An effective strategy to enhance the performance of the proton exchange membranes based on sulfonated poly(ether ether ketone)s

We report an effective and facile approach to enhance the dimensional and chemical stability of sulfonated poly(ether ether ketone) (SPEEK) type proton exchange membranes through simple polymer blending for fuel cell applications, using commercial available materials. The polymeric blends with sulfonated poly(aryl ether sulfone)s (SPAES) were simply fabricated by a three-component system, which contained SPEEK (10–50 wt%, 1.83 mmol/g), and SPAES-40 (1.72 mmol/g)/SPAES-50 (2.04 mmol/g) at 1:1 in weight. The SPAES-40 was selected for mechanical and dimensional stability reinforcing, while SPAES-50 for the good polymer compatibility. The obtained SPEEK/SPAES blend membranes showed depressed water uptake, better dimensional and oxidative stability, together with higher proton conductivity beyond 70 °C than the pristine SPEEK membrane. The apparent improvements in membrane properties were associated with the homogeneous dispersion of SPEEK and both SPAES copolymers inside the membranes as well as the rearrangements of the polymeric chains. The SPEEK content should be properly controlled in the range of 10–40% (B10 to B40). In a H₂/O₂ fuel cell test, B30 showed a maximum power density of 700 mW/cm², which was 1.6 times as high as that of B40 at 80 °C under 100% RH. The further cross-linking treatment produced more ductile and enduring blend membranes, indicating an appreciable prospective for fuel cell applications.     

Improving the proton conductivity of sulfonated poly (ether ether ketone) membranes by incorporating a crystalline nanoassembly of trimesic acid and melamine

A novel proton exchange membrane was synthesized by embedding a crystalline which was nano-assembled through trimesic acid and melamine (TMA·M) into the matrix of the sulfonated poly (ether ether ketone) (SPEEK) to enhance the proton conductivity of the SPEEK membrane. Fourier transform infrared indicated that hydrogen bonds existed between SPEEK and TMA·M. XRD and SEM indicated that TMA·M was uniformly distributed within the matrix of SPEEK, and no phase separation occurred. Thermogravimetric analysis showed that this membrane could be applied as high temperature proton exchange membrane until 250 °C. The dimensional stability and mechanical properties of the composite membranes showed that the performance of the composite membranes is superior to that of the pristine SPEEK. Since TMA·M had a highly ordered nanostructure, and contained lots of hydrogen bonds and water molecules, the proton conductivity of the SPEEK/TMA·M-20% reached 0.00513 S cm⁻¹ at 25 °C and relative humidity 100%, which was 3 times more than the pristine SPEEK membrane, and achieved 0.00994 S cm⁻¹ at 120 °C.     

In-situ molecular-level hybridization enabling high-sulfonation-degree sulfonated poly(ether ether ketone) membrane with excellent anti-swelling ability and proton conduction

Sulfonated poly(ether ether ketone) (SPEEK) membrane with high sulfonation degree (SD) is a promising substitute of Nafion as proton exchange membrane (PEM), due to the excellent proton conductivity and low cost. However, its widespread application is limited by the inferior structural stability. Here, we report the fabrication of high SD SPEEK membrane with outstanding structural stability through an in-situ molecular-level hybridization method. Concretely, the ionic nanophase of SPEEK membrane is filled with precursors, which are then in-situ converted into polymer quantum dots (PQDs) by a microwave-assisted polycondensation process. In this manner, the micro-phase separation structure of SPEEK membrane is well maintained. PQDs with abundant hydrophilic functional groups together with the inherent –SO₃H groups impart hybrid membrane highly enhanced proton conductivity of 138.2 mS cm⁻¹ at 80 °C, which is comparable to Nafion. This then offers a 116.3% enhancement in device output power. Meanwhile, PQDs act as cross-linkers via generated electrostatic interactions with SPEEK, affording hybrid membrane with SD of 94.1% an ultralow swelling ratio of 1.35% at 25 °C, about 35 times lower than control membrane. More importantly, the in-situ molecular-level hybridization method is versatile, which can also boost the performances of chitosan (CS)-based membranes.     

Cross-linked membranes based on sulfonated poly (ether ether ketone) (SPEEK)/Nafion for direct methanol fuel cells (DMFCs)

A series of cross-linked membranes based on SPEEK/Nafion have been prepared to improve methanol resistance and dimension stability of SPEEK membrane for the usage in the direct methanol fuel cells (DMFCs). Sulfonated diamine monomer is synthesized and used as cross-linker to improve the dispersion of Nafion in the composite membranes and decrease the negative effect of cross-linking on proton conductivity of membranes. FT-IR analysis shows that the cross-linking reaction is performed successfully. The effects of different contents of Nafion on the properties of cross-linked membranes are investigated in detail. All the cross-linked membranes show lower methanol permeability and better dimensional stability compared with the pristine SPEEK membrane. SPEEK-N30 with the 30 wt % Nafion shows a methanol permeability of 0.73 × 10⁻⁶ cm² s⁻¹ and a water uptake of 24.4% at 25 °C, which are lower than those of the pristine membrane. Meanwhile, the proton conductivity of SPEEK-N30 still remains at 0.041 S cm⁻¹ at 25 °C, which is comparable to that of the pristine SPEEK membrane. All the results indicate that these cross-linked membranes based on SPEEK/Nafion show good prospect for the use as proton exchange membranes.     

Quinoxaline-based crosslinked membranes of sulfonated poly(arylene ether sulfone)s for fuel cell applications

A series of crosslinkable sulfonated poly(arylene ether sulfone)s (SPAESs) were synthesized by copolymerization of 4,4′-biphenol with 2,6-difluorobenzil and 3,3′-disulfonated-4,4′-difluorodiphenyl sulfone disodium salt. Quinoxaline-based crosslinked SPAESs were prepared via the cyclocondensation reaction of benzil moieties in polymer chain with 3,3′-diaminobenzidine to form quinoxaline groups acting as covalent and acid-base ionic crosslinking. The uncrosslinked and crosslinked SPAES membranes showed high mechanical properties and the isotropic membrane swelling, while the later became insoluble in tested polar aprotic solvents. The crosslinking significantly improved the membrane performance, i.e., the crosslinked membranes had the lower membrane dimensional change, lower methanol permeability and higher oxidative stability than the corresponding precursor membranes, with keeping the reasonably high proton conductivity. The crosslinked membrane (CS1-2) with measured ion exchange capacity of 1.53 mequiv. g⁻¹ showed a reasonably high proton conductivity of 107 mS/cm with water uptake of 48 wt.% at 80 °C, and exhibited a low methanol permeability of 2.3 × 10⁻⁷ cm² s⁻¹ for 32 wt.% methanol solution at 25 °C. The crosslinked SPAES membranes have potential for PEFC and DMFCs.     

Sulfonated titania submicrospheres-doped sulfonated poly(ether ether ketone) hybrid membranes with enhanced proton conductivity and reduced methanol permeability

Sulfonated titania submicrospheres (TiO₂-SO₃H) prepared through a facile chelation method are incorporated into sulfonated poly(ether ether ketone) (SPEEK) to fabricate organic-inorganic hybrid membranes with enhanced proton conductivity and reduced methanol permeability for potential use in direct methanol fuel cells (DMFCs). The pristine titania submicrospheres (TiO₂) with a uniform particle size are synthesized through a modified sol-gel method and sulfonated using 4,5-dihydroxy-1,3-benzenedisulfonic acid disodium salt as the sulfonation reagent. The sulfonation process is confirmed by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectra (XPS). The hybrid membranes are systematically characterized in terms of thermal property, mechanical property, ionic exchange capacity (IEC), swelling behavior, and microstructural features. The methanol barrier property and the proton conductivity of the SPEEK/TiO₂-SO₃H hybrid membranes are evaluated. The presence of the fillers reduces methanol crossover through the membrane. Compared with the unsulfonated TiO₂-doped membranes, the TiO₂-SO₃H-doped ones exhibit higher proton conductivity due to the additional sulfonic acid groups on the surface of TiO₂. The hybrid membrane doped with 15 wt.% TiO₂-SO₃H submicrospheres exhibits an acceptable proton conductivity of 0.053 S cm⁻¹ and a reduced methanol permeability of 4.19 × 10⁻⁷ cm² s⁻¹.     

Crosslinked sulfonated poly(ether ether ketone) proton exchange membranes for direct methanol fuel cell applications

In the present study, a series of the crosslinked sulfonated poly(ether ether ketone) (SPEEK) proton exchange membranes were prepared. The photochemical crosslinking of the SPEEK membranes was carried out by dissolving benzophenone and triethylamine photo-initiator system in the membrane casting solution and then exposing the resulting membranes after solvent evaporation to UV light. The physical and transport properties of crosslinked membranes were investigated. The membrane performance can be controlled by adjusting the photoirradiation time. The experimental results showed that the crosslinked SPEEK membranes with photoirradiation 10 min had the optimum performance for proton exchange membranes (PEMs). Compared with the non-crosslinked SPEEK membranes, the crosslinked SPEEK membranes with photoirradiation 10 min markedly improved thermal stabilities and mechanical properties as well as hydrolytic and oxidative stabilities, greatly reduced water uptake and methanol diffusion coefficients with only slight sacrifice in proton conductivities. Therefore, the crosslinked SPEEK membranes with photoirradiation 10 min were particularly promising as proton exchange membranes for direct methanol fuel cell (DMFC) applications.     

Enhancement of fuel cell properties in polyethersulfone and sulfonated poly (ether ether ketone) membranes using metal oxide nanoparticles for proton exchange membrane fuel cell

The proton exchange membrane (PEM) was synthesized using polyethersulfone (PES), sulfonated poly (ether ether ketone) (SPEEK) and nanoparticles. The metal oxide nanoparticles such as Fe₃O₄, TiO₂ and MoO₃ were added individually to the polymer blend (PES and SPEEK). The polymer composite membranes exhibit excellent features regarding water uptake, ion exchange capacity and proton conductivity than the pristine PES membrane. Since the presence of sulfonic acid groups provides by added SPEEK and the unique properties of inorganic nanoparticles (Fe₃O₄, TiO₂ and MoO₃) helps to interconnect the ionic domain by the absorption of more water molecules thereby enhance the conductivity value. The proton conductivity of PES, SPEEK, PES/SPEEK/Fe₃O₄, PES/SPEEK/TiO₂ and PES/SPEEK/MoO₃ membranes were 0.22 × 10^?4 S/cm, 5.18 × 10^?4 S/cm, 3.57 × 10^?4 S/cm, 4.57 × 10^?4 S/cm and 2.67 × 10^?4 S/cm respectively. Even though the blending of PES with SPEEK has reduced the conductivity value to a lesser extent, hydrophobic PES has vital role in reducing the solvent uptake, swelling ratio and improves hydrolytic stability. Glass transition temperature (T_g) of the membranes were determined from DSC thermogram and it satisfies the operating condition of fuel cell system which guarantees the thermal stability of the membrane for fuel cell application.     

Sulfonated poly(ether ether ketone)/poly(ether sulfone) composite membranes as an alternative proton exchange membrane in microbial fuel cells

Custom-made proton exchange membranes (PEM) are synthesized by incorporating sulfonated poly(ether ether ketone) (SPEEK) in poly(ether sulfone) (PES) for electricity generation in microbial fuel cells (MFCs). The composite PES/SPEEK membranes at various composition of SPEEK are prepared by the phase inversion method. The membranes are characterized by measuring roughness, proton conductivity, oxygen diffusion, water crossover and electrochemical impedance. The conductivity of hydrophobic PES membrane increases when a small amount (3–5%) of hydrophilic SPEEK is added. The electrochemical impedance spectra shows that the conductivity and capacitance of PES/SPEEK composite membranes during MFC operation are reduced from 6.15 × 10⁻⁷ to 6.93 × 10⁻⁵ (3197 Ω–162 Ω) and from 3.00 × 10⁻⁷ to 1.56 × 10⁻³ F, respectively when 5% of SPEEK added into PES membrane. The PES/SPEEK 5% membrane has the highest performance compared to other membranes with a maximum power density of 170 mW m⁻² at the maximum current density of 340 mA m⁻². However, the interfacial reaction between the membrane and the cathode with Pt catalyst indicates moderate reaction efficiency compared to other membranes. The COD removal efficiency of MFCs with composite membrane PES/SPEEK 5% is nearly 26-fold and 2-fold higher than that of MFCs with Nafion 112 and Nafion 117 membranes respectively. The results suggest that the PES/SPEEK composite membrane is a promising alternative to the costly perfluorosulfonate membranes presently used as separators in MFC systems.     

Improvement of electrochemical performances of sulfonated poly(arylene ether sulfone) via incorporation of sulfonated poly(arylene ether benzimidazole)

In the present study, modified acid–base blend membranes were fabricated via incorporation of sulfonated poly(arylene ether benzimidazole) (SPAEBI) into sulfonated poly(arylene ether sulfone) (SPAES). These membranes had excellent methanol-barrier properties in addition to an ability to compensate for the loss of proton conductivity that typically occurs in general acid–base blend system. To fabricate the membranes, SPAEBIs, which served as amphiphilic polymers with different degrees of sulfonation (0–50 mol%), were synthesized by polycondensation and added to SPAES. It resulted in the formation of acid–amphiphilic complexes such as [PAES-SO₃]⁻⁺[H-SPAEBI] through the ionic crosslinking, which prevented SO₃H groups in the complex from transporting free protons in an aqueous medium, contributing to a reduction of ion exchange capacity values and water uptake in the blend membranes, and leading to lower methanol permeability in a water–methanol mixture. Unfortunately, the ionic bonding formation was accompanied by a decrease of bound water content and proton conductivity, although the latter problem was solved to some extent by the incorporation of additional SO₃H groups in SPAEBI. In the SPAES–SPAEBI blend membranes, enhancement of proton conductivity and methanol-barrier property was prominent at temperatures over 90 °C. The direct methanol fuel cell (DMFC) performance, which was based on SPAES–SPAEBI-50–5, was 1.2 times higher than that of Nafion^® 117 under the same operating condition.     

Synthesis of the sulfonated poly(ether ether ketone ketone) proton exchange membrane with butane-1,4-diylbis(oxy) spacers and sulfopropyloxy pendants through Friedel-Crafts polyacylation

A novel proton exchange membrane composed of the sulfonated poly(ether ether ketone ketone) (SPEEKK) with butane-1,4-diylbis(oxy) spacers in the backbone and sulfopropyloxy pendants is synthesized through the Friedel-Crafts polyacylation of 1,4-diphenoxybutane (DPB), diethyl-3,3’-([1,1′-biphenyl]-2,2′-diylbis(oxy))bis(propane-1-sulfonate) (SBP–OEt), and terephthaloyl chloride (TPC) under mild conditions. The monomer DPB can introduce the flexible aliphatic butane-1,4-diylbis(oxy) spacers into the polymeric backbone and thus promote the formation of proton transport channels. The as-synthesized SPEEKK exhibits a high proton conductivity of 152.5 mS cm^?1 at 95 °C and 90% relative humidity (RH), a moderate water uptake of 53.2% at 100 °C and also a high ion exchange capacity of 1.74 mmol g^?1. These characteristics are attributed to the enhanced nanophase separation induced by the flexible butane-1,4-diylbis(oxy) spacers and hydrophilic sulfopropyloxy sidechains.     

New highly proton-conducting membrane based on sulfonated poly(arylene ether sulfone)s containing fluorophenyl pendant groups,for low-temperature polymer electrolyte membrane fuel cells

A novel series of sulfonated poly(arylene ether sulfone)s (SPAESs) containing fluorophenyl pendant groups are successfully developed and their membranes are evaluated in low-temperature proton exchange membrane fuel cells. The SPAESs are synthesized from 4,4′-dichlorodiphenylsulfone (DCDPS), 3,3′-disulfonate-4,4′-dichlorodiphenylsulfone (SDCDPS), and (4-fluorophenyl)hydroquinone by nucleophilic aromatic substitution polycondensation. The structure and properties of SPAESs membranes are characterized using ¹H-NMR, EA, FT-IR, TG, and DSC, along with the proton conductivity, water uptake, ion exchange capacity and chemical stability. A maximum proton conductivity of 0.35 S cm⁻¹ at 90 °C is achieved for SPAES membrane with 50% SDCDPS. These SPAES membranes display high dimensional stability and oxidative durability, due to the introduction of fluorophenyl pendant groups on the polymer backbone. The fuel cell performances of the MEAs with SPAES reaches an initial power density of 120.6 mW cm⁻² at 30 °C, and greatly increases to 224.3 mW cm⁻² at 80 °C using H₂ and O₂ gases.     

Improved proton conduction of sulfonated poly (ether ether ketone) membrane by sulfonated covalent organic framework nanosheets

A type of sulfonated covalent organic framework nanosheets (TpPa-SO₃H) was synthesized via interfacial polymerization and incorporated into sulfonated poly (ether ether ketone) (SPEEK) matrix to prepare proton exchange membranes (PEMs). The densely and orderly arranged sulfonic acid groups in the rigid skeleton of the TpPa-SO₃H nanosheets, together with their high-aspect-ratio and well-defined porous structure provide proton-conducting highways in the membrane. The doping of TpPa-SO₃H nanosheets led to an increased ion exchange capacity up to 2.34 mmol g^?1 but a 2-folds reduced swelling ratio, remarkably mitigating the trade-off between high IEC and excessive swelling ratio. Based on the high IEC and orderly arranged proton-conducting sites, the SPEEK/TpPa–SO₃H–5 membrane exhibited the maximum proton conductivity of 0.346 S cm^?1 at 80 °C, 1.91-folds higher than the pristine SPEEK membrane. The mechanical strength of the composite membrane was also improved by 2.05-folds–74.5 MPa. The single H₂/O₂ fuel cell using the SPEEK/TpPa–SO₃H–5 membrane presented favorable performance with an open voltage of 1.01 V and a power density of 86.54 mW cm^?2.     

Novel modification method to prepare crosslinked sulfonated poly(ether ether ketone)/silica hybrid membranes for fuel cells

Crosslinked organic-inorganic hybrid membranes are prepared from hydroxyl-functionalized sulfonated poly(ether ether ketone) (SPEEK) and various amounts of silica with the aims to improve dimensional stability and methanol resistance. The partially hydroxyl-functionalized SPEEK is prepared by the reduction of some benzophenone moieties of SPEEK into the corresponding benzhydrol moieties which is then reacted with (3-isocyanatopropyl)triethoxysilane (ICPTES) to get a side chained polymer bearing triethoxysilyl groups. These groups are subsequently co-hydrolyzed with tetraethoxysilane (TEOS) and allow the membrane to form a crosslinked network via a sol-gel process. The obtained hybrid membranes with covalent bonds between organic and inorganic phases exhibit much lower methanol swelling ratio and water uptake. With the increase of silica content, the methanol permeability coefficient of the hybrid membranes decreases at first and then increased. At silica content of about 6 wt.%, the methanol permeability coefficient reaches a minimum of 7.15 × 10⁻⁷ cm² s⁻¹, a 5-fold decrease compared with that of the pristine SPEEK. Despite the fact that the proton conductivity is decreased to some extent as a result of introduction of the silica, the hybrid membranes with silica content of 4-8 wt.% shows higher selectivity than Nafion117.     

4-Aminopyridine grafted sulfonated poly(arylene ether ketone sulfone) proton exchange membrane with high relative selectivity for fuel cells

A series of sulfonated poly(arylene ether ketone sulfone)s polymer having a degree of sulfonation of 80% and a carboxyl group in the side chain (C-SPAEKS) were prepared by polycondensation. The 4-aminopyridine grafted sulfonated poly(arylene ether ketone sulfone)s polymer membranes (SPPs) were prepared by amidation reaction with the carboxyl group to immobilize 4-aminopyridine on the side chain. The ¹H NMR results and Fourier transform infrared of SPP membranes demonstrated the successful grafting of the 4-aminopyridine. Proton conductivity, water absorption, swelling ratio, and thermal stability of different proportions of SPP membranes were investigated under the different conditions. With the increase of pyridine grafting content, the methanol permeability coefficient of the membrane decreased significantly from 8.17 × 10⁻⁷ cm²s⁻¹ to 8.92 × 10⁻⁸ cm²s⁻¹ at 25 °C. And, the proton conductivity and relative selectivity of the membrane were positively correlated with the grafted pyridine content. Among them, the SPP-4 membrane exhibited the highest proton conductivity of 0.088 Scm⁻¹ at 100 °C. The relative selectivity increased from 4.73 × 10⁴ S scm⁻³ to 9.84 × 10⁴ S scm⁻³.     

Optimal thermal treatment conditions for durability improvement of highly sulfonated poly(ether ether ketone) membrane for polymer electrolyte fuel cell applications

In this study, a series of sulfonated poly(ether ether ketone) (SPEEK) membranes are prepared and thermally treated in different conditions, i.e., temperature (120–180 °C), time (6–42 h), and residual solvent (RS) values (15–45%). Proton conductivity, water uptake, swelling ratio, hydrogen permeability, mechanical properties, and chemical stability of samples are systematically investigated. Also, membranes' characteristics are studied using FTIR, TGA, and AFM. Two stages of “annealing dominated” and “cross-linking dominated” were observed during thermal treatment. Annealing dominated samples exhibited higher flexibility and overall stability with annealing-induced homogenous microstructure while cross-linking dominated samples showed poor mechanical properties and proton conductivity. Results indicate that the treatment of SPEEK membranes with higher RS value facilitates cross-linking at much lower temperatures with a more controlled rate to inhibit excessive cross-linking. Furthermore, response surface methodology suggested that prolonged thermal treatment at low temperatures (<130 °C) with RS of around 30% results in sufficient proton conductivity and improved overall stability.     

Influence of mesoporous phosphotungstic acid on the physicochemical properties and performance of sulfonated poly ether ether ketone in proton exchange membrane fuel cell

This study demonstrates the successful development of hybrid mesoporous siliceous phosphotungstic acid (mPTA-Si) and sulfonated poly ether ether ketone (SPEEK) as a proton exchange membrane with a high performance in hydrogen proton exchange membrane fuel cells (PEMFC). SPEEK acts as a polymeric membrane matrix and mPTA-Si acts as the mechanical reinforcer and proton conducting enhancer. Interestingly, incorporating mPTA-Si did not affect the morphological aspect of SPEEK as dense membrane upon loading the amount of mPTA-Si up to 2.5 wt%. The water uptake reduced to 14% from 21.5% when mPTA-Si content increases from 0.5 to 2.5 wt% respectively. Meanwhile, the proton conductivity increased to 0.01 Scm^?1 with 1.0 wt% mPTA-Si and maximum power density of 180.87 mWcm^?2 which is 200% improvement as compared to pristine SPEEK membrane. The systematic study of hybrid SP-mPTA-Si membrane proved a substantial enhancement in the performance together with further improvement on physicochemical properties of parent SPEEK membrane desirable for the PEMFC application.     

Novel branched sulfonated poly(ether ether ketone)s membranes for direct methanol fuel cells

In this article, novel branched sulfonated poly(ether ether ketone)s (Br-SPEEK) containing various amounts of 1,3,5-tris(4-fluorobenzoyl)benzene as the branching agent have been successfully prepared. Compared with the traditional linear polymer membranes, the membranes prepared by Br-SPEEK showed improved mechanical strength, excellent dimensional stability and superior oxidative stability with similar proton conductivity. Notably, the Br-SPEEK-10 membrane began to break after 267 min in Fenton's reagent at 80 °C, which was 4 times longer than that of the L-SPEEK. Although the proton conductivity decreased with the addition of the branching agent, satisfying methanol permeability value was observed (down to 6.3 × 10⁻⁷ cm² s⁻¹), which was much lower than Nafion 117 (15.5 × 10⁻⁷ cm² s⁻¹). All the results indicated that the novel branched sulfonated poly(ether ether ketone)s membrane was potential candidate as proton conductive membranes for application in fuel cells.     

Sulfonated poly(ether ether ketone)/polybenzimidazole oligomer/epoxy resin composite membranes in situ polymerization for direct methanol fuel cell usages

A diamine-terminated polybenzimidazole oligomer (o-PBI) has been synthesized for introducing the benzimidazole groups (BI) into sulfonated poly(ether ether ketone) (SPEEK) membranes. SPEEK/o-PBI/4,4′-diglycidyl(3,3′,5,5′-tetramethylbiphenyl) epoxy resin (TMBP) composite membranes in situ polymerization has been prepared for the purpose of improving the performance of SPEEK with high ion-exchange capacities (IEC) for the usage in the direct methanol fuel cells (DMFCs). The composite membranes with three-dimensional network structure are obtained through a cross-linking reaction between PBI oligomer and TMBP and the acid-base interaction between sulfonic acid groups and benzimidazole groups. Resulting membranes show a significantly increasing of all of the properties, such as high proton conductivity (0.14 S cm⁻¹ at 80 °C), low methanol permeability (2.38 × 10⁻⁸ cm² s⁻¹), low water uptake (25.66% at 80 °C) and swelling ratio (4.11% at 80 °C), strong thermal and oxidative stability, and mechanical properties. Higher selectivity has been found for the composite membranes in comparison with SPEEK. Therefore, the SPEEK/o-PBI/TMBP composite membranes show a good potential in DMFCs usages.     

Enhancement of proton conductivity of polymer electrolyte membrane enabled by sulfonated nanotubes

Proton exchange membrane (PEM) with high proton conductivity is crucial to the commercial application of PEM fuel cell. Herein, sulfonated halloysite nanotubes (SHNTs) with tunable sulfonic acid group loading were synthesized and incorporated into sulfonated poly(ether ether ketone) (SPEEK) matrix to prepare nanocomposite membranes. Physicochemical characterization suggests that the well-dispersed SHNTs enhance the thermal and mechanical stabilities of nanocomposite membranes. The results of water uptake, ionic exchange capacity, and proton conductivity corroborate that the embedded SHNTs interconnect the ionic channels in SPEEK matrix and donate more continuous ionic networks. These networks then serve as proton pathways and allow efficient proton transfer with low resistance, affording enhanced proton conductivity. Particularly, incorporating 10% SHNTs affords the membrane a 61% increase in conductivity from 0.0152 to 0.0245 S cm⁻¹. This study may provide new insights into the structure-properties relationships of nanotube-embedded conducting membranes for PEM fuel cell.