Defective layered NiFe double hydroxides anchored on self-supported CoNi-nitrogen doped carbon nanotube composite as advanced electrocatalyst for oxygen evolution reaction

Oxygen evolution reaction (OER) is an essential process during electrochemical water-splitting. Due to its sluggish kinetics, low cost and highly efficient catalyst is invariably desired to decrease its overpotential for large-scale application. However, the overpotential of most advanced OER electrocatalysts is still more than 200 mV at the current density of 10 mA cm^?2. In this work, we constructed active layered NiFe double hydroxides with cation defects on self-supported three-dimensional (3D) CoNi nitrogen-doped carbon nanotube composite substrate as integrated OER catalyst. Strikingly, electrochemical measurements showed that the optimized sample exhibited outstanding OER activity with low overpotentials of 178 and 268 mV at the current densities of 10 and 100 mA cm^?2 in alkaline environment, alongside a good durability. The excellent OER performance was ascribed to the strongly synergistic effect of intrinsically active NiFe double hydroxide layers with abundant cation vacancies and 3D carbon nanotube composite substrate with good conductivity and various functional moieties, thus facilitating the electrocatalytic kinetic.     

FeOOH–CoS composite catalyst with high catalytic performances for oxygen evolution reaction at high current density

Water electrolysis is an efficient approach for high-purity hydrogen production. However, the anodic sluggish oxygen evolution reaction (OER) always needs high overpotential and thus brings about superfluous electricity cost of water electrolysis. Therefore, exploiting highly efficient OER electrocatalysts with small overpotential especially at high current density will undoubtedly boost the development of industrial water electrolysis. Herein, we used a simple hydrothermal method to prepare a novel FeOOH–CoS nanocomposite on nickel foam (NF). The as-prepared FeOOH–CoS/NF catalyst displays an excellent OER performance with extremely low overpotentials of 306 and 329 mV at 500 and 1000 mA cm⁻² in 1.0 M KOH, respectively. In addition, the FeOOH–CoS/NF catalyst can maintain excellent catalytic stability for more than 50 h, and the OER catalytic activity shows almost no attenuation no matter after 1000 repeated CV cycles or 50 h of stability test. The high catalytic activity and stability have exceeded most non-noble metal electrocatalysts reported in literature, which makes the FeOOH–CoS/NF composite catalyst have promising applications in the industrial water electrolysis.     

Electrodeposition of NiFe layered double hydroxide on Ni3S2 nanosheets for efficient electrocatalytic water oxidation

The oxygen evolution reaction (OER) plays a vital role in various energy conversion applications. Up to now, the highly efficient OER catalysts are mostly based on noble metals, such as Ir- and Ru-based catalysts. Thus, it is extremely urgent to explore the non-precious electrocatalysts with great OER performance. Herein, a simple electrodeposition combined with hydrothermal method is applied to synthesize a non-precious OER catalyst with a three-dimensional (3D) core-shell like structure and excellent OER performance. In our work, NiFe layered double hydroxide (LDH) was electrodeposited on Ni₃S₂ nanosheets on nickel foam (NF), which exhibits a better performance compared with RuO₂, and a low overpotential of 200 mV is needed to reach the current density of 10 mA/cm² in 1 M KOH. Notably, the Ni₃S₂/NiFe LDH only need an overpotential of 273 mV to reach the current density of 200 mA/cm².     

Three-dimensional hierarchically porous iridium oxide-nitrogen doped carbon hybrid: An efficient bifunctional catalyst for oxygen evolution and hydrogen evolution reaction in acid

Active and durable acid medium electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are of critical importance for the development of proton exchange membrane (PEM) water electrolyser or Fuel cells. Herein, we report a facile method for the synthesis of 3D-hierarchical porous iridium oxide/N-doped carbon hybrid (3D-IrO₂/N@C) and its superior OER and HER activity in acid. In 0.5 M HClO₄, this catalyst exhibited remarkable activity towards OER with a low overpotential of 280 mV at 10 mA/cm² current density, a low Tafel slope of 45 mV/dec and ∼98% faradaic efficiency. The mass activity (MA) and turnover frequency (TOF) are found to be 833 mA/mg and 0.432 s⁻¹ at overpotential of 350 mV which are ∼32 times higher than commercial (comm.) IrO₂. The HER performance of this 3D-IrO₂/N@C is comparable with comm. Pt/C catalyst in acid. This 3D-IrO₂/N@C catalyst requires only 35 mV overpotential to reach a current density 10 mA/cm² with Tafel slope 31 mV/dec. Most importantly, chronoamperometric stability test confirmed superior stability of this catalyst towards HER and OER in acid. This 3D-IrO₂/N@C catalyst was applied as both cathode and anode for over-all water splitting and required only 1.55 V overpotential to achieve a current density of 10 mA/cm² in acid. The outstanding activity of the 3D-IrO₂/N@C catalyst can be attributed to a unique hierarchical porous network, high surface area, higher electron and mass transportation, synergistic interaction between IrO₂ and carbon support.     

Optimized performance of nickel in crystal-layered arrangement of NiFe2O4/rGO hybrid for high-performance oxygen evolution reaction

To rescue the future from the global energy crisis and to ensure it with clean and economical hydrogen energy, it is an urgency to develop an efficient OER catalyst, which intensely sluggish the kinetic process of hydrogen production. Herein, we have precisely synthesized an efficient, stable, earth-abundant metal-based NiFe₂O₄/rGO hybrid OER electrocatalysts by a simple solvothermal method. The measurements including XRD, FTIR, XPS, EDS, SEM, and TEM revealed the prominent structural integrity of catalyst with crystal-layered structure. The rich oxidation chemistry of transition metals and substantially active carbon substrate allows tuning of their electronic properties concerning their concentration, composition, and morphology. The effect of different Ni wt.% (0%, 2%, 4%, and 6%) on the morphology of hybrid as well as on electrochemical performance investigated. The protocols like overpotential required to achieve a current density of 10 mA/cm², Tafel slope, ECSA, RF, EIS, stability was utilized to examine the overall abilities of electrocatalyst in alkaline 1 M KOH solution. The optimized NiFe₂O₄/rGO hybrid with 2 wt % Ni exhibited the excellent OER performance, which delivers a current density of 10 mA/cm² at an overpotential of only 302 mV with a small Tafel slope of 63 mV/dec. The high activity of the catalyst is attributed to the synergistic effect of the crystal-layered structure as well as rapid mass-charge transfer. Such, rational design concept of anchoring non-precious metal on carbon in a controlled manner, offering splendid flexibility to tailor electrochemical OER performance. The optimized variations in metal concentration and morphologies, providing a promising route to develop a cost-effective catalyst for advanced energy conversion applications.     

Electrodeposition of Ni–Fe micro/nano urchin-like structure as an efficient electrocatalyst for overall water splitting

The usage of active electrocatalysts is a useful approach to accelerate the kinetics of electrochemical reactions and to enhance the efficiency of water splitting. To fabricate active electrocatalysts, the creation of new structures that can be easily constructed has always been a research interest. Ni–Fe based alloys are generally known as active OER catalyst. However, in this study, a novel Ni–Fe micro/nano urchin-like structure is reported to be active for both HER and OER. This is the first report of the fabrication of this morphology by a fast, one-step, and affordable electrodeposition method as an efficient HER/OER electrocatalyst. The optimized Ni–Fe coating on Cu substrate demonstrated promising HER activity with low overpotentials of ?124 and ?243 mV at the current densities of ?10 and ?100 mA cm^?2, respectively. Moreover, the fabricated Ni–Fe urchin-like catalyst is highly active toward OER, requiring overpotentials of only 292 and 374 mV to deliver 10 and 100 mA cm^?2. The unique structure of the synthesized coating with an abundant number of micro/nano-scale cones is suggested to play a vital role in the superior HER/OER activity of the catalyst. This article introduces a cost-effective method for the fabrication of a novel urchin-like Ni–Fe alloy as a highly active bifunctional water splitting electrocatalyst.     

Boosting the kinetics of oxygen and hydrogen evolution in alkaline water splitting using nickel ferrite /N-graphene nanocomposite as a bifunctional electrocatalyst

Design, synthesize and application of metal-oxide based bifunctional electrocatalysts with sustainability and efficient activity in water splitting is significant among the wide spread researches in energy applications. Herein, bifunctional electrocatalysts composed of NiFe₂O₄ dispersed on N-doped graphene has been prepared by in-situ polymerization and characterized for further bifunctional catalytic performances. The electrocatalyst exhibited bespoken performances as cathode in HER as well as anode in OER at alkaline electrolyte. The nanocomposite N-doped graphene/NiFe₂O₄ (NGNF) exhibited low overpotential of 184 mV in HER and 340 mV in OER for attaining the current density of 10 mA/cm² which is far better than their pristine counterparts. Similarly its Tafel slopes were found to be 82.9 mV/dec and 93.2 mV/dec for HER and OER. As an electrocatalyst NGNF outperformed pure nickel ferrite and graphene/NiFe₂O₄ (GNF) as bifunctional electrocatalyst with low overpotential and Tafel slopes. This indicates the impact of graphene and N-doping on graphene in the activity of pure NF. The graphene in the composite and the N-dopants provoked the catalytic activity and tuned the electron transfer and interaction with the electrolyte. Thus, herein we endow with strategies of preparing highly efficient bifunctional electrocatalysts by coupling spinel oxides and N-doped graphene for HER and OER.     

In-situ self-reconstruction of Ni–Fe–Al hybrid phosphides nanosheet arrays enables efficient oxygen evolution in alkaline

Developing efficient oxygen evolution reaction (OER) electrocatalysts with earth-abundant elements is very important for sustainable H₂ generation via electrochemical water splitting. Here we design a crystalline-amorphous Ni–Fe–Al hybrid phosphides nanosheet arrays grown on NiFe foam for efficient OER application. Dynamic surface reorganization of phosphides at anodic/cathodic polarizations is probed by in situ Raman spectroscopy. The reconstructed amorphous Ni(Fe)OOH species are determined as the active phases that facilitate the OER process. This unique electrode shows highly catalytic activity toward water oxidation, achieving the current densities of 10 and 100 mA cm^?2 at 181 and 214 mV in 1 M KOH, respectively. Meanwhile, it also exhibits excellent stability at a large current density of 100 mA cm^?2 for over 60 h. This work reveals the dynamic structural transformation of pre-catalyst in realistic conditions and highlights the important role of oxyhydroxides as real reactive species in OER process with high activity.     

Electroless deposition synthesis of composite catalysts Ni-Fe-P-WO3/NF with superior oxygen evolution performance

The proper construction of high efficiency, low-cost, earth-abundant oxygen evolution reaction (OER) catalyst is essential for hydrogen formation by water splitting. A novel electrocatalyst with highly active OER performance was manufactured by a simple electroless deposition method of Ni-Fe-P-WO₃ on nickel foam (NF). Benefiting from outstanding mass transfer capability of Ni-Fe-P-WO₃/NF heterogeneous structure, abundance of active sites in the amorphous architecture and etc., the Ni-Fe-P-WO₃/NF shows extremely superb electrocatalytic properties compare to noble metal catalyst IrO₂/NF for OER, which needs an overpotential of only 218 mV in 1.0 M KOH solution to achieve the current density of 10 mA cm^?2. It also has remarkable OER activity at high current density that only needs 298 mV to attain 100 mA cm^?2 current density. Moreover, the Ni-Fe-P-WO₃/NF has low Tafel slope of 42 mV dec^?1. This study offers a novel approach to the production of OER multiphase electrocatalysts from oxides and alloys.     

Coordination confinement pyrolysis to hollow sea urchin shaped composite with embedded ultrasmall Co/Ni alloy for overall water splitting

Electrocatalytic water splitting has been extensively studied for producing clean fuels in energy conversion and utilization. However, the huge challenge is remaining existence for developing efficient and low-cost non-noble metal electrocatalysts. Herein, an efficient hollow sea urchin-shaped water-splitting catalyst was prepared by coordination confinement pyrolysis strategy, in which the superminiature Co/Ni alloy (ca. 5 nm) was embedded into the nanorods assembly unit successfully. This as-synthesized catalyst not only reveals satisfactory catalytic efficiencies with 70 and 296 mV overpotentials for HER and OER at the current density of 10  mA cm^?2, but also demonstrates the total stabilities for HER, OER, and over water splitting after long-term electrolytic process with the negligible potentials increase by 2.8%, 2.9%, and 1.8%. Therefore, the catalyst integrates the advantages of superminiature Co/Ni alloy particles, hollow structure, and slender nanorods, which could provide a new route to design and prepare other efficient electrocatalysts.     

Zn-substituted MnCo2O4 nanostructure anchored over rGO for boosting the electrocatalytic performance towards methanol oxidation and oxygen evolution reaction (OER)

Mixed valence spinel oxides have emerged as an attractive and inexpensive anode electrocatalyst for water oxidation to replace noble metals based electrocatalysts. The present work demonstrates the facile synthesis of Zn substituted MnCo₂O₄ supported on 3D graphene prepared by simple hydrothermal technique and its application as an electrocatalyst for water oxidation and methanol oxidation. The physico-chemical properties of the nanocatalyst were studied using various microscopic, spectroscopic and diffraction analyses confirming the formation of the composite. The electrocatalytic performance of the prepared electrocatalyst was evaluated using potentiodynamic, potentiostatic and impedance techniques. The synthesized Zn_1-xMn_xCo₂O₄/rGO electrocatalyst with x = 0.2 and 0.4 offered the same onset potential and overpotential at 10 mA/cm². However, catalyst x = 0.4 delivered a higher current density indicating the superiority of the same over other compositions which is attributed to better kinetics that it possessed for OER as revealed by the smallest Tafel slope (80.6 mV dec⁻¹). The prepared electrocatalysts were tested for methanol oxidation in which electrocatalyst Zn_1-xMn_xCo₂O₄/rGO with x = 0.4 shows a better electrochemical performance in oxidizing methanol with the higher current density of 142.3 mA/cm². The above catalyst also revealed excellent stability and durability during both MOR and OER, suggesting that it can be utilized in practical applications.     

MoS2/NiFeS2 heterostructure as a highly efficient electrocatalyst for overall water splitting at high current densities

Searching for efficient, stable and low-cost nonprecious catalysts for oxygen and hydrogen evolution reactions (OER and HER) is highly desired in overall water splitting (OWS). Herein, presented is a nickel foam (NF)-supported MoS₂/NiFeS₂ heterostructure, as an efficient electrocatalyst for OER, HER and OWS. The MoS₂/NiFeS₂/NF catalyst achieves a 500 mA cm⁻² current density at a small overpotential of 303 mV for OER, and 228 mV for HER. Assembled as an electrolyzer for OWS, such a MoS₂/NiFeS₂/NF heterostructure catalyst shows a quite low cell voltage (≈1.79 V) at 500 mA cm⁻², which is among the best values of current non-noble metal electrocatalysts. Even at the extremely large current density of 1000 mA cm⁻², the MoS₂/NiFeS₂/NF catalyst presents low overpotentials of 314 and 253 mV for OER and HER, respectively. Furthermore, MoS₂/NiFeS₂/NF shows a ceaseless durability over 25 h with almost no change in the cell voltage. The superior catalytic activity and stability at large current densities (>500 mA cm⁻²) far exceed the benchmark RuO₂ and Pt/C catalysts. This work sheds a new light on the development of highly active and stable nonprecious electrocatalysts for industrial water electrolysis.     

Nickel foam-supported Fe,Ni-Polyporphyrin microparticles: Efficient bifunctional catalysts for overall water splitting in alkaline media

Developing highly active, stable and sustainable electrocatalysts for overall water splitting is of great importance to generate renewable H₂ for fuel cells. Herein, we report the synthesis of electrocatalytically active, nickel foam-supported, spherical core-shell Fe-poly(tetraphenylporphyrin)/Ni-poly(tetraphenylporphyrin) microparticles (FeTPP@NiTPP/NF). We also show that FeTPP@NiTPP/NF exhibits efficient bifunctional electrocatalytic properties toward both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). Electrochemical tests in KOH solution (1 M) reveal that FeTPP@NiTPP/NF electrocatalyzes the OER with 100 mA cm⁻² at an overpotential of 302 mV and the HER with 10 mA cm⁻² at an overpotential of 170 mV. Notably also, its catalytic performance for OER is better than that of RuO₂, the benchmark OER catalyst. Although its catalytic activity for HER is slightly lower than that of Pt/C (the benchmark HER electrocatalyst), it shows greater stability than the latter during the reaction. The material also exhibits electrocatalytic activity for overall water splitting reaction at a current density of 10 mA cm⁻² with a cell voltage of 1.58 V, along with a good recovery property. Additionally, the work demonstrates a new synthetic strategy to an efficient, noble metal-free-coordinated covalent organic framework (COF)-based, bifunctional electrocatalyst for water splitting.     

Three-dimensional Ni/Fe doped graphene oxide @ MXene architecture as an efficient water splitting electrocatalyst

Developing a highly efficient, stable, and earth-abundant electrocatalyst for both HER and OER is essential for water splitting. Herein, we report a bifunctional electrocatalyst in the form of iron/nickel doped graphene oxide @ MXene (GMX). The GMX-based electrocatalytic materials were prepared by annealing at different temperatures in an inert atmosphere. The GMX was characterized by various analytical tools such as PXRD, FE-SEM, HRTEM, Raman spectroscopy, and XPS. All the electrocatalysts exhibit high activity when acting as OER and HER catalyst in alkaline and acidic electrolytes. GMX-500 is considered an effective bifunctional electrocatalyst, and 10 mA cm^?2 current density is achieved at a low overpotential, i.e., 370 mV for OER and 470 mV for HER, respectively. This paper focuses on the progress of inexpensive and effective electrocatalysts with high activity and long-term durability for water splitting, which is relevant in power conservation.     

Microwave rapid hydrolysis induced two-dimensional NiFeSe nanosheets for efficient oxygen evolution reaction

The key to the development of renewable energy is to search a cheap and efficient non-precious metal based oxygen evolution reaction (OER) electrocatalyst. The NiFe-based catalyst showed excellent catalytic properties. Herein, nickel-iron selenide (m-NiFeSe) with a two-dimensional nanosheet structure was prepared by using the nickel foam as the substrate and the electrodeposition-microwave rapid hydrolysis method. The presence of microwave not only changes the microscopic morphology, forms a new catalytic interface, increases the active area, but also appears mixed valence states of nickel (Ni²⁺/Ni³⁺) and high valence states of selenium, which makes the catalyst possess excellent basic OER electrocatalytic performance. In addition, the synergistic effect between nickel metal and iron metal is also one of the reasons for the improved property. Finally, the microwave-assisted catalysts reached electric current densities of 10 and 100 mA·cm⁻² at overpotentials of 128 and 291 mV, separately, and had good durability in the chronopotentiometry test at a current density of 100 mA·cm⁻² for 18 h. The purpose of this study is to provide a simple and feasible method for the preparation of inexpensive and high-efficiency OER electrocatalysts.     

N/C doped nano-size IrO2 catalyst of high activity and stability in proton exchange membrane water electrolysis

It is highly desirable to synthesize and deploy low-cost and highly efficient catalysts for the oxygen evolution reaction (OER) to catalyze water splitting. We show that N/C doped amorphous iridium oxide combines the benefits of nano-size (approximately 2 nm), which results in exposure to large active surface areas and features of oxygen defects, which make for an electronic structure suitable for the OER. Systematic studies indicate that the OER activity of the iridium oxide catalyst is accelerated by the effect of the structure and chemical state of the iridium element. Remarkably, the N/C doped amorphous iridium oxide catalyst shows a lower cell voltage of 1.774 V at 1.5 A cm⁻², compared with IrO₂ (1.847 V at 1.5 A cm⁻²), and it can maintain such a high current density for over 200 h without noticeable performance deterioration. This work provides a promising method for the improving OER electrocatalysts and the construction of an efficient and stable PEM water cracking system.     

Tailor-designed bimetallic Co/Ni macroporous electrocatalyst for efficient glycerol oxidation and water electrolysis

Water electrolysis is broadly considered one of the most promising technologies for green hydrogen production. However, the oxygen evolution reaction (OER) is thermodynamically unfavorable and requires large overpotentials to proceed with an adequate rate. Herein, we introduce key structural and compositional parameters controlling the hydrogen evolution reaction (HER) performance of a representative family of bimetallic CoNi porous electrocatalysts and highlight a simple strategy for replacing the OER with glycerol oxidation reaction (GOR) to reduce the input cell voltage. The structural, morphological, and electrochemical characterizations of a series of electrocatalysts, prepared by the dynamic hydrogen bubble template technique (DHBT), were fully studied which reveals that changing of Co: Ni ratio affects HER activity. Optimization of this ratio leads to enhancement in both intrinsic and mass activity besides the high density of accessible active sites. This, in turn, leads to an efficient electrocatalyst achieving a low overpotential of ?67 mV at a current density of 10 mA/cm² during HER. As a bifunctional electrocatalyst, it requires only 1.65 V to deliver the same current density with excellent stability for more than 20 h of continuous water electrolysis in alkaline medium. Moreover, the input cell voltage drops by at least 0.2 V during glycerol electrolysis with concurrent production of both hydrogen and value-added chemicals especially hydroxy pyruvate ion.     

Additively manufactured 316L stainless steel: An efficient electrocatalyst

In the quest of finding an economical, yet efficient material, the idea of fabricating 316L stainless steel using additive manufacturing technology was explored to produce material with refined sub-granular structure. The surface of the stainless steel was further chemically treated with an etching solution to expose the grain boundaries. The grain boundary enriched surface resulted in more active sites for the oxygen evolution reaction (OER) in additively manufactured treated (AM-T) 316L stainless steel. AM-T sample manifests enhanced catalytic activity for OER with an overpotential of 310 mV to draw a 10 mA/cm² current density, along with a lower Tafel slope of 42 mV/dec compared to AM and wrought samples. These features were validated from the increased double-layer capacitance of AM-T and approximately 1.5 times larger electrochemically effective surface area of AM-T due to etching treatment compared to the wrought sample. Furthermore, AM-T also possesses stable activity retention for 100 h at a current density of 10 mA/cm².     

Bifunctional nanoporous ruthenium-nickel alloy nanowire electrocatalysts towards oxygen/hydrogen evolution reaction

A class of ruthenium-nickel alloy catalysts featured with nanoporous nanowires (NPNWs) were synthesized by a strategy combining rapid solidification with two-step dealloying. RuNi NPNWs exhibit excellent electrocatalytic activity and stability for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in which the RuNi-2500 NPNWs catalyst shows an OER overpotential of 327 mV to deliver a current density of 10 mA cm^?2 and the RuNi-0 NPNWs catalyst requires the overpotential of 69 mV at 10 mA cm^?2 showing the best HER activity in alkaline media. Moreover, the RuNi-1500 NPNWs catalyst was used as the bifunctional electrocatalyst in a two-electrode alkaline electrolyzer for water splitting, which exhibits a low cell voltage of 1.553 V and a long-term stability of 24 h at 10 mA cm^?2, demonstrating that the RuNi NPNWs catalysts can be considered as promising bifunctional alkaline electrocatalysts.     

Aerosol-assisted chemical vapor deposition of nickel sulfide nanowires for electrochemical water oxidation

Slow kinetics and emotive design of electrocatalysts are the main barriers to effective oxygen evolution and hydrogen production from water. To overcome these challenges, nickel sulfide impregnated electrocatalysts with auxiliary structural features have recently attracted attention as effective alternatives for the oxygen evolution reaction (OER). Herein, nickel sulfide (NiS) nanowires are developed directly on nickel foam (NF), which have proven to be a highly efficient electrocatalyst for OER in an alkaline medium. For this, NiS nanowires were grown on NF for short intervals of 30, 60, 90 and 120 min through an aerosol-assisted chemical vapor deposition (AACVD) process using nickel diethyldithiocarbamate as a precursor. The as-developed NiS electrode showed excellent OER activity in 1.0 M KOH solution. It is noteworthy that the NiS electrode produced after 90 min provides a reference current density of 10 mA cm^?2 at an overpotential (η) of 210 mV and achieves a higher current density of 500 mA cm^?2 at an overpotential of 340 mV. Moreover, the nanocatalyst has observed a low Tafel value (60 mV dec^?1) and good OER stability. After the electrolysis, it was found that the surface of the NiS catalyst was partially modified into nickel oxide. The S atom in the NiS catalyst can provide an activator function that first converts the sulfide to a hydroxide and then eventually becomes an oxyhydroxide species. The more active nickel hydroxide/oxyhydroxide phase raises the water oxidation performance to a new level. The facile synthesis of NiS nanowire films by AACVD tends to be used as an anodic material in various other power generation and energy conversion devices such as batteries, fuel cells, and supercapacitors.