Ultrathin-layered MoS2 hollow nanospheres decorating Ni3S2 nanowires as high effective self-supporting electrode for hydrogen evolution reaction

High-activity and cost-effective transition metal sulfides (TMSs) have attracted tremendous attention as promising catalysts for hydrogen evolution reaction (HER). However, a significant challenge is the simultaneous construction of abundant electrochemical active sites and the fast electronic transmission path to boost a high-efficient HER. Herein, we demonstrate a facile one-step hydrothermal preparation of MoS₂ hollow nanospheres decorating Ni₃S₂ nanowires supported on Ni foam (NF), without any other additional template, surfactant or annealing. In this three-dimensional (3D) heterostructure, the ultrathin-layered MoS₂ hollow nanospheres contribute to the promotion of the total surface area and the electrochemical active sites. Meanwhile, the Ni₃S₂ nanowires are beneficial to the high electrical conductivity. Consequently, the optimized MoS₂/Ni₃S₂/NF-200-24 electrocatalyst presents an extremely superior HER activity to that of individual MoS₂/NF and Ni₃S₂/NF. The HER overpotentials are 85 mV at 10 mA cm⁻² and 189 mV at 100 mA cm⁻², which are also comparable with the state-of-the-art 20% Pt/C/NF electrode at both low and high current.     

A nano-spherical structure Ni3S2/Ni(OH)2 electrocatalyst prepared by one-step fast electrodeposition for efficient and durable water splitting

Developing non-noble metal catalysts with excellent electrocatalytic performance and stability is of great significance to hydrogen production by water electrolysis, but there are still problems of low activity, complex preparation and high cost. Herein, we fabricated a novel Ni₃S₂/Ni(OH)₂ dual-functional electrocatalyst by a one-step fast electrodeposition on nickel foam (NF). While maintaining the electrocatalytic performance of Ni₃S₂, the existence of heterostructure and Ni(OH)₂ co-catalyst function greatly improves the overall water splitting performance of Ni₃S₂/Ni(OH)₂–NF. Hence, It shows a low overpotential of 66 mV at 10 mA cm^?2 for HER and 249 mV at 20 mA cm^?2 for OER. The dual-functional electrocatalyst needs only 1.58 V at 20 mA cm^?2 when assembled two-electrode electrolytic cell. Impressively, the electrocatalyst also shows outstanding catalytic stability for about 800 h when 20 and 50 mA cm^?2 constant current was applied, respectively which demonstrates a potential electrocatalyst for overall water splitting.     

Controlled synthesis of NiCoM (M=P,S, Se,O)–Ni3S2–MoS2 hybrid material as environmentally friendly water splitting catalyst

The study of high efficiency and low cost catalysts is of great significance to the overall development of electrochemistry. In this paper, NiCoM (M = P, S, Se, O)–Ni₃S₂–MoS₂ hybrid material was prepared by hydrothermal, calcination and hydrothermal three-step reaction method, and its hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline environment were studied and compared. The experimental results showed that at 10 mA cm^?2, the overpotential of NiCoP–Ni₃S₂–MoS₂ was only 140 mV for HER, while the overpotential of NiCoSe–Ni₃S₂–MoS₂ was only 160 mV for OER. Compared with other catalysts, the activity of NiCoP–Ni₃S₂–MoS₂ and NiCoSe–Ni₃S₂–MoS₂ was higher, and the chemical reagents needed for preparation were cheap and low cost. What is noteworthy is that the morphology of NiCoP–Ni₃S₂–MoS₂ material change after long time stability test for hydrogen evolution reaction, the change makes the performance of the samples toward a better direction. A series of characterization found that the surface of the NiCoP–Ni₃S₂–MoS₂ samples increased more holes and more active site, and did not produce new material after other characterization. Density functional theory calculation shows that the presence of this MoS₂ material accelerates the kinetics of hydrogen production and this Co₂P material enhances the conductivity of the material. Their synergistic effect makes the NiCoP–Ni₃S₂–MoS₂ catalyst exhibit enhanced hydrogen production activity. The bramble structure of NiCoSe–Ni₃S₂–MoS₂ allows the sample to have more active sites and higher electrocatalytic activity during the OER process. This experiment provides new insights into the preparation of robust water splitting catalysts by simple methods.     

Self-supported N-Doped Carbon@NiXCo2-XP core-shell nanorod arrays on 3D Ni foam for boosted hydrogen evolution reaction

The development of highly efficient and low-cost electrocatalysts for large-scale hydrogen evolution reaction (HER) is great important but remains a significant challenge. Transition-metal phosphides (TMPs) have attracted intense attention as promising non-noble-metal HER electrocatalysts due to their unique electronic properties and high intrinsic catalytic activities. Herein, we directly grew Ni_XCo_2-XP nanorod wrapped with N-doped carbon shell on 3D Ni foam to fabricate a self-supported electrode with core-shell nanorod array morphology. The obtained hybrid electrode exhibits remarkable electrocatalytic HER activity over a wide pH range with low overpotentials of 121 mV and 181 mV to obtain the current density of 200 mA cm⁻² in 0.5 M H₂SO₄ and 1 M KOH electrolytes, respectively, which is comparable to that of the current state-of-the-art Pt/C electrocatalyst. The experimental results indicate that the elaborate architectural superiority and compositional synergy of this hybrid electrode give rise to the boosted HER performance.     

Ni3S2-MoSx nanorods grown on Ni foam as high-efficient electrocatalysts for overall water splitting

In order to solve the problem of large overpotential in water electrolysis for hydrogen production, transition metal sulfides are promising bifunctional electrocatalysts for hydrogen evolution reaction/oxygen evolution reaction that can significantly reduce overpotential. In this work, Ni₃S₂ and amorphous MoS_x nanorods directly grown on Ni foam (Ni₃S₂-MoS_x/NF) were prepared via one-step solvothermal process, which were used as a high-efficient electrocatalyst for overall water splitting. The Ni₃S₂-MoS_x/NF composite exhibits very low overpotentials of 65 and 312 mV to reach 10 mA cm⁻² and 50 mA cm⁻² in 1.0 M KOH for HER and OER, respectively. Besides, it exhibits a low Tafel slope (81 mV dec⁻¹ for HER, 103 mV dec⁻¹ for OER), high exchange current density (1.51 mA cm⁻² for HER, 0.26 mA cm⁻² for OER), and remarkable long-term cycle stability. This work provides new perspective for further the development of highly effective non-noble-metal materials in the energy field.     

Synthesis and electrocatalytic activity of Ni0.85Se/MoS2 for hydrogen evolution reaction

Recently, the replacement of expensive platinum-based catalytic materials with non-precious metal materials to electrolyze water for hydrogen separation has attracted much attention. In this work, Ni_0.85Se, MoS₂ and their composite Ni_0.85Se/MoS₂ with different mole ratios are prepared successfully, as electrocatalysts to catalyze the hydrogen evolution reaction (HER) in water splitting. The result shows that MoS₂/Ni_0.85Se with a molar ratio of Mo/Ni = 30 (denoted as M30) has the best catalytic performance towards HER, with the lowest overpotential of 118 mV at 10 mA cm⁻², smallest Tafel slope of 49 mV·dec⁻¹ among all the synthesized materials. Long-term electrochemical testing shows that M30 has good stability for HER over at least 30 h. These results maybe due to the large electrochemical active surface area and high conductivity. This work shows that transition metal selenides and sulfides can form effective electrocatalyst for HER.     

Interface engineering of Ni0.85Se/Ni3S2 nanostructure for highly enhanced hydrogen evolution in alkaline solution

Interface engineering is considered as an effective strategy to improve the hydrogen evolution reaction (HER) performance of electrocatalysts. Herein, the Ni_0.85Se/Ni₃S₂ heterostructure grown on nickel foam (NF) is synthesized via successive wet-chemical processes. The obtained Ni_0.85Se/Ni₃S₂ heterostructure is firstly investigated as an HER electrocatalyst in alkaline media and exhibits more excellent electrochemical properties over Ni₃S₂. And it delivers a low overpotential of 145 mV at a current density of ?10 mA cm^?2, and superior stability. Based on the analysis of high-resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectra (XPS), the enhanced HER activity is due to the modulation of surface electronic structure, ascribing from the construction of heterointerface between Ni_0.85Se and Ni₃S₂. Meanwhile, the Ni_0.85Se/Ni₃S₂ heterostructure prepared in this work is also verified to be employed as a promising alternative to noble metal catalysts in HER.     

Vermicular Ni3S2–Ni(OH)2 heterostructure supported on nickel foam as efficient electrocatalyst for hydrogen evolution reaction in alkaline solution

Alkaline solution is considered to be more suitable for industrial application of hydrogen production by water electrolysis. However, most of the low-cost electrocatalyts such as Ni₃S₂ has poor ability to dissociate HO–H, resulting in unsatisfied hydrogen evolution performance in alkaline media. In this paper, a novel vermicular structure of Ni₃S₂–Ni(OH)₂ hybrid have been successfully prepared on nickel foam substrate (v-Ni₃S₂–Ni(OH)₂/NF) through a facile two-step containing hydrothermal and electrodeposition processes. The heterostructure consists of rod-like Ni₃S₂ and Ni(OH)₂ nanosheets, in which Ni(OH)₂ is coated on the surface of Ni₃S₂. This structure not only constructs a fast electron transfer channel but also possesses rich heterointerface, thus accelerating the Volmer step and allowing more active sites of Ni₃S₂ to functioning well. As a result, v-Ni₃S₂–Ni(OH)₂/NF exhibited excellent electrocatalytic activity toward HER in 1.0 M KOH solution. It only needs 78 mV and 137 mV to drive current density of 10 mA cm⁻² and 100 mA cm⁻². Moreover, the catalytic stability of this electrocatalyst in alkaline solution is also satisfactory.     

Superhydrophilic 3D peony flower-like Mo-doped Ni2S3@NiFe LDH heterostructure electrocatalyst for accelerating water splitting

Constructing highly efficient nonprecious electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is essential to improve the efficiency of overall water splitting, but still remains lots of obstacles. Herein, a novel 3D peony flower-like electrocatalyst was synthesized by employing Mo–Ni₂S₃/NF nanorod arrays as scaffolds to in situ growth ultrathin NiFe LDH nanosheets (Mo-Ni₂S₃@NiFe LDH). As expected, the novel peony flower-like Mo–Ni₂S₃@NiFe LDH displays superior electrocatalytic activity and stability for both OER and HER in alkaline media. Low overpotentials of only 228 mV and 109 mV are required to achieve the current densities of 50 mA cm^?2 and 10 mA cm^?2 for OER and HER, respectively. Additionally, the material remarkably accelerates water splitting with a low voltage of 1.54 V at 10 mA cm^?2, which outperforms most transition metal electrodes. The outstanding electrocatalytic activity benefits from the following these features: 3D peony flower-like structure with rough surface provides more accessible active sites; superhydrophilic surfaces lead to the tight affinity between electrode with electrolyte; metallic Ni substrate and highly conductive Mo–Ni₂S₃ nanorods scaffold together with offer fast electron transfer; the nanorod arrays and porous Ni foam accelerate gas bubble release and ions transmission; the strong interfacial effect between Mo-doped Ni₃S₂ and NiFe LDH shortens transport pathway, which are benefit for electrocatalytic performance enhancement. This work paves a new avenue for construction and fabrication the 3D porous structure to boost the intrinsic catalytic activities for energy conversion and storage applications.     

Self-supported Ni3S2@MoS2 core/shell nanorod arrays via decoration with CoS as a highly active and efficient electrocatalyst for hydrogen evolution and oxygen evolution reactions

A hierarchically porous MoS₂ on Ni₃S₂ nanorod array on Ni foam (MoS₂/Ni₃S₂/NF) was firstly fabricated through a simple microwave-assisted hydrothermal method, and then followed by electrochemical deposition approach in which MoS₂/Ni₃S₂/Ni foam is decorated with CoS (CoSMoS₂/Ni₃S₂/NF). In contrast to conventional hydrothermal approach, microwave irradiation accelerates the synthesis of MoS₂/Ni₃S₂/Ni foam from time of >20 h–2 h. The characterization of CoSMoS₂/Ni₃S₂/NF by scanning electron microscope (SEM) and high resolution transmission electron microscope (HRTEM) indicate that a whole scale of 1D the Ni₃S₂ nanorods were hierarchically integrated with MoS₂ and CoS nanosheets. The as-synthesized CoSMoS₂/Ni₃S₂/NF hybrid not only endows the ease transport of electrons along Ni₃S₂ nanorods to Ni foam, but also accommodates maximal exposure of active edge sites to the reactants through hierarchically porous CoS doped MoS₂ nanosheets, accomplishing the promoted kinetics and activity for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). By electrochemical measurements such as linear sweep voltammetry (LSV) and electrochemical impedance spectroscope (EIS), we find that the CoSMoS₂/Ni₃S₂/NF hybrid shows markedly enhanced electrochemical performance for both HER and OER. Specifically, the optimal CoSMoS₂/Ni₃S₂/NF8C possesses the low overpotentials (η₁₀) of 85 and 225 mV at current density (|j|) of 10 mA cm^?2 in 1.0 M KOH and the small 62.3 and 46.1 mV dec^?1 Tafel slope for HER and OER, respectively, outperforming those of most of the current noble metal-free electrocatalysts. These results highlight the fact that CoSMoS₂/Ni₃S₂/NF is a high-performance, noble-metal-free electro-catalyst, and provide a potential avenue toward achieving an enhanced electrocatalytic activity towards both in HER and OER. Yet the duration of the as prepared catalyst in OER still need to be improved.     

Interlaced rosette-like MoS2/Ni3S2/NiFe-LDH grown on nickel foam: A bifunctional electrocatalyst for hydrogen production by urea-assisted electrolysis

In targeting the most important energy and environmental issues in current society, the development of low-cost, bifunctional electrocatalysts for urea-assisted electrocatalytic hydrogen (H₂) production is an urgent and challenging task. In this work, interlaced rosette-like MoS₂/Ni₃S₂/NiFe-layered double hydroxide/nickel foam (LDH/NF) is successfully synthesized by a two-step hydrothermal reaction. Due to its unique interlaced heterostructure, MoS₂/Ni₃S₂/NiFe-LDH/NF exhibits excellent bifunctional catalytic activity towards the urea oxidation reaction (UOR) and the hydrogen evolution reaction (HER) in 1.0 M KOH with 0.5 M urea. In a concurrent two-electrode electrolyser (MoS₂/Ni₃S₂/NiFe-LDH/NF(+,-)), only voltage of 1.343 V is required to reach 50 mA cm⁻², which is 216 mV lower than for pure water splitting. Furthermore, after 16 h of urea electrolysis in 1.0 M KOH with 0.5 M urea, the current density remains at 98% of the original value. Thus, the catalyst is not only favorable for H₂ production, but also has great significance for the problem of urea-rich wastewater treatment.     

Flower-like MoS2 with stepped edge structure efficient for electrocatalysis of hydrogen and oxygen evolution

A flower-like MoS₂ with a stepped edge structure was successfully and controllably fabricated as a bifunctional electrocatalyst efficient for hydrogen and oxygen evolution reactions. The hierarchically porous polycrystalline MoS₂ was characterized by a combination analysis of XRD, Raman, XPS, N₂-BET, SEM and TEM. In the hydrogen evolution reaction (HER), this as-obtained MoS₂/Ni catalyst presents significantly enhanced performance versus most previously studied catalysts. In the oxygen evolution reaction (OER), the electrocatalyst MoS₂/Ni gives rise to a rather low overpotential of ∼0.335 V at 20.0 mA cm⁻² and much enhanced durability over 6 h.     

Metal-organic frameworks derived self-supported Ni2P nanorod arrays for electrocatalytic hydrogen evolution

The development of efficient and low-cost electrocatalysts for hydrogen evolution reaction (HER) is of importance. Herein, we demonstrate a self-supported Ni₂P nanostructure with nanorod arrays morphology, fabricated by directly growing metal-organic frameworks (MOFs) on the commercial nickel foam prior to phosphorization treatment, as an electrocatalyst for HER. This electrocatalyst exhibits remarkable electrocatalytic HER activity in an alkaline electrolyte, affording current densities of 10 and 100 mA cm^?2 at the overpotentials of 120 and 168 mV, respectively, accompanied with a low Tafel slope of 37 mV dec^?1. Furthermore, this electrocatalyst shows a current density of 105 mA cm^?2, and this current density can be retained for more than 20 h, suggesting its superior stability. This remarkable HER performance is believed a result of superiority for its structural integrality and mechanical stability.     

Bimetallic-metal organic framework-derived Ni3S2/MoS2 hollow spheres as bifunctional electrocatalyst for highly efficient and stable overall water splitting

Herein, strongly coupled Ni₃S₂/MoS₂ hollow spheres derived from NiMo-based bimetal-organic frameworks are successfully synthesized for overall water splitting via a one-pot solvothermal method followed by sulfurization. A well-defined hollow spherical structure with a heterointerface between Ni₃S₂ and MoS₂ is constructed using solvothermal and sulfurization processes. Owing to their bimetallic heterostructure, porous hollow carbon structure with large surface area, and numerous exposed active sites, the Ni₃S₂/MoS₂ hollow spheres are found to be efficient electrocatalysts for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). The heterostructured Ni₃S₂/MoS₂ hollow spheres show small overpotentials of 303 and 166 mV to reach a current density of 10 mA cm^?2 for the OER and HER in 1.0 M KOH, respectively. Furthermore, an overall water-splitting electrolyzer consisting of the Ni₃S₂/MoS₂ hollow spheres as both the anode and cathode requires a very low cell voltage of 1.62 V to drive a current density of 10 mA cm^?2 with outstanding long-term stability for 100 h. Our findings offer a new pathway for the design and synthesis of electrochemically advanced bifunctional catalysts for various energy storage and conversion applications.     

Transition metal doped MoS2 nanosheets for electrocatalytic hydrogen evolution reaction

In the present work, the effect of transition metals (Ni, Fe, Co) doping on 2-dimensional (2D) molybdenum disulfide (MoS₂) nanosheets for electrocatalytic hydrogen evolution reaction (HER) was explored. A simple and cost-effective hydrothermal method was adopted to synthesis transition metals doped MoS₂ nanosheets. The morphological and spectroscopic studies evidence the formation of high-quality MoS₂ nanosheets with the randomly doped metal ions. Notably, the Ni–MoS₂ displayed superior HER performance with an overpotential of ?0.302 V vs. reversible hydrogen electrode (RHE) (to attain the current density of 10 mA cm^?2) as compared to the other transition metals doped MoS₂ (Co–MoS₂, Fe–MoS₂). From the Nyquist plot, superior charge transport from the electrocatalyst to the electrolyte in Ni–MoS₂ was realized and confirmed that Ni doping provides the necessary catalytic active sites for rapid hydrogen production. The stable performance was confirmed with the cyclic test and chronoamperometry measurement and envisaged that hydrothermally synthesized Ni–MoS₂ is a highly desirable cost-effective approach for electrocatalytic hydrogen generation.     

Fluff spherical Co–Ni3S2/NF for enhanced hydrogen evolution

Ni₃S₂ is a kind of HER catalyst electrode with high efficiency and easy preparation. However, due to the weak electrochemical adsorption capacity of water molecules at the Ni site, it is not conducive to the dissociation of water molecules. At the same time, strong sulfur-hydrogen bond is easily formed at the S site, which greatly hinders the desorption and bonding of hydrogen atom to produce hydrogen. Hydrogen evolution performance of Ni₃S₂ in alkaline media needs to be improved. In this paper, fluff spherical Co–Ni₃S₂ was grown in situ on nickel foam by two-step hydrothermal method successfully. By doping cobalt ions, the strong interaction of S–H bond on Ni₃S₂ surface was weakened, the adsorption and dissociation of water molecules were promoted, and the catalyst was exposed to more reactive centers, so as to improve the hydrogen evolution performance of cathodic reduction reaction. Electrochemical test and Transient Photovoltage (TPV) tests show that Co–Ni₃S₂ has fast reaction kinetics and high electron transfer rate, especially it only needs 148 mV low overpotential to reach 10 mA cm^?2 in 1.0 M KOH alkaline electrolyte, which is better than Ni₃S₂/NF (250 mV). In addition, Co–Ni₃S₂ also has excellent electrochemical stability. Density functional theory (DFT) calculations confirm that the optimized adsorption energy enables the catalyst to exhibit excellent HER activity. This work provides useful guidance to construction of effective nickel related HER catalysts.     

Rational design of Ni-induced NC @Mo2C@MoS2 sphere electrocatalyst for efficient hydrogen evolution reaction in acidic and alkaline media

Exploiting efficient and low-cost electrocatalyst for Hydrogen Evolution Reaction (HER) of water electrolysis remains a challenge. Herein, we designed an efficient electrocatalyst of Ni-induced nitrogen-doped carbon @ molybdenum carbide @ molybdenum disulfide sphere (NC@Mo₂C@MoS₂-(Ni)) by two simple coating steps following pyrolysis process. Benefiting from the regular spherical morphology, unique structure, synergistic effect between Mo₂C and MoS₂, inducement effect of elemental Ni that initial added and removed in final synthesis procedure, heteroatom N and P doping. The catalyst NC@Mo₂C@MoS₂-(Ni) exhibits relatively good catalytic performance of overpotentials of 205 and 216 mV at 10 mA cm^?2 and Tafel slopes of 61.4 and 42.7 mV dec^?1 in acidic and basic media, respectively. This work not only fabricate the electrocatalyst of NC@Mo₂C@MoS₂-(Ni) towards HER, but also provides a way to rationally design more efficient other functional electrocatalysts.     

Accelerate the alkaline hydrogen evolution reaction of the heterostructural Ni2P@Ni(OH)2/NF by dispersing a trifle of Ru on the surface

Electrocatalytic water splitting for hydrogen production plays a vital role in the development of new energy field, but there is still a lack of low-content precious metal or cost-effective non-noble metal catalysts for the hydrogen evolution reaction (HER). Therefore, how to develop the catalysts with a smaller amount of precious metal to achieve higher performance is still a major challenge. Herein, we have fabricated Ru–Ni₂P@Ni(OH)₂/NF-2 heterostructure by phosphating Ni(OH)₂/NF and then anchoring Ru on the surface through wet chemical strategy. Benefiting from its optimal ΔG_H1 and synergistic effect, this Ru–Ni₂P@Ni(OH)₂/NF-2 catalyst shows superior electrocatalytic HER kinetics in alkaline electrolyte. A small overpotential of 31 mV is needed for this electrocatalyst to obtain the current densities of 10 mA cm^?2 with remarkable durability over 24 h. This work provides a new strategy for the preparation of effective HER electrocatalyst with a low precious metal content.     

Synthesis of Ni2P/Ni5P4 on porous N decorated rGO foam for efficiently electrocatalytic hydrogen evolution reaction

As a new generation of non-precious metal catalysts, nickel phosphide is regarded as an ideal substitute for precious metal platinum in electrochemical hydrogen evolution. Here, a hydrogen evolution reaction (HER) electrocatalyst is developed by in situ growth of Ni₂P/Ni₅P₄ heterostructures on porous N decorated rGO foam (named Ni₂P/Ni₅P₄/N-rGO). The porous rGO foam structure provides a larger surface area and abundant active sites. The Ni₂P/Ni₅P₄ nanoparticles with heterostructures are uniformly distributed on the rGO sheet, which enhance the charge transfer ability. The decorating of N element also correspondingly improves the HER performance. The as-prepared Ni₂P/Ni₅P₄/N-rGO exhibits excellent HER performance in alkaline medium. When the current density is 10 mA cm^?2, the overpotential is only 22 mV. No obvious loss of HER activity after 2000 cyclic voltammetry indicates that the composite has excellent stability. This work presents a valuable route for fabricating inexpensive and high-performance catalysts for electrocatalysis.     

High throughput preparation of Ni–Mo alloy thin films as efficient bifunctional electrocatalysts for water splitting

The synthesis of cost-effective and high-performance electrocatalysts for water splitting is the main challenge in electrochemical hydrogen production. In this study, we adopted a high throughput method to prepare bi-metallic catalysts for oxygen/hydrogen evolution reactions (OER/HER). A series of Ni–Mo alloy electrocatalysts with tunable compositions were prepared by a simple co-sputtering method. Due to the synergistic effect between Ni and Mo, the intrinsic electrocatalytic activity of the Ni–Mo alloy electrocatalysts is improved, resulting in excellent HER and OER performances. The Ni₉₀Mo₁₀ electrocatalyst shows the best HER performance, with an extremely low overpotential of 58 mV at 10 mA cm^?2, while the Ni₄₀Mo₆₀ electrocatalyst shows an overpotential of 258 mV at 10 mA cm^?2 in OER. More significantly, the assembled Ni₄₀Mo₆₀//Ni₉₀Mo₁₀ electrolyzer only needs a cell voltage of 1.57 V to reach 10 mA cm^?2 for overall water splitting.