共查询到20条相似文献,搜索用时 125 毫秒
1.
刨花板生产线运输板坯的金属网带产生的网带压痕是影响刨花板产品质量的一个重要因素。本文着重探讨改变金属网带的焊接材料、焊接方式以及采取有效的补救措施,可以有效地降低网带压痕,提高刨花板产品质量 相似文献
2.
采用进口刨花板铺装网带与国产铺装网带的经济效益分析海南省农垦三亚木材厂陈图瑛刨花板铺装时,要求拌胶刨花铺成的板坯很均匀,压出的刨花板厚度才能一致,因此刨花板的质量决定于铺装刨花板坯的质量,而铺装刨花板坯的质量,首先是取决于铺装网带的质量。质量好的铺装... 相似文献
3.
BeltoHanskarger 《产业用纺织品》2002,20(7):16-21
介绍了塑胶网带的用途和网带的种类 (玻璃纤维网带、金属网带和塑胶网带 )及其优缺点 ,并对网带的透风率、网带清理及网带收缩等问题进行了讨论 相似文献
4.
介绍了定向刨花板生产用滚筒式单通道中/高温烟气刨花干燥机和网带式低温刨花干燥机的简单结构,并且根据作者的生产实践,提出了刨花干燥机选型的建议。 相似文献
5.
德国Bison公司刨花板设备的特点是渐变结构单层平压法,其中在刨花板成形时的输送又有采用钢带和网带之分.我厂于八十年代初引进了该公司年产三万立方米的刨花板生产线,其铺装和热压采用一条钢带运输机.钢带的长×宽×厚为:85745×2595×1.2mm,装到运输机上焊成环形,并且由 相似文献
6.
ErnstReinhardt 《产业用纺织品》2005,23(3):16-22
对生产打褶过滤介质的机械打褶机和电子打褶机进行比较。重点介绍了Rabofsky公司电子刀形打褶机对提高打褶过滤介质经济效益和过滤效率的作用。 相似文献
7.
指出现有纬编花型设计系统在打褶工艺设计方面存在的问题,介绍打褶的位置关系和打褶工艺原理,研究褶裥形态及相关参数之间的关系,设计一种简易的打褶工艺设计系统。介绍该系统定制打褶工艺规格设计模块和绘制打褶示意图模块的操作程序。该系统可以模拟打褶织物的编织效果图,还可以根据设计效果生成工艺参数,编织前可以合理选择总针数、收针数、褶间距、打褶个数,使打褶织物达到更加美观的效果,提高设计效率。 相似文献
8.
9.
10.
11.
柠条特性与刨花板生产工艺的关系 总被引:5,自引:0,他引:5
论述了柠条特性对柠条刨花板生产工艺的影响,并根据分析结果探讨了柠条刨花板的生产工艺特点,测试了柠条刨花板的物理力学性质,提出了改善刨花板性能的措施。 相似文献
12.
13.
14.
结合我国刨花板生产原料的特点,提出选用气流分选设备去除泥沙、碎石、玻璃、金属、树皮等杂物,以提高刨花板质量。 相似文献
15.
16.
For several wood-based materials (plywood, OSB, melamine faced board (MFB), particle board and fibre board), the thermal conductivity was determined as a function of the temperature (ranging between 10 and 30 °C) and also the moisture content (from an oven-dry sample up to a moisture content at 80% RH). Furthermore, the water vapour resistance factor of these materials as well as of the coating (at MFB) and the diffusion coefficient were determined under dry cup (performance at low humidity dominated by vapour diffusion) and wet cup (performance at high humidity with liquid water and vapour transport) conditions. Thermal conductivity increases with rising temperature, moisture content and density. Moreover, a clear decrease of thermal conductivity was found with decreasing particle size at the same density level, from solid wood over plywood and particle board to fibre board. The water vapour resistance factor of the wood-based materials increases with rising density and decreases with increasing moisture content. An influence of the particle and fibre board thickness was also revealed. In contrast to the remaining materials, an increase of the water vapour resistance factor with increasing moisture content was measured for the coating. The diffusion coefficient decreases with rising density and moisture content. 相似文献
17.
本文研究了MDF生产中产生的碎料、废纤维等原料用于制造碎料板的工艺条件,并分析了不同条件对碎料板性能的影响。 相似文献
18.
C. v. Bismarck 《Holz als Roh- und Werkstoff》1979,37(1):9-15
To evaluate the suitability of particle board for lacquering, 12 different surface properties of 17 industrially produced particle boards, as well as the respective testing methods were investigated. Some new and unconventional methods were applied, such as the indication of the pore percentage by the “bearing portion”, measured by means of a special roughness tester, and the determination of the board density by gamma radiation. After industrial application by scraper priming, sanding and curtain coating, the test specimens were subjected to climatic cycling (storing in standard (20 65) and humid climatel. Only after this treatment the changes in the gross-board-shape and their refation to the board type became obvious. The range of these changes, between the two states of moisture content, could possibly be taken as a criterion to determine the suitability of a certain particle board for a special type of coating. 相似文献
19.
In this study the orthotropic properties in the core layer of wood based panels are analyzed by means of the newly developed double cantilever I beam testing system. Four different wood based panels (i.e., OSB, particle board, particle board containing recycling chips and MDF) were tested in-plane, in longitudinal and lateral orientation. Specific fracture energy numbers yielded significant differences between the longitudinal and the lateral orientation for OSB, while the stress intensity factor analysis showed significant differences for OSB and particle board containing recycling particles. 相似文献
20.
H. Poblete 《Holz als Roh- und Werkstoff》1992,50(10):392-394
The influence of Chilean wood species and mixtures of the same species on particleboard properties was studied. Species and mixture ratio had a great influence on board properties. It was also determined that bending strength and internal bond of particle board from wood mixtures can be calculated using the recorded strength of particle boards based on single wood species. 相似文献