An integrated robust iterative learning control strategy for batch processes based on 2D system

This paper studies the problem of integrated control in the 2-dimensional (2D) system with parameter uncertainties for batch processes. An integrated iterative learning control (ILC) strategy based on quadratic performance for batch processes is proposed. It realizes comprehensive control by combining robust ILC in batch-axis with model predictive control (MPC) in time-axis. The design of quadratic-criterion-based ILC for the system can be converted into a min-max problem. Then a model predictive controller with time-varying prediction horizon is designed based on a quadratic cost function. For an uncertain model, a novel integrated robust ILC scheme based on a nominal model is further proposed. As a result, the control law of the 2D system can be regulated during one batch, which leads to good tracking performance and strong robustness against the disturbance and the uncertainties. Moreover, the analyses of the convergence and tracking performance are given. The proposed methods are applied to batch reactor, and results demonstrate that the system has good robustness and convergence. This paper provides a new way for batch processes control.     

IMC-based iterative learning control for batch processes with uncertain time delay

Based on the internal model control (IMC) structure, an iterative learning control (ILC) scheme is proposed for batch processes with model uncertainties including time delay mismatch. An important merit is that the IMC design for the initial run of the proposed control scheme is independent of the subsequent ILC for realization of perfect tracking. Sufficient conditions to guarantee the convergence of ILC are derived. To facilitate the controller design, a unified controller form is proposed for implementation of both IMC and ILC in the proposed control scheme. Robust tuning constraints of the unified controller are derived in terms of the process uncertainties described in a multiplicative form. To deal with process uncertainties, the unified controller can be monotonically tuned to meet the compromise between tracking performance and control system robust stability. Illustrative examples from the recent literature are performed to demonstrate the effectiveness and merits of the proposed control scheme.     

Latent variable model predictive control for trajectory tracking in batch processes: Alternative modeling approaches

Several Latent Variable Model (LVM) structures for modeling the time histories of batch processes are investigated from the view point of their suitability for use in Latent Variable Model Predictive Control (LV-MPC) [1] for trajectory tracking and disturbance rejection in batch processes. The LVMs are based on Principal Component Analysis (PCA). Two previously proposed approaches (Batch-Wise Unfolding (BWU) and Observation-Wise with Time-lag Unfolding (OWTU)) for modeling of batch processes [2] are incorporated in the LV-MPC and the benefits and drawbacks of each are explored. Furthermore, a new modeling approach (Regularized Batch-Wise Unfolding (RBWU)) is proposed to overcome the shortcomings of each of the previous modeling approaches while keeping the major benefits of both. The performances of the three latent variable modeling approaches in the course of LV-MPC for trajectory tracking and disturbance rejection are illustrated using two simulated batch reactor case studies. It is seen that the RBWU approach models the nonlinearity and time-varying properties of the batch almost as accurately as BWU approach, but needs fewer observations (batches) for model identification and results in a smoother PCA model. Recommendations are then given on which modeling approach to use under different scenarios.     

Tuning functions‐based robust adaptive tracking control of a class of nonlinear systems with time delays

In this paper, an adaptive backstepping tracking control scheme is proposed for a class of nonlinear state time‐varying delay systems, which are subject to parametric uncertainties and external disturbances. The bounds of the time delays and their derivatives are assumed to be unknown. Tuning functions method is exploited to construct the control law and adaptive laws. Unknown time‐varying delays are compensated by using appropriate Lyapunov–Krasovskii functional. It is shown that the proposed controller can guarantee the boundedness of all the closed‐loop signals. The tracking performance can be adjusted by choosing suitable design parameters. At the end, a simulation example is provided to illustrate the effectiveness of the design procedure. Copyright © 2011 John Wiley & Sons, Ltd.     

LESO-based Position Synchronization Control for Networked Multi-Axis Servo Systems With Time-Varying Delay

The position synchronization control (PSC) problem is studied for networked multi-axis servo systems (NMASSs) with time-varying delay that is smaller than one sampling period. To improve the control performance of the system, time-varying delays, modeling uncertainties, and external disturbances are first modeled as a lumped disturbance. Then, a linear extended state observer (LESO) is devised to estimate the system state and the lumped disturbance, and a linear feedback controller with disturbance compensation is designed to perform individual-axis tracking control. After that, a cross-coupled control approach is used to further improve synchronization performance. The bounded-input-bounded-output (BIBO) stability of the closed-loop control system is analyzed. Finally, both simulation and experiment are carried out to demonstrate the effectiveness of the proposed method.      

Sliding mode predictive tracking control for uncertain Steer-by-Wire system

The Steer-by-Wire (SbW) system is probably the most significant innovation among drive-by-Wire technologies in the automotive industry. Without the mechanical link, the most challenging issue is to control the wheels to closely follow the driver’s command. To improve the robustness of the model predictive control (MPC) in the presence of modeling uncertainties and disturbances in the steering control processes, a sliding mode predictive tracking control (SMPC) strategy for a SbW system with uncertain dynamics is proposed. The simulation and experimental results demonstrate that the performance of the proposed SMPC tracking controller is superior to both SMC and MPC methods for the steering angle tracking task.     

Adaptive neural network control of bilateral teleoperation with unsymmetrical stochastic delays and unmodeled dynamics

In this paper, adaptive NN control is proposed for bilateral teleoperation system with dynamic uncertainties, unknown external disturbances, and unsymmetrical stochastic delays in communication channel to achieve transparency and robust stability. Compared with previous passivity‐based teleoperation framework, the communication delays are unsymmetrical and stochastic. By partial feedback linearization using nominal dynamics, the nonlinear dynamics of the teleoperation system are transformed into two subsystems: local master/slave dynamics control and time‐delay motion tracking. By integrating Markov jump systems and adaptive parameters updating, adaptive NN control strategy is developed. The stability of the closed‐loop system and the boundedness of tracking errors are proved using Lyapunov–Krasovskii functional synthesis under specific linear matrix inequalities conditions. The proposed adaptive NN control is robust against motion disturbances, parametric uncertainties, and unsymmetrical stochastic delay, which effectiveness is validated by extensive simulation studies. Copyright © 2013 John Wiley & Sons, Ltd.     

Adaptive robust output tracking of uncertain strict-feedback nonlinear time-delay systems via control schemes with simple structure

The output tracking control problem is considered for a class of uncertain strict-feedback nonlinear systems with time-varying delays. In the paper, the time-varying delays are assumed to be any non-negative continuous and bounded functions, and it is not necessary for their derivatives to be less than one. It is also assumed that the upper bounds of nonlinear delayed state perturbations and external disturbances are unknown. On the basis of backstepping algorithm, a novel design method is proposed by which some simple adaptive robust output tracking control schemes are synthesised. The proposed design method can avoid the repeated differentiation problem which appears in using the conventional backstepping algorithm, and need not know all the nonlinear upper bound functions of uncertainties, which are repeatedly employed at each step of the backstepping algorithm. In particular, it is not necessary to know any information on the time-varying delays to construct our simple output tracking control schemes. It is also shown that the tracking error can converge uniformly exponentially towards a neighbourhood of the origin. Finally, a numerical example and its simulations are provided to demonstrate the design procedure of the simple method proposed in the paper.     

Characteristic Model-based Discrete-time Sliding Mode Control for Spacecraft with Variable Tilt of Flexible Structures

In this paper, the finite-time attitude tracking control problem for the spacecrafts with variable tilt of flexible appendages in the conditions of exogenous disturbances and inertia uncertainties is addressed. First the characteristic modeling method is applied to the problem of the spacecraft modeling. Second, a novel adaptive sliding mode surface is designed based on the characteristic model. Furthermore, a discrete-time sliding mode control (DTSMC) law, which makes the tracking error converge into a predefined bound in finite time, is proposed by employing the parameters of characteristic model associated with the sliding mode surface to provide better performances, robustness, faster response, and higher control precision. The designed DTSMC includes the adaptive control architecture and is chattering-free. Finally, digital simulations of a sun synchronous orbit satellite (SSOS) are presented to illustrate effectiveness of the control strategies as well as to verify the practical feasibility of the rapid maneuver mission.      

Virtual-Point-Based asymptotic tracking control of 4WS vehicles

This paper studies the lateral and longitudinal path tracking control of four-wheel steering vehicles. By the introduction of virtual points, a robust and adaptive path tracking control strategy is proposed to simultaneously counteract modeling uncertainties, unexpected disturbances, and coupling effects. An adaptive model-based feedforward adaptive term and the robust integral of the sign of the error (RISE) feedback term can be used to yield an asymptotic tracking result, which improve the tracking performance and reduce the control effort. The stability of closed-loop system is analyzed using a Lyapunov-based method. Simulation results are provided to demonstrate the performance of the proposed controller under different driving conditions.     

Integrated adaptive robust control for multilateral teleoperation systems under arbitrary time delays

With the increasing industrial requirements such as bigger size object, stable operation, and complex task, multilateral teleoperation systems extended from traditional bilateral teleoperation are widely developed. In this paper, the integrated control design is developed for multilateral teleoperation systems, where n master manipulators are operated by human to remotely control n slave manipulators cooperatively handling a target object. For the first time, the control objectives of multilateral teleoperation including stability, synchronization, transparency, and internal force distribution are clarified systematically. A novel communication architecture is proposed to cope with communication delays, where the estimated environmental parameters are transmitted from the slave side to the master, to replace the traditional environmental force measurement in the communication channel. A kind of nonlinear adaptive robust control technique is used to deal with nonlinearities, unknown parameters, and modeling uncertainties existing in the master, slave, and environmental dynamics, so that the excellent tracking performance is achieved in both master and slave sides. The coordinated motion/force control is designed in the slave side by the optimal internal force distribution among n slave manipulators, and the impedance control is designed in the master side to realize the target transparency behavior. In summary, the proposed control algorithm can achieve the guaranteed robust stability, the excellent synchronization and transparency performance, and the optimal internal force distribution simultaneously for multilateral teleoperation systems under arbitrary time delays and various modeling uncertainties. The simulation is carried out on a 2‐master/2‐slave teleoperation system, and the results show the effectiveness of the proposed control design. Copyright © 2015 John Wiley & Sons, Ltd.     

基于模糊模型和神经网络的多时滞不确定非线性系统的鲁棒H∞控制

针对一类具有多时滞的不确定非线性系统,提出了一种基于模糊模型和神经网络的组 合控制方法.利用具有多时滞的模糊T-S模型对系统进行近似建模并给出基于线性矩阵不等式 (LMI)的模糊H∞控制律.提出完全自适应RBF神经网络控制方法,通过在线自适应调整RBF 神经网络的权重、函数中心和宽度,来对消系统的未知不确定性和模糊建模误差的影响,不要求 系统的不确定项和模糊建模误差满足任何匹配条件或约束,并证明了闭环系统的稳定性.最后, 将所提出的方法应用到一具有多时滞的非线性混沌系统,仿真结果表明了该方法的有效性.     

A Neural Net Predictive Control for Telerobots with Time Delay

This paper extends the Smith Predictor feedback control structure to unknown robotic systems in a rigorous fashion. A new recurrent neural net predictive control (RNNPC) strategy is proposed to deal with input and feedback time delays in telerobotic systems. The proposed control structure consists of a local linearized subsystem and a remote predictive controller. In the local linearized subsystem, a recurrent neural network (RNN) with on-line weight tuning algorithm is employed to approximate the dynamics of the time-delay-free nonlinear plant. The remote controller is a modified Smith predictor for the local linearized subsystem which provides prediction and maintains the desirable tracking performance. Stability analysis is given in the sense of Lyapunov. The result is an adaptive compensation scheme for unknown telerobotic systems with time delays, uncertainties, and external disturbances. A simulation of a two-link robotic manipulator is provided to illustrate the effectiveness of the proposed control strategy.     

Robust adaptive control of nonlinear systems with unknown time delays

In this paper, robust adaptive control is presented for a class of parametric-strict-feedback nonlinear systems with unknown time delays. Using appropriate Lyapunov-Krasovskii functionals, the uncertainties of unknown time delays are compensated for. Controller singularity problems are solved by employing practical robust control and regrouping unknown parameters. By using differentiable approximation, backstepping design can be carried out for a class of nonlinear systems in strict-feedback form. It is proved that the proposed systematic backstepping design method is able to guarantee global uniform ultimate boundedness of all the signals in the closed-loop system and the tracking error is proven to converge to a small neighborhood of the origin. Simulation results are provided to show the effectiveness of the proposed approach.     

A GESO based MPC approach to contour error control of networked motion control system

This paper presents a generalised extended state observer (GESO) based model predictive control (MPC) approach to contour error control for networked multi-axis motion system (NMAMS) with network-induced delays. First, the uncertainties induced by the network-induced delays are modelled as an additive bounded disturbance, and a novel model predictive controller based on the GESO is designed for the uniaxial trajectory tracking control system. The GESO is used to estimate the system state and the disturbance simultaneously, and the effects of the uncertainties induced by the delays are eliminated by the proposed GESO based controller. Then the contour error estimation method is adopted, and a PID controller is designed to compensate the contour error. Finally, experiments are carried out to demonstrate the effectiveness of the proposed method.     

Tracking control for sampled‐data systems with uncertain time‐varying sampling intervals and delays

In this paper, a solution to the approximate tracking problem of sampled‐data systems with uncertain, time‐varying sampling intervals and delays is presented. Such time‐varying sampling intervals and delays can typically occur in the field of networked control systems. The uncertain, time‐varying sampling and network delays cause inexact feedforward, which induces a perturbation on the tracking error dynamics, for which a model is presented in this paper. Sufficient conditions for the input‐to‐state stability (ISS) of the tracking error dynamics with respect to this perturbation are given. Hereto, two analysis approaches are developed: a discrete‐time approach and an approach in terms of delay impulsive differential equations. These ISS results provide bounds on the steady‐state tracking error as a function of the plant properties, the control design and the network properties. Moreover, it is shown that feedforward preview can significantly improve the tracking performance and an online extremum seeking (nonlinear programming) algorithm is proposed to online estimate the optimal preview time. The results are illustrated on a mechanical motion control example showing the effectiveness of the proposed strategy and providing insight into the differences and commonalities between the two analysis approaches. Copyright © 2009 John Wiley & Sons, Ltd.     

Robust adaptive neural tracking control for a class of electrically driven robots with time delays

This article addresses the problem of designing the robust tracking control for a class of uncertain electrically driven robots with time delays. The unknown time-delay uncertainty is assumed to be bounded by a function of all the state variables. By suitably choosing the Lyapunov–Krasovskii functionals, a novel adaptive/robust neural tracking control scheme is developed for the first time such that all the states and signals of the closed-loop time-delay robot system are bounded and the tracking error is shown to be uniformly ultimately bounded. By suitably designing the embedded current signal, the effect of time-delay uncertainty in the mechanical dynamics does not require to be incorporated into the current tracking error dynamics, and so the Lyapunov–Krasovskii functionals can be easily constructed in the stability analysis. Compared with the previous investigations of controlling robots the control scheme developed here can be extended to handle a broader class of electrically driven robots perturbed simultaneously by plant uncertainties, time-varying perturbations, and time-delay uncertainties. Finally, simulation examples are made to demonstrate the effectiveness of the proposed control algorithm.     

Adaptive neural network control of nonlinear systems with unknown time delays

In this note, adaptive neural control is presented for a class of strict-feedback nonlinear systems with unknown time delays. Using appropriate Lyapunov-Krasovskii functionals, the uncertainties of unknown time delays are compensated for such that iterative backstepping design can be carried out. In addition, controller singularity problems are solved by using the integral Lyapunov function and employing practical robust neural network control. The feasibility of neural network approximation of unknown system functions is guaranteed over practical compact sets. It is proved that the proposed systematic backstepping design method is able to guarantee semiglobally uniformly ultimate boundedness of all the signals in the closed-loop system and the tracking error is proven to converge to a small neighborhood of the origin.