Effect of Cu promoter and alumina phases on Pt/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> for propane dehydrogenation

We investigated the effects of different Cu weight ratio on θ or γ-Al₂O₃ which were impregnated with platinum in terms of catalytic activity for propane dehydrogenation and physicochemical properties. 1.5 wt% Pt, 0-10 wt% Cu catalyst supported on θ-Al₂O₃ or γ-Al₂O₃ was prepared by incipient wetness co-impregnation. Enhanced Pt dispersion by increasing Cu contents in γ-Al₂O₃ supported catalyst was confirmed via XRD and XPS. Pt and CuO was separated in Pt-Cu/θ-Al₂O₃, but Pt-Cu alloy was identified after reduction treatment. Also, adding Cu in Pt/Al₂O₃ makes catalyst’s acidity lower and this property led to increased propylene yield in propane dehydrogenation. However, Pt₃Cu was not good for yield of PDH, which was confirmed in Pt-10Cu/θ-Al₂O₃ through XRD.     

Density and microhardness of glasses in the SrO-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> system

The density d at a temperature of 25°C is measured by the hydrostatic weighing method, the Vickers microhardness H _V is determined, and the fluctuation free volume fraction f _g is calculated for glasses in the SrO-B₂O₃-SiO₂ system with a constant strontium oxide content in the range from 35 to 45 mol %. It is demonstrated that the quantities H _V and f _g decrease and the density d increases with an increase in the SrO content.     

Crystal structure of Pb<Subscript>6</Subscript>O[(Si<Subscript>6</Subscript>Al<Subscript>2</Subscript>)O<Subscript>20</Subscript>]

The crystal structure of Pb₆O[(Si₆Al₂)O₂₀)] is investigated using X-ray diffraction. The compound has tetragonal symmetry, space group I4/mmm, a = 11.7162(10) Å, c = 8.0435(12) Å, and V = 1104.13(2) ų. The structure is refined to R ₁ = 0.036 for 562 unique reflections with [F ₀] ≥ 4σF. The structure contains two symmetrically independent positions of the Pb²⁺ cations coordinated by five O atoms (Pb²⁺-O^2? = 2.34–2.68 Å). The TO₄ tetrahedra (T = Si, Al) form tubular [(Si₆Al₂)O₂₀] chains extended along the c axis. The O₄ oxygen atom is not bonded to the Si and Al atoms and is octahedrally coordinated by six Pb atoms with the formation of an oxo-centered OPb₆ octahedron. The assumption is made that, in some of lead silicate and aluminosilicate glasses, a number of oxygen atoms are located outside the tetrahedral structure and represent segregation centers of the Pb²⁺ cations due to the formation of oxo-centered complexes.     

Crystal structure of new compound (Rb,K)<Subscript>2</Subscript>Cu<Subscript>3</Subscript>(P<Subscript>2</Subscript>O<Subscript>7</Subscript>)<Subscript>2</Subscript>

A new compound of (Rb,K)₂Cu₃(P₂O₇)₂ is obtained by high-temperature reactions from a mixture of RbNO₃, KNO₃, Cu(NO₃)₂, and (NH₄)₄P₂O₇. The crystal structure was solved by direct methods and refined to R ₁ = 0.056 for 5022 independent reflections. The compound belongs to a rhombic crystal system, P2₁2₁2₁, Z = 8, a = 9.9410(7) Å, b = 13.4754(6) Å, c = 18.6353 (3) Å, and R = 0.056. The basis of the structure is a complex copper-phosphate skeleton of the composition of [Cu₃(P₂O₇)₂]^2–, which can be regarded as consisting of two types of heteropolyhedral layers parallel to the (001) plane. The layers are alternated with each other, forming a frame, in the cavities of which the positions of alkali cations are located, statistically populated with K⁺ and Rb⁺ ions. Based on the refined populations of the positions of alkali cations, an exact chemical formula of the compound can be written as Rb_1.28K_0.72Cu₃(P₂O₇)₂. The compound is the most complex among those known to this day of the composition of A₂ ^IB₃ ^II(P₂O₇)₂ (A = Li, Na, K, Rb, or Cs; B = Ni, Cu, or Zn).     

Synthesis of Titanates with a Ramsdellite-Type Tunnel Structure Crystallizing in the Li<Subscript>2</Subscript>O-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-TiO<Subscript>2</Subscript> System in Different Gaseous Media

The ramsdellite-type phases crystallizing in the Li₂O-Fe₂O₃-TiO₂ system in the course of synthesis in gaseous media at different oxygen partial pressures are studied. Solid solutions based on the ramsdellite structure with the composition Li₂Ti_3?xFe _x O_{7 ? δ} (0 ≤ x ≤ 0.7) are prepared in an oxidizing medium (P_O2 = 1 atm) for the first time. Analysis of the results obtained by electron paramagnetic resonance and Mossbauer spectroscopy revealed that, in these solid solutions, all iron ions are in the oxidation state Fe⁺³.     

Synthesis and crystal structure of a new oxohalide CdPb<Subscript>2</Subscript>O<Subscript>2</Subscript>Cl<Subscript>2</Subscript>

A new compound, CdPb₂O₂Cl₂, is synthesized by the method of solid-phase reactions. The compound has monoclinic symmetry, space group C2/m, a = 12.392(8) Å, b = 3.8040(14) Å, c = 7.658(5) Å, β = 122.64(5)°, and V = 304.0(3) ų. The structure contains one symmetrically independent position of the Pb²⁺ cation coordinated by three O^2? anions (Pb²⁺-O^2? = 2.29–2.34 Å) and five Cl^? anions (Pb²⁺-Cl^? = 3.35–3.57 Å). The Cd²⁺ cation has a symmetric coordination with the formation of two bonds Cd-O = 2.15 Å and four bonds Cd-Cl = 2.73 Å. The oxygen atom is tetrahedrally coordinated by three Pb²⁺ cations and one Cd²⁺ cation, which leads to the formation of oxo-centered heterometallic OPb₃Cd tetrahedra. The tetrahedra are linked together into chains through common Pb atoms and into layered complexes due to sharing of the equatorial Cd atoms. The chlorine atoms are located above the cavities of the oxo-centered layer.     

Crystal structure and thermal expansion of ammonium pentaborate NH<Subscript>4</Subscript>B<Subscript>5</Subscript>O<Subscript>8</Subscript>

Anhydrous ammonium pentaborate NH₄B₅O₈ has been synthesized by thermal dehydration of larderellite NH₄[B₅O₇(OH)₂] · H₂O at a temperature of 290°C for 7 h. The crystal structure has been determined from the X-ray powder diffraction data: a = 7.58667(5) Å, b = 12.00354(8) Å, c = 14.71199(8) Å, R _p = 6.23, R _wp = 7.98, R _B = 12.7, R _F = 8.95, and β-KB₅O₈ structure type. The double interpenetrating framework is formed by pentaborate groups, each consisting of a boron-oxygen tetrahedron and four triangles, in which all oxygen atoms are bridging. The thermal behavior of the NH₄B₅O₈ compound has been investigated using thermal X-ray diffraction. As for other pentaborates of this type, the thermal expansion of the NH₄B₅O₈ compound is anisotropic and reaches a maximum along the a axis. The thermal expansion coefficients are as follows: α _a = 39 × 10^?6, α _b = 6 × 10^?6, α _c = 20 × 10^?6, and α _V = 65 × 10^?6 °C^?1.     

Solution-Combustion Synthesis of LiNi<Subscript>1/3</Subscript>Co<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript> as a Cathode Material for Lithium-Ion Batteries

A cathode material for lithium-ion batteries–LiNi_1/3Co_1/3Mn_1/3O₂–was prepared by solution combustion synthesis and characterized by XRD, SEM, and galvanostatic charge/discharge cycling. The sample calcined at 950°C for 10 h showed best charge/discharge performance. An initial discharge capacity (C) of 150.5 mA h g^–1 retained 95.7% of its value after 75 charge/discharge cycles at I_c = 14 mA g^–1 (0.2C rate), I_d = 70 mA g^–1 (0.5C rate).     

Synthesis and Thermoelectric Properties of Ceramics Based on Bi<Subscript>2</Subscript>Ca<Subscript>2</Subscript>Co<Subscript>1.7</Subscript>O<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> Oxide

Layered ceramics based on bismuth–calcium cobaltite with varied cobalt oxide contents is synthesized by the solid-phase method, the ceramics phase composition is determined, and the microstructure, thermal expansion, electroconductivity, and thermal electromotive force are investigated. The formation of just one compound, ternary oxide composed of Bi₂Ca₂Co_1.7O _y , is established within the quasi-binary Bi₂Ca₂O₅–CoO _z system. The effect of the cobalt oxide content on the Bi₂Ca₂Co _x O _y ceramics’ microstructure and physicochemical properties is analyzed. The single-phased ceramic sample Bi₂Ca₂Co_1.7O _y demonstrated the highest power factor value among all the investigated samples—26.0 μW/(m K²) at a temperature of 300 K. This sample showed the lowest value of the thermal linear expansion coefficient of 9.72 × 10^–6 K^–1.     

SHS of Y<Subscript>2</Subscript>Ti<Subscript>2</Subscript>O<Subscript>7</Subscript>-based mineral-like ceramics: Influence of green density

Explored was the influence of compacting pressure (P) and green density (ρ) on the properties of Zr-doped mineral-like pyrochlore ceramics Y₂(Ti_{1 – x} Zr _x )₂O₇ (x ≤ 0.3) prepared by SHS method. The optimal ρ values that provide minimal porosity and maximal mechanical strength of synthesized ceramics were found. An increase in ρ was found to decrease combustion temperature and increase pyrochlore lattice parameter a. Green density was also found to affect phase composition of the SHS-produced ceramics under study.     

Thermal behavior of layered perovskite-like compounds in the Bi<Subscript>4</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript>-BiFeO<Subscript>3</Subscript> system

The thermal properties of compounds of the general formula Bi _{m + 1} Fe _{m ? 3} Ti₃O_{3m + 3}, which are layered perovskite-like phases of the Aurivillius type, are investigated as a function of their composition. It is demonstrated that the temperature of decomposition of the Bi _{m + 1} Fe _{m ? 3} Ti₃O_{3m + 3} compounds decreases with an increase in the thickness of perovskite-like layers alternating in the structure and that the composition dependence of the temperature of the structural transition observed in these compounds exhibits a more complex behavior. The linear thermal expansion coefficients of all the compounds under investigation are found to be virtually independent of the composition.     

AC Conductivity and Dielectric Behavior of Silicophosphate Glass Doped by Nd<Subscript>2</Subscript>O<Subscript>3</Subscript>

Silicophosphate glasses of nominal composition (P₂ O ₅ 50%-SiO₂ 30%-Na₂O 20%) and Nd₂ O ₃ additive (0.5 and 2 wt%) were prepared and dielectric behavior has been studied over a temperature range (302–483 K) in the frequency range (0.5 - 3243 kHz). Frequency dependence of AC conductivity (σ _ac), has been explored using the universal power law. Disparity of the frequency exponent (s) with temperature was examined in terms of diverse conduction mechanisms. The principal conduction mechanisms were found correlated to both barrier hopping (CBH) and quantum mechanical tunneling (QMT) models. Temperature dependence of σ _ac (ω) showed a linear increase with different frequencies. In addition, the capacitance, loss tangent, dielectric loss and dielectric constant were calculated over variable temperature ranges and frequencies.     

Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles coated by new functionalized tetraaza-2,3 dialdehyde micro-crystalline cellulose: synthesis,characterization, and catalytic application for degradation of Acid Yellow 17

In this study, we developed an original approach for preparing cellulose-coated magnetite nanoparticles (NPs). Two novel Schiff bases (PDA-g-DAC) and [Bz-(PDA-g-DAC)] were synthesized via condensation reactions of periodate oxidized micro-crystalline cellulose (DAC) with o-phenylene diamine (PDA) to obtain its azomethine derivative with 85% yield. Subsequently, the functionalization of (PDA-g-DAC) with benzil (Bz) yields the tetraaza macrocycle [Bz-(PDA-g-DAC)]. The physicochemical characterization of the condensation products was performed using ¹³CNMR, FTIR, ATG, DSC, and X-ray diffraction techniques. Magnetic nanomaterial-based Schiff base cellulose was successfully prepared using in situ chemical co-precipitation of coordinated ferric and ferrous ions in cellulose Schiff base matrix under optimized conditions, and then, its magnetic properties were characterized. The results demonstrated that the Fe₃O₄ NPs coated with [Bz-(PDA-g-DAC)] were homogeneously coated in the matrix under ultrasonic irradiation with the saturation magnetization of 69.50 emu g^?1. In addition, XRD line broadening analysis showed that the average particle size of the NPs was 37.3 nm. Furthermore, FTIR spectra demonstrated that [Bz-(PDA-g-DAC)] concavity was anchored to magnetite Fe₃O₄ NPs through azomethine groups. Vibrating sample magnetometry (VSM) of [Bz-(PDA-g-DAC)@Fe₃O₄] magnetic nanocomposite samples showed the typical behavior of ferromagnetism. This study provided a green and facile method to inhibit magnetic nanoparticle aggregation. Activity results revealed that the prepared [Bz-(PDA-g-DAC)@Fe₃O₄] catalyst shows the maximum activity for degradation of Acid Yellow 17 (AY17) compared to other prepared catalysts. After degradation reaction, the [Bz-(PDA-g-DAC)@Fe₃O₄] catalyst was recovered from the reaction mixture via an external magnet and used for further five consecutive cycles with excellent catalytic activity, successively, which was comparable to the fresh catalyst. The catalyst degradation efficiency and its easy separation exhibited that [Bz-(PDA-g-DAC)@Fe₃O₄] catalyst is a promising material for the removal of AY17 from aqueous solutions in green chemistry perspectives.     

Phase transformations in <Emphasis Type="Italic">t</Emphasis>-ZrO<Subscript>2</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoprecursors and formation of the microstructure of related ceramic materials

The phase transformations in nanosized precursors (precipitation products) prepared by the sol-gel processing and the formation of the microstructure of ceramic materials in the t-ZrO₂-Al₂O₃ system are investigated. It is demonstrated that the phase transformation occurring during the precipitation depends on the precrystallization state that is governed by a sequence of precipitation of the components in the Al₂O₃-ZrO₂-CeO₂ system in the course of the synthesis of precursors. The nascent metastable phases of solid solutions based on t-ZrO₂ and θ-Al₂O₃ subsequently have a substantial effect on the sizes of grains in the microstructure of the corresponding ceramics.     

Synthesis and crystal structure of the low-temperature modification of Li<Subscript>12</Subscript>Zn<Subscript>4</Subscript>(P<Subscript>2</Subscript>O<Subscript>7</Subscript>)<Subscript>5</Subscript>

The crystal structure of a low-temperature modification of the Li₁₂Zn₄(P₂O₇)₅ compound has been determined by full-profile analysis from the X-ray powder diffraction data. The compound crystallizes in the monoclinic crystal system (a = 5.130(1) Å, b = 13.454(1) Å, c = 8.205(1) Å, β = 90.36(1)°, space group P2₁/n, Z = 4) and has a framework structure in which the zinc and lithium atoms statistically occupy equivalent positions.     

Influence of pressure on the refractive index and relative density of glasses in the CaO-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> system

The pressure dependences of the refractive index for aluminosilicate glasses of the compositions 0.167CaO · 0.167Al₂O₃ · 0.666SiO₂ and 0.157CaO · 0.177Al₂O₃ · 0.666SiO₂ at pressures up to 6.0 GPa are determined using a polarizing interference microscope and an apparatus with diamond anvils. The compressibilities of the glasses are calculated from the measured refractive indices within the framework of the theory of photoelasticity. The structural-chemical parameters NBO/T (where NBO is the number of gram-ions of nonbridging oxygen atoms and T is the total number of gram-ions of network formers) are calculated for the glasses under investigation with allowance made for the formation of triclusters and highly coordinated aluminum.     

Enhancement of UV-aging resistance of UV-curable polyurethane acrylate coatings via incorporation of hindered amine light stabilizers-functionalized TiO<Subscript>2</Subscript>-SiO<Subscript>2</Subscript> nanoparticles

In this study, polymeric hindered amine light stabilizers (HALS)-functionalized silica coated rutile titanium dioxide (TiO₂-SiO₂) nanoparticles were prepared by encapsulating commercially available TiO₂-SiO₂ nanoparticles with methyl methacrylate (MMA) and 1,2,2,6,6-pentamethyl-4-piperidyl methacrylate (PMPM) copolymers via miniemulsion polymerization. The obtained functional (TiO₂-SiO₂/P(MMA-co-PMPM)) fillers have been added to polyurethane acrylate (PUA) oligomers to get UV-curable nanocomposite coatings. The functionalization of the TiO₂-SiO₂ nanoparticles with polymeric HALS has been confirmed by infrared spectra (IR), thermogravimetric (TG), and X-ray photoelectron spectroscopy (XPS) analyses. The scanning electron microscope (SEM) micrographs indicated that homogeneous dispersion of TiO₂-SiO₂/P(MMA-co-PMPM) composite nanoparticles resulted in improved transparency and mechanical properties of the UV-curable PUA coatings. Rhodamine B (Rh.B) photodegradation measurement confirmed the excellent UV-shielding performance of PUA nanocomposite coatings containing TiO₂-SiO₂/P(MMA-co-PMPM). The addition of TiO₂-SiO₂/P(MMA-co-PMPM) composite nanoparticles reduced the UV-curable PUA coatings degradation rate dramatically. The UV-aging resistance of PUA coatings was improved significantly. Over all, the combination of TiO₂-SiO₂ nanoparticles and polymeric HALS offers an attractive way to fabricate the multi-functional fillers, which can be used to improve the mechanical properties and UV-aging resistance of PUA coatings simultaneously.     

Selection of the optimum composition of an alumina support of Pd/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts for pyrolysis gasoline hydrogenation

To optimize the chemical composition of catalysts for the selective hydrogenation of diene and vinyl aromatic hydrocarbons in pyrolysis gasoline, we study the effect of the acid-base and textural characteristics of a support modified with additives of sodium compounds on the activity and stability of the catalysts in reactions of hydrogenation and oligomerization of unsaturated compounds. It is shown that the rate of formation of oligomeric compounds depends on the number of Lewis (Q _CO > 34 kJ/mol) and Brönsted sites (ν_OH = 3688 cm^?1). An increase in their total amount on the catalyst surface leads to an increase in the rate of formation of oligomeric hydrocarbons. The amount of surface condensation products is determined by the concentration of strong aprotic sites with Q _CO > 35 kJ/mol. Alumina support samples with a high surface concentration of medium-strong Lewis sites, wedge-shaped or conical pores, and the preferential distribution of porometric volume in pores with a diameter of 5–15 nm are characterized by a significant ability to oligomerize unsaturated compounds. Catalysts that contain 0.5 wt % Na exhibit the lowest oligomerization ability and a high stabile activity in reactions of hydrogenation of diene and vinyl aromatic hydrocarbons in pyrolysis gasoline. For the selective hydrogenation of diene and vinyl aromatic hydrocarbons in pyrolysis gasoline, we recommend a catalyst with 0.5 wt % Pd supported from palladium acetylacetonate on δ-Al₂O₃ modified with 0.5 wt % sodium; it is characterized by the absence of wedge-shaped or conical pores, the preferential (60.7%) distribution of porometric volume in a range of d _p > 15 nm, and a low aprotic acidity (L = 3.1 μmol/g), which contributes to the decrease in the amount of resulting condensation products (V = 3.6 μg/(gcat h)) and a high stable activity (DN = 0.68 g J₂/100 g) in reactions of hydrogenation of unsaturated compounds.     

V<Subscript>2</Subscript><Emphasis Type="Italic">O</Emphasis><Subscript>5</Subscript>/SiO<Subscript>2</Subscript> as a Heterogeneous Catalyst in the Synthesis of bis(indolyl)methanes Under Solvent Free Condition

The heterogeneous catalyst of V₂ O ₅/SiO₂ was prepared and characterized with Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy. XRD of the silicon dioxide used reveals the amorphous nature while the spectrum of the prepared catalyst shows sharp intense peaks at about (20.2, 26.1, 31.0 and 47.3^°) and less intense sharp peaks at about (51.1, 55.2, 57.1 and 60.4^°) indicating formation of a crystalline phase with orthorhombic geometry. The FTIR spectra of the catalyst showed characteristic vibration stretching bands of V ?O at their specified position. An efficient and facile approach for the synthesis of bis(indolyl)methanes through a catalytic one pot reaction. Indole and aromatic aldehydes were stirred in the presence of a catalytic amount of the prepared and characterized heterogeneous catalyst V₂ O ₅/SiO₂ at 50^°C under solvent free condition. This procedure has advantages in competition with the previously reported methods, in terms of high yield, green catalyst, mild reaction condition, simple procedure, lack of toxicity, low cost, and simplicity of workup.     

Catalytic combustion of volatile aromatic compounds over CuO-CeO<Subscript>2</Subscript> catalyst

Ce_1?x Cu _x O₂ oxide solid solution catalysts with different Ce/Cu mole ratios were synthesized by the one-pot complex method. The prepared Ce_1?x Cu _x O₂ catalysts were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and H₂ temperature-programmed reduction (H₂-TPR). Their catalytic properties were also investigated by catalytic combustion of phenyl volatile organic compounds (PVOCs: benzene, toluene, xylene, and ethylbenzene) in air. XRD analysis confirmed that the CuO species can fully dissolve into the CeO₂ lattice to form CeCu oxide solid solutions. XPS and H²-TPR results indicated that the prepared Ce_1?x Cu _x O₂ catalysts contain abundant reactive oxygen species and superior reducibility. Furthermore, the physicochemical properties of the prepared Ce_1?x Cu _x O₂ catalysts are affected by the Ce/Cu mole ratio. The CeCu₃ catalyst with Ce/Cu mole ratio of 3.0 contains abundant reactive oxygen species and exhibits superior catalytic combustion activity of PVOCs. Moreover, the ignitability of PVOCs is also affected by the respective physicochemical properties. The catalytic combustion conversions of ethylbenzene, xylene, toluene, and benzene are 99%, 98.9%, 94.3%, and 62.8% at 205, 220, 225, and 225 °C, respectively.