A fuzzy adaptive variable structure controller with applications torobot manipulators

A new adaptive fuzzy control algorithm is developed in this paper, which has a regular fuzzy controller and a supervisory control term. This control algorithm does not require the system model, but has stability assurance for the closed-loop controlled system. The design is simple, in the sense that both the membership functions and the rule base are simple, yet generic. It can be applied to a large class of robotic and other mechanical systems.     

用GA寻优线性系统模糊控制器规则

控制精度和自适应能力一直是模糊控制应用中较难解决的问题，解决这一问题的关键在于选取适当的控制规则，而遗传算法可以较好地解决常规的数学优化技术所不能有效解决的问题。该文给出了对于具有修正因子的控制规则，采用遗传算法对其参数进行自调整的方法，它可提高模糊控制器的性能。通过仿真实验表明了该方法对于线性系统的控制是有效的。     

自适应模糊PID控制器在跟踪器瞄准线稳定系统中的应用

针对陀螺惯性平台上的跟踪器瞄准线稳定系统中非线性不确定因素对稳定精度的影响, 设计了一种自适应模糊PID复合控制策略. 提出了改进的自适应调整因子和学习算法进行控制参数和规则的在线修正; 采用PID控制克服模糊控制固有的精度盲区. 实验结果表明该方法在一定测量噪声和速度敏感范围内, 能有效地隔离载体扰动,保证跟踪器对目标的准确瞄准, 具有动态响应快、稳定精度高、自适应抗干扰鲁棒性强等特点.     

模糊自适应遗传算法的原理和发展

模糊自适应遗传算法是将模糊控制器应用于遗传算法性能和参数控制的新型进化算法。该文论述了模糊自适应遗传算法的定义和基本原理,并根据规则基不同的产生方式对其进行了系统分类,最后提出了模糊自适应遗传算法性能改进和应用研究的发展方向。     

基于小波变换的电液伺服试验系统多变量控制

针对电液伺服系统的复杂非线性和参数不确定性特性，提出一种基于小波变换的“主控制器”结合“带有智能权函数模糊控制器”的复合控制策略，并用于电液伺服系统的多变量控制。主控制器由一个包含PID控制规则的神经网络构成，在整个系统控制中起着主导作用；“模糊控制器”的作用是抑制干扰，保证系统响应的快速性。仿真试验结果证明，该方法具有良好的自学习和自适应解耦控制性能，能有效地提高系统的稳态精度，使系统具有较强鲁棒性，并具有响应速度快、超调量小等特点；可用于电液伺服试验系统的多变量控制。     

A multirule-base controller using the robust property of a fuzzycontroller and its design method

This paper suggests a new fuzzy adaptive controller, which is able to solve the problems of classical adaptive controllers and conventional fuzzy adaptive controllers. It explains the architecture of a fuzzy adaptive controller using the robust property of a fuzzy controller. The basic idea of new adaptive control scheme is that an adaptive controller can be constructed with parallel combination of robust controllers. This new adaptive controller uses a multirule-base architecture which has several independent fuzzy controllers in parallel, each with different robust stability area. Out of several independent fuzzy controllers, the most suited one is selected by a system identifier which observes variations in the controlled system parameter. Here, we propose a design procedure which can be carried out mathematically and systematically from the model of a controlled system; related mathematical theorems and their proofs are also given. The performance of the proposed adaptive control algorithm is analyzed through a design example and a DC motor control simulation     

Adaptive neuro fuzzy controller for adaptive compliant robotic gripper

The requirement for new flexible adaptive grippers is the ability to detect and recognize objects in their environments. It is known that robotic manipulators are highly nonlinear systems, and an accurate mathematical model is difficult to obtain, thus making it difficult то control using conventional techniques. Here, a novel design of an adaptive neuro fuzzy inference strategy (ANFIS) for controlling input displacement of a new adaptive compliant gripper is presented. This design of the gripper has embedded sensors as part of its structure. The use of embedded sensors in a robot gripper gives the control system the ability to control input displacement of the gripper and to recognize particular shapes of the grasping objects. Since the conventional control strategy is a very challenging task, fuzzy logic based controllers are considered as potential candidates for such an application. Fuzzy based controllers develop a control signal which yields on the firing of the rule base. The selection of the proper rule base depending on the situation can be achieved by using an ANFIS controller, which becomes an integrated method of approach for the control purposes. In the designed ANFIS scheme, neural network techniques are used to select a proper rule base, which is achieved using the back propagation algorithm. The simulation results presented in this paper show the effectiveness of the developed method.     

基于多层蚁群算法的变论域模糊控制

针对模糊控制器控制精度不高、自适应能力有限等问题,提出一种变论域自适应模糊控制方式.首先在对离散蚁群算法改进的基础上,提出用于连续域寻优的多层蚁群算法.其通过将解空间分成有限网格,并且算法在迭代过程中采用三个阶段的搜索策略,每个阶段采用异构搜索机制.然后根据系统性能利用改进算法动态调整伸缩因子,从而构成基于多层蚁群算法的变论域自适应模糊控制器.最后将此控制器用于中厚板液压位置伺服系统中.仿真结果表明,采用自适应模糊控制器的伺服系统收敛速度明显加快,此控制策略在适应能力与鲁棒性好于其它控制方式.     

Robust adaptive self-structuring fuzzy control design for nonaffine,nonlinear systems

In this article, a robust adaptive self-structuring fuzzy control (RASFC) scheme for the uncertain or ill-defined nonlinear, nonaffine systems is proposed. The RASFC scheme is composed of a robust adaptive controller and a self-structuring fuzzy controller. In the self-structuring fuzzy controller design, a novel self-structuring fuzzy system (SFS) is used to approximate the unknown plant nonlinearity, and the SFS can automatically grow and prune fuzzy rules to realise a compact fuzzy rule base. The robust adaptive controller is designed to achieve an L ₂ tracking performance to stabilise the closed-loop system. This L ₂ tracking performance can provide a clear expression of tracking error in terms of the sum of lumped uncertainty and external disturbance, which has not been shown in previous works. Finally, five examples are presented to show that the proposed RASFC scheme can achieve favourable tracking performance, yet heavy computational burden is relieved.     

A hybrid frequency—time domain adaptive fuzzy control scheme for flexible link manipulators

This paper addresses the implementation of an adaptive fuzzy controller for flexible link robot arms. The design technique is a hybrid scheme involving both frequency and time domain techniques. The eigenvalues of the open loop plant can be estimated through application of a frequency domain based identification algorithm. The region of the eigenvalue space, within which the system operates, is partitioned into fuzzy cells. Membership function are assigned to the fuzzy sets of the eigenvalue universe of discourse. The degree of uncertainty on the estimated eigenvalues is encountered through these membership functions. The knowledge data base consists of feedback gains required to place the closed loop poles at predefined locations. A rule based controller infers the control input variable weighting each with the value of the membership functions at the identified eigenvalue. The afore-mentioned controller is compared through simulation with conventional techniques, namely pole placement and gain scheduling.     

Decomposition of a fuzzy controller based on the inference break-up method

A concept called the decomposition of multivariable control rules is presented. Fuzzy control is the application of the compositional rule of inference and it is shown how the inference of the rule base with complex rules can be reduced to the inference of a number of rule bases with simple rules. A fuzzy logic based controller is applied to a simple magnetic suspension system. The controller has proportional, integral and derivative separate parts which are tuned independently. This means that all parts have their own rule bases. By testing it was found that the fuzzy PID controller gives better performance over a typical operational range then a traditional linear PID controller. The magnetic suspension system and the contact-less optical position measurement system have been developed and applied for the comparative analysis of the real-time conventional PID control and the fuzzy control.     

基于单神经元的参数自学习模糊控制器的研究

为进一步改善永磁交流伺服系统的动静态性能,该文设计了一种基于单神经元的参数自学习模糊控制器,它在控制规则数与二维控制器相当的基础上,可实现三维模糊控制的效果。引入的单神经元采用改进的BP算法来实现比例因子的在线自学习。控制器具有结构及算法简单、易于解析实现的特点。为验证其有效性,该文通过仿真试验,将其与采用常规的PI调节器的控制系统进行比较,结果表明,这种模糊控制器具有较好的控制效果。     

Mining the fuzzy control rules of aeration in a Submerged Biofilm Wastewater Treatment Process

This paper presents a special rule base extraction analysis for optimal design of an integrated neural-fuzzy process controller using an “impact assessment approach.” It sheds light on how to avoid some unreasonable fuzzy control rules by screening inappropriate fuzzy operators and reducing over fitting issues simultaneously when tuning parameter values for these prescribed fuzzy control rules. To mitigate the design efforts, the self-learning ability embedded in the neural networks model was emphasized for improving the rule extraction performance. An aeration unit in an Aerated Submerged Biofilm Wastewater Treatment Process (ASBWTP) was picked up to support the derivation of a solid fuzzy control rule base. Four different fuzzy operators were compared against one other in terms of their actual performance of automated knowledge acquisition in the system based on a partial or full rule base prescribed. Research findings suggest that using bounded difference fuzzy operator (O_b) in connection with back propagation neural networks (BPN) algorithm would be the best choice to build up this feedforward fuzzy controller design.     

MULTITUNING FUZZY CONTROL SYSTEMS DESIGN

A multituning fuzzy control system structure that involves two simple, but effective tuning mechanisms, is proposed: one is called fuzzy control rule tuning mechanism (FCRTM); the other is called dynamic scalar tuning mechanism (DSTM). In FCRTM, it is used to generate the necessary control rules with a center extension method. In DSTM, it contains three fuzzy IF-THEN rules for determining the appropriate scaling factors for the fuzzy control system. In this paper, a method based on the genetic algorithm (GA) is proposed to simultaneously choose the appropriate parameters in FCRTM and DSTM. That is, the proposed GA-based method can automatically generate the required rule base of fuzzy controller and efficiently determine the appropriate map for building the dynamic scalars of fuzzy controller. A multiobjective fitness function is proposed to determine an appropriate parameter set such that not only the selected fuzzy control structure has fewer fuzzy rules, but also the controlled system has a good control performance. Finally, an inverted pendulum control problem is given to illustrate the effectiveness of the proposed control scheme.     

Adaptive fuzzy controller with sliding surface for vehicle suspension control

Since the hydraulic actuating suspension system has nonlinear and time-varying behavior, it is difficult to establish an accurate model for designing a model-based controller. Here, an adaptive fuzzy sliding mode controller is proposed to suppress the sprung mass position oscillation due to road surface variation. This intelligent control strategy combines an adaptive rule with fuzzy and sliding mode control algorithms. It has online learning ability to deal with the system time-varying and nonlinear uncertainty behaviors, and adjust the control rules parameters. Only eleven fuzzy rules are required for this active suspension system and these fuzzy control rules can be established and modified continuously by online learning. The experimental results show that this intelligent control algorithm effectively suppresses the oscillation amplitude of the sprung mass with respect to various road surface disturbances.     

A new algorithm for decentralized adaptive control

A new algorithm for decentralized adaptive control is proposed in this paper. This algorithm consists of an ordinary local adaptive controller and a variable structure adaptive controller. The adaptive variable structure component of this algorithm is used to compensate for uncertain interconnections among the subsystems and to ensure global stability of the overall system. Simulation results are also presented to demonstrate the performance of the closed-loop control system     

列车自动驾驶调速系统自适应模糊控制

列车自动驾驶（ATO）系统停车前采取一级调速制动，本文采用自适应模糊控制对ATO系统的速度进行控制．利用变论域收缩因子优化模糊控制器的量化因子，模糊推理实现比例因子的自调整．通过仿真表明，该算法能够有效改善速度控制的快速性与精度，提高乘客舒适性与运行效率，从而完成定位停车任务．     

进化规划模糊算法在PID控制中的应用

针对非线性控制系统,利用进化规划模糊算法,对PID控制器规则基的参数进行离线优化,优化后的模糊控制规则可对系统实现实时控制。该控制算法无需任何先验知识和量化因子,具有很强的数据挖掘能力,且模糊规则基的寻优速度较快。通过对非线性系统进行仿真,验证了该算法的有效性,与传统固定参数PID控制方法及遗传算法整定参数PID控制方法相比,明显地提高了系统的稳定性和动态性能。     

网络控制系统Smith Fuzzy PID控制器的设计

针对网络控制系统中普遍存在的时延问题,提出了一种将模糊自适应算法和Smith预估补偿算法与常规PID控制器相结合的智能控制策略。该方法充分利用了Smith预估控制算法对带时延系统的良好控制能力,同时利用模糊推理算法实现对PID参数的在线自整定,进一步改善PID控制器的性能。仿真结果表明,基于该智能控制器的网络控制系统克服了传统PID控制超调量大及常规Smith预估补偿过分依赖于被控对象精确数学模型的缺陷,可以有效降低时延对系统性能的不利影响,使被控对象具有良好的动、静态特性。     

基于Elman神经网络的浓相输送模糊控制系统

由于粉末物料的浓相输送系统存在严重的非线性和时变性,故要想建立其准确数学模型难度非常大,本文提出了使用模糊神经网络控制系统,并对于模糊控制规则由Elman神经网络联想记忆后提取,它不但可以获得最佳控制规则,而且响应速度快并能够进行在线进行规则的修正。经仿真实验,该控制器能够对粉末物料流量在一定范围内进行协调优化时实控制。