Enhancing the efficiency of simplified red phosphorescent organic light emitting diodes by exciton harvesting

High efficiency red phosphorescent organic light emitting diode (PHOLED) employing co-doped green emitting molecule bis(2-phenylpyridine)(acetylacetonate)iridium(III) [Ir(ppy)₂(acac)] and red emitting molecule bis(2-methyldibenzo[f,h]quinoxaline)(acetylacetonate)iridium(III) [Ir(MDQ)₂(acac)] into 4,4′-bis(carbazol-9-yl)biphenyl (CBP) host in a simplified wide-bandgap platform is demonstrated. The green molecule is shown to function as an exciton harvester that traps carriers to form excitons that are then efficiently transferred to the Ir(MDQ)₂(acac) by triplet-to-triplet Dexter energy transfer, thereby significantly enhancing red emission. In particular, a maximum current efficiency of 37.0 cd/A and external quantum efficiency (EQE) of 24.8% have been achieved without additional out-coupling enhancements. Moreover, a low efficiency roll-off with the EQE remaining as high as 20.8% at a high luminance of 5000 cd/m² is observed.     

High Performance Polymer Electrophosphorescent Devices with tert‐Butyl Group Modified Iridium Complexes as Emitters

The synthesis and photophysical study of two novel tert‐butyl modified cyclometalated iridium(III) complexes, i.e., bis(4‐tert‐butyl‐2‐phenylbenzothiozolato‐N,C^2′) iridium(III)(acetylacetonate) [(tbt)₂Ir(acac)] and bis(4‐tert‐butyl‐1‐phenyl‐1H‐benzimidazolato‐N,C^2′) iridium(III)(acetylacetonate) [(tpbi)₂Ir(acac)], are reported, their molecular structures were characterized by ¹³C NMR, ¹H NMR, ESI‐MS, FT‐IR, and elementary analysis. Compared with their prototypes without tert‐butyl substituents [(bt)₂Ir(acac) and (pbi)₂Ir(acac)], (tbt)₂Ir(acac) and (tpbi)₂Ir(acac) both have shortened phosphorescent lifetimes[(tbt)₂Ir(acac) versus (bt)₂Ir(acac), 1.1 μs:1.8 μs; (pbi)₂Ir(acac) versus (tpbi)₂Ir(acac), 0.8 μs:1.82 μs]. Moreover, (tbt)₂Ir(acac) has much more improved phototoluminescence quantum efficiencies in CH₂Cl₂ solution, [(tbt)₂Ir(acac), 0.51; (bt)₂Ir(acac), 0.26]. Employing them as dopants, high performance double‐layer PLEDs were fabricated. The (tbt)₂Ir(acac)‐based and (tpbi)₂Ir(acac)‐based PLEDs have the maximum external quantum efficiencies of 8.71 % and 10.25 %, respectively, and high EL quantum efficiencies of 5.92 % and 7.21 % can be achieved under high driven current density of 100 mA cm^–2. PLEDs fabricated with both the two phosphors have much broadened EL spectra with FWHM of > 110 nm, which afford the feasibility to be used as dopants in white LEDs, and the best doping concentrations of the two complexes in fabrication of PLEDs were optimized.     

Analysis of exciton annihilation in high-efficiency sky-blue organic light-emitting diodes with thermally activated delayed fluorescence

We study external quantum efficiency (η_EQE) roll-off in organic light-emitting diodes (OLEDs) using thermally-activated delayed fluorescence (TADF) of 4,5-di (9H-carbazol-9-yl) phthalonitrile (2CzPN). Using 2CzPN intramolecular rate constants from optical analyses, we construct an exciton quenching model incorporating intersystem crossing and reverse intersystem crossing. The model indicates that singlet–triplet annihilation and triplet–triplet annihilation dominate η_EQE roll-off because of the relatively long 2CzPN triplet lifetime of 273 μs. This work yields a method to relax the exciton quenching process in TADF based OLEDs.     

An efficient bis(2-phenylquinoline) (acetylacetonate) iridium(III)-based red organic light-emitting diode with alternating guest:host emitting layers

We report a highly efficient electrophosphorescent bis(2-phenylquinoline) (acetylacetonate) iridium(III) [Ir(2-phq)₂(acac)]-based red organic light-emitting diode. The emission layer consists of a periodic thin layer of guest material of Ir(2-phq)₂(acac) separated by host material of 4,4′-Bis(carbazol-9-yl)biphenyl. The guest and host thicknesses were optimized independently to obtain the best performance. The current efficiency reaches to a maximum of 16.2 cd/A then drops to 15 and 11 cd/A at brightness of 10 and 100 cd/m², respectively. By reducing the thickness of the host layer, the power efficiency was further improved. Device with a maximum power efficiency of 8.3 lm/W was obtained. We also found that the concentration quenching in Ir(2-phq)₂(acac) is dominated by molecular aggregation. Excitonic quenching by radiationless Förster process is miniscule.     

Efficient green electroluminescent devices based on iridium complex with wide energy gap complexes as sensitizers

In this work, electroluminescent (EL) performances of a green iridium complex (tfmppy)₂Ir(tpip) were significantly improved by utilizing wide energy gap iridium complexes FK306 and FIrpic as sensitizers. Due to the low-lying energy levels, the co-doped FK306 or FIrpic molecules function as electron trappers, which are helpful in balancing holes and electrons on (tfmppy)₂Ir(tpip) molecules and in broadening exciton recombination zone. Consequently, the co-doped devices displayed high EL efficiencies and slow efficiency roll-off. Compared with FIrpic, FK306 acts as a more effective sensitizer because of its relatively lower energy levels. Consequently, highly efficient green EL device with maximum current efficiency, power efficiency and brightness up to 102.29 cd/A (external quantum efficiency (EQE) of 25.3%), 88.67 lm/W and 96,268 cd/m², respectively, was realized by optimizing the co-doping concentration of FK306. Even at the practical brightness of 1000 cd/m², EL current efficiency up to 92.93 cd/A (EQE = 23%) can still be retained.     

High efficiency yellowish green phosphorescent emitter derived from phenylbenzothienopyridine ligand

A yellowish green phosphorescent dopant derived from phenylbenzothienopyridine ligand, iridium (III) [bis(1-phenylbenzo[4,5]thieno[2,3-c]pyridinato-N,C²]picolinate. (Ir(DTNP)₂pic) was synthesized and the device performances of the Ir(DTNP)₂pic was studied. The Ir(DTNP)₂pic dopant exhibited yellowish green emission at 548 nm and showed a high quantum efficiency of 22.4% at 1000 cd/m² with a color coordinate of (0.43, 0.57) in yellowish green phosphorescent organic light-emitting diodes.     

Carbazole-bridged triphenylamine-bipyridine bipolar hosts for high-efficiency low roll-off multi-color PhOLEDs

Three new bipolar molecules composed of carbazole, triarylamine, and bipyridine were synthesized and utilized as host materials in multi-color phosphorescent OLEDs (PhOLEDs). These carbazole-based materials comprise a hole-transport triarylamine at C3 and an electron-transport 2,4′- or 4,4′-bipyridine at N9. The different bipyridine isomers and linking topology of the bipyridine with respect to carbazole N9 not only allows fine-tuning of physical properties but also imparts conformational change which subsequently affects molecular packing and carrier transport properties in the solid state. PhOLEDs were fabricated using green [(ppy)₂Ir(acac)], yellow [(bt)₂Ir(acac)], and red [(mpq)₂Ir(acac)] as doped emitters, which showed low driving voltage, high external quantum efficiency (EQE), and extremely low efficiency roll-off. Among these new bipolar materials, the 2Cz-44Bpy-hosted device doping with 10% (ppy)₂Ir(acac) as green emitting layer showed a high EQE of 22% (79.8 cd A⁻¹) and power efficiency (PE) of 102.5 lm W⁻¹ at a practical brightness of 100 cd m⁻². In addition, the device showed limited efficiency roll-off (21.6% EQE) and low driving voltage (2.8 V) at a practical brightness of 1000 cd m⁻².     

Deep blue phosphorescent organic light-emitting diodes with excellent external quantum efficiency

Highly efficient deep blue phosphorescent organic light-emitting diodes (PHOLEDs) using two heteroleptic iridium compounds, (dfpypy)₂Ir(acac) and (dfpypy)₂Ir(dpm), as a dopant and 9-(3-(9H-carbazol-9-yl)phenyl)-9H-carbazol-3-yl)diphenylphosphine oxide as a host material have been developed. The electroluminescent device of (dfpypy)₂Ir(dpm) at the doping level of 3 wt% shows the best performance with external quantum efficiency of 18.5–20.4% at the brightness of 100–1000 cd/m² and the color coordinate of (0.14, 0.18) at 1000 cd/m².     

Low driving voltage white organic light-emitting diodes with high efficiency and low efficiency roll-off

Single emission layer white organic light-emitting diodes (WOLEDs) showing high color stability, low turn-on voltage, high efficiency and low efficiency roll-off by incorporating iridium(III) bis[(4,6-difluo-rophenyl)-pyridinato-N,C2] (FIrpic) and bis(2-phenylbenzothiazolato) (acetylacetonate)iridium(III) (Ir(BT)₂(acac)) phosphors dyes have been demonstrated. Our WOLEDs without any out-coupling schemes as well as n-doping strategies show low operating voltages, low turn-on voltage (defined for voltage to obtain a luminance of 1 cd/m²) of 2.35 V, 79.2 cd/m² at 2.6 V, 940.5 cd/m² at 3.0 V and 10 300 cd/m² at 4.0 V, respectively, and achieve a current efficiency of 40.5 cd/A, a power efficiency of 42.6 lm/W at a practical brightness of 1000 cd/m², and a low efficiency roll-off 14.7% calculated from the maximum efficiency value to that of 5000 cd/m². Such improved properties are attributed to phosphors assisted carriers transport for achieving charge carrier balance in the single light-emitting layer (EML). Meanwhile the host–guest energy transfer and direct exciton formation process are two parallel pathways serve to channel the overall excitons to dopants, greatly reduced the unfavorable energy losses.     

Indenocarbazole based bipolar host materials for highly efficient yellow phosphorescent organic light emitting diodes

We report bipolar host materials with robust indenocarbazole and biphenyl moiety as hole-electron-transporting unit for phosphorescent yellow organic light-emitting diodes (OLEDs). New host materials demonstrated an excellent morphological stability with high glass transition temperature of 207 °C. Simultaneously, it also revealed appropriate triplet energy of about 2.6 eV for ideal triplet energy transfer to yellow phosphorescent dopant. A phosphorescent yellow OLED with new host ICBP1 (and ICBP2) and conventional yellow dopant iridium(III)bis(4-(4-t-butylphenyl)thieno[3,2-c]pyridinato-N,C2′)acetylacetonate (Ir(tptpy)₂acac) shows a low driving voltage of 3.4 (and 3.6 V) at 1000 cd/m², and maximum external quantum efficiency as high as 26.4%. Such efficient performance of phosphorescent yellow OLEDs is attributed to a good charge balance and high electron transport properties of host materials.     

Efficient single layer RGB phosphorescent organic light-emitting diodes

We report efficient single layer red, green, and blue (RGB) phosphorescent organic light-emitting diodes (OLEDs) using a “direct hole injection into and transport on triplet dopant” strategy. In particular, red dopant tris(1-phenylisoquinoline)iridium [Ir(piq)₃], green dopant tris(2-phenylpyridine)iridium [Ir(ppy)₃], and blue dopant bis(3,5-difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl)iridium [FIrpic] were doped into an electron transporting 1,3,5-tris(N-phenylbenzimidazole-2-yl)benzene (TPBi) host, respectively, to fabricate RGB single layer devices with indium tin oxide (ITO) anode and LiF/Al cathode. It is found that the maximum current efficiencies of the devices are 3.7, 34.5, and 6.8 cd/A, respectively. Moreover, by inserting a pure dopant buffer layer between the ITO anode and the emission layer, the efficiencies are improved to 4.9, 43.3, and 9.8 cd/A, respectively. It is worth noting that the current efficiency of the green simplified device was as high as 34.6 cd/A, even when the luminance was increased to 1000 cd/m² at an extremely low applied voltage of only 4.3 V. A simple accelerated aging test on the green device also shows the lifetime decay of the simplified device is better than that of a traditional multilayered one.     

Extremely low driving voltage electrophosphorescent green organic light-emitting diodes based on a host material with small singlet–triplet exchange energy without p- or n-doping layer

In order to achieve low driving voltage, electrophosphorescent green organic light-emitting diodes (OLEDs) based on a host material with small energy gap between the lowest excited singlet state and the lowest excited triplet state (ΔE_ST) have been fabricated. 2-biphenyl-4,6-bis(12-phenylindolo[2,3-a] carbazole-11-yl)- 1,3,5-triazine (PIC–TRZ) with ΔE_ST of only 0.11 eV has been found to be bipolar and used as the host for green OLEDs based on tris(2-phenylpyridinato) iridium(III) (Ir(ppy)₃). A very low onset voltage of 2.19 V is achieved in devices without p- or n-doping. Maximum current and power efficiencies are 68 cd/A and 60 lm/W, respectively, and no significant roll-off of current efficiency (58 cd/A at 1000 cd/m² and 62 cd/A at 10,000 cd/m²) have been observed. The small roll-off is due to the improved charge balance and the wide charge recombination zone in the emissive layer.     

Highly efficient bluish green phosphorescent organic light-emitting diodes based on heteroleptic iridium(III) complexes with phenylpyridine main skeleton

A new series of heteroleptic iridium(III) complexes, bis(2-phenylpyridinato-N,C2′)iridium (2-(2′,4′-difluorophenyl)-4-methylpyridine), (ppy)₂Ir(dfpmpy) and bis(2-(2′,4′-difluorophenyl)-4-methylpyridinato-N,C2′)iridium (2-phenylpyridine) (dfpmpy)₂Ir(ppy), have been synthesized by using phenylpyridine as a main skeleton for bluish green phosphorescent organic light-emitting diodes (PhOLEDs). The Ir(III) complexes showed high thermal stability and high photoluminescent (PL) quantum yields of 95% ± 4% simultaneously. As a result, the PhOLEDs with the heteroleptic Ir(III) complexes showed excellent performances approaching 100% internal quantum efficiency with a very high external quantum efficiency (EQE) of ∼27%, a low turn-on voltage of 2.4 V, high power efficiency of ∼85 lm/W, and very low efficiency roll-off up to 20,000 cd/m².     

Amorphous Diphenylaminofluorene‐Functionalized Iridium Complexes for High‐Efficiency Electrophosphorescent Light‐Emitting Diodes

Two new phosphorescent iridium(III ) cyclometalated complexes, [Ir(DPA‐Flpy)₃] ( 1 ) and [Ir(DPA‐Flpy)₂(acac)] ( 2 ) ((DPA‐Flpy)H = (9,9‐diethyl‐7‐pyridinylfluoren‐2‐yl)diphenylamine, Hacac = acetylacetone), have been synthesized and characterized. The incorporation of electron‐donating diphenylamino groups to the fluorene skeleton is found to increase the highest occupied molecular orbital (HOMO) levels and add hole‐transporting ability to the phosphorescent center. Both complexes are highly amorphous and morphologically stable solids and undergo glass transitions at 160 and 153 °C, respectively. These iridium phosphors emit bright yellow to orange light at room temperature with relatively short lifetimes (< 1 μs) in both solution and the solid state. Organic light‐emitting diodes (OLEDs) fabricated using 1 and 2 as phosphorescent dopant emitters constructed with a multilayer configuration show very high efficiencies. The homoleptic iridium complex 1 is shown to be a more efficient electrophosphor than the heteroleptic congener 2 . Efficient electrophosphorescence with a maximum external quantum efficiency close to 10 % ph/el (photons per electron), corresponding to a luminance efficiency of ～ 30 cd A^–1 and a power efficiency of ～ 21 lm W^–1, is obtained by using 5 wt.‐% 1 as the guest dopant.     

Suppression of efficiency roll-off in highly efficient blue phosphorescent organic light-emitting devices using novel iridium phosphors with good electron mobility

High-efficiency blue organic light-emitting diodes were reported by adopting two novel iridium phosphors. Due to phosphoryl moiety in ancillary ligands, both complexes (dfppy)₂Ir(ppp) and (dfppy)₂Ir(dpp) (dyppy = 2-(2,4-difluorophenyl)pyridine, ppp = phenyl(pyridin-2-yl)phosphinate, dpp = dipyridinylphosphinate) own high electron mobility which can balance the injection and transport of carriers. Furthermore, the double light-emitting layers with TcTa (4,4′,4″-tris(carbazol-9-yl)triphenylamine) and 26DCzPPy (2,6-bis(3-(carbazol-9-yl)phenyl)pyridine) hosts broaden the exciton formation zone and suppress efficiency roll-off. The optimized double light-emitting layers devices exhibited decent performances with peak current efficiency near 50 cd/A and external quantum efficiency above 20% as well as negligible efficiency roll-off.     

Ideal host and guest system in phosphorescent OLEDs

Ideal host-guest system for emission in phosphorescent OLEDs with only 1% guest doping condition for efficient energy transfer have been demonstrated in the present investigation. Using a narrow band-gap fluorescent host material, bis(10-hydroxybenzo[h] quinolinato)beryllium complex (Bebq₂), and red dopant bis(2-phenylquinoline)(acetylacetonate)iridium (Ir(phq)₂acac), highly efficient red phosphorescent OLEDs (PHOLEDs) exhibiting excellent energy transfer characteristics with a doping concentration of 1% were developed. Fabricated PHOLEDs show a driving voltage of 3.7 V, maximum current and power efficiencies of 26.53 cd/A and 29.58 lm/W, and a maximum external quantum efficiency of 21%. Minimized electron or hole trapping at the phosphorescent guest molecules and efficient Förster and Dexter energy transfers from the Bebq₂ host singlet and triplet states to the emitting triplet of Ir(phq)₂acac guest appear to be the key mechanism for ideal phosphorescence emission.     

Highly efficient two component phosphorescent organic light-emitting diodes based on direct hole injection into dopant and gradient doping

A series of two component phosphorescent organic light-emitting diodes (PHOLEDs) combing the direct hole injection into dopant strategy with a gradient doping profile were demonstrated. The dopant, host, as well as molybdenum oxide (MoO₃)-modified indium tin oxide (ITO) anode were investigated. It is found that the devices ITO/MoO₃ (0 or 1 nm)/fac-tris(2-phenylpyridine)iridium [Ir(ppy)₃]:1,3,5-tris(N-phenylbenzimidazole-2-yl)benzene (TPBi) (30 → 0 wt%, 105 nm)/LiF (1 nm)/Al (100 nm) show maximum external quantum efficiency (EQE) over 20%, which are comparable to multi-layered PHOLEDs. Moreover, the systematic variation of the host from TPBi to 4,7-diphenyl-1,10-phenanthroline (Bphen), dopant from Ir(ppy)₃ to bis(2-phenylpyridine)(acetylacetonate)iridium [Ir(ppy)₂(acac)], and anodes between ITO and ITO/MoO₃ indicates that balancing the charge as well as controlling the charge recombination zone play critical roles in the design of highly efficient two component PHOLEDs.     

Harvesting Excitons Via Two Parallel Channels for Efficient White Organic LEDs with Nearly 100% Internal Quantum Efficiency: Fabrication and Emission‐Mechanism Analysis

By incorporating two phosphorescent dyes, namely, iridium(III)[bis(4,6‐difluorophenyl)‐pyridinato‐N,C²′]picolinate (FIrpic) for blue emission and bis(2‐(9,9‐diethyl‐9H‐fluoren‐2‐yl)‐1‐phenyl‐1H‐benzoimidazol‐N,C³)iridium(acetylacetonate) ((fbi)₂Ir(acac)) for orange emission, into a single‐energy well‐like emissive layer, an extremely high‐efficiency white organic light‐emitting diode (WOLED) with excellent color stability is demonstrated. This device can achieve a peak forward‐viewing power efficiency of 42.5 lm W^?1, corresponding to an external quantum efficiency (EQE) of 19.3% and a current efficiency of 52.8 cd A^?1. Systematic studies of the dopants, host and dopant‐doped host films in terms of photophysical properties (including absorption, photoluminescence, and excitation spectra), transient photoluminescence, current density–voltage characteristics, and temperature‐dependent electroluminescence spectra are subsequently performed, from which it is concluded that the emission natures of FIrpic and (fbi)₂Ir(acac) are, respectively, host–guest energy transfer and a direct exciton formation process. These two parallel pathways serve to channel the overall excitons to both dopants, greatly reducing unfavorable energy losses. It is noteworthy that the introduction of the multifunctional orange dopant (fbi)₂Ir(acac) (serving as either hole‐trapping site or electron‐transporting channel) is essential to this concept as it can make an improved charge balance and broaden the recombination zone. Based on this unique working model, detailed studies of the slight color‐shift in this WOLED are performed. It is quantitatively proven that the competition between hole trapping on orange‐dopant sites and undisturbed hole transport across the emissive layer is the actual reason. Furthermore, a calculation of the fraction of trapped holes on (fbi)₂Ir(acac) sites with voltage shows that the hole‐trapping effect of the orange dopant is decreased with increasing drive voltage, leading to a reduction of orange emission.     

Enhancement of the current efficiency of organic light-emitting devices due to the surface plasmonic resonance effect of dodecanethilol-functionalized Au nanoparticles

The photoluminescence intensity of the dodecanethilol-functionalized Au (DDT-Au) nanoparticle (NP) layer/4,4′-cyclohexylidenebis[N,N-bis(4-methylphenyl)benzenamine] (TAPC)/4,4′-bis(N-carbazolyl)-1,1′-biphenyl:tris(2-phenylpyridine)iridium (III) (CPB:Ir(ppy)₃) film was increased by about 1.15 times compared to that of the TAPC/CPB:Ir(ppy)₃ film due to the effect of coupling between the excitons in the emitting layer and a localized surface plasmonic resonance (LSPR) in the DDT-Au NPs. The current efficiency of the organic light-emitting devices (OLEDs) with the DDT-Au NP layer at 100 cd/m² was 14.9 cd/A larger than that without the DDT-Au NP layer, resulting in an enhancement of the out-coupling efficiency. The increase in the current efficiency of the OLEDs with a DDT-Au NP layer was attributed to the enhanced out-coupling efficiency due to the existence of the LSPR generated by the DDT-Au NPs.     

Green and blue-green phosphorescent heteroleptic iridium complexes containing carbazole-functionalized β-diketonate for non-doped organic light-emitting diodes

Two novel iridium complexes both containing carbazole-functionalized β-diketonate, Ir(ppy)₂(CBDK) [bis(2-phenylpyridinato-N,C²)iridium(1-(carbazol-9-yl)-5,5-dimethylhexane-2,4-diketonate)], Ir(dfppy)₂(CBDK) [bis(2-(2,4-difluorophenyl)pyridinato-N,C²)iridium(1-(carbazol-9-yl)-5,5-dimethylhexane-2,4-diketonate)] and two reported complexes, Ir(ppy)₂(acac) (acac = acetylacetonate), Ir(dfppy)₂(acac) were synthesized and characterized. The electrophosphorescent properties of non-doped device using the four complexes as emitter, respectively, with a configuration of ITO/N,N′-diphenyl-N,N′-bis(1-naphthyl)-1,1′-diphenyl-4,4′-diamine (NPB) (20 nm)/iridium complex (20 nm)/2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (BCP) (5 nm)/tris(8-hydroxyquinoline)aluminum (AlQ) (45 nm)/Mg_0.9Ag_0.1 (200 nm)/Ag (80 nm) were examined. In addition, a most simplest device, ITO/Ir(ppy)₂(CBDK) (80 nm)/Mg_0.9Ag_0.1 (200 nm)/Ag (80 nm), and two double-layer devices with configurations of ITO/NPB (30 nm)/Ir(ppy)₂(CBDK) (30 nm)/Mg_0.9Ag_0.1 (200 nm)/Ag (80 nm) and ITO/Ir(ppy)₂(CBDK) (30 nm)/AlQ (30 nm)/Mg_0.9Ag_0.1 (200 nm)/Ag (80 nm) were also fabricated and examined. The results show that the non-doped four-layer device for Ir(ppy)₂(CBDK) achieves maximum lumen efficiency of 4.54 lm/W and which is far higher than that of Ir(ppy)₂(acac), 0.53 lm/W, the device for Ir(dfppy)₂(CBDK) achieves maximum lumen efficiency of 0.51 lm/W and which is also far higher than that of Ir(dfppy)₂(acac), 0.06 lm/W. The results of simple devices involved Ir(ppy)₂(CBDK) show that the designed complex not only has a good hole transporting ability, but also has a good electron transporting ability. The improved performance of Ir(ppy)₂(CBDK) and Ir(dfppy)₂(CBDK) can be attributed to that the bulky carbazole-functionalized β-diketonate was introduced, therefore the carrier transporting property was improved and the triplet–triplet annihilation was reduced.