Poly(ethylene 2,6-naphthalate)/layered silicate nanocomposites: fabrication, crystallization behavior and properties

In this study, poly(ethylene 2,6-naphthalate) (PEN)/layered silicate nanocomposites (PLSNs) were successfully prepared by the intercalation of PEN polymer into organically-modified layered montmorillonite through the melt blending process. Both X-ray diffraction data and transmission electron microscopy images of PEN/layered silicate nanocomposites indicate most of the swellable silicate layers were exfoliated and randomly dispersed into the PEN matrix. Mechanical and barrier properties of the fabricated nanocomposites performed by dynamic mechanical analysis and permeability analysis show significant improvements in the storage modulus and water permeability when compared to neat PEN. Differential scanning calorimeter (DSC) was used to investigate the isothermal crystallization behavior and melting behavior of PLSNs. DSC isothermal results revealed that the crystal growth process of PEN and PLSNs are a three-dimensional spherulitic growth. The activation energy of PEN increases with increasing content of layered silicates. The result indicates that the addition of layered silicate into PEN reduces the transportation ability of polymer chains during crystallization processes.     

Using maleic anhydride grafted poly(lactic acid) as a compatibilizer in poly(lactic acid)/layered‐silicate nanocomposites

The goal of this work was to prepare exfoliated poly(lactic acid) (PLA)/layered‐silicate nanocomposites with maleic anhydride grafted poly(lactic acid) (PLA–MA) as a compatibilizer. Two different layered silicates were used in the study: bentonite and hectorite. The nanocomposites were prepared by the incorporation of each layered silicate (5 wt %) into PLA via solution casting. X‐ray diffraction of the prepared nanocomposites indicated exfoliation of the silicates. However, micrographs from transmission electron microscopy showed the presence of intercalated and partially exfoliated areas. Tensile testing showed improvements in both the tensile modulus and yield strength for all the prepared nanocomposites. The results from the dynamic mechanical thermal analysis showed an improvement in the storage modulus over the entire temperature range for both layered silicates together with a shift in the tan δ peak to higher temperatures. The effect of using PLA–MA differed between the two layered silicates because of a difference in the organic treatment. The bentonite layered silicate showed a more distinct improvement in exfoliation and an increase in the mechanical properties because of the addition of PLA–MA in comparison with the hectorite layered silicate. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1852–1862, 2006     

Effect of organoclay chemistry and morphology on properties of poly(lactic acid) nanocomposites

Poly(lactic acid) (PLA) nanocomposites with different layered organoclays (variation in the surface treatment of silicate) and one special nanofiller (mixed mineral thixotrope) were melt-compounded using a semi-industrial co-rotating twin-screw extruder. Effects of the silicate surface treatment and shape on the structure as well on processing and utility properties in PLA matrix were investigated. The structural changes in polymer matrix were evaluated from dynamic experiments in the shear flow using low-amplitude oscillatory measurements. Moreover, new approach for morphological investigation of nanocomposites using small-angle X-ray scattering was presented. Concerning utility properties, tests of mechanical and barrier properties were performed to compare enhancement of PLA matrix due to incorporation of different nanoparticles. Surprisingly, filling the PLA matrix with mixed mineral thixotrope resulted into very high material performance (in particular, significant improvement in barrier properties) compared to filling with commercial layered silicates. In this way, new type of nanofiller for PLA applications has been successfully tested.     

生物可降解聚乳酸/层状硅酸盐纳米复合材料的研究进展

生物可降解聚乳酸是一种具有广泛应用前景的环境友好型的生物高分子材料,但是其力学性能、热稳定性能不稳定.利用层状硅酸盐的特殊结构,以各种有机改性的层状硅酸盐为添加物,通过原位插层聚合、溶液插层、熔融插层和剥离.吸附等方法制备生物可降解聚乳酸/层状硅酸盐纳米复合材料,其力学性能、热稳定性、生物降解性等均有显著提高,其展现出极其广阔的应用前景.本文概述了近年来生物可降解聚乳酸/层状硅酸盐纳米复合材料的制备、结构、性能和应用等方面的研究进展,并且对各种制备方法进行了分析比较.     

Characterization and electrical conductivity of poly(ethylene glycol)/polyacrylonitrile/multiwalled carbon nanotube composites

Poly(Lactic acid) (PLA)‐layered silicate nanocomposite films were prepared by solvent casting method. The films were irradiated with Co⁶⁰ radiation facility at dose of 30 kGy. The effect of γ irradiation on mechanical properties of the neat PLA and nanocomposites was evaluated by data obtained from tensile testing measurements. The tensile strength of the irradiated PLA films increased with addition of 1 wt % triallyl cyanurate indicating crosslink formation. Significant ductile behavior was observed in the PLA nanocomposites containing 4 pph of nanoclay. Incorporation of nanoclay particles in the PLA matrix stimulated crystal growth as it was studied by differential scanning calorimetry. The morphology of the nanocomposites characterized by transmission electron microscopy and X‐ray diffraction revealed an exfoliated morphology in the PLA nanocomposite films containing 4 pph of nanoclay. Only very small changes were observed in the chemical structure of the irradiated samples as it was investigated by Fourier transform infrared spectroscopy. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effect of the compatibilizing agent on the structure,mechanical and thermal properties of polylactide filled with modified and unmodified montmorillonite

Polylactide (PLA) nanocomposites were prepared by an extrusion technique using a twin‐screw extruder. Nanofil2 (N) and montmorillonite (MMT) K10 (S) were used as nanoclays. To improve the nanoclay dispersion in the PLA matrix, a compatibilizer was introduced [poly(ε‐caprolactone) (K)]. The structure and morphology of obtained materials were determined using X‐ray diffraction technique and transmission electron microscopy. Thermal properties of nanocomposites were reviewed based on differential scanning calorimetry and differential thermogravimetry. Mechanical properties such as tensile stress and tensile strength were also studied. The introduction of layered silicates without a compatibilizer into PLA matrix did not improve the mechanical properties of the obtained nanocomposites. This research indicated that the compatibilizing agent can be used to improve the dispersion of Nanofil2 nanofiller, which resulted in the improvement of mechanical properties and at the same time did not affect the dispersion of the unmodified MMT. POLYM. COMPOS., 35:1330–1337, 2014. © 2013 Society of Plastics Engineers     

Mechanical,thermal, and morphological properties of injection molded poly(lactic acid)/SEBS‐g‐MAH/organo‐montmorillonite nanocomposites

Poly(lactic acid)/organo‐montmorillonite (PLA/OMMT) nanocomposites toughened with maleated styrene‐ethylene/butylene‐styrene (SEBS‐g‐MAH) were prepared by melt‐compounding using co‐rotating twin‐screw extruder followed by injection molding. The dispersibility and intercalation/exfoliation of OMMT in PLA was characterized using X‐ray diffraction and transmission electron microscopy (TEM). The mechanical properties of the PLA nanocomposites was investigated by tensile and Izod impact tests. Thermogravimetric analyzer and differential scanning calorimeter were used to study the thermal behaviors of the nanocomposite. The homogenous dispersion of the OMMT silicate layers and SEBS‐g‐MAH encapsulated OMMT layered silicate can be observed from TEM. Impact strength and elongation at break of the PLA nanocomposites was enhanced significantly by the addition of SEBS‐g‐MAH. Thermal stability of the PLA/OMMT nanocomposites was improved in the presence of SEBS‐g‐MAH. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Tuning the Mechanical Properties of Poly(Methyl Acrylate) via Surface-Functionalized Montmorillonite Nanosheets

Polymer layered silicate nanocomposites (PLSNs) made of montmorillonite (MMT) nanosheets and poly(methyl acrylate) (PMA) are synthesized and systematically characterized. MMT is first modified with a surface-bound monomer and then functionalized with PMA via radical addition–fragmentation chain transfer (RAFT) polymerization using a grafting through approach. PMA-modified MMT nanosheets with grafted polymer chains of variable length are obtained. The successful surface modification is demonstrated by near-field scanning optical microscopy, thermogravimetric analysis, attenuated total reflection Fourier transform infrared spectroscopy, small-angle X-ray scattering, and size-exclusion chromatography. The mechanical properties of various nanocomposites are evaluated via tensile testing. It can be shown that the mechanical properties (Young's modulus, tensile strength, toughness, and ductility) of these PLSNs can be fully controlled by using two major strategies, i.e., by the variation of the overall content of polymer-modified MMT and by the variation of the chain length of the surface-grafted polymer.     

Preparation and biodegradation of clay composites of PLA

PurposePerspective applications of nanocomposites in biomedical applications are investigated in this work by producing intercalated dispersions of clays into a biodegradable polymer matrix. Poly(lactic acid) (PLA) was selected being produced from renewable resources and approved by the Food and Drug Administration for medical use.In order to improve PLA mechanical properties and to accelerate its degradation, different layered silicate nanoclays are added: montmorillonites and fluorohectorites, without or with organic modifiers. Preparation, characterization, mechanical properties and biodegradation in blood plasma are evaluated.ResultsNew biodegradable materials were obtained, with improved mechanical properties (Young modulus, Peak stress and Strain at break) and with increased degradation rate (weight loss and lactic acid release).     

Rheological behavior of polypropylene/layered silicate nanocomposites prepared by melt compounding in shear and elongational flows

Melt rheology and processability of exfoliated polypropylene (PP)/layered silicate nanocomposites were investigated. The nanocomposites were prepared by melt compounding process in the presence or absence of a PP‐based maleic anhydride compatibilizer. PP/layered silicate nanocomposites showed typical rheological properties of exfoliated nanocomposites such as nonterminal solid‐like plateau behavior at low frequency region in oscillatory shear flow, higher steady shear viscosity at low shear rate region, and outstanding strain hardening behavior in uniaxial elongational flow. The melt processability of exfoliated PP/layered silicate nanocomposites was significantly improved due to good dispersion of layered silicates and increased molecular interaction between the PP matrix and the layered silicate organoclay. Small‐angle X‐ray scattering and transmission electron microscopy results revealed that the layered silicate organoclay was exfoliated and good interaction between PP matrix and organoclay was achieved by using the PP‐g‐MAH compatibilizer. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3506–3515, 2007     

Characterization of polymer‐layered silicate (clay) nanocomposites by transmission electron microscopy and X‐ray diffraction: A comparative study

Several polymer‐layered silicate (clay) nanocomposites (PLSNs) were analyzed by transmission electron microscopy (TEM) and wide‐angle X‐ray diffraction (XRD) in an effort to characterize the nanoscale dispersion of the layered silicate. The PLSNs investigated included thermoset (cyanate esters) and thermoplastic polymers (polystyrene, nylon 6, and polypropylene‐g‐maleic anhydride). The results of this study reveal that the overall nanoscale dispersion of the clay in the polymer is best described by TEM, especially when mixed morphologies are present. XRD is useful for the measurement of d‐spacings in intercalated systems but cannot always observe low clay loadings (<5%) or be used as a method to identify an exfoliated nanocomposite where no XRD peaks are present (constituting a negative result). Most importantly, the study showed that XRD is not a stand‐alone technique, and it should be used in conjunction with TEM. Our studies suggest that new definitions, or a clarification of existing definitions, are needed to properly describe the diversity of PLSN nanostructures seen in various materials. Published 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1329–1338, 2003     

Poly(lactic acid) and layered silicate nanocomposites prepared by melt mixing: Thermomechanical and morphological properties

Poly(lactic acid) (PLA) nanocomposites were prepared by melt mixing technique in a Haake batch mixer. The clay dispersion within the PLA matrix during melt mixing was well explained through the morphological characterization. Morphological characterizations were studied by X‐ray diffraction and transmission electron microscopy. The exfoliation/intercalation of the clay particles within the polymer matrix during melt mixing depends on the mixing torque generated during the preparation of nanocomposites. The significance of processing temperature and the mixing time in melt mixing were studied for PLA/C93A and PLA/C30B nanocomposites. The structure and properties of the nanocomposites were also characterized by differential scanning calorimetry, thermogravimetric analysis, dynamic mechanical analysis, and mechanical properties by standard tensile testing. The incorporation of nanoclays into the PLA matrix enhanced the mechanical properties and thermal stability of the PLA nanocomposites. This may be due to the reinforcing effect of nanoclays within the polymer matrix. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Synthesis and properties of poly(methyl methacrylate)/montmorillonite (PMMA/MMT) nanocomposites

PMMA/MMT nanocomposites were successfully synthesized via in situ intercalative polymerization, and characterized by means of wide‐angle X‐ray diffractometry, transmission electron microscopy, thermal gravimetric analysis, dynamic mechanical analysis and Fourier‐transform infrared analysis. The nanocomposites possess partially exfoliated and partially intercalated structure, in which the silicate layers are exfoliated into nanometre secondary particles with thickness of less than 20 nm and uniformly dispersed in the polymer matrix. In comparison with pure PMMA, the thermal stability, glass transition temperature, and mechanical properties of the polymer are notably improved by the presence of the nanometric silicate layers. It was found that part of the PMMA chains in the nanocomposites are well immobilized inside and/or onto the layered silicates and, therefore, the unique properties of the nanocomposites result from the strong interactions between the nanometric silicate layers and the polymer chains. Copyright © 2003 Society of Chemical Industry     

Structure and performance of poly (lactic acid)/amide ethylenediamine tetraacetic acid disodium salt intercalation layered double hydroxides nanocomposites

Modified layered double hydroxides (E-LDHs) were successfully prepared by the intercalation of ethylenediamine tetraacetic acid disodium salt (EDTA). Then, amide EDTA intercalation layered double hydroxides (AE-LDHs) were synthesized using aniline. The structure characterization of AE-LDHs demonstrated that AE-LDHs was successfully amidified. To enhance the properties of poly (lactic acid) (PLA), PLA/AE-LDHs nanocomposites were prepared by using AE-LDHs as the nucleating agent. Mechanical properties, thermal stabilities and crystallization properties of PLA/AE-LDHs nanocomposites were investigated by thermogravimetric analysis (TG), differential scanning calorimetry (DSC), polarized optical microscopy (POM), and rheological behavior analysis. Results of mechanical properties and TG analysis showed that mechanical properties, thermal stabilities of PLA/AE-LDHs nanocomposites were improved significantly compared to pure PLA. Differential scanning calorimetry (DSC) demonstrated that AE-LDHs restricted the cold crystallization of PLA matrix and improved the crystallinity of PLA by 30.15%. POM analysis showed that AE-LDHs acted as an excellent nucleating agent, which greatly increased the crystallization rate of PLA. Compared with pure PLA, the maximum torque and apparent viscosity of PLA/AE-LDHs nanocomposites were improved by 46.21% and 85.86%, respectively, which proved that the AE-LDHs increased the rigidity of network structure of PLA matrix. In this work, an efficient and feasible nucleating agent for improving the crystallinity of PLA was presented through the amidation of LDHs.     

New polylactide/layered silicate nanocomposites. 5. Designing of materials with desired properties

Understanding the structure/property relationship in polymer/layered silicate nanocomposites is of great importance in designing materials with desired properties. In order to understand these relations, a series of polylactide (PLA)/organically modified layered silicate (OMLS) nanocomposites have been prepared using a simple melt extrusion technique. Four different types of OMLS have been used for the preparation of nanocomposites, three were modified with functionalized ammonium salts while fourth one was a phosphonium salt modified OMLS. The structure of the nanocomposites in the nanometer scale was characterized by using wide-angle X-ray diffraction and transmission electron microscopic observations. Using four different types of layered silicates modified with four different types of surfactants, the effect of OMLS in nanocomposites was investigated by focusing on four major aspects: structural analysis, thermal properties and spherulite morphology, materials properties, and biodegradability. Finally, we draw conclusions about the structure/property relationship in the case of PLA/OMLS nanocomposites.     

Enhanced mechanical and thermal properties of PS/mica and PMMA/mica nanocomposites by emulsion polymerization

Polymer/mica nanocomposites of styrene or methyl methacrylate have been prepared by emulsion polymerization. For the polymer/mica nanocomposites, the mica was dispersed individually in water, and we found that they were adsorbed on the surface of monomer droplets. Polymer/mica nanocomposites were obtained by adding an aqueous dispersion of layered silicate into the polymer emulsion. X‐ray diffraction (XRD) and FTIR spectra were used to characterize the structures of the nanocomposites. The degree of dispersion of these nanocomposites were investigated by using a transmission electron microscopy (TEM). Furthermore, the thermal and mechanical properties of polymer/mica nanocomposites were determined by using thermogravimetric analysis (TGA), differential scanning calorimeter (DSC), and dynamic mechanical analysis (DMA). The increased tan δ of the obtained nanocomposites is ascribed to the fine dispersion of mica particles into the polymer matrix. POLYM. COMPOS., 2009. © 2009 Society of Plastics Engineers     

Preparation and properties of new EPDM/vermiculite nanocomposites

Novel nanocomposites based on ethylene‐propylene‐diene rubber (EPDM) and maleic anhydride‐modified vermiculite (VMT) were prepared. Maleic anhydride (MA) acts both as the intercalation agent for VMT and as a vulcanizing agent for EPDM matrix. It also acts as a compatibilizer for EPDM and VMT phases. From analysis by X‐ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), the silicate layers of the VMT were exfoliated and dispersed uniformly in the EPDM matrix as monolayers. The thermal properties of the nanocomposites were investigated by dynamic mechanical thermal analysis and thermogravimetric analysis; a strong rubber‐filler interaction in the nanocomposites was manifested in the measured temperature range by the result of storage modulus. At the same time, there was some enhancement in degradation behavior between the nanocomposites and EPDM matrix. The nanocomposites exhibited a great improvement in tensile strength and modulus, as well as elongation at break. Finally, the effects of MA addition on the formation of nanometric reinforcement and on the mechanical properties of nanocomposites are discussed. POLYM. COMPOS., 26:706–712, 2005. © 2005 Society of Plastics Engineers     

Polymer layered silicate nanocomposites

Polymers filled with low amounts of layered silicate dispersed at nanoscale level are most promising materials characterized by a combination of chemical, physical and mechanical properties that cannot be obtained with macro‐ or microscopic dispersions of inorganic fillers. Polymer layered silicate nanocomposites can be obtained by insertion of polymer molecules in the galleries between the layers of phyllosilicate. Here, hydrated alkaline or alkaline earth metal cations are hosted which neutralize the negative charge resulting from isomorphous substitutions of Mg or Al cations within the silicate. Insertion of polymer molecules to prepare “intercalation hybrids” can be carried out by replacing the water hydration molecules in the galleries by polymers containing polar functional groups, using the so called ion‐dipole method. A more general technique involves compatibilization of the silicate by intercalation of an organic molecule, typically an organic alkylammonium salt, that replaces the cations in the interlayer galleries to form an organically modified layered silicate (OLS). The aliphatic chain of the OLS favors the intercalation of any type of polymer. Intercalated or delaminated polymer‐silicate hybrids are obtained depending on whether the stack organization of the silicate layers is preserved or is lost, with single sheets being distributed in the polymer matrix. The methods currently used for preparing polymer layered silicate (PLS) nanocomposites are: in situ polymerization, from polymer solution, or from polymer melt. Although PLS nanocomposites have been known for a long time, it is the possibility of preparing them by melt intercalation of OLS in processing that is boosting the present interest in these materials and their properties. So far PLS nanocomposites have been characterized by X‐ray diffractometry, transmission electron microscopy, differential scanning calorimetry, and NMR. Published results on PLS nanocomposites are reviewed concerning their characterization and properties with particular reference to fire retardant behavior.     

Biodegradable polyester layered silicate nanocomposites based on poly(ϵ‐caprolactone)

Nanocomposites based on biodegradable poly(?‐caprolactone) (PCL) and layered silicates (montmorillonite, MMT) were prepared either by melt interaction with PCL or by in situ ring‐opening polymerization of ?‐caprolactone as promoted by the so‐called coordination‐insertion mechanism. Both non‐modified clays (Na⁺ ‐MMT) and silicates modified by various alkylammonium cations were studied. Mechanical and thermal properties were examined by tensile testing and thermogravimetric analysis. Even at a filler content as low as 3 wt% of inorganic layered silicate, the PCL‐layered silicate nanocomposites exhibited improved mechanical properties (higher Young's modulus) and increased thermal stability as well as enhanced flame retardant characteristics as a result of a charring effect. It was shown that the formation of PCL‐based nanocomposites depended not only on the nature of the ammonium cation and related functionality but also on the selected synthetic route, melt intercalation vs. in situ intercalative polymerization. Interestingly enough, when the intercalative polymerization of ?‐caprolactone was carried out in the presence of MMT organo‐modified with ammonium cations bearing hydroxyl functions, nanocomposites with much improved mechanical properties were recovered. Those hybrid polyester layered silicate nanocomposites were characterized by a covalent bonding between the polyester chains and the clay organo‐surface as a result of the polymerization mechanism, which was actually initiated from the surface hydroxyl functions adequately activated by selected tin (II) or tin (IV) catalysts.     

Preparation and properties of natural rubber nanocomposites with solid‐state organomodified montmorillonite

A novel organomodified montmorillonite prepared by solid‐state method and its nanocomposites with natural rubber were studied. The nanocomposites were prepared by traditional rubber mixing and vulcanizing process. The properties of solid‐state organomodified montmorillonite were investigated by Fourier‐transform infrared spectroscopy (FITR) and thermogravimetric analysis (TGA). The dispersion of the layered silicate in rubber matrix was characterized by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The results showed that the nanocomposites consisting of solid‐state organomodified montmorillonite and natural rubber are obtained. The solid‐state organomodified montmorillonite can not only accelerate the curing process, but also improve the mechanical and aging resistance properties of NR. The properties improvement caused by the fillers are attributed to partial intercalation of the organophilic clay by NR macromolecules. In addition, the dynamic mechanical analysis (DMA) results showed a decrease of tanδmax and increase of T_g when the organoclay is added to the rubber matrix, which is due to the confinement of the macromolecular segments into the organoclay nanolayers and the strong interaction between the filler and rubber matrix. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008