Preparation of a New Polystyrene Supported-Ethylenediaminediacetic Acid Resin and its Sorption Behavior toward Divalent Metal Ions

A new polystyrene-supported ethylenediaminediacetic acid resin has been synthesized through a reaction between the amination of the commercially available 4-chloromethyl polystyrene polymer with ethylenediamine and the subsequent carboxymethylation with monobromoacetic acid, using ethylenediamine as spacer. The chelation behavior of this resin toward the divalent metal ions Cu²⁺, Ni²⁺, Zn²⁺, and Pb²⁺ in aqueous solutions was investigated. Batch equilibration experiments were carried out as a function of contact time, pH, amount of metal-ion, and polymer mass. The amount of metal-ion uptake of the polymer was determined by using atomic absorption spectrometry (AAS). Results of the investigation revealed that the resin exhibited higher capacities and a more pronounced adsorption toward Cu²⁺ and that the metal-ion uptake follows the order: Cu²⁺ > Zn²⁺ > Ni²⁺ > Pb²⁺. The adsorption and binding capacity of the resin toward the various metal ions investigated are discussed.     

Sorption properties of the iminodiacetate ion exchange resin,amberlite IRC‐718, toward divalent metal ions

The sorption properties of the commercially available cationic exchange resin, Amberlite IRC‐718, that has the iminodiacetic acid functionality, toward the divalent metal‐ions, Fe²⁺, Cu²⁺, Zn²⁺, and Ni²⁺ were investigated by a batch equilibration technique at 25°C as a function of contact time, metal ion concentration, mass of resin used, and pH. Results of the study revealed that the resin exhibited higher capacities and a more pronounced adsorption toward Fe²⁺ and that the metal‐ion uptake follows the order: Fe²⁺ > Cu²⁺> Zn²⁺ >Ni²⁺. The adsorption and binding capacity of the resin toward the various metal ions investigated are discussed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Fluorescent chemosensor based on the conjugated polymer incorporating 2,2′‐bipyridyl moiety for transition metal ions

A fluorescent conjugated polymer was synthesized by the polymerization of 1,4‐dibromo‐2,3‐bisbutoxynaphthalene ( M‐2 ) with 5,5′‐divinyl‐2,2′‐bipyridine ( M‐3 ) via Heck reaction. The conjugated polymer shows strong blue–green fluorescence because of the extended π‐electronic structure between the repeating unit 2,3‐bisbutoxynaphthyl group and the conjugated linker 2,2′‐bipyridyl (bpy = 2,2′‐bipyridine) moiety via vinylene bridge. The responsive properties of the conjugated polymer on transition metal ions were investigated by fluorescent and UV–vis spectra. The results show that Cu²⁺ and Ni²⁺ can form nonradiative metal‐to‐ligand charge‐transfer complexes with the polymer, whereas, Zn²⁺ and Cd²⁺ do not produce the pronounced differences from the polymer fluorescence and UV–vis spectra. The fluorescent quenching can probably be attributed to the intramolecular photoinduced electron transfer (PET) or photoinduced charge transfer (PCT). The results can also suggest that 2,2′‐bipyridyl moiety in the main chain backbone of the conjugated polymer can act as the recognition site of a special fluorescent chemosensor for sensitive detection of transition metal ions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Chelation properties of poly(β‐diketone) polymer and its oxime toward heavy metal ions

The chelation behavior of poly(β‐diketone), polymer I, and poly(β‐diketone) oxime, polymer II, toward the divalent metal ions, Cu²⁺, Zn²⁺, Ni²⁺, and Cd²⁺, and the trivalent lanthanide metal ions, La³⁺, Nd³⁺, Sm³⁺, Gd³⁺, and Tb³⁺ was investigated by a batch equilibration technique as a function of contact time, pH, and counter ion. Polymer II exhibited improved chelation characteristics toward lanthanide metal ions in comparison with polymer I and the metal‐ion uptake follows the order Tb³⁺ ≈ Gd³⁺ ≈ Sm³⁺ > Nd³⁺ ≈ La³⁺. On the other hand, polymer I showed relatively higher capacity than polymer II, toward the investigated divalent metal ions, where the metal‐ion uptake follows the order Cu²⁺ > Cd²⁺ ≈ Zn²⁺ > Ni²⁺. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of resin IV: Salicylic acid,diaminonaphthalein, and formaldehyde terpolymer and its ion exchange

This article reports the synthesis, characterization, and ion exchange properties of a terpolymer. The terpolymer resin salicylic acid‐diaminonaphthalein‐formaldehyde (SDNF) was synthesized by the condensation of salicylic acid and diaminonaphthalein with formaldehyde in the presence of a hydrochloric acid catalyst. Terpolymer resin was characterized by elemental analysis, infrared (IR) spectroscopy, nuclear magnetic resonance spectroscopy, and UV–Visible spectral studies. The number average molecular weight of the resin was determined by nonaqueous conductometric titration. Chelation ion exchange properties have also been studied for Fe³⁺, Cu²⁺, Ni²⁺, Co²⁺, Zn²⁺, Cd²⁺, Pb²⁺ ions employing a batch equilibrium method. It was employed to study the selectivity of metal ion uptake involving the measurements of distribution of a given metal ion between the polymer sample and a solution containing the metal ion. The study was carried out over wide pH range and in a media of various ionic strengths. The terpolymer showed higher selectivity for Fe³⁺, Cu²⁺, and Ni²⁺ions than for Co²⁺, Zn²⁺, Cd²⁺, and Pb²⁺ ions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and adsorption properties of macroporous cross‐linked polystyrene that contains an immobilizing 2,5‐dimercapto‐1,3,4‐thiodiazole with tetraethylene glycol spacers

A novel chelating resin macroporous cross‐linked polystyrene immobilizing 2,5‐dimercapto‐1,3,4‐thiodiazole via a hydrophilic tetraethylene glycol spacer (PS‐TEG‐BMT) is synthesized and the structure is characterized by means of Fourier transform infrared spectroscopy (FTIR), energy dispersive X‐ray microanalysis (EDX), and elementary analysis. Its adsorption capacity for several metal ions such as Hg²⁺, Ag⁺, Ni²⁺, Pb²⁺, Cd²⁺, Fe³⁺, Bi³⁺, Zn²⁺, and Cu²⁺ are investigated. The initial experimental result shows that this resin has higher adsorption selectivity for Hg²⁺ and Ni²⁺ than for the other metal ions and the introduction of hydrophilic TEG spacer is beneficial to increase adsorption capacities. The result also shows that the Langmuir model is better than the Freundlich model to describe the isothermal process of PS‐TEG‐BME resin for Hg²⁺. Five adsorption‐desorption cycles demonstrate that this resin are suitable for reuse without considerable change in adsorption capacity. POLYM. ENG. SCI., 45:1515–1521, 2005. © 2005 Society of Plastics Engineers     

Studies of selective adsorption resins. XXV. Preparation of macroreticular chelating resins containing aminomethylphosphonic acid groups from methyl methacrylate/divinylbenzene copolymer beads and their adsorption capacity

Macroreticular chelating resins containing aminomethylphosphonic acid groups were prepared by reaction of methyl methacrylate/divinylbenzene copolymer beads with triethylenetetramine, followed by the reaction of the products with phosphorous acid and formaline. The adsorption capacities of this resin for Cu²⁺, Pb²⁺, Zn²⁺, Ni²⁺, Co²⁺, Ca²⁺, and Mg²⁺ were determined at various pH values. The order of chelate stability for the resin was Cu²⁺ > Pb²⁺ > Zn²⁺ > Ni²⁺ > Co²⁺ > Ca²⁺ > Mg²⁺. Copper, nickel, zinc, calcium, and magnesium ions can be eluted with 1 mol dm^?3 hydrochloric acid. The proposed resin appears to be useful for the removal of Ca²⁺ and Mg²⁺ from salt solution.     

Toxic metal ion removal by terpolymer ion-exchanger from aqueous environments: synthesis,thermal degradation,batch separation,kinetic and isotherm studies

A novel chelating resin was synthesized and characterized by elemental, physico-chemical, GPC, NMR, and SEM analyses. Batch separation was adopted to study the recovery of selected metal ions with respect to the pH, time, concentrations, and electrolytes. From the results, it was observed that the order of the rate of metal ion uptake by the resin was Fe³⁺ > Cu²⁺ > Zn²⁺ > Ni²⁺ > Co²⁺ > Pb²⁺ ions. The adsorption kinetics follows first order, and isotherm models were also found to fit each other. The resin showed three-step thermal degradation, and its kinetic and thermodynamic parameters were also evaluated.     

Preparation of Chelating Resins Containing a Pair of Neighboring Carboxylic Acid Groups and the Adsorption Characteristics for Heavy Metal Ions

Abstract

For the functional enhancement of chelating resins containing carboxylic acids, copolymer beads were prepared by suspension polymerization of styrene (St), methyl methacrylate (MMA), and divinylbenzene (DVB) in the presence of toluene as diluent. The phenyl rings of the beads were directly chloromethylated, and the carboxylic ester groups of the beads were converted into hydroxymethyl groups by reduction followed by chlorination to give chloromethyl groups, respectively. The chelating resins containing a pair of neighboring carboxylic acid groups (NCAGs) were obtained by the alkylation of chloromethyl groups in copolymer beads with diethyl malonate in the presence of sodium hydride followed by hydrolysis using aqueous alkali solution. Accordingly, the structural effects of the resins on the adsorption of heavy metal ions were investigated. Poly(St‐co‐DVB)‐based chelating resin containing NCAGs showed adsorption abilities toward heavy metal ions like Pb²⁺, Cd²⁺, and Cu²⁺, whereas poly(MMA‐co‐DVB)‐based chelating resin containing NCAGs showed adsorption abilities toward heavy metal ions like Cu²⁺, Cd²⁺, and Co²⁺. On the other hand, poly(St‐co‐MMA‐co‐DVB)‐based chelating resin containing NCAGs showed adsorption abilities toward heavy metal ions like Pb²⁺, Cd²⁺, Hg²⁺, Co²⁺, and Cu²⁺: a synergistic effect on the adsorption of heavy metal ions like Pb²⁺, Cd²⁺, Hg²⁺, and Co²⁺ was observed. The adsorption ability of poly(St‐co‐MMA‐co‐DVB)‐based chelating resin among three kinds of chelating resins was relatively good.     

Removal of heavy‐metal ions from aqueous solution with nanochelating resins based on poly(styrene‐alt‐maleic anhydride)

Chelating resins have been considered to be suitable materials for the recovery of heavy metals in water treatments. A chelating resin based on modified poly(styrene‐alt‐maleic anhydride) with 2‐aminopyridine was synthesized. This modified resin was further reacted with 1,2‐diaminoethan or 1,3‐diaminopropane in the presence of ultrasonic irradiation for the preparation of a tridimensional chelating resin on the nanoscale for the recovery of heavy metals from aqueous solutions. The adsorption behavior of Fe²⁺, Cu²⁺, Zn²⁺, and Pb²⁺ ions were investigated by the synthesis of chelating resins at various pH's. The prepared resins showed a good tendency for removing the selected metal ions from aqueous solution, even at acidic pH. Also, the prepared resins were examined for the removal of metal ions from industrial wastewater and were shown to be very efficient at adsorption in the cases of Cu²⁺, Fe²⁺, and Pb²⁺. However; the adsorption of Zn²⁺ was lower than those of the others. The resin was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction analysis, and differential scanning calorimetry analysis. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and characterization of a new guar gum 4‐hydroxybenzoic acid resin and its use for the separation of heavy metal ions in industrial effluents

Hydroxybenzoic acid group has been incorporated onto guar gum by modified Porath's method of functionalization of polysaccharides. The newly synthesized guar gum 4‐hydroxybenzoic acid (GHBA) resin was characterized by Fourier‐transform infrared spectroscopy, elemental analysis, ion‐exchange capacity, column reusability, and physicochemical properties. The distribution coefficient (K_d) values and effect of pH on chelation of these metal ions using batch method were studied. The separations of mixture of Fe²⁺, Zn²⁺, Cu²⁺, Cd²⁺, and Pb²⁺ metal ions on GHBA resin on the basis of their distribution coefficient at various pH were also achieved using column chromatography. The effect of experimental parameters such as pH, treatment time, agitation speed, temperature, adsorbent dose, initial metal ion concentration, and flow rate on the removal of metal ions has been also studied. GHBA resin is effective adsorbents for the removal of different toxic metal ions from aqueous solutions and follows the order: Fe²⁺ > Zn²⁺ > Cu²⁺ > Cd²⁺ > Pb²⁺. POLYM. ENG. SCI. 2013. © 2012 Society of Plastics Engineers     

Preparation and adsorption selectivity for Hg(II) and Ag(I) of chelating resin immobilizing benzothiazolyl group on crosslinked polystyrene via hydrophilic sulfur‐containing PEG spacer

A new chelating resin incorporating 2‐mercaptobenzothiazole (MBZ) into macroporous chloromethylated polystyrene via hydrophilic spacer of polyethylene glycol containing sulfur was synthesized. The resin was characterized by elementary analysis and infrared spectra. The adsorption capacity of the resin for Ag⁺, Hg²⁺, Cu²⁺, Zn²⁺, and Pb²⁺ as a function of pH was determined. The effects of interference ions, such as Na⁺, Mg²⁺, Ca²⁺, Ba²⁺, Cu²⁺, Zn²⁺, and Pb²⁺, on percent recovery were also investigated. The results showed that the resin could effectively remove Hg²⁺ and Ag⁺ from solutions containing a large excess of Na⁺, Mg²⁺, Ca²⁺, Ba²⁺, Cu²⁺, Zn²⁺, and Pb²⁺. In column operation, it was observed that Hg²⁺ and Ag⁺ in trace quantities were effectively removed from binary metal ions. The percent recovery of the resin for Hg²⁺ and Ag⁺ was >98.6% and >97.5%, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 5034–5038, 2006     

Chelation ion‐exchange properties of copolymer resin derived from 4‐hydroxyacetophenone,oxamide, and formaldehyde

A copolymer (4‐HAOF) prepared by condensation of 4‐hydroxyacetophenone and oxamide with formaldehyde in the presence of an acid catalyst proved to be a selective chelating ion‐exchange copolymer for certain metals. Chelating ion‐exchange properties of this copolymer were studied for Fe³⁺, Cu²⁺, Ni²⁺, Co²⁺, Zn²⁺, Cd²⁺, Pb²⁺, and Hg²⁺ ions. A batch equilibrium method was employed in the study of the selectivity of metal‐ion uptake involving the measurements of the distribution of a given metal ion between the copolymer sample and a solution containing the metal ion. The study was carried out over a wide pH range and in media of various ionic strengths. The copolymer showed a higher selectivity for Fe³⁺ ions than for Co²⁺, Zn²⁺, Cd²⁺, Pb²⁺, Cu²⁺, Ni²⁺, and Hg²⁺ ions. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 787–790, 2003     

Studies of Retention and Reusable Capacities of Melamine Formaldehyde Based Terpolymer Against Some Toxic Metal Ions by Batch Equilibrium Method

Chelating terpolymer resin was synthesized and characterized by elemental, physico-chemical, spectral, SEM, XRD, and GPC to elucidate the structure and properties of the terpolymer. Ion-exchange analysis involving evaluation of metal ion uptake in different electrolyte concentrations, pH, and time have been studied to assess the retention capacities of the terpolymer for the metal ions viz. Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, and Pb²⁺. The adsorption isotherm was evaluated using the Langmuir and Freundlich isotherms models and the results were found best fitting with each other. The resin can be successfully used in the field of recovery of metal ions from effluents and contaminated water.     

Competitive Metal Ion Binding to a Silicate-Immobilized Datura innoxia Biomaterial

Abstract

Metal ion binding with a flowing system to a biosorbent comprised of cultured cell-wall fragment within a polysilicate matrix has been investigated. Solutions containing 0.10 mM Pb²⁺, Cu²⁺, Ni²⁺, Cd²⁺, and Zn²⁺ were exposed to the material in combinations of two, three, and five metals while simultaneously monitoring the concentration of all metals in the effluent stream. A relative affinity order of Pb²⁺ > Cu²⁺ >> Zn²⁺ ≈ Cd²⁺ > Ni²⁺ was determined when all five metal ions were exposed to the material. Lower-affinity metal ions were exposed to the material sequentially. Both metal-specific and common binding sites were observed for each metal ion. The presence of both binding sites that are common to all metal ions investigated and sites that appear to be unique for each metal ion could significantly impact the utility of single-metal ion studies on the application of such biosorbents for the selective removal of metal ions from natural water.     

Characterization of Adsorptive Capacity and Investigation of Mechanism of Cu2+, Ni2+ and Zn2+ Adsorption on Mango Peel Waste from Constituted Metal Solution and Genuine Electroplating Effluent

Abstract

The present study reports the potential of mango peel waste (MPW) as an adsorbent material to remove Cu²⁺, Ni²⁺, and Zn²⁺ from constituted metal solutions and genuine electroplating industry wastewater. Heavy metal ions were noted to be efficiently removed from the constituted solution with the selectivity order of Cu²⁺ > Ni²⁺ > Zn²⁺. The adsorption process was pH-dependent, while the maximum adsorption was observed to occur at pH 5 to 6. Adsorption was fast as the equilibrium was established within 60 min. Maximum adsorption of the heavy metal ions at equilibrium was 46.09, 39.75, and 28.21 mg g for Cu²⁺, Ni²⁺, and Zn²⁺, respectively. Adsorption data of all the three metals fit well the Langmuir adsorption isotherm model with 0.99 regression coefficient. Release of alkali and alkaline earth metal cations (Na⁺, K⁺, Ca²⁺, Mg²⁺) and protons H⁺ from MPW, during the uptake of Cu²⁺, Ni²⁺, and Zn²⁺, and EDX analysis of MPW, before and after the metal sorption process, revealed that ion exchange was the main mechanism of sorption. FTIR analysis showed that carboxyl and hydroxyl functional groups were involved in the sorption of Cu²⁺, Ni²⁺, and Zn²⁺. MPW was also shown to be highly effective in removing metal ions from the genuine electroplating industry effluent samples as it removed all the three metal ions to the permissible levels of discharge legislated by environment protection agencies. This study indicates that MPW has the potential to effectively remove metal ions from industrial effluents.     

Removal of Heavy Metal Ions from Water by Cross-Linked Potato Di-Starch Phosphate Polymer

Potato di-starch phosphate polymer was synthesized by cross-linking potato starch with phosphorus oxy-chloride in basic medium and was then dispersed (0.2-1%) in aqueous solutions of divalent heavy metal ions (Cu²⁺, Ni²⁺, Zn²⁺, and Pb²⁺), to investigate their removal efficiency by the starch and was found to increase with increase in the polymeric starch content and increase in the heavy metal ion concentration. The removal order was found to be Pb²⁺ (78.1%) > Cu²⁺ (58.5%) > Zn²⁺ (20.5%) > Ni²⁺ (17.3%) against the constant polymeric starch content. UV-Visible, Fluorescence, FT-IR, SEM, and CHN techniques were used for characterization of different complexes formed.     

Adsorption characteristics of metal ions by CO2-fixing Chlorella sp. HA-1

Single and binary metal systems were employed to investigate the removal characteristics of Pb²⁺, Cu²⁺, Cd²⁺, and Zn²⁺ by Chlorella sp. HA-1 that were isolated from a CO₂ fixation process. Adsorption test of single metal systems showed that the maximum metal uptakes were 0.767 mmol Pb²⁺, 0.450 mmol Cd²⁺, 0.334 mmol Cu²⁺ and 0.389 mmol Zn²⁺ per gram of dry cell. In the binary metal systems, the metal ions on Chlorella sp. HA-1 were adsorbed selectively according to their adsorption characteristics. Pb²⁺ ions significantly inhibited the adsorption of Cu²⁺, Zn²⁺, and Cd²⁺ ions, while Cu²⁺ ions decreased remarkably the metal uptake of Cd²⁺ and Zn²⁺ ions. The relative adsorption between Cd²⁺ and Zn²⁺ ions was reduced similarly by the presence of the other metal ions.     

Terpyridine‐Functionalized TentaGel Microbeads: Synthesis,Metal Chelation and First Sequential Complexation

The functionalization of polystyrene/poly(ethylene glycol) TentaGel® microbeads (d = 20 μm) with 2,2′:6′,2″‐terpyridine units is described resulting in a material with easily accessible ligands which possess an excellent affinity for transition metal ions. The subsequent loading with different metal ions via metal‐to‐ligand complexation yielded the corresponding Co^II, Ni^II, Fe^II, and Cu^II modified beads. The isolated materials were investigated in detail utilizing UV/vis spectroscopy, optical microscopy, atomic absorption spectroscopy (AAS), scanning electron microscopy (SEM), and atomic force microscopy (AFM). Moreover, grafting of free terpyridine moieties via ruthenium(II )/ruthenium(III )‐chemistry onto the beads is demonstrated. This opens‐up new pathways for the selective modification of such microbeads and the preparation of functional materials.

Scheme of the formation of bis‐terpyridine‐metal complexes bound to polystyrene/poly(ethylene glycol) TentaGel® microbeads.     

Chelation ion‐exchange study of copolymer resin derived from 8‐hydroxyquinoline 5‐sulphonic acid,oxamide, and formaldehyde

Copolymers (8‐HQ5‐SAOF) were synthesized by the condensation of 8‐hydroxyquinoline 5‐sulphonic acid (8‐HQ5‐SA) and oxamide (O) with formaldehyde (F) in the presence of acid catalyst. Four different copolymers were synthesized by using varied molar proportion of the reacting monomers. Copolymer resin composition has been determined on the basis of their elemental analysis and average molecular weights of these resins were determined by conductometric titration in nonaqueous medium. Viscometric measurement in dimethyl sulphoxide (DMSO) has been carried out with a view to ascertain the characteristic functions and constants. Electronic spectra, FTIR, and proton nuclear magnetic resonance spectra were studied to elucidate the structures. The newly synthesized copolymer proved to be a selective chelating ion‐exchange copolymer for certain metals. The chelating ion‐exchange properties of this synthesized copolymer was studied for different metal ions such as Fe³⁺, Cu²⁺, Ni²⁺, Co²⁺, Zn²⁺, Cd²⁺, and Pb²⁺. A batch equilibrium method was used in the study of the selectivity of metal ion uptake involving the measurements of the distribution of a given metal ion between the copolymer sample and a solution containing the metal ion only for representative copolymer 8‐HQ5‐SAOF‐I due to economy of space. The study was carried out over a wide pH range, shaking time, and in media of various ionic strengths. The copolymer showed a higher selectivity for Fe³⁺, Cu²⁺, and Ni²⁺ ions than for Co²⁺, Zn²⁺, Cd²⁺, and Pb²⁺ ions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010