Influence of 3‐D cross‐talk on qualified viewing spaces in two‐ and multi‐view autostereoscopic displays

Abstract— To estimate the qualified viewing spaces for two‐ and multi‐view autostereoscopic displays, the relationship between image quality (image comfort, annoying ghost image, depth perception) and various pairings between 3‐D cross‐talk in the left and right views are studied subjectively using a two‐view autostereoscopic display and test charts for the left and right views with ghost images due to artificial 3‐D cross‐talk. The artificial 3‐D cross‐talk was tuned to simulate the view in the intermediate zone of the viewing spaces. It was shown that the stereoscopic images on a two‐view autostereoscopic display cause discomfort when they are observed by the eye in the intermediate zone between the viewing spaces. This is because the ghost image due to large 3‐D cross‐talk in the intermediate zone elicits different depth perception from the depth induced by the original images for the left and right views, so the observer's depth perception is confused. Image comfort is also shown to be better for multi‐views, especially the width of the viewing space, which is narrower than the interpupillary distance, where the parallax of the cross‐talking image is small.     

Invited Paper: Depth reproducibility of multiview depth‐fused 3‐D display

Abstract— A multi‐view depth‐fused 3‐D (DFD) display that provides smooth motion parallax for wide viewing angles is proposed. A conventional DFD display consists of a stack of two transparent emitting screens. It can produce motion parallax for small changes in observation angle, but its viewing zone is rather narrow due to the split images it provides in inclined views. On the other hand, even though multi‐view 3‐D displays have a wide viewing angle, motion parallax in them is discrete, depending on the number of views they show. By applying a stacked structure to multi‐view 3‐D displays, a wide‐viewing‐angle 3‐D display with smooth motion parallax was fabricated. Experimental results confirmed the viewing‐zone connection of DFD displays while the calculated results show the feasibility of stacked multi‐view displays.     

Development of a 42‐in. 2‐D/3‐D switchable display using multi‐view technology for public‐information‐display applications

Abstract— A 42‐in. 2‐D/3‐D switchable display operating in a parallax‐barrier‐type system consisting of liquid‐crystal displays (LCDs) has been developed. The system displays 2‐D images in full resolution, without any degradation to the original 2‐D images, and 3‐D autostereoscopic images with resolutions higher than SVGA with wide viewing zones electrically controlled by the parallax‐barrier system. The system is intended for use in public‐information displays (PIDs), a booming field, and as displays for gaming, medical, and simulation applications.     

Efficiency analysis for multi‐view spatially multiplexed autostereoscopic 2‐D/3‐D displays

Abstract— The wide‐viewing freedom often requested by users of autostereoscopic displays can be delivered by spatial multiplexing of multiple views in which a sequence of images is directed into respective directions by a suitable autostereoscopic optical system. This gives rise to two important design considerations — the optical efficiency and the resolution efficiency of the device. Optical efficiency is particularly important in portable devices such as cell phones. A comparison is given between lens and barrier systems for various spatial multiplexing arrangements. Parallax‐barrier displays suffer from reduced optical efficiency as the number of views presented increases whereas throughput efficiency is independent of the number of views for lens displays. An autostereoscopic optical system is presented for the emerging class of highly efficient polarizer‐free displays. Resolution efficiency can be evaluated by investigating quantitative and subjective comparisons of resolution losses and pixel appearance in each 3‐D image. Specifically, 2.2‐in.‐diagonal 2‐D/3‐D panel performance has been assessed using Nyquist boundaries, human‐visual contrast‐sensitivity models, and autostereoscopic‐display optical output simulations. Four‐view vertical Polarization‐Activated Microlens technology with either QVGA mosaic or VGA striped pixel arrangements is a strong candidate for an optimum compromise between display brightness, viewing angle, and 3‐D pixel appearance.     

Depth image‐based rendering for multiview generation

Abstract— Techniques for 3‐D display have evolved from stereoscopic 3‐D systems to multiview 3‐D systems, which provide images corresponding to different viewpoints. Currently, new technology is required for application in multiview display systems that use input‐source formats such as 2‐D images to generate virtual‐view images of multiple viewpoints. Due to the changes in viewpoints, occlusion regions of the original image become disoccluded, resulting in problems related to the restoration of output image information that is not contained in the input image. In this paper, a method for generating multiview images through a two‐step process is proposed: (1) depth‐map refinement and (2) disoccluded‐area estimation and restoration. The first step, depth‐map processing, removes depth‐map noise, compensates for mismatches between RGB and depth, and preserves the boundaries and object shapes. The second step, disoccluded‐area estimation and restoration, predicts the disoccluded area by using disparity and restores information about the area by using information about neighboring frames that are most similar to the occlusion area. Finally, multiview rendering generates virtual‐view images by using a directional rendering algorithm with boundary blending.     

Optical simulation for cross‐talk evaluation and improvement of autostereoscopic 3‐D displays with a projector array

Abstract— Multi‐view spatial‐multiplexed autostereoscopic 3‐D displays normally use a 2‐D image source and divide the pixels to generate perspective images. Due to the reduction in the resolution of each perspective image for a large view number, a super‐high‐resolution 2‐D image source is required to achieve 3‐D image quality close to the standard of natural vision. This paper proposes an approach by tiling multiple projection images with a low magnification ratio from a microdisplay to resolve the resolution issue. Placing a lenticular array in front of the tiled projection image can lead to an autostereoscopic display. Image distortion and cross‐talk issues resulting from the projection lens and pixel structure of the microdisplay have been addressed with proper selection of the active pixel and adequate pixel grouping and masking. Optical simulation has shown that a 37‐in. 12‐view autostereoscopic display with a full‐HD (1920 × 1080) resolution can be achieved with the proposed 3‐D architecture.     

MUTED: Multi‐user 3‐D display

Abstract— Research described in this paper encompasses the design and building of glasses‐free (autostereoscopic) displays that utilize a direct‐view liquid‐crystal display whose backlight is provided by a projector and novel steering optics. This is controlled by the output of a multi‐user head‐position tracker. As the displays employ spatial multiplexing on a liquid‐crystal‐display screen, they are inherently 2‐D/3‐D switchable with 2‐D being achieved by simply displaying the same image in the left and right channels. Two prototypes are described in this paper; one incorporating a holographic projector and the other a conventional LCOS projector. The LCOS projector version addresses the limitations of brightness, cross‐talk, banding in the images, and laser stability that occur in the holographic projector version. The future development is considered and a comparison between the prototypes and with other 3‐D displays is given.     

High‐resolution autostereoscopic 3‐D projection display with a space‐dividing iris‐plane shutter

Abstract— A high‐resolution autostereoscopic 3‐D projection display with a polarization‐control space dividing the iris‐plane liquid‐crystal shutter is proposed. The polarization‐control iris‐plane shutter can control the direction of stereo images without reducing the image quality of the microdis‐play. This autostereoscopic 3‐D projection display is 2‐D/3‐D switchable and has a high resolution and high luminance. In addition, it has no cross‐talk between the left and right viewing zones, a simple structure, and the capability to show multi‐view images.     

Viewpoint image generation for head tracking 3D display using multi‐camera and approximate depth information

A simple and high image quality method for viewpoint image synthesis from multi‐camera images for a stereoscopic 3D display using head tracking is proposed. In this method, slices of images for depth layers are made using approximate depth information, the slices are linearly blended corresponding to the distance between the viewpoint and cameras at each layer, and the layers are overlaid from the perspective of viewpoint. Because the linear blending automatically compensates for depth error because of the visual effects of depth‐fused 3D (DFD), the resulting image is natural to observer's perception. Smooth motion parallax of wide depth range objects induced by viewpoint movement for left‐and‐right and front‐and‐back directions is achieved using multi‐camera images and approximate depth information. Because the calculation algorithm is very simple, it is suitable for real time 3D display applications.     

Prototyping and optical evaluation of 9‐in. OCB time‐division‐multiplexing 18‐view 3‐D display

Abstract— An integral imaging time‐division‐multiplexing 18‐view 3‐D display based on the one‐dimensional integral‐imaging (1‐D‐II) technique using a 9‐in. OCB‐LCD, lenticular sheet, and active shutter has been developed. By simulating a lens shape and a shutter structure and analyzing the light‐beam profile of the increasing‐parallax‐number region to find the best conditions, depth range, and viewing angle were an enhanced and a brighter and flicker‐less 3‐D image with smooth motion parallax was obtained.     

3‐D crosstalk and luminance uniformity from angular luminance profiles of multiview autostereoscopic 3‐D displays

Abstract— Autostereoscopic 3‐D display technologies enable a more immersive media experience by adding real depth to the visual content. However, the method used for the creation of a sensation of depth or stereo illusion contains several display design and content‐related issues that need to be carefully considered to maintain sufficient image quality. Conventionally, methods used for 3‐D image‐quality evaluations have been based on subjective testing. Optical measurements, in addition to subjective testing, can be used as an efficient tool for 3‐D display characterization. Objective characterization methods for autostereoscopic displays have been developed. How parameters affecting stereo image quality can be defined and measured, and how their effect on the stereo image quality can be evaluated have been investigated. Developed characterization methods are based on empirically gathered data. In this paper, previously presented methodology for two‐view displays is extended to cover autostereoscopic multiview displays. A distinction between displays where the change in content occurs in clear steps when the user moves in front of the display, and displays where the apparent movement of the objects is more continuous as a function of the head movement is made. Definitions for 3‐D luminance and luminance uniformity, which are equally important, as well as 3‐D crosstalk, which is the dominant factor in the evaluations of the perceived 3‐D image quality, is focused upon.     

3‐D mobile display based on dual‐directional light guides with a fast‐switching liquid‐crystal panel

Abstract— An autostereoscopic display based on dual‐directional light guides with a fast‐switching liquid‐crystal panel was designed and fabricated to provide better 3‐D perception with image qualities comparable to that of 2‐D displays. With two identical micro‐grooved light guides, each with a light‐controlled ability in one direction, two restricted viewing cones are formed to project pairs of parallax images to the viewer's respective eyes sequentially. Crosstalk of less than 10% located within ±8°–±30° and an LC response time of 7.1 msec for a 1.8‐in. LCD panel can yield acceptable 3‐D perceptions at viewing distance of 5.6–23 cm. Moreover, 2‐D/3‐D compatibility is provided in this module.     

Psychophysical evaluations of a current multi‐view 3‐D display: Its advantages in glossiness reproduction

Abstract— Although two‐view 3‐D displays requiring stereo glasses are on the market, the shape of objects they present is distorted when the observer's head moves. This problem can be solved by using a (passive) multi‐view 3‐D display because such a display can produce motion parallax. Another problem has to do with the surface quality of the presented object, but little is known about the fidelity of such displays as far as the surface quality goes. Previously, it was found that a two‐view 3‐D display has a problem in which glossiness deteriorates when the observer's head moves and that it can be alleviated by using a head tracker, whose data enables the display to produce correct motion parallax and luminance changes when the viewer's head moves. Here, it was determined whether this problem can be solved by using commercially available multi‐view 3‐D displays, whose finite number of viewpoints and certain amount of cross‐talk, however, make luminance changes inexact and smaller than they should be. It was found that this display can solve the problem to a certain extent.     

Virtual toed‐in camera method to eliminate parallax distortions of stereoscopic images for stereoscopic displays

Abstract— The parallax images captured by a toed‐in camera have positive and negative horizontal parallax for stereoscopic displays, but they also have parallax distortions including horizontal and vertical distortions. The virtual toed‐in camera method can eliminate the horizontal distortion and reduce the vertical distortion. The parallax formulae for the corrected‐parallax images were deduced. The experiments were carried out and the results proved that the method was accurate. Good stereoscopic images without horizontal distortion and with little vertical distortion were presented on an autostereoscopic display.     

Practical implementation of a depth‐feeling‐enhanced two‐plane electro‐floating display system using three‐dimensional integral images

Abstract— Although there are numerous types of floating‐image display systems which can project three‐dimensional (3‐D) images into real space through a convex lens or a concave mirror, most of them provide only one image plane in space to the observer; therefore, they lack an in‐depth feeling. In order to enhance a real 3‐D feeling of floating images, a multi‐plane floating display is required. In this paper, a novel two‐plane electro‐floating display system using 3‐D integral images is proposed. One plane for the object image is provided by an electro‐floating display system, and the other plane for the background image is provided with the 3‐D integral imaging system. Consequently, the proposed two‐plane electro‐floating display system, having a 3‐D background, can provide floated images in front of background integral images resulting in a different perspective to the observer. To show the usefulness of the proposed system, experiments were carried out and their results are presented. In addition, the prototype was practically implemented and successfully tested.     

A common approach to characterizing autostereoscopic and polarization‐based 3‐D displays

Abstract— Autostereoscopic and polarization‐based stereoscopic 3‐D displays recreate 3‐D images by providing different images in the two eyes of an observer. This aim is achieved differently for these two families of 3‐D displays. It is shown that viewing‐angle measurements can be applied to characterize both types of displays. Viewing‐angle luminance measurements are made at different locations on the display surface for each view emitted by the display. For autostereoscopic displays, a Fourier‐optics instrument with an ultra‐high‐angular‐resolution VCMaster3D is used. For polarization‐based displays, a standard Fourier‐optics instrument with additional glass filters is used. Then, what will be seen by an observer in front of the display is computed. Monocular and binocular quality criteria (left‐ and right‐eye contrast, 3‐D contrast) was used to quantify the ability to perceive depth for any observer position. Qualified monocular and binocular viewing spaces (QMVS and QBVS) are deduced. Precise 3‐D characteristics are derived such as maximum 3‐D contrast, optical viewing freedom in each direction, color shifts, and standard contrast. A quantitative comparison between displays of all types becomes possible.     

A high‐resolution autostereoscopic display system with a wide viewing angle using an LCOS projector array

Abstract— This study develops an autostereoscopic display based on a multiple miniature projector array to provide a scalable solution for a high‐resolution 3‐D display with large viewing freedom. To minimize distortion and dispersion, and to maximize the modulation transfer function (MTF) of the projection image to optimize 3‐D image quality, a dedicated projection lens and an accurate six‐axis adjusting platform for the miniature projector were designed and fabricated. Image‐blending technology based on a lookup table was adopted to combine images from 30 miniature projectors into a seamless single image. The result was a 35‐in. autostereoscopic display with 60 views ata 30° viewing angle, 90° FOV, and large range of viewing distance. The proposed system exhibits very smooth motion parallax when viewers move around in front of it.     

Characterizing image quality of autostereoscopic displays by using the maximum luminance at each viewing position

A metric of the 3D image quality of autostereoscopic displays based on optical measurements is proposed. This metric uses each view's luminance contrast, which is defined as the ratio of maximum luminance at each viewing position to total luminance at that position. Conventional metrics of the autostereoscopic display based on crosstalk, which uses “wanted” and “unwanted” lights. However, in case of the multiple‐views‐type autostereoscopic displays, it is difficult to distinguish exactly which lights are wanted lights and which are unwanted lights. This paper assumes that the wanted light has a maximum luminance at the good stereoscopic viewing position, and the unwanted light also has a maximum luminance at the worst pseudo‐stereoscopic viewing position. By using the maximum luminance that is indexed by view number of the autostereoscopic display, the proposed method enables characterizing stereoscopic viewing conditions without using wanted/unwanted light. A 3D image quality metric called “stereo luminance contrast,” the average of both eyes' contrast, is proposed. The effectiveness of the proposed metric is confirmed by the results of optical measurement analyses of different types of autostereoscopic displays, such as the two‐view, scan‐backlight, multi‐view, and integral.     

Projection‐based head‐tracking 3‐D displays

Abstract— This paper describes the construction and operation of four 3‐D displays in which each display produces two images for each eye and thus fits into the category of projection‐based binocular stereoscopic displays. The four 3‐D displays described are pico‐projector‐based, liquid‐ crystal—on—silicon (LCOS) conventional projector‐based, 120‐Hz digital‐light‐processor (DLP) projector‐ based, and the HELIUM3D system. In the first three displays, images are produced on a direct‐view LCD whose conventional backlight is replaced with a projection illumination source that is controlled by a multi‐user head tracker; novel steering optics direct the projector output to regions referred to as exit pupils located at the viewers' eyes. In the HELIUM3D display, the image information is supplied by a horizontally scanned, fast, light valve whose output is controlled by a spatial light modulator (SLM) to direct images to the appropriate viewers' eyes. The current statu s and the multimodal potential of the HELIUM3D display are described.     

Video 2‐D—to—3‐D conversion based on hybrid depth cueing

Abstract— With the maturation of three‐dimensional (3‐D) technologies, display systems can provide higher visual quality to enrich the viewer experience. However, the depth information required for 3‐D displays is not available in conventional 2‐D recorded contents. Therefore, the conversion of existing 2‐D video to 3‐D video becomes an important issue for emerging 3‐D applications. This paper presents a system which automatically converts 2‐D videos to 3‐D format. The proposed system combines three major depth cues: the depth from motion, the scene depth from geometrical perspective, and the fine‐granularity depth from the relative position. The proposed system uses a block‐based method incorporating a joint bilateral filter to efficiently generate visually comfortable depth maps and to diminish the blocky artifacts. By means of the generated depth map, 2‐D videos can be readily converted into 3‐D format. Moreover, for conventional 2‐D displays, a 2‐D image/video depth perception enhancement application is also presented. With the depth‐aware adjustment of color saturation, contrast, and edge, the stereo effect of the 2‐D content can be enhanced. A user study on subjective quality shows that the proposed method has promising results on depth quality and visual comfort.