共查询到20条相似文献,搜索用时 140 毫秒
1.
在建筑行业,立面设计是一项技术含量较高的工作,从立面设计相关概念着手,对建筑行业立面设计出现问题的原因进行探析,将其概述之后,根据建筑立面设计存在的问题提出针对性解决方案,通过方案实施来推动建筑立面设计发展。 相似文献
2.
本文通过西安交通指挥中心大楼的建筑设计方案构思,阐明该建筑的立面形象设计,应从现代功能入手,通过功能的构件组合、联想,以达到建筑立面更具有个性化,标志性。 相似文献
3.
城市夜景风貌是当前城市建设一个热点,建筑设计者了解建筑立面构造设计与建筑立面照明的关系和建筑景观照明的常用设计方法是有必要的。对建筑立面构造设计与建筑立面照明进行了分析,建议了高层建筑立面构造设计时应考虑的因素。 相似文献
4.
该文针对目前部分建筑师在设计中过分重视建筑立面、造型,而忽视平面的设计这一现象,运用大量实例分析证明,同除了在组织建筑内部的功能方面至关重要外,它与建筑环境、立面、造型、空间等要素关键密切,因而在建筑设计中是不容忽视的。同时该文也通过分析当代社会和文化艺术的发展与特性,阐明了产生上述现象的根本原因。 相似文献
5.
在当下.建筑形式美一直是对于建筑最直观的评价;建筑造型设计就是一种建筑美的直观体现,而建筑立面始终处于一种动态变化中,其随着不同时间、不同环境,对建筑立面的要求也是随之变化的;立面是最直观的视觉,可看出其建筑结构的模样;其表现的就是建筑外部的可视部分,而影响其因素众多,主要根据建筑使用功能来决定其结构设计、外观特点等一系列因素;本文主要分析了影响建筑立面设计的因素以及建筑立面与建筑之间的紧密联系,在此基础上,可提供其理论依据,为建筑立面设计的未来铺路. 相似文献
6.
7.
主要分析了建筑立面设计规律和设计要点。先阐述建筑立面设计的内涵,其次在分析建筑立面设计方法的基础上,详细论述建筑立面设计过程中需要注意的问题。实践可知,在建筑立面设计上,需要按照几何形状规律、主从分明规律与用轴线的处理突出主体等规律方式设计,才能切实地提升建筑立面效果。 相似文献
8.
关于我国城市建筑立面设计的思考 总被引:1,自引:0,他引:1
建筑立面是体现建筑美的一个重要方面,就临街建筑的立面具有特殊的重要性,提出并说明了在一定条件下建筑立面比建筑实用功能重要的观点,分析了造成建筑立面设计不理想的原因,并提出了解决这种状况的一些建议,从而为设计师做好建筑立面的设计工作提供了指导。 相似文献
9.
10.
青岛保税区建筑色彩及立面形象改造 总被引:1,自引:0,他引:1
介绍了青岛保税区建筑单体的色彩改造及立面形象改造,分析了色彩在建筑设计及城市设计中的重要性,详细阐述了各个功能分区的改造原则和改造思路,并以每个功能区的单体改造方案为例,来阐述以色彩为主的建筑单体立面形象改造,为人们进行详细规划和城市改造给予启迪和参考。 相似文献
11.
选取了一个弯肘形尾水管,保持肘管尺寸不变,只改变尾水管直锥段尺寸形成6种尾水管,分别比较了6种尾水管高度在某工况下时的压力特征,基于CFD分析技术,充分说明了12A窄高型尾水管性能良好。 相似文献
12.
针对计算机草图技术在建筑方案设计阶段应用深度和广度不足的现状,通过与手绘草图、工作模型这两种传统辅助设计手段相比较,突出了计算机草图的技术优势,进而分析了在方案设计阶段应用该技术的可行性和合理性,以此引发建筑同行的关注。 相似文献
13.
通过分析地下车库通风工程常规设计中存在的问题,对国内外近年来推广的诱导通风方式在车库中的应用进行了探讨,实践证明诱导型通风系统在技术经济上优于常规通风系统,值得推广应用。 相似文献
14.
15.
在简要介绍自然通风作用及机理的基础上,从几个方面详细探讨了郑州地区住宅建筑有关自然通风设计的问题。应用仿真模拟的方法,从总体空间布局、户型平面设计和通风构造措施三个层面进行分析,旨在探讨如何创造郑州地区住宅良好的自然通风环境。 相似文献
16.
The efficiency of a hydraulic reaction turbine is significantly affected by the efficiency of its draft tube. The shape (profile) and velocity distribution at the inlet affect the performance of the draft tube. So far, the design of draft tubes has been improved through experimental observations resulting in ‘rules of thumb’ and empirical formulae. In the last two decades the use of computational fluid dynamics (CFD) for research and designing complex profiles has improved significantly due to its flexibility and cost-effectiveness. A CFD-based design can further be aided with robust and user-friendly optimisation. Numerical analysis of fluid through a draft tube is challenging and time consuming due to complex flow features. Hence there is a need for developing accurate and reliable CFD models together with efficient optimisation. Studies of the principles of draft tube, internal flow pattern, various turbulence models and associated divergence along with results have been presented in this paper. The objective of this paper is to present the application of CFD simulation in design and flow analysis of the draft tube and also find out the factors which influence the deviation of CFD results with experimental results. From the literature, it has been observed that there are several factors (accurate inlet conditions, turbulent models selected for simulation, modification in geometric parameters and accuracy in measurement of experimental results) that influence the draft tube design and performance. Thus, there is a scope of research for optimisation of geometrical parameters of the draft tube for its best performance at full load condition using CFD simulation. It is carried out by applying 3D velocity as an inlet boundary condition measured with particle image velocimetry/laser Doppler velocimetry. 相似文献
17.
In air-conditioning systems, conditioned warm/cold air is supplied to the room depending upon winter/summer. This air should be properly distributed into the room so that there are neither draft conditions nor stagnant zones. In this investigation air circulation and temperature distribution in a room have been studied for a particular location of air inlet and outlet on opposite walls. Two-dimensional, steady, laminar, incompressible flow has been considered. Navier–Stokes equation and energy equations in two-dimensional rectangular Cartesian co-ordinates have been numerically solved using control volume method. Boussinesq's approximation has been used for buoyancy force. 相似文献
18.
19.
对MAXFLOW叶轮在配置导流筒和未配置导流筒两种状态下的高蕾度沉淀池进行了试验模拟,按10:1的比例建立了实验装置,并进行了不同转速条件下功率准数的测试和计算。试验结果表明:配置导流筒和未配置导流筒的反应扭矩和转动频率平方值均呈现良好的线性关系,尺2值达到0.999。两种情况下的功率准数基本不随雷诺数的不同而变化。MAXFLOW叶轮在配置导流筒情况下的功率准数为0.707,比未配置导流筒下降了14%。在国内某水厂絮凝池的应用中,配置导流筒情况下搅拌机的额定功率比标准设计状态下节省了32%。 相似文献