Green fabrication route of robust,biodegradable silk sericin and poly(vinyl alcohol) nanofibrous scaffolds

Silk sericin (SS) has been extensively used to fabricate scaffolds for tissue engineering. However, due to its inferior mechanical properties, it has been found to be a poor choice of material when being electrospun into nanofibrous scaffolds. Here, SS has been combined with poly(vinyl alcohol) (PVA) and electrospun to create scaffolds with enhanced physical properties. Crucially, these SS/PVA nanofibrous scaffolds were created using only distilled water as a solvent with no added crosslinker in an environmentally friendly process. Temperature has been shown to have a marked effect on the formation of the SS sol–gel transition and thus influence the final formation of fibers. Heating the spinning solutions to 70 °C delivered nanofibers with enhanced morphology, water stability and mechanical properties. This is due to the transition of SS from β‐sheets into random coils that enables enhanced molecular interactions between SS and PVA. The most applicable SS/PVA weight ratios for the formation of nanofibers with the desired properties were found to be 7.5/1.5 and 10.0/1.5. The fibers had diameters ranging from 60 to 500 nm, where higher PVA and SS concentrations promoted larger diameters. The crystallinity within the fibers could be controlled by manipulation of the balance between PVA and SS loadings. In vitro degradation (in phosphate buffer solution, pH 7.4 at 37 °C) was 30–50% within 42 days and fibers were shown to be nontoxic to skin fibroblast cells. This work demonstrates a new green route for incorporating SS into nanofibrous fabrics, with potential use in biomedical applications. © 2019 Society of Chemical Industry     

Herbally derived polymeric nanofibrous scaffolds for bone tissue regeneration

Hydroxyapatite (HA), the bone mineral and Cissus quadrangularis (CQ), a medicinal plant with osteogenic activity, are attaining increasing interest as a potential therapeutic agent for enhanced bone tissue regeneration. In the present study a synergistic effect of these two agents were analyzed by fabricating PCL‐CQ‐HA nanofibrous scaffolds by electrospinning and compared with PCL‐CQ and PCL (control) nanofibrous scaffolds. Morphology, composition, hydrophilicity, and mechanical properties of the electrospun PCL, PCL‐CQ, PCL‐CQ‐HA nanofibrous scaffolds were examined by Field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), Contact angle and Tensile tests, respectively. The response of human foetal osteoblast cells on these scaffolds were evaluated using MTS assay, alkaline phosphatase activity, alizarin red staining, and osteocalcin expression for bone tissue regeneration. While the observed cellular response to both groups of scaffolds was better than for the control PCL scaffold, the PCL‐CQ‐HA nanofibrous scaffolds provided the most favorable substrate for cell proliferation and mineralization. The results showed that PCL‐CQ‐HA nanofibrous scaffolds had appropriate surface roughness for the osteoblast adhesion, proliferation, and mineralization comparing with other scaffolds. The observed investigation of physicochemical and biological properties suggests that the CQ‐HA loaded PCL nanofibrous scaffolds serve as a potential biocomposite material for bone tissue engineering. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39835.     

Preparation and characterization of Calendula officinalis-loaded PCL/gum arabic nanocomposite scaffolds for wound healing applications

Medicinal plants such as Calendula officinalis (C. officinalis) are commonly used for skin wounds’ treatment. On the other hand, gum arabic (GA) has a lot of potential for use in wound healing because of its unique physio-chemical properties. Wound healing activity of gum arabic (GA) and Calendula officinalis (C. officinalis) along with good mechanical properties of poly (ε-caprolactone) (PCL) can produce a suitable nanofibrous scaffold for skin tissue engineering as well as wound dressing application. In this study, PCL/C. officinalis/GA nanofibrous scaffolds with diameter distribution in the range of 85–290 nm were prepared via electrospinning. Characteristics of the nanofibrous scaffolds, i.e., morphology, scaffold compounds, porosity, mechanical and antibacterial properties, hydrophilicity and degradability in phosphate buffer saline (PBS) were investigated. Cell viability and proliferation of scaffolds were evaluated by MTT [3-(4,5-dimethylthiazol-2-yl)-2, 5-diphenyl tetrazolium bromide] assay. Results indicated that hydrophilicity of the PCL/C. officinalis/GA scaffolds was higher than the PCL scaffold. The tensile strength and elongation of the PCL/C. officinalis/GA scaffolds were in the range of 2.13–4.41 MPa and 26.37–74.37%, respectively, which are very suitable for skin tissue engineering. The porosity of the scaffolds was higher than 60% and was appropriate for the proliferation of fibroblast cells. The nanocomposite scaffold also showed suitable degradability and antimicrobial activity. Moreover, cell culture indicated that GA and C. officinalis promoted cell attachment and proliferation. It can be concluded that the nanofibrous calendula-loaded PCL/GA scaffolds are well suited for regenerating skin.

     

Influence of Post-Treatment with 75% (v/v) Ethanol Vapor on the Properties of SF/P(LLA-CL) Nanofibrous Scaffolds

In order to improve the water-resistant ability of silk fibroin (SF) and SF/P(LLA-CL) blended nanofibrous scaffolds for tissue engineering applications, 75% (v/v) ethanol vapor was used to post-treat electrospun nanofibers. SEM indicated that the treated SF and SF/P(LLA-CL) nanofibrous scaffolds maintained a nanofibrous structure and possessed good water-resistant ability. Characterization of (13)C CP-MAS NMR clarified that 75% (v/v) ethanol vapor could induce SF conformation from random coil or α-helix to β-sheet. Although the water contact showed that treated SF/P(LLA-CL) blended nanofibrous scaffolds were hydrophobic, the water uptake demonstrated that their hydrophilicity was greatly superior to those of pure P(LLA-CL) nanofibrous scaffolds. Furthermore, the treated SF/P(LLA-CL) nanofibrous scaffolds, both in dry state and wet state, could retain good mechanical properties. Therefore, 75% (v/v) ethanol vapor treatment might be an ideal method to treat SF and SF/P(LLA-CL) nanofibrous scaffolds for biomedical applications.     

Nanohydroxyapatite-coated hydroxyethyl cellulose/poly (vinyl) alcohol electrospun scaffolds and their cellular response

The present study focused on the preparation of nanohydroxyapatite (nHA)-coated hydroxyethyl cellulose/polyvinyl alcohol (HEC/PVA) nanofibrous scaffolds for bone tissue engineering application. The electrospun HEC/PVA scaffolds were mineralized via alternate soaking process. FESEM revealed that the nHA was formed uniformly over the nanofibers. The nHA mineralization enhanced the tensile strength and reduced the elongation at breakage of scaffolds. The wettability of the nanofibrous scaffolds was significantly improved. The in vitro biocompatibility of scaffolds was evaluated with human osteosarcoma cells. nHA-coated scaffolds had a favorable effect on the proliferation and differentiation of osteosarcoma cell and could be a potential candidate for bone regeneration.     

Nanofibrous scaffold prepared by electrospinning of poly(vinyl alcohol)/gelatin aqueous solutions

A series of nanofibrous scaffolds were prepared by electrospinning of poly(vinyl alcohol) (PVA)/gelatin aqueous solution. PVA and gelatin was dissolved in pure water and blended in full range, then being electrospun to prepared nanofibers, followed by being crosslinked with glutaraldehyde vapor and heat treatment to form nanofibrous scaffold. Field emission scanning electron microscope (FESEM) images of the nanofibers manifested that the fiber average diameters decreased from 290 to 90 nm with the increasing of gelatin. In vitro degradation rates of the nanofibers were also correlated with the composition and physical properties of electrospinning solutions. Cytocompatibility of the scaffolds was evaluated by cells morphology and MTT assay. The FESEM images revealed that NIH 3T3 fibroblasts spread and elongated actively on the scaffolds with spindle‐like and star‐type shape. The results of cell attachment and proliferation on the nanofibrous scaffolds suggested that the cytotoxicity of all samples are grade 1 or grade 0, indicating that the material had sound biosafety as biomaterials. Compared with pure PVA and gelatin scaffolds, the hybrid ones possess improved biocompatibility and controllability. These results indicate that the PVA/gelatin nanofibrous have potential as skin scaffolds or wound dressing. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Fabrication of a Nanofibrous Scaffold for the In Vitro Culture of Cardiac Progenitor Cells for Myocardial Regeneration

In this study, random Poly (?-caprolactone) (PCL):Poly glycolic acid (PGA) nanofibrous scaffold with various PCL:PGA compositions were fabricated by electrospinning method. The nanofibrous scaffolds were characterized by SEM, contact angle measurement, ATR-FTIR, and tensile measurements. The results showed that with the increase of the concentration of PGA in spinning blend solution, the average diameter of nanofibers, hydrophilicity, and mechanical properties of the nanofibrous scaffolds increased. An in vitro degradation study of PCL:PGA nanofibers were conducted in phosphate-buffered saline, pH 7.2. The experiments confirm that increasing of PGA provides faster degradation rate in blended nanofibers. To assay the biocompatibility and cell behavior on the nanofibrous scaffolds, cell attachment and spreading of cardiac progenitor cells seeded on the scaffolds were studied. The results indicate that among electrospun nanofibrous scaffolds, the most appropriate candidate for myocardial tissue engineering scaffolds is PCL:PGA (65:35).     

Application of low loading of collagen in electrospun poly[(l‐lactide)‐co‐(ε‐caprolactone)] nanofibrous scaffolds to promote cellular biocompatibility

Electrospinning of various polymers has been used to produce nanofibrous scaffolds that mimic the extracellular matrix and support cell attachment for the potential repair and engineering of nerve tissue. In the study reported here, an electrospun copolymer of l ‐lactide and ε‐caprolactone (67:33 mol%) resulted in a nanofibrous scaffold with average fibre diameter and pore size of 476 ± 88 and 253 ± 17 nm, respectively. Blending with low loadings of collagen (<2.5% w/w) significantly reduced the average diameter and pore size. The uniformity of fibre diameter distributions was supported with increasing collagen loadings. The nanofibrous scaffolds significantly promoted the attachment and proliferation of olfactory ensheathing cells compared to cells exhibiting asynchronous growth. Furthermore, analysis of cell health through mitochondrial activity, membrane leakage, cell cycle progression and apoptotic indices showed that the nanofibrous membranes promoted cell vigour, reducing necrosis. The study suggests that the use of more cost‐effective, low loadings of collagen supports morphological changes in electrospun poly[(l ‐lactide)‐co‐(ε‐caprolactone)] nanofibrous scaffolds, which also support attachment and proliferation of olfactory ensheathing cells while promoting cell health. The results here support further investigation of the electrospinning of these polymer blends as conduits for nerve repair. © 2013 Society of Chemical Industry     

Poly(l-lactide-co-?-caprolactone) electrospun nanofibers for encapsulating and sustained releasing proteins

The aim of this study was to investigate coaxial electrospun poly(l-lactide-co-?-caprolactone) [PLLACL] nanofibers for the application in nerve tissue engineering. The hypothesis was that the nanofibrous mats fabricated by coaxial electrospun PLLACL could be effective scaffolds for releasing proteins, such as Bovine Serum Albumin (BSA) or/and Nerve Growth Factor (NGF), in a sustained manner. To test the hypothesis, the coaxial electrospun nanofibers with PLLACL as the shell and BSA/NGF as the core were characterized. Morphologies and mechanical properties of nanofibrous mats were examined. BSA released behavior was studied. The results demonstrated that BSA could be sustainedly released from coaxial electrospun PLLACL nanofibers, however, BSA released from mix electrospun nanofibers present the burst release behavior. Bioactivity of released NGF from coaxial electrospun nanofibers was verified by testing the differentiation of rat pheochromocytoma cells (PC12).     

Fabrication of PLA/PEG/MWCNT electrospun nanofibrous scaffolds for anticancer drug delivery

In the present study, polylactic acid (PLA)/polyethylene glycol (PEG)/multiwalled carbon nanotube (MWCNT) electrospun nanofibrous scaffolds were prepared via electrospinning process and their applications for the anticancer drug delivery system were investigated. A response surface methodology based on Box–Behnken design (BBD) was used to evaluate the effect of key parameters of electrospinning process including solution concentration, feeding rate, tip–collector distance (TCD) and applied voltage on the morphology of PLA/PEG/MWCNT nanofibrous scaffolds. In optimum conditions (concentration of 8.15%, feeding rate of 0.2 mL/h, voltage of 18.50 kV and TCD of 13.0 cm), the minimum experimental fiber diameter was found to be 225 nm which was in good agreement with the predicted value by the BBD analysis (228 nm). In vitro drug release study of doxorubicin (DOX)‐loaded nanofibrous scaffolds, higher drug content induced an extended release of drug. Also, drug release rate was not dependent on drug/polymer ratio in different electrospun nanofibrous formulations. The equation of M_t = c₀ + kt^0.5was used to describe the kinetic data of DOX release from electrospun nanofibers. The cell viability of DOX‐loaded nanofibrous scaffolds was evaluated using 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide, a tetrazole assay on lung cancer A549 cell lines. We propose that DOX‐incorporated PLA/PEG/MWCNT nanofibrous scaffold could be used as a superior candidate for antitumor drug delivery. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41286.     

Biocompatible polymeric electrospun matrices: Micro–nanotopography effect on cell behavior

This work reports a preliminary biological study performed on nanofibrous biocompatible polylactidecopolycaprolactone (PLA-PCL) scaffolds intended for tissue regeneration. The aim was to evaluate how matrix surface topography affects cell adhesion and proliferation. Scaffolds prepared by electrospinning either equipped with plane or rotating mandrel collectors, were characterized for their surface topography and nanofiber size. Cell culture studies were carried out using mouse embryonic fibroblast cells lines (NIH-3T3), as model for skin, murine neuroblastoma neuro-2α cell line, as model for neuronal tissue, and mouse mesenchymal stem cells (MSCs), because of their differentiation ability. Imaging analysis by scanning electron microscope and laser scanning confocal microscopy together with cell viability (MTT, L 3-(4,5-dymethiltiazol-2-y)-2,5 diphenyltetrazolium bromide) test, were performed on cell cultures at fixed time laps. The results showed that electrospun nanofibers supported growth and proliferation of the tested cell lines, but electrospun matrices obtained with rotating mandrel showed significantly higher cell viability that follows the orientation of electrospun nanofibers.     

Preparation of electrospun nanofibrous polycaprolactone scaffolds using nontoxic ethylene carbonate and glacial acetic acid solvent system

In recent years, solution electrospinning has attracted the interest of researchers due to the possibility to design nanofibrous scaffolds with large surface area to volume ratios. Polycaprolactone (PCL), because of its biocompatibility and easy processability, has been widely used to develop electrospun structures for tissue engineering. However, the use of organic solvents and the poor PCL solution stability still hinder the development of the solution electrospinning process. The relatively benign glacial acetic acid (GAC) as a solvent of PCL was used to fabricate microfibrous fibers or beaded fibers. Thus, ethylene carbonate (EC) as a nontoxic assistant solvent was added to the PCL/GAC solution to successfully fabricate electrospun nanofibrous PCL scaffolds. The stability of the PCL/GAC/EC solution system was demonstrated as the viscosity, which showed no significant change during 48 h. The ultrafine PCL fiber diameter decreased as EC concentration was increased from 0 to 9 vol% and started to slightly increase when EC concentration increased beyond 9 vol%. MTT assay evidenced that MC3T3-E1 cells on the nanofibrous PCL scaffolds exhibited a better enhancement on cell proliferation. In summary, EC was added in PCL/GAC to establish a stable and low toxic solution electrospinning system, which provides promising strategy in tissue engineering field. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48387.     

Protein encapsulated in electrospun nanofibrous scaffolds for tissue engineering applications

The main purpose of tissue engineering is the preparation of fibrous scaffolds with similar structural and biochemical cues to the extracellular matrix in order to provide a substrate to support the cells. Controlled release of bioactive agents such as growth factors from the fibrous scaffolds improves cell behavior on the scaffolds and accelerates tissue regeneration. In this study, nanofibrous scaffolds were fabricated from biocompatible and biodegradable poly(lactic‐co‐glycolic acid) through the electrospinning technique. Nanofibers with a core–sheath structure encapsulating bovine serum albumin (BSA) as a model protein for hydrophilic bioactive agents were prepared through emulsion electrospinning. The morphology of the nanofibers was evaluated by field‐emission scanning electron microscopy and the core–sheath structure of the emulsion electrospun nanofibers was observed by transmission electron microscopy. The results of the mechanical properties and X‐ray diffraction are reported. The scaffolds demonstrated a sustained release profile of BSA. Biocompatibility of the scaffolds was evaluated using the MTT (3(4,5‐ dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide) assay for NIH‐3T3 fibroblast cells. The results indicated desirable biocompatibility of the scaffolds with the capability of encapsulation and controlled release of the protein, which can serve as tissue engineering scaffolds. © 2013 Society of Chemical Industry     

Electrospun biocompatible poly (ε-caprolactonediol)-based polyurethane core/shell nanofibrous scaffold for controlled release of temozolomide

The electrospun biocompatible poly (ε-caprolactonediol)-based polyurethane (PCL-Diol-b-PU) core/shell nanofibrous scaffolds were prepared via the coaxial electrospinning process. Temozolomide (TMZ) as an anticancer drug was loaded into the core of fibers to control the release of TMZ for the treatment of glioblastoma. The properties of nanofibers were characterized using XRD, FTIR, SEM, and TEM analysis. The sustained delivery of TMZ without initial burst release was achieved from all prepared core–shell nanofibrous samples over 30 days. The cytotoxicity results revealed that the TMZ-loaded PCL-Diol-b-PU core–shell nanofibers could be used as a drug delivery implant to deliver TMZ against glioblastoma tumors.     

Ternary blend nanofibres of poly(lactic acid), polycaprolactone and cellulose acetate butyrate for skin tissue scaffolds: influence of blend ratio and polycaprolactone molecular mass on miscibility,morphology, crystallinity and thermal properties

Ternary blends of poly(lactic acid) (PLA), polycaprolactone (PCL) and cellulose acetate butyrate (CAB) were fabricated into the form of electrospun nanofibres targeted for skin tissue scaffolds. The effects of blend ratio and molecular mass of PCL (PCL1 and PCL2) on morphology, miscibility, crystallinity, thermal properties, surface hydrophilicity and cell culture of the nanofibres were investigated. Blends with high PLA loading (80/10/10 PLA/PCL/CAB) gave fibres with a smooth surface, owing to the enhanced miscibility between the polymer chains from the presence of CAB, which acts as compatibilizer. In contrast, blends with high PCL loading were immiscible, which led to beads during the electrospinning process. The increased molecular mass of PCL2 produced smoother fibres than low‐molecular‐mass PCL1. The XRD patterns of blends of PLA/PCL1/CAB and PLA/PCL2/CAB were similar to one another, in which the high‐crystallinity peaks of PCL seen for 20/70/10 blends were very small for 50/40/10 blends and much less prevalent for 80/10/10 blends. Better fibre formation (80/10/10 > 50/40/10 > 20/70/10) with less crystallinity occurs in well‐formed fibres. Selected blends of PLA/PCL/CAB promoted growth of NIH/3T3 fibroblast cells, demonstrating that our novel biocompatible ternary blend nanofibrous scaffolds have potential in skin tissue repair applications. In addition, this work helps in the design and understanding of the factors that control the properties of nanofibrous PLA/PCL/CAB scaffolds. © 2017 Society of Chemical Industry     

Aloe vera incorporated biomimetic nanofibrous scaffold: a regenerative approach for skin tissue engineering

Aloe vera (AV) is one of the medicinal herbs with a well-established spectrum of wound healing, antimicrobial and anti-inflammatory property. AV-mediated therapeutics present significant tissue regenerative activity by modulating the inflammatory and proliferative phases of wound healing. The purpose of the present work was to combine the biological properties of AV and the advantages of electrospun meshes to prepare a potent transdermal biomaterial. The polycaprolactone (PCL) containing 5 and 10 wt % of lyophilized powder of AV was studied for electrospinning into nanoscale fiber mats and compared with PCL/Collagen blend for dermal substitutes. SEM revealed the average diameters of PCL, PCL-AV 5 %, PCL-AV 10 % and PCL/Collagen nanofiber scaffolds in the range of 519 ± 28, 264 ± 46, 215 ± 63 and 249 ± 52 nm, respectively. PCL-AV 10 % nanofiber scaffolds showed finer fiber morphology with improved hydrophilic properties and higher tensile strength of 6.28 MPa with a Young’s modulus of 16.11 MPa desirable for skin tissue engineering. The nanofibers were then used to investigate differences in biological responses in terms of proliferation and cell morphology of mice dermal fibroblasts. It was found that PCL-AV 10 % nanofibrous matrix favored cell proliferation compared to other scaffolds which almost increased linearly by (p ≤ 0.01) 17.79 % and (p ≤ 0.01) 21.28 % compared to PCL on sixth and ninth day. CMFDA dye expression, secretion of collagen and F-actin expression were significantly increased in PCL-AV 10 % scaffolds compared to other nanofibrous scaffolds. The obtained results proved that the PCL-AV 10 % nanofibrous scaffold is a potential biomaterial for skin tissue regeneration.     

Modification of electrospun poly(L-lactic acid)/polyethylenimine nanofibrous scaffolds for biomedical application

In this study, modification of poly(L-lactic acid) (PLLA) electrospun nanofibrous scaffolds blending with polyethylenimine (PEI) in different blend ratios was performed. The sample with 85:15 blend ratio revealed most promising results, and was selected for further modification with gelatin. It was found that the presence of PEI could enhanced porosity, mechanical properties, surface/bulk hydrophilicity and also gelatin grafting density about five times with positive effect on cell behavior. The results indicated that the limitations of PLLA electrospun nanofibers for potential application as a functional tissue engineering scaffold (i.e., poor cell adhesion and necrosis of host tissues as a result of providing acidic environment while degradation) could be overcome through blending with PEI and grafting with gelatin.     

Enhanced chondrogenic differentiation of human bone marrow mesenchymal stem cells on PCL/PLGA electrospun with different alignments and compositions

The simultaneous effect of electrospun scaffold alignment and polymer composition on chondrogenic differentiation of human bone marrow mesenchymal stem cells (hBMMSC) is investigated. Aligned and randomly oriented polycaprolactone/poly(lactic-co-glycolic acid) (PLGA) hybrid electrospun scaffolds with two different ratios are fabricated by electrospinning. It is found that aligned nanofibrous scaffolds support higher chondrogenic differentiation of hBMMSCs compared to random ones. The aligned scaffolds show a higher expression level of chondrogenic markers such as type II collagen and aggrecan. It is concluded that the aligned nanofibrous scaffold with higher PLGA ratio could significantly enhance hBMMSC proliferation and differentiation to chondrocytes.     

Electrospun biodegradable nanofibers scaffolds for bone tissue engineering

Many polymeric materials have been developed and introduced for bone regeneration. Especially, their nanofibrous forms are mostly applied for artificial extracellular matrices. Polymeric materials in their nanofibrous form show some potent properties such as high surface‐to‐volume ratio, tunable porosity, and ease of surface functionalization. Benefiting from the properties of their main polymer and additives, they can provide new opportunities for cell seeding, proliferation, and new 3D‐tissue formation. This article focuses on most cited polymeric nanofibrous scaffolds fabricated by electrospinning and recent achievements. They were divided into two main categories: natural (collagen, silk, keratin, gelatin, chitosan, and alginate) and synthetic (e.g., polycaprolactone, polylactic acid, and polyglycolic acid) polymers. The role of several additives like hydroxyapatite, bone morphogenetic proteins (BMPs), tricalcium phosphate, and collagen type I in improving the adhesion, differentiation, and tissue formation of stem cells were discussed. Finally, the osteogenic capacity and ability of nanofibrous scaffolds to support the growth of clinically relevant bone tissue were briefly studied. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42883.     

Microscale Diffusion Measurements and Simulation of a Scaffold with a Permeable Strut

Electrospun nanofibrous structures provide good performance to scaffolds in tissue engineering. We measured the local diffusion coefficients of 3-kDa FITC-dextran in line patterns of electrospun nanofibrous structures fabricated by the direct-write electrospinning (DWES) technique using the fluorescence recovery after photobleaching (FRAP) method. No significant differences were detected between DWES line patterns fabricated with polymer supplied at flow rates of 0.1 and 0.5 mL/h. The oxygen diffusion coefficients of samples were estimated to be ~92%–94% of the oxygen diffusion coefficient in water based on the measured diffusion coefficient of 3-kDa FITC-dextran. We also simulated cell growth and distribution within spatially patterned scaffolds with struts consisting of either oxygen-permeable or non-permeable material. The permeable strut scaffolds exhibited enhanced cell growth. Saturated depths at which cells could grow to confluence were 15% deeper for the permeable strut scaffolds than for the non-permeable strut scaffold.