TBP precursor agent passivated ZnO electron transport layer for highly efficient polymer solar cells

Defects passivation in electron transport layer (ETL) is a key issue to optimize the performance of polymer solar cells (PSCs). In this work, a novel strategy is developed to form defects passivated ZnO ETL by introducing 4-tert-butylpyridine (TBP) agent into precursor. While the power conversion efficiency (PCE) of the inverted PSCs based poly{4,8-bis [(2-ethylhexyl)oxy]benzo [1,2-b:4,5-b']dithiophene-2,6-diyl-alt-3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno [3,4-b]thiophene-4,6-diyl}:[6,6]-phenyl C71-butyric acid methyl ester (PTB7:PC₇₁BM) with the pure ZnO ETL is 8.02%, that of the device with modified ZnO ETL is dramatically improved to 10.26%, with TBP accounting for ~28% efficiency improvement. Our study demonstrates that the precursor agent significantly affect the surface morphology and size of ZnO in ETL. Furthermore, it proves that the ZnO ETL with TBP (T-ZnO) is beneficial to polish interfacial contact between ETL and active layer and depress exciton quenching loss, resulting in enhanced exciton dissociation, efficient carrier collection and reduced charge recombination, thus improving the device performance. To verify the universality of T-ZnO ETL, the champion photovoltaic performance with a PCE of 11.74% (10% improvement) is obtained in the PBDB-T-2F:IT-4F based nonfullerene PSCs using T-ZnO as ETL. Our work developed a new, universal and facile strategy for designing highly efficient PSCs based on fullerene and nonfullerene blend systems.     

Copolymers based on thiazolothiazole-dithienosilole as hole-transporting materials for high efficient perovskite solar cells

The interlayers, including hole transporting layer (HTL) and electron transporting layer (ETL), segregating photoactive layer and the electrodes play an important role in charge extraction and transportation in perovskite solar cells (pero-SCs). Two novel copolymers, PDTSTTz and PDTSTTz-4, for the first time were applied as HTL in the n-i-p type pero-SCs, with the device structure of ITO/compact TiO₂/CH₃NH₃PbI_3-xCl_x/HTL/MoO₃/Ag. The highest occupied molecular orbitals (HOMO) levels of PDTSTTz and PDTSTTz-4 exhibit a suitable band alignment with the valence band edge of the perovskite. Both of them lead to improved device performances compared with reference pero-SCs based on P3HT as HTL. To further balance the charge extraction and the diffusion length of charge carriers, pristine C₆₀ was introduced at the cathode side of the pero-SCs, working together with TiO₂ as ETL. With insertion of both the HTL and ETL, the performance of pero-SCs was greatly enhanced. The optimized devices exhibited impressive PCEs of 14.4% and 15.8% for devices based on PDTSTTz and PDTSTTz-4. The improved performance is attributed to better light harvest ability, decreased interface resistance and faster decay time due to the introduction of the interlayers.     

Effective protection of sequential solution-processed polymer/fullerene bilayer solar cell against charge recombination and degradation

Both charge recombination and degradation in sequential solution processed polymer/fullerene bilayer organic photovoltaics (OPV) are effectively reduced by the insertion of a TiO₂ inter-layer between the bilayer and Al electrode. The polymer/fullerene bilayer composed of a poly(3-hexylthiophene) (P3HT) bottom-layer and a [6,6] phenyl C61-butyric acid methyl ester (PCBM) top-layer shows significant change in morphology due to the substantial inter-penetration of P3HT and PCBM during the thermal annealing process. Consequently, the bilayer surface becomes P3HT rich resulting in significant charge recombination at the bilayer/Al interface of the bilayer OPV. The charge recombination rate of the bilayer OPV is reduced by one order of magnitude upon the insertion of a TiO₂ nanoparticle inter-layer between the bilayer and the Al electrode after the thermal annealing process. In contrast, when the thermal annealing process is conducted after insertion of the inter-layer, the effect of the TiO₂ inter-layer becomes insignificant. The V_OC and efficiency of the bilayer OPV is greatly enhanced from 0.37 to 0.66 V and 1.2% to 3.7%, respectively by utilizing the properly constructed TiO₂ inter-layer in the bilayer OPV. Additionally, insertion of the TiO₂ inter-layer significantly improves the stability of the bilayer OPV. The bilayer OPV with a TiO₂ inter-layer maintains 51% of its initial PCE after storage under dark ambient conditions for 700 h without encapsulation, whereas the bilayer OPV without a TiO₂ inter-layer did not show any solar cell performance after 200 h under the same conditions.     

Efficient organic photovoltaics using solution-processed,annealing-free TiO2 nanocrystalline particles as an interface modification layer

A solution-processed, annealing-free TiO₂ nanocrystalline particles (TiO₂ NPs) as an interface modification layer was inserted in organic photovoltaics (OPVs), in which the widely used polymer poly (3-hexyl thiophene) (P3HT), a low band gap alkoxylphenyl substituted [1,2-b:4,5-b′] dithiophene-based polymer (PBDTPO-DTBO), and a soluble small molecule benzodithiophene derivative (TIBDT) were used as the donor material, respectively. The annealing-free TiO₂ NPs could be easily spin-coated upon the surface of organic active layers, and showed comparable properties to thermal-annealed ones. The power conversion efficiencies (PCEs) of OPV devices could be enhanced dramatically with inserting an annealing-free TiO₂ NPs layer. The PCEs of OPV devices based on P3HT:PC₆₁BM, PBDTPO-DTBO:PC₇₁BM and TIBDT:PC₆₁BM bulk heterojunctions were improved by 28%, 15% and 27%, respectively, with an annealing-free TiO₂ NPs layer, in which the highest PCE of 5.76% was achieved in PBDTPO-DTBO:PC₇₁BM OPVs. The solution-processed, annealing-free TiO₂ NPs thin films show great potential applications in the fabrication of large-area OPVs by printing or coating techniques on flexible polymer substrates. In particularly, it would promote to fabricate solution-processed, annealing-free OPV devices with suitable hole transport layer and organic/polymer active materials.     

Rubrene-based interfacial engineering toward enhanced performance in inverted polymer solar cells

Rubrene, an organic semiconductor having stable fused-ring molecular structure was used as a double interfacial layer in inverted organic solar cells. When a thin, 3 nm-thick layer of rubrene was introduced between a MoO₃-based hole-collecting layer and a bulk-heterojunction (BHJ) photo-active layer consisting of poly{4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl-alt-3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophene-4,6-diyl} (PTB7) and [6,6]-phenyl C₇₁-butyric acid methyl ester (PC₇₁BM), the power conversion efficiency was improved over 12% (from 7.2% to 8.1%). It was demonstrated that the insertion of thin rubrene layer showed suppressed exciton quenching and improved exciton dissociation, resulting in more efficient charge carrier collection and weaker charge recombination, thus improving the device performance.     

Improved photovoltaic characteristics of organic cells with heterointerface layer as a hole-extraction layer inserted between ITO anode and donor layer

We have fabricated an improved organic photovoltaic (OPV) cell in which organic heterointerface layer is inserted between indium-tin-oxide (ITO) anode and copper-phthalocyanine (CuPc) donor layer in the conventional OPV cell of ITO/CuPc/fullerene (C₆₀)/bathophenanthroline (Bphen)/Al to enhance the power conversion efficiency (PCE) and fill factor (FF). The inserted ITO-buffer layer consists of electron-transporting layer (ETL) and hole-transporting layer (HTL). We have changed the ETL and HTL materials variously and also changed their layer thickness variously. It is confirmed that ETL materials with higher LUMO level than the work function of ITO give low PCE and FF. All the double layer buffers give higher PCE than a single layer buffer of TAPC. The highest PCE of 1.67% and FF of 0.57% are obtained from an ITO buffer consisted of 3 nm thick ETL of hexadecafkluoro-copper-phthalocyanine (F₁₆CuPc) and 3 nm thick HTL of 1,1-bis-(4-methyl-phenyl)-aminophenylcyclohexane (TAPC). This PCE is 1.64 times higher than PCE of the cell without ITO buffer and 2.98 times higher than PCE of the cell with single layer ITO buffer of TAPC. PCE is found to increase with increasing energy difference (ΔE) between the HOMO level of HTL and LUMO level of F₁₆CuPc in a range of ΔE < 0.6 eV. From the ΔE dependence of PCE, it is suggested that electrons moved from ITO to the LUMO level of the electron-transporting F₁₆CuPc are recombined, at the F₁₆CuPc/HTL-interface, with holes transported from CuPc to the HOMO level of HTL in the double layer ITO buffer ETL, leading to efficient extraction of holes photo-generated in CuPc donor layer.     

Development of a conjugated donor-acceptor polyelectrolyte with high work function and conductivity for organic solar cells

To achieve highly efficient organic photovoltaic (OPV) devices, the interface between the photoactive layer and the electrode must be modified to afford the appropriate alignment of the energy levels and to ensure efficient charge extraction at the same time as suppressing charge recombination and accumulation. Recently, p-type conjugated polyelectrolytes (CPEs) have emerged as new hole-transporting materials that can be deposited on electrodes through simple solution processes without additional heat treatment. However, the applications of CPEs have been limited so far because the high electron richness of their conjugated backbones result in low work functions, ∼5.0 eV. Here, by inserting a donor−acceptor (D−A) building block into the CPE backbone, we successfully synthesized a new p-type CPE (PhNa-DTBT), which shows a deep work function above 5.3 eV on several electrodes including Au, Ag, and indium tin oxide. More importantly, PhNa-DTBT produces stable polarons on the polymer backbone and thus achieves a high electrical conductivity of 5.7 × 10⁻⁴ S cm⁻¹. As a result, an OPV incorporating PhNa-DTBT as a hole-transporting layer was found to exhibit a high performance with a power conversion efficiency of 9.29%. Also, the OPV device shows improved stability in air due to the neutral characteristics of the CPE which is favorable for stabilizing neighbored active and electrode layers.     

Efficiency enhancement of polymer solar cells by applying an alcohol-soluble fullerene aminoethanol derivative as a cathode buffer layer

Cathode buffer layer (CBL) introduced between the active layer and cathode is crucial for selectively transporting electrons and blocking holes for polymer solar cells (PSCs). Calcium (Ca) is the most commonly used CBL in conventional-structure bulk heterojunction (BHJ) PSC devices, but is prone to oxidation due to its high reactivity, inhibiting its practical applications. Herein, we applied an alcohol-soluble fullerene aminoethanol derivative (C₆₀-ETA) as an efficient CBL surpassing Ca in conventional-structure BHJ-PSC devices, leading to obvious efficiency enhancement with the best power conversion efficiency (PCE) reaching 9.66%. C₆₀-ETA CBL was applied in PSC devices based on three different photoactive layer systems, including poly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)-benzo[1,2-b:4,5-b′]dithiophene-co-3-fluorothieno[3,4-b]thiophene-2-carboxylate]:[6,6]-phenyl C₇₁-butyric acid methyl ester (PTB7-Th:PC₇₁BM), polythieno[3,4-b]thiophene-co-benzodithiophene (PTB7):PC₇₁BM and poly(4,8-bis-alkyloxybenzo(l,2-b:4,5-b′)dithiophene-2,6-diylalt-(alkylthieno(3,4-b)thiophene-2-carboxylate)-2,6-diyl) (PBDTTT-C):PC₇₁BM, affording the best PCE of 9.66%, 8.51% and 7.19%, respectively, which are all higher than those of the corresponding devices based on the commonly used Ca CBL. The mechanism of efficiency enhancement of C₆₀-ETA CBL relative to Ca is studied, revealing that C₆₀-ETA CBL may induce improvements on both the interfacial contact between the active layer/cathode and electron transport, facilitating electron extraction by the Al cathode, and consequently leading to the increase of short-circuit current density (J_sc), which contributes primarily to the PCE improvement.     

A Band‐Edge Potential Gradient Heterostructure to Enhance Electron Extraction Efficiency of the Electron Transport Layer in High‐Performance Perovskite Solar Cells

As the key component in efficient perovskite solar cells, the electron transport layer (ETL) can selectively collect photogenerated charge carriers produced in perovskite absorbers and prevent the recombination of carriers at interfaces, thus ensuring a high power conversion efficiency. Compared with the conventional single‐ or dual‐layered ETLs, a gradient heterojunction (GHJ) strategy is more attractive to facilitate charge separation because the potential gradient created at an appropriately structured heterojunction can act as a driving force to regulate the electron transport toward a desired direction. Here, a SnO₂/TiO₂ GHJ interlayer configuration inside the ETL is reported to simultaneously achieve effective extraction and efficient transport of photoelectrons. With such an interlayer configuration, the GHJs formed at the perovskite/ETL interface act collectively to extract photogenerated electrons from the perovskite layer, while GHJs formed at the boundaries of the interconnected SnO₂ and TiO₂ networks throughout the entire ETL layer can extract electron from the slow electron mobility TiO₂ network to the high electron mobility SnO₂ network. Devices based on GHJ ETL exhibit a champion power conversion efficiency of 18.08%, which is significantly higher than that obtained from the compact TiO₂ ETL constructed under the comparable conditions.     

Morphology Inversion of a Non-Fullerene Acceptor Via Adhesion Controlled Decal-Coating for Efficient Conversion and Detection in Organic Electronics

In this study, a promising film formation technique is highlighted, named mold-assisted decal-coating, as a thin film transfer printing process using the polyurethane acrylate-based stamping mold. By optimizing the surface energy of the mold with wetting coefficient theory, the mold-assisted decal-coating process is successfully demonstrated by transferring the photoactive layer composed of the polymer donor, poly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b;4,5-b′]dithiophene-2,6-diyl-alt-(4-(2-ethylhexyl)-3-fluorothieno[3,4-b]thiophene-)-2-carboxylate-2-6-diyl)] and a narrow bandgap non-fullerene acceptor (NFA), 2,2′-[[4,4,9,9-tetrakis(4-hexylphenyl)-4,9-dihydro-s-indaceno[1,2-b:5,6-b′]dithiophene-2,7-diyl]bis[[4-[(2-ethylhexyl)oxy]-5,2-thiophenediyl]methylidyne(5,6-difluoro-3-oxo-1H-indene-2,1(3H)-diylidene)]]bis[propanedinitrile]. This process induces a well-ordered morphology of photoactive material, prevents damage to the underlying layer by suppressing the solvent penetration. Both photovoltaic cells and photodetectors prepared by the decal-coated photoactive layers containing fluorinated NFAs showed higher performance (power conversion efficiency = 10.69% and specific detectivity = 1.27 × 10¹² A cm Hz^1/2 W⁻¹, respectively) than those of cells prepared by the spin-coating method owing to morphology inversion and smoother interface that led to suppressed internal resistance and enhanced charge flow in normal structure. Thus, the reproducible decal-coating process using a customized elastomeric mediator is an important thin film coating technique for efficient next-generation organic optoelectronic materials.     

Effect of annealing-induced oxidation of molybdenum oxide on organic photovoltaic device performance

Molybdenum oxide (MoO_x) has been widely used as a hole transport layer in organic photovoltaic cells (OPVs), whose performance can be improved by inserting a MoO_x layer between an organic active layer and a transparent anode because of efficient carrier dissociation. In this study, the influence of thermally annealed MoO_x on the photovoltaic performance of OPVs was first investigated using low-bandgap polymer and [6,6]-phenyl C₇₁-butyric acid methyl ester (PC₇₁BM) blend films as the active layer. We used three low-bandgap polymers: poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b′]dithiophene)-alt-4,7(2,1,3-benzothiadiazole)] (PCPDTBT), poly(4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl) (PTB7), and poly([2,6′-4,8-di(5-ethylhexylthienyl)benzo[1,2-b,3,3-b]dithiophene]3-fluoro-2[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl) (PTB7-Th). Power conversion efficiencies were drastically increased for all investigated polymers when the as-deposited MoO_x layer was annealed at 160 °C for 5 min. In particular, a high efficiency of 6.57% was achieved when PTB7 was used; for comparison, the efficiency of a reference device with an as-deposited MoO_x layer (not subjected to annealing) was 1.40%. Specifically, the short-circuit current density and fill factor were remarkably improved after annealing, which means that efficient carrier dissociation was achieved in the active layer. We evaluated optical absorption and surface morphology to elucidate reasons behind the improved photovoltaic performance, and these parameters only slightly changed after annealing. In contrast, angle-dependent X-ray photoelectron spectroscopy revealed that the MoO_x layer was oxidized after annealing. In general, the oxygen vacancies of MoO_x act as carrier traps; a reduction in the number of carrier traps causes high hole mobility in the organic layer, which, in turn, results in an improved photovoltaic performance. Therefore, our results indicate that the annealing-induced oxidation of MoO_x is useful for achieving high photovoltaic performance.     

Morphology optimization of organic solar cells enabled by interface engineering of zinc oxide layer with a conjugated organic material

A diphenylphosphine-oxide-based conjugated organic molecule, ((1,3,5-triazine-2,4,6-triyl)tris(benzene-3,1-diyl))tris(diphenylphosphine oxide) (PO-T2T), was doped into ZnO to improve the characteristics of the electron transport layer (ETL) in inverted organic solar cells (OSCs). A series of characterization techniques were carried out to demonstrate the function of PO-T2T in film aspect, including transmittance, atomic force microscopy (AFM), transmission electron microscopy (TEM), water contact angle and grazing incidence wide angle X-ray scattering (GIWAXS). Light dependent, space-charge-limited current, exciton dissociation possibility were aimed to explore the influence of PO-T2T for internal carrier behaviors based on PTB7-Th: PC₇₁BM system. It's found that the PO-T2T doped ETLs played a role in morphology optimization of ETL and undermined the trap-assistant recombination through filling the defects ZnO itself had, simultaneously. Besides, the electron mobility was also improved. With the optimized functionalities, the OSCs' efficiency based on fullerene system Poly[4,8- bis(5-(2-Ethylhexyl)thiophen-2-yl) benzo [1,2-b:4,5-b′] dithiophene-co-3-fluorothieno [3,4-b] thiophene-2-carboxylate] (PTB7-Th): [6,6]-Phenyl C71 butyric acid methyl ester (PC₇₁BM) was improved from 9.03% to 9.84%. Finally, when this strategy was applied into another hot-topic system, poly((2,6-(4,8-bis(5-(2-ethylhexyl-3- fluoro)thiophen-2-yl)-benzo[1,2-b:4,5-b′]dithiophene))-alt-(5,5- (1′,3′-di-2-thienyl)-5′,7′-bis(2-ethylhexyl)benzo[1′,2′-c:4′,5′-c′] dithiophene-4,8-dione)) (PBDB-TF):2,2′-((2Z,2′Z)-((12,13-bis(2- ethylhexyl)-3,9-diundecyl-12,13-dihydro-[1,2,5]thiadiazolo[3,4-e] thieno[2,″3″:4′,5′]thieno[2′,3′:4,5]pyrrolo[3,2-g]thieno[2′,3′:4,5] thieno[3,2-b]indole-2,10-diyl)bis(methanylylidene))bis(5,6-difluoro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile (Y6), a high PCE of 16.34% was obtained. These results demonstrated that the PO-T2T had a positive role in OSC performance improvement.     

Acid-functionalized fullerenes used as interfacial layer materials in inverted polymer solar cells

Two types of carboxylic acid functionalized fullerence derivatives, 4-(2-ethylhexyloxy)-[6,6]-phenyl C₆₁-butyric acid (p-EHO-PCBA) and bis-4-(2-ethylhexyloxy)-[6,6]-phenyl C₆₁-butyric acid (bis-p-EHO-PCBA), were synthesized and investigated as an interfacial layer for inverted polymer solar cells (iPSCs). The –COOH groups on the PCBAs chemisorb to inorganic metal oxide (TiO_X), generating fullerene-based self-assembled monolayers (FSAMs). The devices with the mono- and bis-FSAMs exhibited substantially lower series resistance (R_S) values of 2.10 Ω cm² and 1.46 Ω cm², compared to that (4.15 Ω cm²) of the unmodified device. The TiO_X films modified with mono- and bis-FSAMs showed higher contact angles of 50° and 91°, respectively, than that of the pristine TiO_X film (33°). The increased contact angles were attributed to the enhanced hydrophobicity, improving the wetting properties with the organic photoactive layer. In addition, a comparison of device characteristics with electroactive FSAMs and non-electroactive benzoic acid SAMs clearly indicates that the FSAMs may suggest an additional pathway for photo-induced charge transfer and charge collection to ITO. After surface modification with FSAMs, the short-circuit current density (J_SC) and fill factor (FF) values increased substantially. The iPSCs based on poly(5,6-bis(octyloxy)-4-(thiophen-2-l)benzo[c][1,2,5]thiadiazole) (PTBT) and [6,6]phenyl-C₆₁-butyric acid methyl ester (PCBM) as an active layer showed remarkably improved power conversion efficiency up to 5.13% through incorporation of the FSAMs-based interfacial layer.     

Efficient semitransparent organic solar cells with good color perception and good color rendering by blade coating

This paper proposes high efficiency semitransparent organic solar cells (OSCs) with good color perception and good color rendering using blade coating technique. We investigate four different polymer blends and first fabricate small area devices with active area of 0.04 cm², followed by large area devices with active area of 10.8 cm². Two of the polymer blends, 2,6-Bis(trimethyltin)-4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b']dithiophene:6,6-phenyl C71-butyric acid methyl ester (PBDTTT-CT:PC₇₁BM) and poly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b;4,5-b′] dithiophene-2,6-diyl-alt-(4-(2-ethylhexyl)-3-fluorothieno[3,4-b]thiophene-)-2-carboxylate-2-6-diyl)]:PC₇₁BM (PBDTTT-EFT:PC₇₁BM) show promising results. For small area devices, semitransparent PBDTTT-CT:PC₇₁BM and semitransparent PBDTTT-EFT:PC₇₁BM achieve a power conversion efficiency (PCE) of 5.2% (opaque PCE = 7.5%) and 5.6% (opaque PCE = 9.4%) respectively. For large area devices, they are found to produce a PCE of 3.8% (opaque PCE = 4.2%) and 5.3% (opaque PCE = 5.9%) respectively. Based on the CIE 1931 chromaticity diagram, semitransparent PBDTTT-CT:PC₇₁BM and semitransparent PBDTTT-EFT:PC₇₁BM are located very close to the standard illuminant D65, indicating good color perception. As for color rendering, they demonstrate high color rendering index (CRI) of 95.4 and 87.1 respectively. These combined high performances indicate high-quality transmitted light, which is suitable for window application.     

An insight on oxide interlayer in organic solar cells: From light absorption and charge collection perspectives

A comprehensive study of the effect of oxide interlayer on the performance of bulk-heterojunction organic solar cells (OSCs), based on poly[[4,8-bis[(2-ethylhexyl)oxy] benzo [1,2-b:4,5-b'] dithiophene-2,6- diyl] [3-fluoro-2-[(2-ethylhexyl)carbonyl] thieno [3,4-b] thiophenediyl]] (PTB7): [6,6]-phenyl C71 butyric acid methyl ester (PC₇₀BM) blend system, is carried out by optical simulation, interfacial exciton dissociation and charge collection analyses. It is found that a PTB7:PC₇₀BM blend layer thickness optimized for maximum light absorption in OSCs does not generally give rise to the highest power conversion efficiency (PCE). OSCs, e.g., based on PTB7:PC₇₀BM blend system, can benefit from the oxide interlayer in two ways, (1) to enhance the built-in potential for reducing recombination loss of the photo-generated charges, and (2) to improve charge collection by removal of unfavorable interfacial exciton dissociation. The combined effects result in ∼20% improvement in PCE over an optimized control cell, having an identical layer configuration without an oxide interlayer.     

Enhancement of the power conversion efficiency due to the plasmonic resonant effect of Au nanoparticles in ZnO nanoripples

Au-ZnO nanoripples (NRs) were synthesized by using a sol-gel method for utilization as an electron transport layer (ETL) in inverted organic photovoltaic (OPV) cells. Absorption spectra showed that the plasmonic broadband light absorption of the ZnO NRs was increased due to the embedded Au nanoparticles (NPs). In particular, as compared to regular inverted OPV cells with a ZnO NR ETL, the incident photon-to-current efficiency of the inverted OPV cells with a Au-ZnO NR ETL was significantly enhanced due to the localized surface plasmon resonance (LSPR) effect of the Au NRs. The enhancement of the short-circuit current density (10.05 mA/cm²) of the inverted OPV cells with a Au-ZnO NR ETL was achieved by the insertion of the Au NPs into the ZnO NRs. The power conversion efficiency (PCE) of the OPV cells with Au-ZnO NRs was 3.25%. The PCE of the inverted OPV cells fabricated with a Au-ZnO NR ETL was significantly improved by 20.37% in comparison with that of inverted OPV cells fabricated with a ZnO NR ETL. This improvement can mainly be attributed to an increase in light absorption in the active layer due to the generation of the LSPR effect resulting from the existence of the Au NPs embedded in the ZnO NRs.     

Polyacetylene-based polyelectrolyte as a universal interfacial layer for efficient inverted polymer solar cells

Here we report that poly(N-dodecyl-2-ethynylpyridiniumbromide) (PDEPB) interlayers between electron-collecting zinc oxide (ZnO) layers and bulk heterojunction (BHJ) layers act as a universal interfacial layer for improving the performances of inverted-type polymer:fullerene solar cells. Three different BHJ layers, poly(3-hexylthiophene) (P3HT):[6,6]-phenyl-C₆₁-butyric acid methyl ester (PC₆₁BM), poly[(4,8-bis(2-ethylhexyloxy)-benzo[1,2-b:4,5-b']dithiophene)-2,6-diyl-alt-(N-2-ethylhexylthieno[3,4-c]pyrrole-4,6-dione)-2,6-diyl]] (PBDTTPD):PC₆₁BM, and poly[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]-thiophenediyl] (PTB7) and [6,6]-phenyl-C₇₁-butyric acid methyl ester (PC₇₁BM), were employed so as to prove the role of the PDEPB interlayers. Results showed that the power conversion efficiency (PCE) of polymer:fullerene solar cells with the three different BHJ layers increased in the presence of the PDEPB interlayers prepared from 0.5 mg/ml solutions. The improved PCE was attributed to the conformal coating of the PDEPB layers on the ZnO layers (by atomic force microscopy measurement), lowered work functions of ZnO induced by the PDEPB layers (by Kelvin probe measurement), and reduced interface resistance (by impedance spectroscopy measurement), as supported by the noticeable change in the atom environments of both the ZnO and PDEPB layers (by X-ray photoelectron spectroscopy measurement).     

Efficient inverted polymer solar cells incorporating doped organic electron transporting layer

An efficient inverted polymer solar cell is enabled by incorporating an n-type doped wide-gap organic electron transporting layer (ETL) between the indium tin oxide cathode and the photoactive layer for electron extraction. The ETL is formed by a thermal-deposited cesium carbonate-doped 4,7-diphenyl-1,10-phenanthroline (Cs₂CO₃:BPhen) layer. The cell response parameters critically depended on the doping concentration and film thickness of the Cs₂CO₃:BPhen ETL. Inverted polymer solar cell with an optimized Cs₂CO₃:BPhen ETL exhibits a power conversion efficiency of 4.12% as compared to 1.34% for the device with a pristine BPhen ETL. The enhanced performance in the inverted device is associated with the favorable energy level alignment between Cs₂CO₃:BPhen and the electron-acceptor material, as well as increased conductivity in the doped organic ETL for electron extraction. The method reported here provides a facile approach to optimize the performance of inverted polymer solar cells in terms of easy control of film morphology, chemical composition, conductivity at low processing temperature, as well as compatibility with fabrication on flexible substrates.     

Origin of high fill factor in polymer solar cells from semiconducting polymer with moderate charge carrier mobility

The fill factor of polymer bulk heterojunction solar cells (PSCs), which is mainly governed by the processes of charge carrier generation, recombination, transport and extraction, and the competition between them in the device, is one of the most important parameters that determine the power conversion efficiency of the device. We show that the fill factor of PSCs based on thieno[3,4-b]-thiophene/benzodithiophene (PTB7):[6,6]-phenyl C₇₁-butyric acid methylester (PC₇₁BM) blend that only have moderate carrier mobilities for hole and electron transport, can be enhanced to 76% by reducing the thickness of the photoactive layer. A drift–diffusion simulation study showed that reduced charge recombination loss is mainly responsible for the improvement of FF, as a result of manipulating spatial distribution of charge carrier in the photoactive layer. Furthermore, the reduction of the active layer thickness also leads to enhanced built-in electric field across the active layer, therefore can facilitate efficient charge carrier transport and extraction. Finally, the dependence of FF on charge carrier mobility and transport balance is also investigated theoretically, revealing that an ultrahigh FF of 80–82% is feasible if the charge mobility is high enough (∼10⁻³–10⁻¹ cm²/V s).