Surface Functionalization of Single Superparamagnetic Iron Oxide Nanoparticles for Targeted Magnetic Resonance Imaging

Magnetic resonance imaging (MRI), a non‐invasive, non‐radiative technique, is thought to lead to cellular or even molecular resolution if optimized targeted MR contrast agents are introduced. This would allow diagnosing progressive diseases in early stages. Here, it is shown that the high binding affinity of poly(ethylene glycol)‐gallol (PEG‐gallol) allows freeze drying and re‐dispersion of 9 ± 2‐nm iron oxide cores individually stabilized with ≈9‐nm‐thick stealth coatings, yielding particle stability for at least 20 months. Particle size, stability, and magnetic properties of PEGylated particles are compared to Feridex, a commercially available untargeted negative MR contrast agent. Biotin‐PEG(3400)‐gallol/methoxy‐PEG(550)‐gallol stabilized nanoparticles are further functionalized with biotinylated human anti‐VCAM‐1 antibodies using the biotin–neutravidin linkage. Binding kinetics and excellent specificity of these nanoparticles are demonstrated using quartz crystal microbalance with dissipation monitoring (QCM‐D). These MR contrast agents can be functionalized with any biotinylated ligand at controlled ligand surface density, rendering them a versatile research tool.     

Engineering On‐Surface Spin Crossover: Spin‐State Switching in a Self‐Assembled Film of Vacuum‐Sublimable Functional Molecule

The realization of spin‐crossover (SCO)‐based applications requires study of the spin‐state switching characteristics of SCO complex molecules within nanostructured environments, especially on surfaces. Except for a very few cases, the SCO of a surface‐bound thin molecular film is either quenched or heavily altered due to: (i) molecule–surface interactions and (ii) differing intermolecular interactions in films relative to the bulk. By fabricating SCO complexes on a weakly interacting surface, the interfacial quenching problem is tackled. However, engineering intermolecular interactions in thin SCO active films is rather difficult. Here, a molecular self‐assembly strategy is proposed to fabricate thin spin‐switchable surface‐bound films with programmable intermolecular interactions. Molecular engineering of the parent complex system [Fe(H₂B(pz)₂)₂(bpy)] (pz = pyrazole, bpy = 2,2′‐bipyridine) with a dodecyl (C₁₂) alkyl chain yields a classical amphiphile‐like functional and vacuum‐sublimable charge‐neutral Fe^II complex, [Fe(H₂B(pz)₂)₂(C₁₂‐bpy)] (C₁₂‐bpy = dodecyl[2,2′‐bipyridine]‐5‐carboxylate). Both the bulk powder and 10 nm thin films sublimed onto either quartz glass or SiO_x surfaces of the complex show comparable spin‐state switching characteristics mediated by similar lamellar bilayer like self‐assembly/molecular interactions. This unprecedented observation augurs well for the development of SCO‐based applications, especially in molecular spintronics.     

Polarity‐Switchable Symmetric Graphite Batteries with High Energy and High Power Densities

Multifunctional batteries with enhanced safety performance have received considerable attention for their applications at extreme conditions. However, few batteries can endure a mix‐up of battery polarity during charging, a common wrong operation of rechargeable batteries. Herein, a polarity‐switchable battery based on the switchable intercalation feature of graphite is demonstrated. The unique redox‐amphoteric intercalation behavior of graphite allows a reversible switching of graphite between anode and cathode, thus enabling polarity‐switchable symmetric graphite batteries. The large potential gap between anion and cation intercalation delivers a high midpoint device voltage (≈average voltage) of ≈4.5 V. Further, both the graphite anode and cathode are kinetically activated during the polarity switching. Consequently, polarity‐switchable symmetric graphite batteries exhibit a remarkable cycling stability (96% capacity retention after 500 cycles), a high power density of 8.66 kW kg^?1, and a high energy density of 227 Wh kg^?1 (calculated based on the total weight of active materials in both anode and cathode), which are superior to other symmetric batteries and recently reported dual‐graphite or dual‐carbon batteries. This work will inspire the development of new multifunctional energy‐storage devices based on novel materials and electrolyte systems.     

Bionanosphere Lithography via Hierarchical Peptide Self‐Assembly of Aromatic Triphenylalanine

A nanolithographic approach based on hierarchical peptide self‐assembly is presented. An aromatic peptide of N‐(t‐Boc)‐terminated triphenylalanine is designed from a structural motif for the β‐amyloid associated with Alzheimer's disease. This peptide adopts a turnlike conformation with three phenyl rings oriented outward, which mediate intermolecular π–π stacking interactions and eventually facilitate highly crystalline bionanosphere assembly with both thermal and chemical stability. The self‐assembled bionanospheres spontaneously pack into a hexagonal monolayer at the evaporating solvent edge, constituting evaporation‐induced hierarchical self‐assembly. Metal nanoparticle arrays or embossed Si nanoposts could be successfully created from the hexagonal bionanosphere array masks in conjunction with a conventional metal‐evaporation or etching process. Our approach represents a bionanofabrication concept that biomolecular self‐assembly is hierarchically directed to establish a straightforward nanolithography compatible with conventional device‐fabrication processes.     

A Poly(Propyleneimine) Dendrimer‐Based Polyplex‐System for Single‐Chain Antibody‐Mediated Targeted Delivery and Cellular Uptake of SiRNA

Therapeutics based on small interfering RNAs (siRNAs) offer a great potential to treat so far incurable diseases or metastatic cancer. However, the broad application of siRNAs using various nonviral carrier systems is hampered by unspecific toxic side effects, poor pharmacokinetics due to unwanted delivery of siRNA‐loaded nanoparticles into nontarget organs, or rapid renal excretion. In order to overcome these obstacles, several targeting strategies using chemically linked antibodies and ligands have emerged. This study reports a new modular polyplex carrier system for targeted delivery of siRNA, which is based on transfection‐disabled maltose‐modified poly(propyleneimine)‐dendrimers (mal‐PPI) bioconjugated to single chain fragment variables (scFvs). To achieve targeted delivery into tumor cells expressing the epidermal growth factor receptor variant III (EGFRvIII), monobiotinylated anti‐EGFRvIII scFv fused to a Propionibacterium shermanii transcarboxylase‐derived biotinylation acceptor (P‐BAP) is bioconjugated to mal‐PPI through a novel coupling strategy solely based on biotin–neutravidin bridging. In contrast to polyplexes containing an unspecific control scFv‐P‐BAP, the generated EGFRvIII‐specific polyplexes are able to exclusively deliver siRNA to tumor cells and tumors by receptor‐mediated endocytosis. These results suggest that receptor‐mediated uptake of otherwise noninternalized mal‐PPI‐based polyplexes is a promising avenue to improve siRNA therapy of cancer, and introduce a novel strategy for modular bioconjugation of protein ligands to nanoparticles.     

A Nanoparticle‐Decorated Biomolecule‐Responsive Polymer Enables Robust Signaling Cascade for Biosensing

To meet the increasing demands for ultrasensitivity in monitoring trace amounts of low‐abundance early biomarkers or environmental toxins, the development of a robust sensing system is urgently needed. Here, a novel signal cascade strategy is reported via an ultrasensitive polymeric sensing system (UPSS) composed of gold nanoparticle (gNP)‐decorated polymer, which enables gNP aggregation in polymeric network and electrical conductance change upon specific aptamer‐based biomolecular recognition. Ultralow concentrations of thrombin (10^?18m ) as well as a low molecular weight anatoxin (165 Da, 10^?14m ) are detected selectively and reproducibly. The biomolecular recognition induced polymeric network shrinkage responses as well as dose‐dependent responses of the UPSS are validated using in situ real‐time atomic‐force microscopy, representing the first instance of real‐time detection of biomolecular binding‐induced polymer shrinkage in soft matter. Furthermore, in situ real‐time confocal laser scanning microscopy imaging reveals the dynamic process of gNP aggregation responses upon biomolecular binding.     

Solution‐Processed Lead Iodide for Ultrafast All‐Optical Switching of Terahertz Photonic Devices

Solution‐processed lead iodide (PbI₂) governs the charge transport characteristics in the hybrid metal halide perovskites. Besides being a precursor in enhancing the performance of perovskite solar cells, PbI₂ alone offers remarkable optical and ultrasensitive photoresponsive properties that remain largely unexplored. Here, the photophysics and the ultrafast carrier dynamics of the solution processed PbI₂ thin film is probed experimentally. A PbI₂ integrated metamaterial photonic device with switchable picosecond time response at extremely low photoexcitation fluences is demonstrated. Further, findings show strongly confined terahertz field induced tailoring of sensitivity and switching time of the metamaterial resonances for different thicknesses of PbI₂ thin film. The approach has two far reaching consequences: the first lead‐iodide‐based ultrafast photonic device and resonantly confined electromagnetic field tailored transient nonequilibrium dynamics of PbI₂ which could also be applied to a broad range of semiconductors for designing on‐chip, ultrafast, all‐optical switchable photonic devices.     

Nanolattices of Switchable DNA‐Based Motors

Miniaturization is an important aspect of device fabrication. Despite the advancements of modern top‐down approaches, scaling‐down to the sub‐nanometer size is still a challenge. As an alternative, bottom‐up approaches, such as the use of DNA as an engineering material, are therefore emerging, allowing control of matter at the single‐molecule level. A DNA‐based self‐assembly method for the construction of switchable DNA devices is descrbied here based on G‐quadruplex moieties, which are patterned on quasi‐planar DNA arrays with nanoscale precision. The reversible switching of the devices is triggered by addition of DNA sequences (‘fuels’) and translated into linear extension/contractile movements. The conformational change of the devices was visualized by atomic force microscopy and FRET spectroscopy. Steady state fluorescence spectroscopy indicated that scaffolding of the G4 motors to either individual tiles or extended superlattices had no significant impact on the switching and optical performance of the system. However, time‐resolved spectroscopy revealed that ordering in the microstructural environment enhances the fraction of molecules subject to FRET. Altogether, our study confirms that DNA superstructures are well‐suited scaffolds for accommodation of mechanically switchable units and thus opens the door to the development of more sophisticated nanomechanical devices.     

An immunosensor for haemoglobin based on impedimetric properties of a new mixed self-assembled monolayer

A novel impedimetric immunosensor for the detection of haemoglobin has been developed by mixed self-assembled monolayers on Au. First, a mixed self-assembled monolayer (SAMs) consisting of 1,2 dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-(biotinyl) (biotinyl-PE) and 16-mercaptohexadecanoic acid (MHDA) on gold electrodes was studied. The conformational properties of the SAMs were characterised by cyclic voltammetry and impedance spectroscopy. After blocking non-specific binding sites in the mixed monolayer using non-specific IgG, neutravidin was used to bind to biotinyl sites present in the mixed monolayer. Finally, biotinylated anti-haemoglobin IgG was immobilised to the tethered neutravidin. The membrane resistance R_m, obtained from the assembly, decreased gradually after the addition of non-specific IgG, neutravidin and anti-haemoglobin to the monolayer. This decrease could be attributed to a rearrangement in the structure of the SAMs. The detection of antibody–antigen reaction demonstrates that the potentiometric immunosensor exhibited high sensitivity and a detection limit of 20 ng/ml (approximately 0.3 nM).     

Spin‐Orbit Torque Switching of a Nearly Compensated Ferrimagnet by Topological Surface States

Utilizing spin‐orbit torque (SOT) to switch a magnetic moment provides a promising route for low‐power‐dissipation spintronic devices. Here, the SOT switching of a nearly compensated ferrimagnet Gd_x(FeCo)_1?x by the topological insulator [Bi₂Se₃ and (BiSb)₂Te₃] is investigated at room temperature. The switching current density of (BiSb)₂Te₃ (1.20 × 10⁵ A cm^?2) is more than one order of magnitude smaller than that in conventional heavy‐metal‐based structures, which indicates the ultrahigh efficiency of charge‐spin conversion (>1) in topological surface states. By tuning the net magnetic moment of Gd_x(FeCo)_1?x via changing the composition, the SOT efficiency has a significant enhancement (6.5 times) near the magnetic compensation point, and at the same time the switching speed can be as fast as several picoseconds. Combining the topological surface states and the nearly compensated ferrimagnets provides a promising route for practical energy‐efficient and high‐speed spintronic devices.     

Molecular Approach to Electrochemically Switchable Monolayer MoS2 Transistors

As Moore's law is running to its physical limit, tomorrow's electronic systems can be leveraged to a higher value by integrating “More than Moore” technologies into CMOS digital circuits. The hybrid heterostructure composed of two-dimensional (2D) semiconductors and molecular materials represents a powerful strategy to confer new properties to the former components, realize stimuli-responsive functional devices, and enable diversification in “More than Moore” technologies. Here, an ionic liquid (IL) gated 2D MoS₂ field-effect transistor (FET) with molecular functionalization is fabricated. The suitably designed ferrocene-substituted alkanethiol molecules not only improve the FET performance, but also show reversible electrochemical switching on the surface of MoS₂. Field-effect mobility of monolayer MoS₂ reaches values as high as ≈116 cm² V⁻¹ s⁻¹ with I_on/I_off ratio exceeding 10⁵. Molecules in their neutral or charged state impose distinct doping effect, efficiently tuning the electron density in monolayer MoS₂. It is noteworthy that the joint doping effect from IL and switchable molecules results in the steep subthreshold swing of MoS₂ FET in the backward sweep. These results demonstrate that the device architecture represents an unprecedented and powerful strategy to fabricate switchable 2D FET with a chemically programmed electrochemical signal as a remote control, paving the road toward novel functional devices.     

Light‐Induced Contraction/Expansion of 1D Photoswitchable Metallopolymer Monitored at the Solid–Liquid Interface

The use of a bottom‐up approach to the fabrication of nanopatterned functional surfaces, which are capable to respond to external stimuli, is of great current interest. Herein, the preparation of light‐responsive, linear supramolecular metallopolymers constituted by the ideally infinite repetition of a ditopic ligand bearing an azoaryl moiety and Co(II) coordination nodes is described. The supramolecular polymerization process is followed by optical spectroscopy in dimethylformamide solution. Noteworthy, a submolecularly resolved scanning tunneling microscopy (STM) study of the in situ reversible trans‐to‐cis photoisomerization of a photoswitchable metallopolymer that self‐assembles into 2D crystalline patterns onto a highly oriented pyrolytic graphite surface is achieved for the first time. The STM analysis of the nanopatterned surfaces is corroborated by modeling the physisorbed species onto a graphene slab before and after irradiation by means of density functional theory calculation. Significantly, switching of the monolayers consisting of supramolecular Co(II) metallopolymer bearing trans‐azoaryl units to a novel pattern based on cis isomers can be triggered by UV light and reversed back to the trans conformer by using visible light, thereby restoring the trans‐based supramolecular 2D packing. These findings represent a step forward toward the design and preparation of photoresponsive “smart” surfaces organized with an atomic precision.     

Gate‐Tunable and Multidirection‐Switchable Memristive Phenomena in a Van Der Waals Ferroelectric

Memristive devices have been extensively demonstrated for applications in nonvolatile memory, computer logic, and biological synapses. Precise control of the conducting paths associated with the resistance switching in memristive devices is critical for optimizing their performances including ON/OFF ratios. Here, gate tunability and multidirectional switching can be implemented in memristors for modulating the conducting paths using hexagonal α‐In₂Se₃, a semiconducting van der Waals ferroelectric material. The planar memristor based on in‐plane (IP) polarization of α‐In₂Se₃ exhibits a pronounced switchable photocurrent, as well as gate tunability of the channel conductance, ferroelectric polarization, and resistance‐switching ratio. The integration of vertical α‐In₂Se₃ memristors based on out‐of‐plane (OOP) polarization is demonstrated with a device density of 7.1 × 10⁹ in.^?2 and a resistance‐switching ratio of well over 10³. A multidirectionally operated α‐In₂Se₃ memristor is also proposed, enabling the control of the OOP (or IP) resistance state directly by an IP (or OOP) programming pulse, which has not been achieved in other reported memristors. The remarkable behavior and diverse functionalities of these ferroelectric α‐In₂Se₃ memristors suggest opportunities for future logic circuits and complex neuromorphic computing.     

Rationally Designed Peptide Interface for Potential Modulated Cell Adhesion and Migration

Conformational changes of peptides are critically important in the control of their biological activities. Here, a quaternary ammonium group‐terminated RGD‐containing peptide (RGD‐NMe₃) is designed, which may undergo reversible conformational switch upon different electrochemical potentials. Potential responsive peptide interfaces are constructed on gold substrates with RGD‐NMe₃ in a tetra (ethylene glycol) background. It is demonstrated that by applying positive and negative potentials, the RGD peptide can be reversibly switched between linear and cyclic conformation, which can be used in reversible controlling of cell adhesion/migration on the interface. Furthermore, by combining microfluidics, adhesion of the cells in specific areas on the surface and subsequent directional migration of the cells can be controlled. It is believed that this straightforward potential modulation mechanism for peptide conformation control may find a wide use in design responsive peptide interfaces.     

Molecular Switch Controlled by Pulsed Bias Voltages

Recent experiments have shown that the current–voltage characteristics (I–V) of BPDN‐DT (bipyridyl‐dinitro oligophenylene‐ethynylene dithiol) can be switched in a very controlled manner between “on” and “off” traces by applying a pulse in a bias voltage, V_bias. Here, the polaron formation energies are calculated to check a frequently held belief, namely, that the polaron formation can explain the observed bistability. These results are not consistent with such a mechanism. Instead, a conformational reorientation is proposed. The molecule carries an intrinsic dipole moment, which couples to V_bias. Ramping V_bias exerts a force on the dipole that can reorient (“rotate”) the molecule from the ground state (“off”) into a metastable configuration (“on”) and back. By elaborated electronic structure calculations, a specific path for this rotation is identified through the molecule's conformational phase space. It is shown that this path has sufficiently high barriers to inhibit thermal instability but that the molecule can still be switched in the voltage range of the junction stability. The theoretical I–Vs qualitatively reproduce the key experimental observations. A proposal for the experimental verification of the alternative mechanism of conductance switching is presented.     

Non‐Volatile ReRAM Devices Based on Self‐Assembled Multilayers of Modified Graphene Oxide 2D Nanosheets

2D nanomaterials have been actively utilized in non‐volatile resistive switching random access memory (ReRAM) devices due to their high flexibility, 3D‐stacking capability, simple structure, transparency, easy fabrication, and low cost. Herein, it demonstrates re‐writable, bistable, transparent, and flexible solution‐processed crossbar ReRAM devices utilizing graphene oxide (GO) based multilayers as active dielectric layers. The devices employ single‐ or multi‐component‐based multilayers composed of positively charged GO (N‐GO(+) or NS‐GO(+)) with/without negatively charged GO(‐) using layer‐by‐layer assembly method, sandwiched between Al bottom and Au top electrodes. The device based on the multi‐component active layer Au/[N‐GO(+)/GO(‐)]_n/Al/PES shows higher ON/OFF ratio of ≈10⁵ with switching voltage of ?1.9 V and higher retention stability (≈10⁴ s), whereas the device based on single component (Au/[N‐GO(+)]_n/Al/PES) shows ≈10³ ON/OFF ratio at ±3.5 V switching voltage. The superior ReRAM properties of the multi‐component‐based device are attributed to a higher coating surface roughness. The Au/[N‐GO(+)/GO(–)]_n/Al/PES device prepared from lower GO concentration (0.01%) exhibits higher ON/OFF ratio (≈10⁹) at switching voltage of ±2.0 V. However, better stability is achieved by increasing the concentration from 0.01% to 0.05% of all GO‐based solutions. It is found that the devices containing MnO₂ in the dielectric layer do not improve the ReRAM performance.     

Ellipsometric study of optical switching processes of Mg-Ni based switchable mirrors

Optical switching processes of Mg-Ni based switchable mirrors were studied “in situ” using spectroscopic ellipsometry. Ellipsometric angles Ψ and Δ of the switchable mirrors varied drastically as a result of hydrogenation and dehydrogenation. These variations are due to transformation between metal and semiconductor of Mg-Ni layers. We have clarified the switching processes by analyzing these variations using the following two steps. First, we evaluated dielectric functions of five materials: metal, hydrogen-solid-solution, hydride states of Mg-Ni alloy, and metal and hydride states of Pd. Using these dielectric functions, we then varied thickness and concentration of each layer.     

Single‐Layer Ternary Chalcogenide Nanosheet as a Fluorescence‐Based “Capture‐Release” Biomolecular Nanosensor

The novel application of two‐dimensional (2D) single‐layer ternary chalcogenide nanosheets as “capture‐release” fluorescence‐based biomolecular nanosensors is demonstrated. Fluorescently labeled biomolecular probe is first captured by the ultrathin Ta₂NiS₅ nanosheets and then released upon adding analyte containing a target biomolecule due to the higher probe‐target affinity. Here, the authors use a nucleic acid probe for the model target biomolecule Plasmodium lactate dehydrogenase, which is an important malarial biomarker. The ultrathin Ta₂NiS₅ nanosheet serves as a highly efficient fluorescence quencher and the nanosensor developed from the nanosheet is highly sensitive and specific toward the target biomolecule. Apart from the specificity toward the target biomolecule in homogeneous solutions, the developed nanosensor is capable of detecting and differentiating the target in heterogeneous solutions consisting of either a mixture of biomolecules or serum, with exceptional specificity. The simplicity of the “capture‐release” method, by eliminating the need for preincubation of the probe with the test sample, may facilitate further development of portable and rapid biosensors. The authors anticipate that this ternary chalcogenide nanosheet‐based biomolecular nanosensor will be useful for the rapid detection and differentiation of a wide range of chemical and biological species.     

Modelling of reinforced‐concrete structures providing crack‐spacing based on X‐FEM,ED‐FEM and novel operator split solution procedure

In this work, we present a novel approach to the finite element modelling of reinforced‐concrete (RC) structures that provides the details of the constitutive behavior of each constituent (concrete, steel and bond‐slip), while keeping formally the same appearance as the classical finite element model. Each component constitutive behavior can be brought to fully non‐linear range, where we can consider cracking (or localized failure) of concrete, the plastic yielding and failure of steel bars and bond‐slip at concrete steel interface accounting for confining pressure effects. The standard finite element code architecture is preserved by using embedded discontinuity (ED‐FEM) and extended (X‐FEM) finite element strain representation for concrete and slip, respectively, along with the operator split solution method that separates the problem into computing the deformations of RC (with frozen slip) and the current value of the bond‐slip. Several numerical examples are presented in order to illustrate very satisfying performance of the proposed methodology. Copyright © 2010 John Wiley & Sons, Ltd.     

Controlling binding site densities on glass surfaces

The density of surface-immobilized ligands or binding sites is an important issue for the development of sensors, array- or chip-based assays, and single-molecule detection methods. The goal of this research is to control the binding site density of reactive ligands on surfaces by diluting surface amine groups in self-assembled and cross-linked monolayers on glass prepared from solutions containing very low concentrations of (3-aminopropyl)triethoxysilane (APTES) and much higher concentrations of (2-cyanoethyl)triethoxysilane. The surface amine sites are suitable for attaching labels and ligands by reaction with succinimidyl ester reagents. Labeling the amine sites with fluorescent molecules and imaging the single molecules with fluorescence microscopy provides a means of determining the density of amine sites on the surface, which were incorporated into the self-assembled monolayer with micrometer spacings in proportion to the concentration of APTES in the synthesis. Biotin ligands were also bound to these surface amine sites using a succinimidyl ester linker, and the immobilized biotin was then reacted with either streptavidin-conjugated gold colloid particles or fluorescently labeled neutravidin. Imaging of these samples yields consistent amine and biotin site coverages, indicating that quantitative control and chemical conversion of binding sites can be achieved at very low (<10(-7)) fractions of a monolayer.