共查询到20条相似文献,搜索用时 390 毫秒
1.
2.
3.
4.
5.
6.
7.
8.
咖啡机顶盖铝合金压铸模具的热疲劳分析 总被引:2,自引:1,他引:1
采用PROCAST软件,对铝合金压铸成形工艺进行数值模拟,得到压铸过程中模具的温度场、应力场及模具的热疲劳分布云图。选取实际生产中容易出现热疲劳的两个工艺特征区进行了模拟结果分析,对比研究了"T"型浇注系统和"梳"型浇注系统,得出"梳"型浇注系统为该铸件较佳的浇注系统,验证了该优化设计对减少模具的热疲劳、提高模具使用寿命的可行性。 相似文献
9.
根据高职模具专业教育培养目标的要求,利用信息技术、多媒体教学系统为平台,将仿真软件或多媒体课件教学与塑压设备实训教学融为一体,提高了模具专业学生的专业素质,推动了高职模具专业的教学改革。 相似文献
10.
11.
12.
13.
碳钢表面氮化钛陶瓷化研究 总被引:3,自引:0,他引:3
介绍了一种在Q235钢表面,利用等离子溅射直接复合渗镀合成氮化钛新工艺方法。该渗镀层包括钢基体上均匀分布细小氮化钛颗粒的渗层和表面氮化钛沉积层。沉积层与基体为冶金结合,不会产生剥落。渗镀层表面硬度在1600~3400HV之间。X射线衍射结果表明,表面为纯氮化钛层,(200)晶面的衍射峰最强,具有明显的择尤取向。用划痕仪进行结合强度检测,声发射曲线未见突起的信号峰值,表明结合强度良好。复合渗镀氮化钛试样在10%硫酸、5%盐酸、3.5%氯化钠水溶液和硫化氢富液中进行腐蚀试验,耐腐蚀性能分别比改性前提高了84、11.67、1.15、21.15倍。 相似文献
14.
为适应柔性化制造的发展趋势,提出一种基于可编程片上系统的机床数控系统设计方案,使得数控系统可以按需重构。给出了嵌入式数控系统的总体硬件设计;说明了可编程片上系统(SOPC)的内部架构和Nios II软核处理器具体配置,实现了MCU、DSP和用户逻辑在一片FPGA芯片上的集成;设计了数控系统的重构方案并在EP2C50芯片上进行了重构实验,结果表明:整个重构周期耗时748 ms,能满足数控机床使用中的现场实时重构要求。 相似文献
15.
16.
本文以钣金折弯件为研究对象,提出了一种以知识库为基础,以推理机为核心来获取弯曲件折弯工序的方法。采用面向对象技术表示实例,创建了实例知识库。利用基于案例的推理(CBR)方法获取目标零件的折弯工序。该方法能够充分利用实例加工知识,减少了试折弯次数,从而提高了折弯工艺知识的利用率和折弯件的加工效率。 相似文献
17.
Ce-Zr compounds such as Ce0.68Zr0.32O2 solid solution, Ce/Zr nitrate and CeO2/ZrO2 were added into γ-alumina-based slurries, which were then loaded on FeCrAl foils pretreated at 950℃ and 1100℃. The microstructures and adhesion performance between the substrates and the washcoats were measured by SEM, BET surface area, ultrasonic vibration and thermal shock test. The results show that the addition of Ce0.68Zr0.32O2 solid solution, Ce/Zr nitrate and CeO2/ZrO2 into the slurries can improve γ-Al2O3-based washcoat adhesion on FeCrAl foils. Furthermore, ceria-zirconia solid solution increases the adhesion of the washcoat on the surface of an FeCrAl foil than the two others. The specific surface area of this washcoat remains about 43-45 m2/g and the weight loss is below 4.0% even after aging test of 10%steam-containing air at 1050℃ for 20 h. 相似文献
18.
The effect of hexadecylamine (HDA) on a Chromate phosphate coating on aluminium was studied using an optimized Chromate phosphate bath, The addition of HDA was found to decrease the coating weight, but to enhance the coating quality and corrosion resistance. The inhibitory effect of HDA helps in regulating the excessive attack on the metal and its ability to reduce Cr6+ to Cr3+ compensates the possible time delay for the initiation of coating deposition due to the inhibition. 相似文献
19.