Radiation synthesis of graphene oxide/composite hydrogels and their ability for potential dye adsorption from wastewater

A high yield of graphene oxide (GO) was chemically synthesized from graphite powder utilizing adjusted Hummer's method. The contents of acidic functional groups in GO were determined using potentiometric titration. Composite hydrogels dependent on graphene oxide/poly(2-acrylamido-2-methylpropanesulfonic acid)/polyvinyl alcohol (GO/PAMPS/PVA) were synthesized utilizing a ⁶⁰Co gamma irradiation source at different doses. The synthesized graphene oxide and composite hydrogels were portrayed via X-ray diffraction, thermogravimetric analysis, and Fourier transform infrared analysis. The morphology of composite hydrogels was characterized by scanning electron microscope. The gel % and swelling % for the prepared hydrogel demonstrated that the swelling % of hydrogel increased with raising AMPS content. Whereas the increment of GO and increasing the irradiation dose lead to a reduction in the swelling %. The influences of pH, GO percentage, initial dye concentration, the adsorbent dosage, contact time, and temperature on the adsorption of basic blue 3 dye were evaluated and the adsorption capacity was 194.6 mg/g at optimum conditions; pH = 6, GO/PAMPS/PVA composite hydrogels with 5 wt% of GO, initial dye concentration = 200 mg/L, adsorbent dose = 0.1 g, solution volume = 50 mL after 360 min at room temperature (25°C). The adsorption of dye onto the GO/PAMPS/PVA composite hydrogels follows Pseudo-second-order adsorption kinetics, fits the Freundlich adsorption isotherm model.     

Fabrication and characteristics of graphene oxide/nanocellulose fiber/poly(vinyl alcohol) film

Poly(vinyl alcohol) (PVA), PVA/nanocellulose fiber (CNF), and PVA/CNF/graphene oxide (GO) films were prepared simply by casting stable aqueous mixed solutions. FTIR investigation indicated that hydrogen bonding existed between the interface of GO and PVA‐CNF. Scanning electron microscopy and X‐ray diffraction analysis showed that GO was uniformly dispersed in PVA‐CNF matrix. Introducing CNF into PVA caused a significant improvement in tensile strength, and further incorporating GO into PVA/CNF matrix led to a further increase. The tensile strength of the neat PVA film, PVA/CNF composite, and PVA/CNF/GO film (0.6 wt % GO) was 43, 69, and 80 MPa, respectively. Moreover, when incorporating 8 wt % CNF into PVA matrix, O₂ permeability and water absorption decreased from 13.36 to 11.66 cm³/m²/day and from 164.2% to 98.8%, respectively. Further adding 0.6 wt % GO into PVA/CNF matrix resulted in a further decrease of permeability and water absorption to 3.19 cm³/m²/day and 91.2%, respectively. Furthermore, for all composite samples, the transmittance of visible light was higher than 67% at 800 nm. CNF and GO‐reinforced PVA with high mechanical and barrier properties are potential candidates for packaging industry. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45345.     

In situ crosslinking of poly(vinyl alcohol)/graphene oxide Nano-composite hydrogel: intercalation structure and adsorption mechanism for advanced Pb(II) removal

Based on the industrialized graphene oxide (GO) product, poly(vinyl alcohol) (PVA)/GO nano-composite hydrogels were prepared through in situ crosslinking by incorporation of N-[(trimethoxysilyl)propyl] ethylenediamine-triacetic acid sodium (CSA) as a compatibilizer. Introduction of CSA led to more efficient grafting of PVA molecules onto GO surface with increasing average layer thickness through covalent and hydrogen bonding interaction, while GO was exfoliated and uniformly distributed in PVA matrix. Addition of appropriate content of GO can improve the storage modulus and the effective crosslinking density (υ_e) of the composite hydrogel, and the network structure with GO as crosslinking point formed, resulting in the remarkable increase of the hydraulic impact resistance, mechanical strength and toughness of the hydrogel. Pb²⁺ adsorption capacity of the hydrogel increased with GO content, while the adsorption belonged to the second-order kinetic model and fitted Langmuir adsorption isotherm model, indicating the homogeneous nature of monolayer chemical adsorption of Pb²⁺. A relatively good reusability of the composite hydrogel beads for Pb²⁺ removal can be achieved.     

Effects of gamma irradiation on the thermal and mechanical properties of chitosan/PVA nanofibrous mats

Chitosan/poly(vinyl alcohol) (PVA) nanofibrous mats were prepared by the electrospinning method. The morphology and structure of electrospun nanofibers were investigated by scanning electron microscopy (SEM) and Fourier transform infrared (FT-IR) spectroscopy. SEM images showed that the uniform and bead-free fibers were obtained at concentrations greater than 8 wt%. Chitosan/PVA mats were irradiated with different doses (50–200 kGy) of ⁶⁰Co gamma rays. The effect of irradiation dose on the mechanical and thermal properties of these films was also investigated. Increasing the irradiation dose led to a decrease in tensile strength. FT-IR and DSC demonstrated that there were strong intermolecular hydrogen bonds between the chitosan and PVA molecules.     

Core-shell particles for design of high-performance polymeric materials with good transparency and toughness

The exfoliated graphene oxides (GOs) prepared via the Hummer’s method were well dispersed in water but re-stacked if drying to a powder form as observed by transmission electron microscope and x-ray diffraction pattern. Hence, they were directly mixed with poly(vinyl alchohol) (PVA) in water to fabricate the PVA/GO nanocomposite films by casting the resulting aqueous solutions and drying. As the nanocomposite films with no less than 5 wt% GO content were subjected to combustion, the char residue could preserve their original film profile acting like an inflammable scaffold. The glassy transition temperature of as-fabricated PVA/GO nanocomposite films barely changed with the content of GO but significantly decreased from ~70 to ~10 °C as environmental relative humidity (RH) was increased from 20 to 80 % due to more moisture adsorption. Therefore, the mechanical behavior of PVA/GO nanocomposite films not only depended on the GO content but also RH, exhibiting from rubbery to glassy status.     

Comparative study of gamma and ion beam irradiation of polymeric nanocomposite on electrical conductivity

Poly(vinyl alcohol) (PVA) was used to prepare nanocomposites of multi‐wall carbon nanotubes (MWCNT) and functionalized carbon nanotubes (MWCNT‐NH₂) in existence of 2‐carboxyethyl acrylate oligomers (CEA). Radiation‐induced crosslinking of the prepared matrix was carried out via gamma and ion beam irradiation. A comparative study of gamma and ion beam irradiation effect on the electrical conductivity of nanocomposite was conducted. The gelation of the gamma irradiated matrix outperforms the ion beam irradiated matrix. The order of gelation is PVA > (PVA/CEA) > (PVA/CEA)‐MWCNT > (PVA/CEA)‐MWCNT‐NH₂. There is a significant reduction in the swelling of the nanocomposite. The formation of nanocomposites was confirmed by scanning electron microscopy, energy‐dispersive X‐ray (EDX) and FTIR examinations. The direct current electrical properties of PVA/nanocomposites are examined at room temperature by applying electric voltage from 1 to 20 V. The results revealed that the electrical conductivity is increased by adding the carbon nanotubes and irradiation by gamma and ion beam. At an applied electric voltage 20 V, in the electrical conductivity of the unirradiated PVA was from 9.20 × 10^?8 S cm^?1. After adding MWCNT an increase up to 4.70 × 10^?5 S cm^?1 was observed. While after ion beam irradiation, a further increase up to 9.30 × 10^?5 S cm^?1 was noticed. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46146.     

Dielectric properties of irradiated polymer/multiwalled carbon nanotube and its amino functionalized form

The polymer/multiwalled carbon nanotube [poly(vinyl alcohol) (PVA)/carboxyethyl acrylate (CEA)]‐multiwalled carbon nanotube (MWCNT) and its amino functionalized (PVA/CEA)‐MWCNT‐NH₂ nanocomposite samples were successfully synthesized by the chemical method in the form of films. The samples were irradiated with gamma‐ray doses of 50 and 100 kGy and with ion beam fluence of 2.5 × 10¹⁸ and 3.75 × 10¹⁸ ions cm^?2. The prepared nanocomposite samples were characterized using X‐ray diffraction and thermogravimetric analysis. The X‐ray diffraction and thermogravimetric analysis confirm the existence of the chemical crosslinking occurred in the polymer compositions. The AC electrical conductivity, electrical modulus, dielectric constant, and dielectric loss in the frequency range 10²–10⁶ Hz are measured at room temperature. The electrical conductivity is increased with MWCNT doping, gamma‐irradiation, and by ion beam irradiation. A comprehensive analysis of the results revealed that dielectric properties are improved due to the induced physicochemical changes and conductive networks induced by ion beam irradiation. The behavioral effect of these embedded nanoparticles in a PVA matrix on the microstructural, dielectric, and electric properties is analyzed for possible device applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46647.     

Preparation and Characterization of Gelatin-Based PVA Film: Effect of Gamma Irradiation

Gelatin-based polyvinyl alcohol (PVA) films were prepared (using a casting process) by mixing aqueous solutions of gelatin and PVA in different ratios. Monomer 1, 4-butanediol diacrylate (BDDA) was dissolved in methanol. Films containing 95% gelatin + 5% PVA were soaked in 3% BDDA monomer (w/w). These films were then irradiated under gamma radiation (⁶⁰Co) at different doses (50–500 krad) at a dose rate of 350 krad/h. The physico-mechanical and thermal properties of these films were evaluated. It was evident that 5% PVA-containing gelatin blend film exhibited the highest tensile strength (TS) value at 50 krad (51 MPa), which was 46% higher than that of non-irradiated blend films. It was also found that incorporation of PVA significantly reduced the TS value of the blend films compared to the raw film, whereas elongation at break (Eb) value was increased. A significant improvement of the blend films was also confirmed by thermogravimetric analysis (TGA) and thermo-mechanical analysis (TMA) when the acrylate group (from BDDA) was introduced into the film.     

Preparation of graphene oxide/carboxymethyl chitosan/polyvinyl alcohol composite nanofiber membranes by electrospinning for heavy metal adsorption

In this paper, a graphene-oxide/carboxymethyl-chitosan/polyvinyl-alcohol (GO/CMC/PVA) composite nanofiber membrane was prepared by electrospinning and cross-linking with glutaraldehyde (GA) to improve the water resistance. The composite nanofiber membrane can be used in the field of heavy metal adsorption. The membrane was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction. The effects of GO concentration, adsorption time, and initial concentration of heavy-metal ion (Ni²⁺, Cu²⁺, Ag⁺, and Pb²⁺) solution on the adsorption performance of the fiber membranes were investigated. The results showed that the addition of GO can reduce the diameter of nanofibers. GO, CMC, and PVA exhibited good compatibility, and the intermolecular hydrogen bonding improved. The addition of GO also improved the crystalline properties of the composite fiber membrane. In the optimal cross-linking condition, GA was saturated by steam cross-linking for 6 h. The introduction of GO improved the adsorption capacity of the membrane for heavy metals in water. The utmost adsorption capacities for Ni²⁺, Cu²⁺, Ag⁺, and Pb²⁺ were 262.1, 237.9, 319.3, and 413.6 mg/g when using the cross-linked composite fiber membranes, respectively. The results of adsorption kinetics and thermodynamics showed that the adsorption process accorded with the pseudo-second-order kinetic model and Langmuir–Freundlich isotherm model.     

Functionalization of polyvinyl alcohol hydrogels with graphene oxide for potential dye removal

Because of highly frozen macromolecule chains, polyvinyl alcohol (PVA) hydrogels have never been used for dye removal. This work focuses on improving the adsorption capacity of the PVA hydrogel by using amphiphilic graphene oxide to improve its macromolecular chain mobility in crystal domain and introduce new functional groups. To evaluate its effectiveness, crystal structure, swelling kinetics, and model dye methylene blue (MB) adsorption of the as‐prepared PVA hybrid hydrogels were systematically investigated. The results indicate that the hybrid PVA hydrogels have lower crystallinity and less crystal stability, demonstrating the improved macromolecular chain mobility. Moreover, improved swelling ratios of PVA/GO hydrogels also illustrate the enhanced macromolecular chain mobility. MB adsorption experiment indicates that GO introduced can result in great improvement in MB adsorption. And the adsorption process follows the second‐order kinetic model and Morris–Weber model, which is determined by the intraparticle diffusion. Furthermore, MB adsorption isotherm follows Freundlich model and the adsorption is heterogeneous. Desorption studies indicate that the interaction between PVA hydrogels and MB consists of both physisorption and chemisorption. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39872.     

Effect of copper sulfate pentahydrate on the structure and properties of poly(vinyl alcohol)/graphene oxide composite films

Poly(vinyl alcohol) (PVA)/graphene oxide (GO)/copper sulfate pentahydrate (CuSO₄·5H₂O) composite films were prepared by the solution casting method, and the effect of CuSO₄·5H₂O on the structure and properties of the PVA/GO composites was investigated. Fourier transform infrared (FTIR) analysis proved the crosslinking interaction between CuSO₄·5H₂O and the ? OH group of PVA. The crystallinity of the composite films increased first and then decreased. For the composite films, the tensile strength, Young's modulus, and yield stress values improved with increasing CuSO₄·5H₂O, whereas the elongation at break decreased compared with that of the neat PVA/GO composite film. The thermogravimetric analysis (TGA) and derivative thermogravimetry (DTG) patterns of the PVA/GO/CuSO₄·5H₂O composite films showed that the thermal stability decreased; this was consistent with the TGA–FTIR analysis. A remarkable improvement in the oxygen‐barrier properties was achieved. The oxygen permeability coefficient was reduced by 60% compared to that of the neat PVA/GO composite film. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44135.     

Thermal,structural, and optical properties of γ‐irradiated poly(vinyl alcohol)/poly(ethylene glycol) thin film

Poly(vinyl alcohol)/poly(ethylene glycol) (PVA/PEG) copolymer was prepared using casting technique. The obtained PVA/PEG thin films have been irradiated with gamma rays with doses ranging from 1.5 to 20 Gy. The resultant effect of gamma irradiation on the thermal properties of PVA/PEG has been investigated using thermogravimetric analysis (TGA) and differential thermal analysis (DTA). The onset temperature of decomposition T_o and activation energy of thermal decomposition E_a were calculated, results indicating that the PVA/PEG thin film decomposes in one main weight loss stage. Also, the gamma irradiation in dose range 4–12 Gy led to a more compact structure of PVA/PEG copolymer, which resulted in an improvement in its thermal stability with an increase in the activation energy of thermal decomposition. The variation of transition temperatures with gamma dose has been determined using DTA. The PVA/PEG thermograms were characterized by the appearance of an endothermic peak due to melting of crystalline phase. In addition, structural property studies using X‐ray diffraction and infrared spectroscopy were performed on both nonirradiated and irradiated samples. Furthermore, the transmission of the PVA/PEG samples and any color changes were studied. The color intensity (E was greatly increased with increasing the gamma dose and was accompanied by a significant increase in the blue and green color components. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

具有各向异性结构的聚乙烯醇水凝胶的制备及性能表征

首先对聚乙烯醇（PVA）水溶液进行定向冷冻-解冻制备出具有各向异性结构的PVA水凝胶,然后采用⁶⁰Co-γ射线对其进行辐射交联以提高其热稳定性和力学性能。扫描电子显微镜（SEM）结果显示PVA水凝胶保持了各向异性的微观结构,在平行冷冻方向上具有相对规整的取向结构,在垂直冷冻方向上呈现均匀孔洞结构。热稳定性测试结果表明：辐射剂量在30~70 kGy范围内、定向冷冻次数为1次的PVA水凝胶在60℃热水浴中保持凝胶状态长达10 h以上。对辐射交联PVA水凝胶进行拉伸力学性能测试,凝胶具有各向异性的拉伸性能,且拉伸强度和弹性模量均有提高,辐射剂量为10 kGy、定向冷冻次数为3次的PVA水凝胶（DFT-RC-3-10）在垂直定向冷冻方向上的拉伸强度和弹性模量分别为0.86和0.10 MPa。     

Nanofibrillated cellulose,poly(vinyl alcohol), montmorillonite clay hybrid nanocomposites with superior barrier and thermomechanical properties

Nanocomposites of poly(vinyl alcohol) (PVA), nanofibrillated cellulose (NFC), and montmorillonite (MMT) clay were prepared via solvent casting. In addition to investigating the effect of clay loading, PVA matrices crosslinked with poly(acrylic acid) (PAA) were prepared and compared with linear (noncrosslinked) PVA nanocomposites. ¹³C NMR and infrared spectroscopy confirmed the presence of crosslinks. Scanning electron microscopy revealed effective NFC and MMT clay dispersion throughout the nanocomposites, while X‐ray diffraction highlighted the effectiveness of PAA to encourage clay dispersion. MMT clay provided a barrier against the diffusion of water and oxygen (molecules) through the nanocomposite films. Permeability and adsorption were further reduced by crosslinking, while oxygen barrier properties were remarkably enhanced at elevated relative humidities. Thermal stability of the PVA segments was strengthened by the presence of MMT clay and crosslinks. MMT clay–reinforced PVA and NFC within the films, increasing the Young's modulus, tensile strength, and glass transition temperature. Crosslinking further enhanced the thermomechanical properties by imparting physical restraints on polymer chain segments, providing elasticity, and ductility. The hybrid films were successfully reinforced at elevated humidities, with nanocomposites displaying enhanced storage moduli and near‐complete recovery. POLYM. COMPOS., 35:1117–1131, 2014. © 2013 Society of Plastics Engineers     

Preparation and characterization by radiation of hydrogels of PVA and PVP containing Aloe vera

In these studies, hydrogels for wound dressing were made from a mixture of Aloe vera, poly(vinyl alcohol) (PVA) and poly(N‐vinylpyrrolidone) (PVP) by freeze‐thaw, gamma‐ray irradiation, or a two‐step process of freeze‐thaw and gamma‐ray irradiation. Physical properties, such as gelation, water absorptivity, gel strength and degree of water evaporation were examined to evaluate the applicability of these hydrogels to wound dressing. The PVA:PVP ratio was 6:4, and the dry weight of Aloe vera was in the range of 0.4‐1.2 wt %. The solid concentration of PVA/PVP/Aloe vera solution was 15 wt %. Mixtures of PVA/PVP/Aloe vera were exposed to gamma irradiation doses of 25, 35 and 50 kGy to evaluate the effect of irradiation dose on the physical properties of the hydrogels. Gel content and gel strength increased as the concentration of Aloe vera in PVA/PVP/Aloe vera decreased and as irradiation dose increased and freeze‐thaw was repeated. Swelling degree was inversely proportional to gel content and gel strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1612–1618, 2004     

Gamma irradiation synthesis and characterization of AgNP/gelatin/PVA hydrogels for antibacterial wound dressings

An antibacterial hydrogel wound dressing was successfully synthesized by the gamma irradiation method. A gelatin solution was mixed with a poly(vinyl alcohol) (PVA) solution of similar concentrations at different weight ratios of 100 : 0, 80 : 20, and 60 : 40 w/w, and irradiated at 30, 40, or 50 kGy. The testing of physical properties showed that the addition of PVA could improve both durability and mechanical integrity. The 60 : 40 hydrogels irradiated at 30 kGy were optimal, and chosen to add silver nitrate at 0.25, 0.50, 0.75, or 1.00 wt % (based on the solid content) to improve the antibacterial properties. After gamma irradiation, silver nanoparticles (AgNPs) were formed. The AgNP/gelatin/PVA hydrogels were characterized for physical properties, cytotoxicity, and antibacterial activity. The AgNP/gelatin/PVA hydrogels could be used as antibacterial wound dressings because they exhibited appropriate physical properties, noncytotoxicity, and could inhibit the growth of tested bacteria. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41138.     

Synergistic effect of α‐ZrP and graphene oxide nanofillers on the gas barrier properties of PVA films

Two types of 2D nanofillers, α‐zirconium phosphate (α‐ZrP) and graphene oxide (GO), were synthesized and incorporated into poly(vinyl alcohol) (PVA) with 1 wt % loading level at various α‐ZrP:GO (Z:G = 5:1, 2:1, 1:1, 1:2, and 1:5) ratios. The resulting nanocomposites were tested for barrier properties by casting films from solution. The structure and morphology of α‐ZrP and GO were characterized by Fourier‐transform infrared spectroscopy, atomic force microscope, scanning electron microscopy, transmission electron microscopy, and X‐ray diffraction, which demonstrated successful preparation of exfoliated α‐ZrP and GO. The physical characteristics of the nanocomposite films, including thermal, mechanical, and gas barrier properties were investigated. The results indicated that the tensile strength, Young's modulus, and elongation at break of the PVA nanocomposite films with Z:G hybrid nanofiller improved compared to neat PVA. The glass transition temperature, melting temperature, and crystallinity also increased. Consequently there appears to be a synergistic effect with these two types of nanofillers that formed a specific macro structure of a “wall.” This macrostructure resulted in excellent O₂ gas barrier properties with the PVA/Z:G‐5:1 nanocomposite films having the best performance. The of the PVA/Z:G‐5:1 nanocomposite decreased from 1.835 × 10^?16 to 0.587 × 10^?16 cm³ cm cm^?2 s^?1 Pa^?1 compared with neat PVA. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46455.     

The Effect of glycerol on the crystalline,thermal, and tensile properties of CaCl2‐doped starch/PVA films

Starch/poly(vinyl alcohol) (PVA) films with the addition of 10 wt% CaCl₂ and various content of glycerol were prepared. The effect of glycerol on the crystalline, thermal, and tensile properties of CaCl₂‐doped starch/PVA films was studied by X‐ray diffraction, thermogravimetric analysis (TGA), and tensile testing, respectively. The effect of glycerol on the miscibility of CaCl₂‐doped starch/PVA films was studied by scanning electron microscopy. The CaCl₂‐doped starch/PVA film became more homogeneous after the addition of glycerol. The addition of glycerol would increase the crystallinity of CaCl₂‐doped starch/PVA film. With the addition of 10 wt% glycerol and 10 wt% CaCl₂, the starch/PVA film showed the highest degree of crystallinity. The TGA results show that the thermal stability of CaCl₂‐doped starch/PVA film increased after the addition of glycerol. The toughness of CaCl₂‐doped starch/PVA films was enhanced with the addition of glycerol. The starch/PVA film with the addition of 10 wt% CaCl₂ and 20 wt% glycerol showed the tensile strength of 17 MPa and the elongation at break of 428%. Moreover, the water sorption of CaCl₂‐doped starch/PVA film decreased after the addition of glycerol at the low and intermediate relative humidity of 33 and 54%. POLYM. COMPOS., 37:3191–3199, 2016. © 2015 Society of Plastics Engineers     

Separation of heavy metal ions by complexation on poly (N-vinyl imidazole) hydrogels

Summary Poly (N-vinyl imidazole) (PVIm) hydrogels were prepared by -irradiating binary mixtures of N-vinyl imidazole-water in a ⁶⁰Co- source having 4.5 kGy/h dose rate. These hydrogels were characterized with gravimetric and spectrophotometric studies. Hydrogels with equilibrium swelling ratio of 600% in distilled water were used in the metal ion adsorption studies. The effects of pH, equilibration time, and initial metal ion concentration were considered in batch equilibrium study on the chelation of Cu²⁺, Co²⁺, Cd²⁺, and Pb²⁺ ions. Maximum metal ion adsorption were observed at pH=6.0. It has also been observed that the amount of adsorbed metal ions decreased at lower pHs because of protonation of PVIm ring.     

Structure‐property and swelling behavior of electron beam irradiated poly(vinyl alcohol)/acrylamide/sodium montmorillonite clay composites

Composites based on poly(vinyl alcohol) (PVA), acrylamide monomer (AM) and sodium montmorillonite clay (MMT) were prepared, in the form of thin films, by solution casting. The PVA/AM/MMT composites films were then exposed to electron beam irradiation to form crosslinked network structure. The structure‐property behavior of PVA/AM/MMT hybrids was demonstrated by x‐ray diffraction (XRD), scanning electron microscopy, gel content, color intensity, thermogravimetric analysis (TGA) and swelling behavior in aqueous solutions. The results indicated that the introduction of MMT clay ratio up to 5% decreased the gel content of PVA/AM hydrogels. The color measurements indicated that the introduction of MMT clay ratio up to 5% was shown to affect the color intensity of composite films. It was found that both PVA/AM hydrogels and PVA/AM/MMT composites reached the equilibrium swelling state in water after four hours; however PVA/AM/MMT composites displayed higher swelling than PVA/AM hydrogels. However, the swelling of PVA/AM hydrogels or their composites at the equilibrium state increased with increasing temperature up to 60°C. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011