The influence of molecular weight on the properties of polyacetal/hydroxyapatite nanocomposites. Part 1. Microstructural analysis and phase transition studies

In this work the influence of molecular weight of three polyoxymethylene (POM) copolymers on the properties of (POM)/hydroxyapatite (HAp) nanocomposites for long-term bone implants have been investigated by various physicochemical methods. Electron microscopy observations confirmed uniform dispersion of HAp in the polymer matrix, whereby DSC results show that HAp influences the degree of crystallinity of POM matrix. Temperature modulated differential scanning calorimetry (TMDSC) was applied to study the melting and recrystallization processes of POM matrix—it was found that with decreasing of POM molecular weight the amout of reversible melting increases. WAXD results show no shift in 2θ for pure POM copolymers and all POM/hydroxyapatite nanocomposites, indicating that the addition of HAp does not change the hexagonal system of POM. For all three copolymers, Young’s modulus increases with increasing hydroxyapatite concentration, whereby elongation at break decreases. On the contrast, HAp concentration does not have a significant influence on the tensile strength.     

The influence of molecular weight on the properties of polyacetal/hydroxyapatite nanocomposites. Part 2. In vitro assessment

A series of polyoxymethylene (POM)/hydroxyapatite (HAp) nanocomposites for long-term bone implants were prepared by melt processing using POM with different molecular weight. Bioactivity was examined by incubating the samples in simulated body fluid. Moreover, in vitro stability, wettability, thermal stability, and formaldehyde release process were investigated. Results of in vitro investigations show that an increase in HAp content in POM nanocomposites facilitates the formation of an apatite layer on the sample surface. There is no significant influence of HAp concentration on the contact angle values as revealed by wettability studies. Thermogravimetric analysis results indicate that with an increase in HAp content the thermal stability of POM matrix decreases significantly depending upon the POM molecular weight. Finally, it was found the amount of formaldehyde leached out of the samples during the incubation period depends on the HAp content: amounts in excess of 3 ppm were emitted for the samples containing only 10% HAp.     

Synthesis and characterisation of laminated HAp/PMMA nanocomposites by one-step intercalative bulk polymerisation

Abstract

Layered organic/inorganic nanocomposites have been widely investigated in recent years. In this work, for the first time, the authors prepared laminated hydroxyapatite (HAp)/poly(methyl metacrylate) (PMMA) nanocomposites via one-step intercalative bulk polymerization. X-ray diffraction (XRD) and scanning electron microscopy (SEM) results revealed that different morphologies of PMMA/HAp nanocomposites were obtained by varying HAp contents. Differential scanning calorimetry (DSC) and tensile strength analysis indicated that both thermal stability and tensile strength were enhanced with incorporation of laminated HAp. The results reported here can be expanded to other HAp polymer systems, thus paving a new way of designing and fabricating biomimetic nanocomposites for biomedical applications.     

Mechanical properties of (poly(L‐lactide‐co‐glycolide))‐based fibers coated with hydroxyapatite layer

This article presents the results of the experimental study on manufacturing and mechanical evaluation of poly(L ‐lactide‐co‐glycolide) (PLGA)‐based fibers modified with ceramic nanoparticles. Study was conducted to establish the effect of biomimetic formation of apatite layers on polymeric fibers on their mechanical properties. The tensile tests were performed to determine the influence of polymer crystallinity and the presence of hydroxyapatite nanoparticles (nanoHAp) on mechanical properties of PLGA fibers coated with hydroxyapatite (HAp) layer. HAp deposits on the surfaces of the fibers precipitated from simulated body fluid (SBF). Three types of fibers coated with HAp layers were compared in mechanical tests. The results indicated that by using a biomimetic fiber coating method the mechanical properties of the fibers are affected by their crystallinity. The nanoHAp modified polymer fibers after incubation in SBF were found to have a continuous HAp layer. The layer affected the mechanical behavior (force–strain function) of the fibers from nonlinear to linear, typical of ceramic materials. The tensile modulus of the fibers with a continuous layer was found to increase with the apatite layer thickness, whereas the tensile strength decreases. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Poly(L‐lactic acid) nanocomposites with layered double hydroxides functionalized with ibuprofen

The detrimental effect of cell adhesion on polymer surfaces has been a limiting factor in the medical deployment of many implants. We examined the potential to decrease cell proliferation while simultaneously increasing mechanical performance through Zn–Al layered double hydroxide (LDH) organically modified with ibuprofen dispersed in poly(L ‐lactic acid) (PLLA). These composites are commonly referred to as nanocomposites. The thermophysical and mechanical properties of the hybrids were studied with wide‐angle X‐ray diffraction (WAXD), transmission electron microscopy (TEM), differential scanning calorimetry, thermogravimetric analysis, dynamic mechanical analysis, and tensile testing. The WAXD and TEM results indicated that intercalated and exfoliated nanocomposites were obtained. The storage modulus, tensile modulus, and ultimate tensile strength were improved. The LDH affected the cold crystallization and reduced the thermal stability of the neat PLLA. Smooth muscle cells were used for in vitro studies of the nanocomposites. It was found that the hybrids reduced cell proliferation, and the amount of cell reduction was related to ibuprofen release. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Effect of sepiolite on the crystallization behavior of biodegradable poly(lactic acid) as an efficient nucleating agent

To enhance the crystallization kinetics of poly(lactic acid) (PLA), fibrous sepiolite was explored for nucleating the crystallization of PLA. PLA/sepiolite nanocomposites were prepared via the melt‐extrusion method. The effect of sepiolite on the crystallization behavior, spherulite growth and crystal structure of PLA were investigated by means of differential scanning calorimetry (DSC), polarized optical microscope (POM), wide angle X‐ray diffraction (WAXD), Fourier transform infrared (FTIR), and scanning election microscope (SEM). On the basis of DSC and POM results, the overall crystallization kinetics of PLA/sepiolite nanocomposites were significantly enhanced leading to higher crystallinity and nucleation density, faster spherulite growth rate (G) and lower crystallization half‐time (t_1/2) compared with the neat PLA. Under non‐isothermal conditions, the PLA blend comprising 1.0 wt% of sepiolite still revealed two crystallization peaks upon cooling at a rate of 35°C/min. Above phenomena strongly suggested that sepiolite was an effective nucleating agent for PLA. FTIR and WAXD analyses confirmed that the crystal structure of PLA matrix was the most common α‐form. SEM micrographics illustrated the fine three‐dimensional spherulite structures with the lath‐shape lamellae regularly arranged in radial directions. POLYM. ENG. SCI., 55:1104–1112, 2015. © 2014 Society of Plastics Engineers     

Preparation and characterization of carbon nanofiber reinforced thermoplastic polyurethane nanocomposites

The effect of CNFs on hard and soft segments of TPU matrix was evaluated using Fourier transform infrared (FTIR) spectroscope. The dispersion and distribution of the CNFs in the TPU matrix were investigated through wide angle X‐ray diffraction (WAXD), field emission scanning electron microscope (FESEM), high resolution transmission electron microscope (HRTEM), polarizing optical microscope (POM), and atomic force microscope (AFM). The thermogravimetric analysis (TGA) showed that the inclusion of CNF improved the thermal stability of virgin TPU. The glass transition temperature (T_g), crystallization, and melting behaviors of the TPU matrix in the presence of dispersed CNF were observed by differential scanning calorimetry (DSC). The dynamic viscoelastic behavior of the nanocomposites was studied by dynamical mechanical thermal analysis (DMTA) and substantial improvement in storage modulus (E') was achieved with the addition of CNF to TPU matrix. The rheological behavior of TPU nanocomposites were tested by rubber processing analyzer (RPA) in dynamic frequency sweep and the storage modulus (G') of the nanocomposites was enhanced with increase in CNF loading. The dielectric properties of the nanocomposites exhibited significant improvement with incorporation of CNF. The TPU matrix exhibits remarkable improvement of mechanical properties with addition of CNF. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Mechanical,morphological, and thermal properties of nanotalc reinforced PA6/SEBS‐g‐MA composites

Ternary butylene‐styrene‐g‐maleic anhydride (SEBS‐g‐MA) (100/20 w/w) blend with varying content of nanotalc (1, 3, and 5 wt %) were prepared by melt compounding followed by injection molding. Thermal properties were investigated by thermogravimetric analysis (TGA) and the results show that the thermal properties of nanocomposites are slightly improved by the addition of nanotalc content. The morphology of nanocomposites using wide angle X‐ray diffraction (WAXD) and transmission electron microscopy (TEM) revealed the delamination of talc layers in the ternary nanocomposites. The dynamic mechanical properties of the samples were analyzed by using dynamic mechanical thermal analyzer (DMTA). The results show that the storage modulus of the blend monotonically increased while tan δ curve show the diffuse pattern with the nanotalc content. The mechanical properties of PA6/SEBS‐g‐MA nanocomposites were studied by tensile, flexural, and impact tests. The tensile and flexural properties continuously increased while izod impact and elongation‐at‐break decreased with nanotalc content. Various theoretical predictive models were used to correlate tensile modulus with the experimental data. The experimental data shows the positive deviation with the applied models. Bela Pukanszky model has been used to calculate the value of parameter B by employing tensile strength data. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41381.     

Interfacial crystallization of low‐crystallinity elastomer incorporated by multi‐walled carbon nanotubes: Mechanical reinforcement,structural evolution and enhanced thermal stability

In this paper, we report interfacial crystallization in olefin block copolymer (OBC) with low crystallinity incorporated by multi‐walled carbon nanotubes (MWCNTs). A hybrid shish‐kebab (HSK) superstructure in nanocomposites is observed that MWCNTs act as central shish and OBC crystals grow perpendicular to the nanotubes axis. The mechanical properties of nanocomposites are significantly improved with incorporation of MWCNTs. The most ideal reinforcing and toughening effect is both observed in nanocomposites with MWCNTs content of 1 wt % that can increase tensile strength by 122% as well as elongation at break by 36%. Efficient load transfer are confirmed with in‐situ Raman spectra that G’ band of MWCNTs in OBC matrix exhibit a downshifting trend and symmetric broadening of line shape which reveals additional macroscale strain from axial extension of MWCNTs in nanocomposites, thus suggesting a certain load is carried by HSK superstructure. The structural evolution of OBC and nanocomposites are investigated by in‐situ wide‐angle X‐Ray Diffraction (WAXD). The Herman's orientation factor of nanocomposites with 2 wt % MWCNTs incorporation is lower than that of neat matrix at mall and intermediate strains, indicating a heterogeneous stress distribution and low compliance of HSK superstructure, which is consistent with in‐situ Raman results. Moreover, the nanocomposites presents significantly enhanced thermal stability. The onset decomposition temperature of nanocomposites with 3 wt % MWCNTs can be 60.2°C higher than that of neat OBC. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42368.     

Combined effect of organic phosphate sodium and nanoclay on the mechanical properties and crystallization behavior of isotactic polypropylene

Combined effect of α‐nucleating agent (NA) sodium 2,2′‐methylene‐bis(4,6‐di‐tert‐butylphenyl) phosphate (NA11) and nanoclay (NC) on the mechanical properties and crystallization behavior of isotactic polypropylene (iPP) was investigated by mechanical testing, wide‐angle X‐ray scattering (WAXD), differential scanning calorimetry (DSC), polarized optical microscopy (POM), and scanning electron microscopy (SEM). The mechanical testing results indicated that the separate addition of NA11 and NC only increased the stiffness of iPP while the combined addition of NA11, NC, and maleic anhydride grafted polypropylene (PP‐g‐MA) simultaneously improved stiffness and toughness of iPP. Compared to pure iPP, the tensile strength, the flexural modulus, and impact strength of iPP composites increased 9.7, 38.6, and 42.9%, respectively. The result indicated good synergistic effects of NC, NA11, and PP‐g‐MA in improving iPP mechanical properties. WAXD patterns revealed NA11, and NC only induced the α‐crystals of iPP. SEM micrograph showed that the PP‐g‐MA could effectively improve the dispersing of NC in iPP. Finally, the nonisothermal crystallization kinetics of neat iPP and PP nanocomposites was described by Caze method. The result indicated that the addition of NA overcame the shortcoming of low crystallization rate of NC nanocomposites and maintained the excellent mechanical properties, which is another highlight of the combined addition of NAs and nanoclay. Meanwhile, the result showed that nuclei formation and spherulite growth of iPP were affected by the presence of NA and nanoclay. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Mechanical properties and morphologies of polypropylene composites synergistically filled by styrene‐butadiene rubber and silica nanoparticles

The mechanical properties and morphologies of PP/SBR/SiO₂ nanocomposites have been studied using mechanical testing, wide‐angle X‐ray diffraction (WAXD), polarizing optical microscopy (POM), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The mechanical properties of neat polypropylene can be considerably improved by synergistically filling with SiO₂ and SBR nanoparticles, especially for the notched Izod impact strength. The results from the WAXD, POM, SEM, DSC, and TGA measurements reveal that: (i) the β‐phase crystal structure of PP is formed when SiO₂ and SBR nanoparticles are synergistically filled with polypropylene and its formation plays a role for the enhancement of the impact strength for PP/SBR/SiO₂ nanocomposites; (ii) the dispersion of SiO₂ and SBR nanoparticles in PP/SBR/SiO₂ composites is homogeneous, indicating that synergistic incorporating method decreases the aggregation of nanoparticles and thus increases the sites for dissipation of shock for impact energy in PP/SBR/SiO₂ nanocomposites; (iii) the thermal analysis shows high thermal stability for the PP/SBR/SiO₂ nanocomposites. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Compatibilizing effect of halloysite nanotubes in polar–nonpolar hybrid system

This article explores the effect of halloysite nanotubes (HNTs) and modified HNTs (M‐HNTs) on the properties of immiscible blend system based on polar polyoxymethylene (POM) and nonpolar polypropylene (PP) polymers. HNTs have been modified by N‐(β‐aminoethyl)‐γ‐aminopropyltrimethoxysilane (APTMS). Modification is confirmed by Fourier transform infrared spectroscopy (FTIR), also FTIR confirms the interaction between polymer blend and HNTs/M‐HNTs. Morphology of the nanocomposites are demonstrated by scanning electron microscope (SEM) and dispersion of HNTs/M‐HNTs are observed by transmission electron microscope (TEM). In nanocomposites, average dispersed domain sizes reduce in the presence of HNTs/M‐HNTs but significant reduction has been observed in the case of M‐HNT‐filled nanocomposites rather than unmodified HNT‐filled nanocomposites. The M‐HNT acts as a reinforcing agent as well as bridging tool in polar–nonpolar hybrid system. Modification of HNTs brings compatibility in between the blend partners and reveals improved dynamic mechanical, thermal, and tensile properties than that of the pure blend system. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39587.     

Thermomechanical properties of poly(lactic acid) films reinforced with hydroxyapatite and regenerated cellulose microfibers

Novel composite films constituted of poly(lactic acid) (PLA), hydroxyapatite (HAp), and two types of regenerated cellulose fillers—particulate and fibrous type—were produced by melt extrusion in a twin‐screw micro‐compounder. The effect of the film composition on the tensile and dynamic mechanical behavior and the HAp dispersion in the PLA matrix were investigated thoroughly. Appearance of crazed regions and prevention of HAp aggregation in the PLA matrix were elucidated in the composites with up to 15 wt % particulate cellulose content, which was the main reason for only slight reduction in the tensile properties, and consequently trivial degradation of their pre‐failure energy absorption as compared to neat PLA films. Superior dynamical energy storage capacities were obtained for the particulate cellulose modified composites, while their fibrous counterparts had not as good properties. Additionally, the anisotropic mechanical behavior obtained for the extruded composites should be favorable for use as biomaterials aimed at bone tissue engineering applications. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40911.     

Improvement of microstructures and properties of poly(lactic acid)/poly(ε‐caprolactone) blends compatibilized with polyoxymethylene

Incompatibility of poly(lactic acid)/poly(?‐caprolactone) (PLA/PCL) (80:20) and (70:30) blends were modified by incorporation of a small amount of polyoxymethylene (POM) (≤3 phr). Impact of POM on microstructures and tensile property of the blends were investigated. It is found that the introduction of POM into the PLA/PCL blends significantly improves their tensile property. With increasing POM loading from zero to 3 phr, elongation at break increases from 93.2% for the PLA/PCL (70:30) sample to 334.8% for the PLA/PCL/POM (70:30:3) sample. A size reduction in PCL domains and reinforcement in interfacial adhesion with increasing POM loading are confirmed by SEM observations. The compatibilization effect of POM on PLA/PCL blends can be attributed to hydrogen bonding between methylene groups of POM and carbonyl groups of PLA and PCL. In addition, nonisothermal and isothermal crystallization behaviors of PLA/PCL/POM (70:30:x) samples were investigated by using differential scanning calorimetry and wide angle X‐ray diffraction measurements. The results indicate that the crystallization dynamic of PLA matrix increases with POM loadings. It can be attributed to the fact that POM crystals have a nucleating effect on PLA. While crystallization temperature is 100 °C, crystallization half‐time can reduce from 9.4 to 2.0 min with increasing POM loading from zero to 3 phr. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46536.     

Phenolic resin-trisilanolphenyl polyhedral oligomeric silsesquioxane (POSS) hybrid nanocomposites: Structure and properties

The structure and properties of organic-inorganic hybrid nanocomposites prepared from a resole phenolic resin and a POSS mixture containing >95 wt% trisilanolphenyl POSS was investigated by POM (polarized optical microscopy), SEM, TEM, WAXD, FT-IR, DSC, and TGA techniques. Composites with 1.0-10.4 wt% of POSS were prepared by dissolving the POSS and the phenolic resin into THF, followed by solvent removal and curing. Both nano- and micro-sized POSS filler aggregates and particles were shown to be heterogeneously dispersed in the cured matrix by POM, TEM, SEM, and X-EDS. POSS was found everywhere, including in both dispersed phase domains and in the matrix. The nanocomposite morphology appears to form by a multi-step POSS aggregation during the process of phase separation. Both the matrix and dispersed ‘particulate’ phase domains are mixtures of phenolic resin and POSS. POSS micro-crystals act as the core of the dispersed phase. The bigger dispersed domains consist of smaller particles or aggregates of POSS molecules that exhibit some order but regions of matrix resin are interspersed. A WAXD peak at 2θ∼7.3° indicates crystalline order in the POSS aggregates. This characteristic peak's intensity increases with an increase in POSS loading, suggesting that more POSS molecules have aggregated or crystallized. FT-IR spectra confirm that hydrogen bonding exists between the phenolic resin and POSS Si-OH groups. This increases their mutual compatibility, but H-bonding does not prevent POSS aggregation and phase separation during curing. TGA measurements in air confirmed the temperature for 5% mass loss in increases with increase of POSS loading and at T>550° the thermal stability increases more sharply with POSS loading. The nanocomposite glass transition temperatures (T_g) are only slightly be affected by the POSS filler.     

Nucleation of Hydroxyapatite Crystal through Chemical Interaction with Collagen

The nucleation of hydroxyapatite (HAp) crystal through chemical interaction with collagen was investigated. A collagen membrane was soaked in a supersaturated simulated body fluid (1.5 SBF) solution with ion concentrations at 1.5 times that of normal simulated body fluid (1.0 SBF). A few carbonate-containing HAp crystals were formed mostly on the edge-side of the collagen membrane after 4 weeks. In the Fourier-transform infrared spectometry (FTIR) results, the carboxylate band of the collagen membrane showed red chemical shifts after the formation of HAp crystals, which coincided well with the decrease of the calculated bond orders of the carboxylate group when chelated with a calcium ion, which emulated the first-step nucleation of HAp crystal on the carboxylate group of collagen. The result implies that the binding of a calcium ion to the carboxylate group of collagen is one of the key factors for the nucleation of HAp crystals in a 1.5 SBF solution.     

Biomimetic apatite coating on P(EMA-co-HEA)/SiO2 hybrid nanocomposites

P(EMA-co-HEA)/SiO₂ nanocomposites with silica contents in the range of 0-30 wt% were prepared by co-polymerization of the organic monomers during the simultaneous sol-gel polymerization of the silica precursor. The ability of the hybrids to form hydroxyapatite (HAp) on their surfaces was tested in vitro by soaking the samples in a simulated body fluid (SBF) solution for different times up to 35 days. On the one hand, the composition and morphology of the HAp layer formed were characterized by SEM, EDS, FTIR and XRD; on the other, the exchange of soluble silicates and calcium and phosphate ions, and the structural changes taking place in the nanohybrids when immersed in SBF were analyzed by SEM/EDS. This is, up to our knowledge, the first time the HAp nucleation mechanism has been proposed for organic-silica nanohybrids and correlated with their respective nanostructures. The results revealed that the formation of a HAp coating was in all cases limited by the nucleation induction time, but the mechanism and rate of HAp nucleation were found to be different depending on the nanostructure of the samples, which differs, in turn, with the silica content as a consequence of the differing connectivity of the silica network. The nanohybrids with silica contents in the range of 10-20 wt% proved to be the most suitable for the development of bioactive synthetic scaffolds for bone or other mineralized tissues.     

Influence of organic modification on mechanical properties of melt processed intercalated poly(methyl methacrylate)–organoclay nanocomposites

The influence of organic modifiers on intercalation extent, structure, thermal and mechanical properties of poly(methyl methacrylate) (PMMA)–clay nanocomposites were studied. Two different organic modifiers with varying hydrophobicity (single tallow versus ditallow) were investigated. The nanocomposites were prepared from melt processing method and characterized using wide angle X‐ray diffraction, transmission electron microscopy, thermogravimetric analysis, differential scanning calorimetry (DSC), and tensile tests. Mechanical properties such as tensile modulus (E), break stress (σ_brk), and % break strain (ε_brk) were determined for nanocomposites at various clay loadings. Extent of PMMA intercalation is sufficient and in the range 9–15 Å depending on organoclay and filler loading. Overall thermal stability of nanocomposites increases by 16–30°C. The enhancement in T_g of nanocomposite is merely by 2–4°C. With increase in clay loading, tensile modulus increases linearly while % break strain decreases. Break stress is found to increase till 4 wt % and further decreases at higher clay loadings. The overall improvement in thermal and mechanical properties was higher for the organoclay containing organic modifier with lower hydrophobicity and single tallow amine chemical structure. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Effect of clay on mechanical and gas barrier properties of blown film LDPE/clay nanocomposites

Low density polyethylene (LDPE)/clay nanocomposites, which can be used in packaging industries, were prepared by melt‐mix organoclay with polymer matrix (LDPE) and compatibilizer, polyethylene grafted maleic anhydride (PEMA). The pristine clay was first modified with alkylammonium salt surfactant, before melt‐mixed in twin screw extruder attached to blown‐film set. D‐spacing of clay and thermal behavior of nanocomposites were characterized by Wide‐Angle X‐ray Diffraction (WAXD) and differential scanning calorimetry (DSC), respectively. WAXD pattern confirmed the increase in PEMA contents exhibited better dispersion of clay in nanocomposites. Moreover, DSC was reported the increased PEMA contents caused the decrease in degree of crystallinity. Mechanical properties of blown film specimens were tested in two directions of tensile tests: in transverse tests (TD tests) and in machine direction tests (MD tests). Tensile modulus and tensile strength at yield were improved when clay contents increased because of the reinforcing behavior of clay on both TD and MD tests. Tensile modulus of 7 wt % of clay in nanocomposite was 100% increasing from neat LDPE in TD tests and 17% increasing in MD tests. However, elongation at yield decreased when increased in clay loading. Oxygen permeability tests of LDPE/clay nanocomposites also decreased by 24% as the clay content increased to 7 wt %. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Biocompatibility,physico-chemical and mechanical properties of hydroxyapatite-based silicon dioxide nanocomposites for biomedical applications

High-energy ball milling was employed to prepare carbonated hydroxyapatite/silicon dioxide (CHA/SiO₂) nanocomposites. Then, these nanocomposite powders were sintered at 900 and 1300 °C. XRD technique, FTIR spectroscopy and SEM were employed to examine the structure, molecular structure and microstructure of the sintered nanocomposites samples, respectively. Moreover, their mechanical properties were also measured. Furthermore, in vitro bioactivity and cytotoxicity of these nanocomposites were evaluated. The results indicated that the successive increases in SiO₂ contents led to remarkable enhancement for densification behavior, mechanical properties and in vitro bioactivity of nanocomposites sintered at 900 °C. However, further increase in the sintering temperature to 1300 °C caused dramatic decreases in density and mechanical properties of nanocomposites. On the contrary, better bioactivity behavior was achieved. Amazingly, the obtained results revealed that the sample having the highest content of SiO₂ and sintered at 900 °C had no toxic effects on bone-like cells while, that sintered at 1300 °C exhibited mild cytotoxicity. Based on the variations in the abovementioned properties, these nanocomposites can be used in different biomedical applications.