Single-step polyol synthesis of alloy Pt<Subscript>7</Subscript>Sn<Subscript>3</Subscript> versus bi-phase Pt/SnO<Subscript>x</Subscript> nano-catalysts of controlled size for ethanol electro-oxidation

Disordered alloy and bi-phase PtSn nanoparticles of nominal Pt:Sn ratio of 70:30 atomic % with controlled size and narrow size distribution were synthesized using a single-step polyol method. By adjusting the solution pH it was possible to obtain Pt₇Sn₃ nanoparticles of various sizes from 2.8 to 6.5 nm. We found that the presence of NaOH in the synthesis solution not only influenced the nanoparticle size, but as it was revealed by XRD, it apparently also dictated the degree of Pt and Sn alloying. Three catalysts prepared at lower NaOH concentrations (C_NaOH < 0.15 M) showed disordered alloy structure of the nominal composition, while the other three catalysts synthesized at higher NaOH concentrations (C_NaOH > 0.15 M) consisted of bi-phase nanoparticles comprising a crystalline phase close to that of pure Pt together with an amorphous Sn phase. These observations are plausibly due to the phase separation and formation of monometallic Pt and amorphous SnO_x phases. A proposed reaction mechanism of Pt₇Sn₃ nanoparticle formation is presented to explain these observations along with the catalytic activities measured for the six synthesized carbon-supported Pt₇Sn₃ catalysts. The highest catalytic activity towards ethanol electro-oxidation was found for the carbon-supported bi-phase catalyst that formed the largest Pt (6.5 nm) nanoparticles and SnO_x phase. The second best catalyst was a disordered alloy Pt₇Sn₃ catalyst with the second largest nanoparticle size (5 nm), while catalysts of smaller size (4.5–4.6 nm) but different structure (disordered alloy vs. bi-phase) showed similar catalytic performance inferior to that of the 5 nm disordered alloy Pt₇Sn₃ catalyst. This work demonstrated the importance of producing bi-metallic PtSn catalysts with large Pt surfaces in order to efficiently electro-oxidize ethanol.     

Electrochemical properties of microwave-assisted reflux-synthesized Mn<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles in different electrolytes for supercapacitor applications

The nanosized Mn₃O₄ particles were prepared by microwave-assisted reflux synthesis method. The prepared sample was characterized using various techniques such as X-ray diffraction (XRD), Fourier transform-infrared spectroscopy (FT-IR), Raman analysis, and transmission electron microscopy (TEM). Electrochemical properties of Mn₃O₄ nanoparticles were investigated using cyclic voltammogram (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic charge–discharge analysis in different electrolytes such as 1 M KCl, 1 M Na₂SO₄, 1 M NaNO₃, and 6 M KOH electrolytes. XRD pattern reveals the formation of single-phase Mn₃O₄ nanoparticles. The FT-IR and Raman analysis also assert the formation of Mn₃O₄ nanoparticles. The TEM image shows the spherical shape particles with less than 50 nm sizes. Among all the electrolytes, the Mn₃O₄ nanoparticles possess maximum specific capacitance of 94 F g⁻¹ in 6 M KOH electrolyte calculated from CV. The order of capacitance obtained by various electrolytes is 6 M KOH > 1 M KCl > 1 M NaNO₃ > 1 M Na₂SO₄. The EIS and galvanostatic charge–discharge results further substantiate with the CV results. The cycling stability of Mn₃O₄ electrode reveals that the prepared Mn₃O₄ nanoparticles are a suitable electrode material for supercapacitor application.     

Facile synthesis and high rate capability of Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript>/C composite materials with controllable carbon content

A modified ball-milling-assisted green solid reaction method is provided to prepare Li₄Ti₅O₁₂/C composite materials with controllable carbon content. Thermal analysis was utilized to investigate the reaction process and the temperature for eliminating carbon. The added carbon and the time for eliminating the carbon can affect the particle size and greatly improve the cycling stability and rate performance. Besides, the particle size can reach ~60 nm, the Li₄Ti₅O₁₂ eliminated carbon at 600 °C has ~178% higher discharge capacity than that without added carbon after 500 cycles under the same conditions. As for the Li₄Ti₅O₁₂ with a carbon weight of 10.6%, the second discharge capacity can reach 177.2 and 120.8 mAh g⁻¹ at 1 and 20 C rates, respectively. Its discharge capacity still remains at 118.3 mAh g⁻¹ after 500 cycles under various current rates. The results are comparable to those of the reported Li₄Ti₅O₁₂/PAS composite.     

Synthesis and Magnetic Properties of Nearly Monodisperse CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript>Nanoparticles Through a Simple Hydrothermal Condition

Nearly monodisperse cobalt ferrite (CoFe₂O₄) nanoparticles without any size-selection process have been prepared through an alluring method in an oleylamine/ethanol/water system. Well-defined nanospheres with an average size of 5.5 nm have been synthesized using metal chloride as the law materials and oleic amine as the capping agent, through a general liquid–solid-solution (LSS) process. Magnetic measurement indicates that the particles exhibit a very high coercivity at 10 K and perform superparamagnetism at room temperature which is further illuminated by ZFC/FC curves. These superparamagnetic cobalt ferrite nanomaterials are considered to have potential application in the fields of biomedicine. The synthesis method is possible to be a general approach for the preparation of other pure binary and ternary compounds.     

Preparation and electrochemical properties of spherical LiFePO<Subscript>4</Subscript> and LiFe<Subscript>0.9</Subscript>Mg<Subscript>0.1</Subscript>PO<Subscript>4</Subscript> cathode materials for lithium rechargeable batteries

The spherical LiFePO₄/C and LiFe_0.9Mg_0.1PO₄/C powders were successfully prepared from spherical FePO₄ via a simple uniform-phase precipitation method at normal pressure, using FeCl₃ and H₃PO₄ as the reactants. The FePO₄, LiFePO₄/C, and LiFe_0.9Mg_0.1PO₄/C powders were characterized by scanning electron microscopies (SEM), powder X-ray diffraction (XRD), X-ray photoelectron spectrometer (XPS), and tap-density testing. The uniform spherical particles produced are amorphous, but they were crystallized to FePO₄ after calcining above 400 °C. Due to the homogeneity of the basic FePO₄, the final products, LiFePO₄/C and LiFe_0.9Mg_0.1PO₄/C, are also significantly uniform and the particle size is of about 1 μm in diameter. The tap-density of the spherical LiFePO₄/C and LiFe_0.9Mg_0.1PO₄/C are 1.75 and 1.77 g cm⁻³, respectively, which are remarkably higher than the non-spherical LiFePO₄ powders (the tap-density is 1.0–1.3 g cm⁻³). The excellent specific capacities of 148 and 157 mAh g⁻¹ with a rate of 0.1 C are achieved for the LiFePO₄/C and LiFe_0.9Mg_0.1PO₄/C, respectively. Comparison of the cyclic voltammograms of LiFePO₄/C and LiFe_0.9Mg_0.1PO₄/C shows enhanced redox current and reversibility for the sample substituting Mg on the Fe site. LiFe_0.9Mg_0.1PO₄/C exhibits better high-rate and cycle performances than the un-substituted LiFePO₄/C.     

A study of the lithium intercalation into nanoparticles of LiCoO<Subscript>2</Subscript> from an aqueous solution

Nanoparticles of lithium cobalt oxide (LiCoO₂) were synthesized by means of a citrate sol–gel combustion route. The particles were characterized by scanning and transmission electron microscopies (SEM and TEM), energy-dispersive X-ray spectroscopy, and X-ray diffraction (XRD) measurements. Near spherical nanoparticles of around 100 nm were observed in SEM and TEM micrographs. XRD data indicated that the as-prepared nanoparticles presented pure phase of LiCoO₂ with R-3m symmetry. The kinetics of electrochemical intercalation of lithium into the nanoparticles were investigated by means of cyclic voltammetry (CV), chronoamperometry, and electrochemical impedance spectroscopy (EIS) with special emphasis on the application potential as cathode material for aqueous rechargeable lithium batteries. CV studies of the nanoparticles at slow scan rate of 0.1 mV s⁻¹ between 600 and 820 mV versus Ag/AgCl, demonstrated that the nanoparticles represented well-defined reversible peaks. The non-linear chemical diffusion of lithium into the nanoparticles was explored by EIS. In this regards, the results were discussed based on an equivalent circuit, distinguishing the kinetic properties of lithium intercalation. The kinetic parameters of lithium intercalation were obtained using the equivalent circuit, which were in good agreement with the experimental results. The changes of kinetic parameters of lithium intercalation with potential were also discussed in detail.     

Determination of cadmium (II) using H<Subscript>2</Subscript>O<Subscript>2</Subscript>-oxidized activated carbon modified electrode

Pristine activated carbon (AcC) was oxidized by H₂O₂ under ultrasonic conditions. Compared with pristine AcC, the H₂O₂-oxidized AC possesses higher accumulation ability to trace levels of Cd²⁺. Based on this, a highly sensitive, simple and rapid electrochemical method was developed for the determination of Cd²⁺. In 0.01 mol L⁻¹ HClO₄ solution, Cd²⁺ was effectively accumulated at the surface of H₂O₂-oxidized AcC modified paste electrode, and then reduced to Cd under −1.10 V. During the following potential sweep from −1.10 to −0.50 V, reduced Cd was oxidized and a sensitive stripping peak appears at −0.77 V. The stripping peak current of Cd²⁺ changes linearly with concentration over the range 5.0 × 10⁻⁸ to 5.0 × 10⁻⁶ mol L⁻¹. The limit of detection was found to be 3.0 × 10⁻⁸ mol L⁻¹ for 2-min accumulation. Finally, this new sensing method was successfully used to detect Cd²⁺ in waste water samples.     

Soft Template Synthesis of Super Paramagnetic Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> Nanoparticles a Novel Technique

The present study reports a facile technique for the synthesis of crystalline super paramagnetic nano ferrite (Fe₃O₄) particles using diethyl amine as a soft template. The spectral properties of Fe₃O₄ nanoparticles were characterized by UV–visible and Fourier Transform Infrared (FTIR) spectroscopies while the crystalline structure and particle size was estimated using X-Ray diffraction (XRD) as well as transmission electron microscopy (TEM) techniques. The super paramagnetic behavior of Fe₃O₄ nanoparticles was determined using vibrating sample magnetometer (VSM) at 300 K. The results of the studies revealed that this technique could be adopted to synthesize agglomerate free super paramagnetic Fe₃O₄ nanoparticles which may find potential application in the filed of biosensor and corrosion protective coatings.     

Synthesis and study of photoacoustic properties of (Pd/TiO<Subscript>2</Subscript>)/polystyrene nanocomposites

In this work, nanocomposites (Ncs) from Pd nanoparticles and TiO₂ (Pd-Nps-TiO₂) were supported on a polystyrene matrix (PS). Chemical liquid deposition, solvated metal atom dispersion and in situ polymerization were used in order to synthesize these Ncs. Colloid and nanocomposite characterization were performed by TEM, SEM, EDX, SAED and TGA. TEM analysis revealed a particle size of 7 nm for Coll-Styrene and 11 nm for Pd-Nps supported on TiO₂ after radical polymerization. SAED showed phases corresponding to both metallic Pd and TiO₂ anatase in the polymeric matrix. Molecular weight (MW) was determined by viscosimetric method. MW varies according to the initiator concentration and nanoparticle amount used for polymerization. The amount of nanoparticles increased the decomposition temperature of the Ncs by 10 °C, improving the thermal stability of these hybrid materials. Photoacoustic properties were evaluated in order to determine the effect of nanoparticles on thermal diffusivity (α) inside the matrix. Significant values of (α) were found for Ncs with Pd-Nps in contrast to PS and Pd/TiO₂ Ncs. Structural aspects and colloidal aggregation of Ncs were also studied.     

The enhancement effect of phosphomolybdic acid (H<Subscript>3</Subscript>PMo<Subscript>12</Subscript>O<Subscript>40</Subscript>) on Pd/C catalyst for the electroreduction of hydrogen peroxide

A Pd/C electrode modified by H₃PMo₁₂O₄₀ was prepared and its catalytic performance for H₂O₂ electroreduction in acidic medium was investigated by cyclic voltammograms. Pd nanoparticles supported on Vulcan XC-72 carbon were prepared by chemical reduction of PdCl₂ in aqueous solution using NaBH₄ as the reducing agent. X-ray diffraction analysis indicated that the particle size of Pd is around 9.7 nm. The modified electrode was prepared by cyclic voltammograms in H₂SO₄ solution containing H₃PMo₁₂O₄₀. The results showed that H₃PMo₁₂O₄₀ can efficiently enhance the electrocatalytic activity for H₂O₂ electroreduction on Pd/C. The effect of H₃PMo₁₂O₄₀ content on the electrocatalytic activity of the catalyst was also investigated by CV. The best results appeared at the concentration of H₃PMo₁₂O₄₀ = 0.5 mmol L⁻¹.     

Synthesis of TiO<Subscript>2</Subscript> Nanoparticles by Microemulsion/Heat Treated Method and Photodegradation of Methylene Blue

In this work, TiO₂ nanoparticles were prepared by microemulsion (ME)/heat treated method and its photodecomposition property of methylene blue. Microemulsion (ME) consisted of water, cyclohexane and an anionic surfactant such as bis (2-ethylhexyl) sodium sulfosuccinate (AOT). Titanium tetraisopropoxide (TTIP) was dropped into the ME solution and then then TiO₂ nanoparticles were formed by the hydrolysis reaction between TTIP in the organic solvent and the water in the core of ME. The smallest diameter of the particles was 20 nm in the system of cyclohexane with surfactant when the molar ratio of water to surfactant was 2. The effect of the process parameters (water/surfactant ratio, different temperatures) on the final characteristics has been investigated, in terms of structural phase and particle size. The TiO₂ nanoparticles were characterized by means of X-ray diffraction, Transmission and scanning electron microscopy, Fourier-Transformed infrared and differential thermal analysis. TiO₂ nanoparticles prepared in this condition were collected as amorphous powder, and converted to anatase phase at less than 350 °C, which is lower than the ordinal phase transition temperature. The crystallite size and crystallinity increase with an increase of heat treated s temperature. The particles are shown to have a spherical shape and have a uniform size distribution. The size of nanoparticles raises with an increase of water/surfactant ratio. In the photocatalytic decomposition of methylene blue, the photocatalytic activity is mainly determined by the crystallinity of TiO₂. In addition, the TiO₂ heat treated at 350 °C shows the highest activity on the photocatalytic decomposition of methylene blue (k = 1.7 × 10⁻² min⁻¹).     

Nanocasting Synthesis of Ultrafine WO<Subscript>3</Subscript> Nanoparticles for Gas Sensing Applications

Ultrafine WO₃ nanoparticles were synthesized by nanocasting route, using mesoporous SiO₂ as a template. BET measurements showed a specific surface area of 700 m²/gr for synthesized SiO_2, while after impregnation and template removal, this area was reduced to 43 m²/gr for WO3 nanoparticles. HRTEM results showed single crystalline nanoparticles with average particle size of about 5 nm possessing a monoclinic structure, which is the favorite crystal structure for gas sensing applications. Gas sensor was fabricated by deposition of WO₃ nanoparticles between electrodes via low frequency AC electrophoretic deposition. Gas sensing measurements showed that this material has a high sensitivity to very low concentrations of NO₂ at 250°C and 300°C.     

Preparation and properties of Co<Subscript>3</Subscript>O<Subscript>4</Subscript> nanorods as supercapacitor material

Co₃O₄ nanorods have been successfully synthesized by thermal decomposition of the precursor prepared via a facile and efficient microwave-assisted hydrothermal method, using cetyltrimethylammonium bromide (CTAB) with ordered chain structures as soft template for the first time. The obtained Co₃O₄ was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and electrochemical measurements. The results demonstrate that the as-synthesized nanorods are single crystalline with an average diameter of about 20 to 50 nm and length up to several micrometers. Preliminary electrochemical studies, including cyclic voltammetry (CV), galvanostatic charge–discharge, and electrochemical impedance spectroscopy (EIS) measurements, are carried out in 6 M KOH electrolyte. Specific capacitance of 456 F g⁻¹ for a single electrode could be achieved even after 500 cycles, suggesting its potential application in electrochemical capacitors. This promising method could provide a universal green chemistry approach to synthesize other low-cost and environmentally friendly transition metal hydroxide or oxide.     

Effective Utilization of the Catalytically Active Phase: NH<Subscript>3</Subscript> Oxidation Over Unsupported and Supported Co<Subscript>3</Subscript>O<Subscript>4</Subscript>

Abstract  

The performance of pellets of unsupported and silica-supported Co₃O₄ in the ammonia oxidation was investigated as a function of the particle size to investigate the utilization of the catalytically active phase in these materials. The obtained activity in terms of ammonia conversion over the silica-supported Co₃O₄ is higher compared to the conversion over the unsupported Co₃O₄, despite a lower cobalt oxide loading and more severe diffusional limitations. The effectiveness factor for the silica-supported catalyst is slightly lower than the effectiveness factor for the unsupported catalyst in the form of pellets of similar size. However, the effective utilization of cobalt within the catalyst is higher for the silica-supported catalyst, mainly due to the higher dispersion of the catalytically active phase.     

Voltammetric behavior and the determination of quercetin at a flowerlike Co<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles modified glassy carbon electrode

Flowerlike Co₃O₄ nanoparticles were used as a modifier on the glassy carbon electrode to fabricate a quercetin (Qu) sensor. The morphology and crystallinity of the prepared Co₃O₄ material were investigated by scanning electron microscopy and X-ray diffraction. Electrochemical behavior of Qu at the sensor was studied by cyclic voltammetry and semi-derivative voltammetry. Results suggested that the modified electrode exhibited a strong electrocatalytic activity toward the redox of Qu. The electron transfer coefficient (α), the number of electron transfer (n), and the diffusion coefficient (D) of Qu at the sensor were calculated. Under the optimum conditions, the catalytic peak currents of Qu were linearly dependent on the concentrations of Qu in the range from 5.0 × 10⁻⁷ to 3.3 × 10⁻⁴ M, with a detection limit of 1.0 × 10⁻⁷ M. This proposed method was successfully applied to determine the quercetin concentration in Ginkgo leaf tablet and human urine samples.     

Low-Temperature Preparation of Superparamagnetic CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> Microspheres with High Saturation Magnetization

Based on a low-temperature route, monodispersed CoFe₂O₄ microspheres (MSs) were fabricated through aggregation of primary nanoparticles. The microstructural and magnetic characteristics of the as-prepared MSs were characterized by X-ray diffraction/photoelectron spectroscopy, scanning/transmitting electron microscopy, and vibrating sample magnetometer. The results indicate that the diameters of CoFe₂O₄ MSs with narrow size distribution can be tuned from over 200 to ~330 nm. Magnetic measurements reveal these MSs exhibit superparamagnetic behavior at room temperature with high saturation magnetization. Furthermore, the mechanism of formation of the monodispersed CoFe₂O₄ MSs was discussed on the basis of time-dependent experiments, in which hydrophilic PVP plays a crucial role.     

Effects of surface area on electrochemical performance of Li[Ni<Subscript>0.2</Subscript>Li<Subscript>0.2</Subscript>Mn<Subscript>0.6</Subscript>]O<Subscript>2</Subscript> cathode material

The effect of surface area on the electrochemical properties and thermal stability of Li[Ni_0.2Li_0.2Mn_0.6]O₂ powders was characterized using a charge/discharge cycler and DSC (Differential Scanning Calorimeter). The surface area of the samples was successfully controlled from ~4.0 to ~11.7 m² g⁻¹ by changing the molar ratio of the nitrate/acetate sources and adding an organic solvent such as acetic acid or glucose. The discharge capacity and rate capability was almost linearly increased with increase in surface area of the sample powder. A sample with a large surface area of 9.6–11.7 m² g⁻¹ delivered a high discharge capacity of ~250 mAh g⁻¹ at a 0.2 C rate and maintained 62–63% of its capacity at a 6 C rate versus a 0.2 C rate. According to the DSC analysis, heat generation by thermal reaction between the charged electrode and electrolyte was not critically dependent on the surface area. Instead, it was closely related to the type of organic solvent employed in the fabrication process of the powder.     

Thermoelectric Properties of <Emphasis Type="Italic">x</Emphasis>PbTe/Yb<Subscript>0.2</Subscript>Co<Subscript>4</Subscript>Sb<Subscript>12</Subscript> Hot-Pressed Samples

The xPbTe/Yb_0.2Co₄Sb₁₂ compounds were prepared by the ball-milling and hot-pressed process. Electrical conductivity of the composite samples are reduced with a increase in PbTe content; and, their temperature dependence coefficients show the positive values. The maximum electrical conductivity of composite materials is ~80000 Sm⁻¹ at 800 K. The Seebeck coefficient (absolute value) of the composite material is obviously improved with an increase in the dispersed phase (PbTe) content; the Seebeck coefficient (absolute value) of the 10PbTe sample is ~260 μVK⁻¹ at 700 K, which increases by 13.6% relative to that of the Yb_0.2Co₄Sb₁₂ sample. The thermal conductivity of the composite samples is improved due to introduction of PbTe, and the thermal conductivity of the 10PbTe sample is ~3 Wm⁻¹ K⁻¹ at 550 K. The maximum value of ZT is 0.78 at 700 K for the 2.5PbTe sample.     

Morphology Tailored Synthesis of C-WO<Subscript>3</Subscript> nanostructures and its Photocatalytic Application

Photocatalytic degradation is an ambitious and cost effective technique used for decontamination and sanitization of the waste polluted water of environment. Hydrothermal method is used to synthesis the carbon coupled WO₃ nanoparticles with different concentrations of carbon (0.0, 0.2, 0.5, 1.0 and 2.0%) from precursor Na₂WO₄·2H₂O with glucose and nitric acid. Synthesized nanoparticles were characterized by SEM, EDX, XRD, UV–Vis, and PL to study morphology, and particle size, composition, structural and optical properties, respectively. SEM revealed that morphology of the carbon coupled WO₃ nanoparticles becomes spherical by increasing amount of coupled carbon atoms. The average grain size of the carbon doped nanoparticles is found to be 15–20 nm. Furthermore, size of nanoparticles affect the band gap of synthesized nanoparticles as well. It has also been observed that carbon coupled WO₃ nanoparticles effectively take part in photo degradation due to reduction of electron–hole recombination rate.     

Chemical Vapor Deposition of Pd(C<Subscript>3</Subscript>H<Subscript>5</Subscript>)(C<Subscript>5</Subscript>H<Subscript>5</Subscript>) to Synthesize Pd@MOF-5 Catalysts for Suzuki Coupling Reaction

Abstract  

The highly porous metal organic framework MOF-5 was loaded with the metal–organic compound [Pd(C₃H₅)(C₅H₅)] by metal–organic chemical vapor deposition (MOCVD) method. The inclusion compound [Pd(C₃H₅)(C₅H₅)]@MOF-5 was characterized by powder X-ray diffraction (PXRD), Fourier-transform infrared (FT-IR) spectroscopy, and solid-state nuclear magnetic resonance spectroscopy. It was found that the host lattice of MOF-5 remained intact upon precursor insertion. The –C₃H₅ ligand in the precursor is easier to lose due to the interaction between palladium and the benzenedicarboxylate linker in MOF-5, providing a possible explanation for the irreversibility of the precursor adsorption. Pd nanoparticles of about 2–5 nm in size was formed inside the cavities of MOF-5 by hydrogenolysis of the inclusion compound [Pd(C₃H₅)(C₅H₅)]@MOF-5 at room temperature. N₂ sorption of the obtained material confirmed that high surface area was retained. In the Suzuki coupling reaction the Pd@MOF-5 materials showed a good activity in the first catalytic run. However, the crystal structure of MOF-5 was completely destroyed during the following reaction runs, as confirmed by PXRD, which caused a big loss of the activity.