dispersive liquid–liquid microextraction followed by gas chromatographic analysis

A simple, rapid and economical method has been proposed for the quantitative determination of parabens (methyl, ethyl, propyl and butyl paraben) in different samples (food, cosmetics and water) based on isobutyl chloroformate (IBCF) derivatisation and preconcentration using dispersive liquid–liquid microextraction in single step. Under optimum conditions, solid samples were extracted with ethanol (disperser solvent) and 200 μL of this extract along with 50 μL of chloroform (extraction solvent) and 10 μL of IBCF was rapidly injected into 2 mL of ultra-pure water containing 150 μL of pyridine to induce formation of a cloudy state. After centrifugation, 1 μL of the sedimented phase was analysed using gas chromatograph-flame ionisation detector (GC–FID) and the peaks were confirmed using gas chromatograph-positive chemical ionisation-mass spectrometer (GC–PCI–MS). Method was found to be linear over the range of 0.1–10 μg mL⁻¹ with square of correlation coefficient (R²) in the range of 0.9913–0.9992. Limit of detection (LOD) and limit of quantification (LOQ) were found to be 0.029–0.102 μg mL⁻¹ and 0.095–0.336 μg mL⁻¹ with a signal to noise ratio of 3:1 and 10:1, respectively.     

Determination of patulin in fruit juices using HPLC-DAD and GC-MSD techniques

A high performance liquid chromatography with a diode-array detector (HPLC-DAD) and a gas chromatography with a mass spectrometer (GC-MSD) are described for the determination of patulin (PAT) in apple juice. The limits of detection (DL) and quantification (QL) for the HPLC-DAD and GC-MSD method were found to be (DL = 0.23 μg kg⁻¹ QL = 1.2 μg kg⁻¹) and (DL = 5.8 μg kg⁻¹ and QL = 13.8 μg kg⁻¹), respectively. The recovery factors for HPLC-DAD and GC-MSD were found to be 99.5% (RSD% = 0.73) and 41% (RSD% = 10.03), respectively. The HPLC-DAD method was used to determine the occurrence of PAT in 90 samples of fruit juices.     

Analysis of multi-pesticide residues in the foods of animal origin by GC–MS coupled with accelerated solvent extraction and gel permeation chromatography cleanup

A new analytical method was developed to simultaneously determine residues of 109 pesticides (including isomers) in the foods of animal origin. Acetonitrile was selected for accelerated solvent extraction (ASE) for effectively extracting the pesticides from the fatty samples. The cleanup was performed with an automated gel permeation chromatography (GPC) cleanup system. The prepared samples were analysed with GC–MS in the selected ion monitoring mode (SIM) using one target and two qualitative ions for each analyte. Chlorpyrifos-d₁₀ was used as an internal standard. The lowest limit of detection was 0.3 μg kg⁻¹ for some pesticides. The recoveries and relative standard deviations (RSDs) were checked by spiking untreated samples with pesticides at 0.05, 0.1 and 0.2 mg kg⁻¹. The average recoveries of most pesticides were from 62.6% to 107.8%. The precision values expressed as RSD were all ?20.5% (n = 6). Good linearity (r ? 0.99) was observed between 0.05 and 1.5 μg mL⁻¹.     

Chemical composition of cultivated seaweed Ulva clathrata (Roth) C. Agardh

Samples of cultivated Ulva clathrata were collected from a medium scale system (MSS, 1.5 × 1.5 m tank), or from a large scale system (LSS, 0.8 ha earthen pond). MSS samples were dried directly while the LSS sample was washed in freshwater and pressed before drying. Crude protein content ranged 20–26%, essential amino acids accounting for 32–36% of crude protein. The main analysed monosaccharides were rhamnose (36–40%), uronic acids (27–29%), xylose (10–13%) and glucose (10–16%). Some notable variations between MSS and LSS samples were observed for total dietary fibre (26% vs 41%), saturated fatty acids (31% vs 51%), PUFAS (33% vs 13%), carotenoids (358 vs 169 mg kg⁻¹ dw) and for Ca (9 vs 19 g kg⁻¹), Fe (0.6 vs 4.2 g kg⁻¹), Cu (44 vs 14 mg kg⁻¹), Zn (93 vs 17 mg kg⁻¹) and As (2 vs 9 mg kg⁻¹). The chemical composition of U. clathrata indicates that it has a good potential for its use in human and animal food.     

Determination of tetracyclines in multi-specie animal tissues by pressurized liquid extraction and liquid chromatography–tandem mass spectrometry

A specific, sensitive and robust pressurized liquid extraction (PLE) and liquid chromatography tandem mass spectrometry (LC–MS/MS) method for determining tetracycline, chlortetracycline, oxytetracycline and doxycycline in bovine, swine, poultry and lamb muscle tissues is presented. PLE was performed using an ASE^® 200 from Dionex and water as extractant, followed by solid-phase extraction (SPE) using an Oasis HLB cartridge. The method was validated for beef, chicken, pork and lamb meat in compliance with the requirements set by Commission Decision, 2002/657/EC [Commission Decision 2002/657/EC (2002). Implementing Council Directive 96/23/EC concerning the performance of analytical methods and interpretation of results. Official Journal of European Communities, L239, 66–98. (Available at: <http://europe.eu.int>)]. The average recoveries of the different meat samples, spiked with the four tetracyclines at three levels (1, 100 and 200 μg kg⁻¹ of each tetracycline), were always higher than 89% with intraday and interday precision lower than 15% and 17%, respectively. A good linearity was established for the four tetracyclines in the range from 5 to 10,000 μg kg⁻¹ with r > 0.995. The limits of quantification (LOQs) were between 0.5 and 1 μg kg⁻¹, which are well below the tolerance levels set by the European Union. The decision limit (CCα) and the decision capability (CCβ) were in the range 101–116 and 112–130 μg kg⁻¹, respectively. Compared with previous methods, sample preparation time required for the analysis and LOQs, are reduced. The method demonstrated its successful application for the analysis of 100 meat samples. Two samples of beef and one sample of chicken out of 25 of each type tested positive while none of 25 samples of either, lamb or pork, tested positive.     

Determination of Gibberellin A3 residue in fruit samples by liquid chromatography–tandem mass spectrometry

A fast, simple, low cost, and high throughput method has been developed for the determination of Gibberellin A3 residue in fruit samples (apple, orange, peach, pear and grape). Analysis is performed by LC–MS/MS operated in the multiple reaction monitoring (MRM) mode, acquiring two specific precursor-product ion transitions per target compound. The method has been validated showing good linearity and selectivity. Limits of quantification (LOQs) were 10 μg kg⁻¹ for apple, orange, peach, pear and grape samples. The average recoveries, measured at three concentration levels (10, 20 and 200 μg kg⁻¹) were in the range 77.8–96.2% for the compound tested with relative standard deviations below 13.7%. The proposed method is rapid, simple and could be utilised for the routine analysis of Gibberellin A3 in fruit samples.     

Ultrasound-assisted solid liquid extraction (USLE) of olive fruit (Olea europaea) phenolic compounds

A new method of ultrasound-assisted solid liquid extraction (USLE) of olive fruit phenols is described. Phenolics were extracted using high intensity probe ultrasonication and analysed by HPLC-DAD-FLD-MS/MS. Four USLE parameters – sonication time (4, 15, 20, 30 min), temperature (25, 45 °C), solvent composition (80%, 100% methanol) and extraction steps (1–5) were studied and optimised on the basis of nine major olive fruit phenols. A three-step extraction of 20 min with pure methanol (25 mL) at 45 °C was needed for sufficient phenol recoveries (94.1–98.7%) from 1.5 g of freeze-dried olive fruits. The proposed USLE method was more efficient in comparison to US bath and agitation, with up to 33% and 80% enhancement in the case of oleuropein, respectively. In addition, the overall method provided high selectivity, precision and sensitivity with LODs/LOQs ranging from 0.66–4.92 μg g⁻¹ and 2.00–14.77 μg g⁻¹ of olives DW, respectively.