Invited Paper: Depth reproducibility of multiview depth‐fused 3‐D display

Abstract— A multi‐view depth‐fused 3‐D (DFD) display that provides smooth motion parallax for wide viewing angles is proposed. A conventional DFD display consists of a stack of two transparent emitting screens. It can produce motion parallax for small changes in observation angle, but its viewing zone is rather narrow due to the split images it provides in inclined views. On the other hand, even though multi‐view 3‐D displays have a wide viewing angle, motion parallax in them is discrete, depending on the number of views they show. By applying a stacked structure to multi‐view 3‐D displays, a wide‐viewing‐angle 3‐D display with smooth motion parallax was fabricated. Experimental results confirmed the viewing‐zone connection of DFD displays while the calculated results show the feasibility of stacked multi‐view displays.     

3‐D crosstalk and luminance uniformity from angular luminance profiles of multiview autostereoscopic 3‐D displays

Abstract— Autostereoscopic 3‐D display technologies enable a more immersive media experience by adding real depth to the visual content. However, the method used for the creation of a sensation of depth or stereo illusion contains several display design and content‐related issues that need to be carefully considered to maintain sufficient image quality. Conventionally, methods used for 3‐D image‐quality evaluations have been based on subjective testing. Optical measurements, in addition to subjective testing, can be used as an efficient tool for 3‐D display characterization. Objective characterization methods for autostereoscopic displays have been developed. How parameters affecting stereo image quality can be defined and measured, and how their effect on the stereo image quality can be evaluated have been investigated. Developed characterization methods are based on empirically gathered data. In this paper, previously presented methodology for two‐view displays is extended to cover autostereoscopic multiview displays. A distinction between displays where the change in content occurs in clear steps when the user moves in front of the display, and displays where the apparent movement of the objects is more continuous as a function of the head movement is made. Definitions for 3‐D luminance and luminance uniformity, which are equally important, as well as 3‐D crosstalk, which is the dominant factor in the evaluations of the perceived 3‐D image quality, is focused upon.     

Depth‐ and viewing‐angle‐enhanced 3‐D/2‐D switchable display system with high contrast ratio using multiple display devices and a lens array

Abstract— An improved 3‐D/2‐D switchable display system with enhanced depth and viewing angle by adding two LCD panels to an integral imaging system has been realized. The proposed system uses the see‐through property of an LCD panel and displays multiple sets of elemental images on the LCD panels to integrate them on multiple locations simultaneously. As a result, the depth of the 3‐D image can be enhanced. For wide viewing angles, the time‐multiplexing method was adopted by displaying mask patterns on the front LCD panel. In addition, another technique to increase the contrast ratio of the proposed system has also been developed. Some experimental results will be provided.     

Optical characterization of autostereoscopic 3‐D displays

Abstract— Display‐measurement methods different from conventional 2‐D display measurements are needed for verifying the optical characteristics of autostereoscopic (3‐D) displays and for comparing different 3‐D display technologies. Industry is lacking standardized measurement methods, and the reported results can not always be compared. The selected set of characteristics discussed in this paper and partly defining the quality of the 3‐D experience are crosstalk, viewing freedom, and optimum viewing distance. Also, more conventional display characteristics such as luminance are discussed, since the definitions for these characteristics in 3‐D mode usually differ from those used for the 2D displays. We have investigated how these chosen 3‐D display characteristics can be objectively measured from transmissive two‐view and multiview 3‐D displays. The scope of this article is to generally define those basic characteristics as well as the different measurement methods. Most of the 3‐D characteristics can be derived from the luminance and colors versus the viewing angle. Either a conoscopic or a goniometric measurement system can be used, as long as the angular and stray‐light properties are suitable and known. The characteristics and methods are currently discussed in the display‐quality standardization forums.     

High‐visibility 2‐D/3‐D LCD with HDDP arrangement and its optical characterization methods

Abstract— A 3.1‐in.‐diagonal 2‐D/3‐D LCD with a novel pixel arrangement, called horizontally double‐density pixels (HDDP), for high‐quality 3‐D images has been developed. 3‐D visibility has been improved by broadening the qualified stereoscopic viewing space (QSVS) where high‐quality 3‐D images can be seen. In order to evaluate the QSVS, optical characterization methods, based on the ergonomics for stereoscopy, such as 3‐D crosstalk, interocular luminance difference and 3‐D moiré have been proposed. The implementation results show that these methods can correctly evaluate high‐visibility autostereoscopic displays.     

Guidelines for an improved quality of experience in 3‐D TV and 3‐D mobile displays

Stereoscopic (3‐D) movies have become widely popular all over the world. In addition, 3‐D TVs and mobile devices have already been introduced to the consumer market. However, while some manufacturers are introducing 3‐D cameras and movie studios are using proprietary solutions, there are no guidelines for consistently capturing high‐quality stereoscopic content. In this paper, a comprehensive stereoscopic image and video database with content captured at various distances from the camera lenses and under different lighting conditions will be presented. Subjective tests to assess the perceived 3‐D quality of these videos and images, which were shown on displays of different sizes, have been conducted. In addition, the horizontal parallax of the content was adjusted to verify via subjective tests whether this change could increase the viewer's quality of experience. Finally, guidelines of acquisition distances between the cameras and the real scene will be published.     

Clinical applications for stereoscopic 3‐D displays

Abstract— Stereoscopic 3‐D digital imaging holds the promise of improving the detection, diagnosis, and treatment of disease as well as enhancing the training and preparation of medical professionals through use of stereoscopic 3‐D displays in concert with the many volumetric visualization techniques/modalities developed in recent years. While so‐called 3‐D graphics have improved the state of computer visualization in general, 3‐D displays make full use of the human‐visual perception, and thus can provide critical insight in complex computer‐generated and video 3‐D data. The stereo 3‐D applications reviewed in this paper include screening of breast cancer and diabetic retinopathy, visualization for minimally invasive surgery, and the teaching of anatomy. Also included is a discussion of ground‐breaking results from a stereo digital mammography clinical trial under way at Emory University.     

Development of a 42‐in. 2‐D/3‐D switchable display using multi‐view technology for public‐information‐display applications

Abstract— A 42‐in. 2‐D/3‐D switchable display operating in a parallax‐barrier‐type system consisting of liquid‐crystal displays (LCDs) has been developed. The system displays 2‐D images in full resolution, without any degradation to the original 2‐D images, and 3‐D autostereoscopic images with resolutions higher than SVGA with wide viewing zones electrically controlled by the parallax‐barrier system. The system is intended for use in public‐information displays (PIDs), a booming field, and as displays for gaming, medical, and simulation applications.     

Efficiency analysis for multi‐view spatially multiplexed autostereoscopic 2‐D/3‐D displays

Abstract— The wide‐viewing freedom often requested by users of autostereoscopic displays can be delivered by spatial multiplexing of multiple views in which a sequence of images is directed into respective directions by a suitable autostereoscopic optical system. This gives rise to two important design considerations — the optical efficiency and the resolution efficiency of the device. Optical efficiency is particularly important in portable devices such as cell phones. A comparison is given between lens and barrier systems for various spatial multiplexing arrangements. Parallax‐barrier displays suffer from reduced optical efficiency as the number of views presented increases whereas throughput efficiency is independent of the number of views for lens displays. An autostereoscopic optical system is presented for the emerging class of highly efficient polarizer‐free displays. Resolution efficiency can be evaluated by investigating quantitative and subjective comparisons of resolution losses and pixel appearance in each 3‐D image. Specifically, 2.2‐in.‐diagonal 2‐D/3‐D panel performance has been assessed using Nyquist boundaries, human‐visual contrast‐sensitivity models, and autostereoscopic‐display optical output simulations. Four‐view vertical Polarization‐Activated Microlens technology with either QVGA mosaic or VGA striped pixel arrangements is a strong candidate for an optimum compromise between display brightness, viewing angle, and 3‐D pixel appearance.     

Integral floating‐image display using two lenses with reduced distortion and enhanced depth

Abstract— An integral floating display (IFD) with a long depth range without floating lens distortion is proposed. Two lenses were used to reduce barrel distortion of the floating lens and three‐dimensional (3‐D) image deformation from object‐dependent longitudinal and lateral magnifications in the floating‐display system, combined with an integral imaging display. The distance between the floating lenses is the sum of their focal lengths. In the proposed configuration, lateral and longitudinal magnifications are constant regardless of the distance of the integrated 3‐D images, so the distortions from the distant‐dependent magnifications of the floating lens do not occur with the proposed method. In addition, the proposed floating system expands the depth range of the integral imaging display. As a result, the display can show a correct 3‐D floating image with a large depth range. Experimental results demonstrate that the proposed method successfully displays a 3‐D image without floating lens distortions across a large depth range.     

A 470 × 235‐ppi poly‐Si TFT‐LCD for high‐resolution 2‐D and 3‐D autostereoscopic displays

Abstract— We have developed a 470 × 235‐ppi poly‐Si TFT‐LCD with a novel pixel arrangement, called HDDP (horizontally double‐density pixels), for high‐resolution 2‐D and 3‐D autostereoscopic displays. 3‐D image quality is especially high in a lenticular‐lens‐equipped 3‐D mode because both the horizontal and vertical resolutions are high, and because these resolutions are equal. 3‐D and 2‐D images can be displayed simultaneously in the same picture. In addition, 3‐D images can be displayed anywhere and 2‐D characters can be made to appear at different depths with perfect legibility. No switching of 2‐D/3‐D modes is necessary, and the design's thin and uncomplicated structure makes it especially suitable for mobile terminals.     

3‐D displays — Technologies and testing methods

Abstract— This paper is a review of stereoscopic 3‐D display technologies and testing methods. The first part addresses the different 3‐D displays with focus on technologies. It gives both a background and the logic to group the technologies into categories. A family‐tree chartsummarizes the technology map. This categorization allows for logical grouping of test methods. The second part is a summary of testing procedures developed as part of the ICDM (International Committee for Display Metrology) standards group, affiliated with SID (Society of Information Display). Definitions to key test parameters pertinent to the evaluation of stereoscopic 3‐D displays including formulae development will be presented. This review paper can serve as an introduction to the 3‐D & Stereoscopic Displays chapter of the IDMS (Information Display Measurement Standard) version 1.0 that will be issued by the ICDM group later this year. The IDMS v1.0 will be the successor of the FPDM‐2 from VESA.     

A common approach to characterizing autostereoscopic and polarization‐based 3‐D displays

Abstract— Autostereoscopic and polarization‐based stereoscopic 3‐D displays recreate 3‐D images by providing different images in the two eyes of an observer. This aim is achieved differently for these two families of 3‐D displays. It is shown that viewing‐angle measurements can be applied to characterize both types of displays. Viewing‐angle luminance measurements are made at different locations on the display surface for each view emitted by the display. For autostereoscopic displays, a Fourier‐optics instrument with an ultra‐high‐angular‐resolution VCMaster3D is used. For polarization‐based displays, a standard Fourier‐optics instrument with additional glass filters is used. Then, what will be seen by an observer in front of the display is computed. Monocular and binocular quality criteria (left‐ and right‐eye contrast, 3‐D contrast) was used to quantify the ability to perceive depth for any observer position. Qualified monocular and binocular viewing spaces (QMVS and QBVS) are deduced. Precise 3‐D characteristics are derived such as maximum 3‐D contrast, optical viewing freedom in each direction, color shifts, and standard contrast. A quantitative comparison between displays of all types becomes possible.     

联合深度视频增强的3D-HEVC帧内编码快速算法

目的 针对高效3维视频编码标准（3D-HEVC）深度视频编码复杂度高和获取不准确的两个问题,现有算法单独进行处理,并没有进行联合优化。为了同时提升深度视频编码速度和编码效率,提出一种联合深度视频增强处理和帧内快速编码的方法。方法 首先,引入深度视频空域增强处理,消除深度视频中的虚假纹理信息,增强其空域相关性,为编码单元（CU）划分和预测模式选择提供进一步优化的空间;然后,针对增强处理过的深度视频的空域特征,利用纹理复杂度将CU进行分类,提前终止平坦CU的分割过程,减少了CU分割次数;最后,利用边缘强度对预测单元（PU）进行分类,跳过低边缘强度PU的深度模型模式。结果 实验结果表明,与原始3D-HEVC的算法相比,本文算法平均节省62.91%深度视频编码时间,并且在相同虚拟视点质量情况下节省4.63%的码率。与当前代表性的帧内低复杂度编码算法相比,本文算法深度视频编码时间进一步减少26.10%,相同虚拟视点质量情况下,编码码率节省5.20%。结论 该方法通过深度视频增强处理,保证了虚拟视点质量,提升了编码效率。对深度视频帧内编码过程中复杂度较高的CU划分和预测模式选择分别进行优化,减少了率失真代价计算次数,有效地降低了帧内编码复杂度。     

Design conditions for attractive reality in mobile‐type 3‐D display

Abstract— An autostereoscopic 3‐D display suitable for the mobile environment is prototyped and evaluated. First, the required conditions for a 3‐D display in a mobile environment are considered, and the three major requirements are clarified: small size, viewing‐position flexibility, and application support. An application of a mobile‐type 3‐D display should be different from that of a large‐sized 3‐D display because a mobile‐type 3‐D display cannot realize the feeling of immersion while large‐sized 3‐D displays can realize it easily. From this assumption, it is considered that it is important to realize the feeling to handle a 3‐D image. Three types of 3‐D displays are developed to satisfy these requirements. They are subjectively evaluated to confirm their attractiveness. Results of the tests show that intuitive interaction can increase the reality of the 3‐D image in the sense of unity and also can improve the solidity and depth impression of the 3‐D image.     

2‐D/3‐D switchable displays

Abstract— In this paper, the design of a lenticular‐based 2‐D/3‐D display for mobile applications is described. This display combines look‐around capability with good 3‐D resolution. In order to allow high‐resolution datagraphic applications, a concept based on actively switched lenses has been developed. A very noticeable problem for such displays is the occurrence of dark bands. Despite slanting the lenticular and defocusing the lens, banding becomes unacceptable when the display is viewed from an angle. As a solution, fractional viewing systems to reduce the banding intensity by almost two orders of magnitude is introduced. The resulting 3‐D display can be viewed from any horizontal direction without banding.     

Optical simulation for cross‐talk evaluation and improvement of autostereoscopic 3‐D displays with a projector array

Abstract— Multi‐view spatial‐multiplexed autostereoscopic 3‐D displays normally use a 2‐D image source and divide the pixels to generate perspective images. Due to the reduction in the resolution of each perspective image for a large view number, a super‐high‐resolution 2‐D image source is required to achieve 3‐D image quality close to the standard of natural vision. This paper proposes an approach by tiling multiple projection images with a low magnification ratio from a microdisplay to resolve the resolution issue. Placing a lenticular array in front of the tiled projection image can lead to an autostereoscopic display. Image distortion and cross‐talk issues resulting from the projection lens and pixel structure of the microdisplay have been addressed with proper selection of the active pixel and adequate pixel grouping and masking. Optical simulation has shown that a 37‐in. 12‐view autostereoscopic display with a full‐HD (1920 × 1080) resolution can be achieved with the proposed 3‐D architecture.     

Projection‐based head‐tracking 3‐D displays

Abstract— This paper describes the construction and operation of four 3‐D displays in which each display produces two images for each eye and thus fits into the category of projection‐based binocular stereoscopic displays. The four 3‐D displays described are pico‐projector‐based, liquid‐ crystal—on—silicon (LCOS) conventional projector‐based, 120‐Hz digital‐light‐processor (DLP) projector‐ based, and the HELIUM3D system. In the first three displays, images are produced on a direct‐view LCD whose conventional backlight is replaced with a projection illumination source that is controlled by a multi‐user head tracker; novel steering optics direct the projector output to regions referred to as exit pupils located at the viewers' eyes. In the HELIUM3D display, the image information is supplied by a horizontally scanned, fast, light valve whose output is controlled by a spatial light modulator (SLM) to direct images to the appropriate viewers' eyes. The current statu s and the multimodal potential of the HELIUM3D display are described.     

2‐D/3‐D displays based on switchable lenticulars

Abstract— An attractive concept for 3‐D displays is the one based on LCDs equipped with lenticular lenses. This enables autostereoscopic multiview 3‐D displays without a loss in brightness. A general issue in multiview 3‐D displays is their relatively low spatial resolution because the pixels are divided among the different views. To overcome this problem, we have developed switchable displays, using liquid‐crystal (LC) filled switchable lenticulars. In this way, it is possible to have a high‐brightness 3‐D display capable of fully exploiting the native 2‐D resolution of the underlying LCD. The feasibility of LC‐filled switchable lenticulars was shown in several applications. For applications in which it is advantageous to be able to display 3‐D and 2‐D content simultaneously, a 42‐in. locally switchable prototype having a matrix electrode structure was developed. These displays were realized using cylindrically shaped lenticular lenses in contact with LC. An alternative for these are lenticulars based on gradient‐index (GRIN) LC lenses. Preliminary results for such switchable GRIN lenses are presented as well.     

MUTED: Multi‐user 3‐D display

Abstract— Research described in this paper encompasses the design and building of glasses‐free (autostereoscopic) displays that utilize a direct‐view liquid‐crystal display whose backlight is provided by a projector and novel steering optics. This is controlled by the output of a multi‐user head‐position tracker. As the displays employ spatial multiplexing on a liquid‐crystal‐display screen, they are inherently 2‐D/3‐D switchable with 2‐D being achieved by simply displaying the same image in the left and right channels. Two prototypes are described in this paper; one incorporating a holographic projector and the other a conventional LCOS projector. The LCOS projector version addresses the limitations of brightness, cross‐talk, banding in the images, and laser stability that occur in the holographic projector version. The future development is considered and a comparison between the prototypes and with other 3‐D displays is given.